Status of ADI AD1888

Status of ADI AD1888

[Carlos Fernandez Sanz]

Hi,

Is the ADI AD1888 chipset supported yet? I'm asking because it doesn't seem
to work out-of-the-box with Alsa 1.0.1, however Asus does have a driver in
their page (see download area for their P4P800S motherboard), but it's for
Alsa 0.9.

I have never developed an Alsa driver (or any driver for that matter) but
I'm a linux programmer so if no effort has been done yet I could try doing
the port.



-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

Re: Status of ADI AD1888

[David Lloyd]

On Fri, 23 Jan 2004, Carlos Fernandez Sanz wrote:

> Hi,
> 
> Is the ADI AD1888 chipset supported yet? I'm asking because it doesn't
> seem to work out-of-the-box with Alsa 1.0.1, however Asus does have a
> driver in their page (see download area for their P4P800S motherboard),
> but it's for Alsa 0.9.

I'm fairly certain that you can use the intel8x0 driver for P4P800S.

- D


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

Re: Status of ADI AD1888

[Carlos Fernandez Sanz]

David,

Apparently not. I've been doing some research and while the driver loads,
etc, I get no sound (everything to the max in the mixer, speakers plugged,
etc :-)). If I hadn't find anyone else with the exact same problem I would
just assume I'm plain stupid (or add item to the list proving it)...

As a matter of fact just today in the linux-dev mailing list a couple of
guys say the same thing (see Alsa vs OSS topic).


----- Original Message ----- 
From: "David Lloyd" <dmlloyd@tds.net>
To: "Carlos Fernandez Sanz" <cfs-alsa@nisupu.com>
Cc: <alsa-devel@lists.sourceforge.net>
Sent: Friday, January 23, 2004 20:19
Subject: Re: [Alsa-devel] Status of ADI AD1888


> On Fri, 23 Jan 2004, Carlos Fernandez Sanz wrote:
> 
> > Hi,
> > 
> > Is the ADI AD1888 chipset supported yet? I'm asking because it doesn't
> > seem to work out-of-the-box with Alsa 1.0.1, however Asus does have a
> > driver in their page (see download area for their P4P800S motherboard),
> > but it's for Alsa 0.9.
> 
> I'm fairly certain that you can use the intel8x0 driver for P4P800S.
> 
> - D
> 
> 
> -------------------------------------------------------
> The SF.Net email is sponsored by EclipseCon 2004
> Premiere Conference on Open Tools Development and Integration
> See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
> http://www.eclipsecon.org/osdn
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
> 


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

Re: Status of ADI AD1888

[Takashi Iwai]

At Fri, 23 Jan 2004 20:50:36 +0100,
Carlos Fernandez Sanz wrote:
> 
> David,
> 
> Apparently not. I've been doing some research and while the driver loads,
> etc, I get no sound (everything to the max in the mixer, speakers plugged,
> etc :-)). If I hadn't find anyone else with the exact same problem I would
> just assume I'm plain stupid (or add item to the list proving it)...

AD1888 is an ac97 codec, so definitely intel8x0 is the right driver.

show /etc/asound.state (after running "alsactl store") and
/proc/asound/card0/codec97#0/* files for debugging.


Takashi


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn