* [PATCH v4 0/3] Add support for NetCube Systems OpenNMC (dobermann)
@ 2026-06-06 20:54 ` Lukas Schmid
0 siblings, 0 replies; 14+ messages in thread
From: Lukas Schmid @ 2026-06-06 20:54 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai,
Jernej Skrabec, Samuel Holland, Paul Walmsley, Palmer Dabbelt,
Albert Ou, Alexandre Ghiti, Maxime Ripard
Cc: Lukas Schmid, devicetree, linux-arm-kernel, linux-sunxi,
linux-kernel, linux-riscv
This series adds support for the NetCube Systems OpenNMC.
Sorry for the quick resend. This v4 includes the corrected Makefile
target name.
Changes in v4:
- fix the ARM Makefile target name for the new board
Changes in v3:
- actually add the Makefile changes
Changes in v2:
- fixed ordering of compatible enum
- fixed gpio line names
Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li>
---
Lukas Schmid (3):
dt-bindings: arm: sunxi: Add NetCube Systems OpenNMC (dobermann)
riscv: dts: allwinner: d1s-t113: Add uart4 pinctrl required by NetCube
Systems OpenNMC
ARM: dts: sunxi: add support for NetCube Systems OpenNMC (dobermann)
.../devicetree/bindings/arm/sunxi.yaml | 1 +
arch/arm/boot/dts/allwinner/Makefile | 2 +
.../sun8i-t113s-netcube-dobermann.dts | 149 ++++++++++++++++++
.../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 6 +
4 files changed, 158 insertions(+)
create mode 100644 arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts
--
2.47.3
^ permalink raw reply [flat|nested] 14+ messages in thread* [PATCH v4 0/3] Add support for NetCube Systems OpenNMC (dobermann) @ 2026-06-06 20:54 ` Lukas Schmid 0 siblings, 0 replies; 14+ messages in thread From: Lukas Schmid @ 2026-06-06 20:54 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Maxime Ripard Cc: Lukas Schmid, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel, linux-riscv This series adds support for the NetCube Systems OpenNMC. Sorry for the quick resend. This v4 includes the corrected Makefile target name. Changes in v4: - fix the ARM Makefile target name for the new board Changes in v3: - actually add the Makefile changes Changes in v2: - fixed ordering of compatible enum - fixed gpio line names Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> --- Lukas Schmid (3): dt-bindings: arm: sunxi: Add NetCube Systems OpenNMC (dobermann) riscv: dts: allwinner: d1s-t113: Add uart4 pinctrl required by NetCube Systems OpenNMC ARM: dts: sunxi: add support for NetCube Systems OpenNMC (dobermann) .../devicetree/bindings/arm/sunxi.yaml | 1 + arch/arm/boot/dts/allwinner/Makefile | 2 + .../sun8i-t113s-netcube-dobermann.dts | 149 ++++++++++++++++++ .../boot/dts/allwinner/sunxi-d1s-t113.dtsi | 6 + 4 files changed, 158 insertions(+) create mode 100644 arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts -- 2.47.3 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v4 1/3] dt-bindings: arm: sunxi: Add NetCube Systems OpenNMC (dobermann) 2026-06-06 20:54 ` Lukas Schmid @ 2026-06-06 20:54 ` Lukas Schmid -1 siblings, 0 replies; 14+ messages in thread From: Lukas Schmid @ 2026-06-06 20:54 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Maxime Ripard Cc: Lukas Schmid, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel, linux-riscv The OpenNMC is an open replacement for APC SmartSlot management cards based on the Nagami System-on-Module. Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> --- Documentation/devicetree/bindings/arm/sunxi.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index e6443c266fa1..077b65507645 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -598,6 +598,7 @@ properties: - description: NetCube Systems Nagami SoM based boards items: - enum: + - netcube,dobermann - netcube,nagami-basic-carrier - netcube,nagami-keypad-carrier - const: netcube,nagami -- 2.47.3 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v4 1/3] dt-bindings: arm: sunxi: Add NetCube Systems OpenNMC (dobermann) @ 2026-06-06 20:54 ` Lukas Schmid 0 siblings, 0 replies; 14+ messages in thread From: Lukas Schmid @ 2026-06-06 20:54 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Maxime Ripard Cc: Lukas Schmid, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel, linux-riscv The OpenNMC is an open replacement for APC SmartSlot management cards based on the Nagami System-on-Module. Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> --- Documentation/devicetree/bindings/arm/sunxi.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index e6443c266fa1..077b65507645 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -598,6 +598,7 @@ properties: - description: NetCube Systems Nagami SoM based boards items: - enum: + - netcube,dobermann - netcube,nagami-basic-carrier - netcube,nagami-keypad-carrier - const: netcube,nagami -- 2.47.3 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v4 1/3] dt-bindings: arm: sunxi: Add NetCube Systems OpenNMC (dobermann) 2026-06-06 20:54 ` Lukas Schmid @ 2026-06-07 8:25 ` Krzysztof Kozlowski -1 siblings, 0 replies; 14+ messages in thread From: Krzysztof Kozlowski @ 2026-06-07 8:25 UTC (permalink / raw) To: Lukas Schmid Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Maxime Ripard, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel, linux-riscv On Sat, Jun 06, 2026 at 10:54:41PM +0200, Lukas Schmid wrote: > The OpenNMC is an open replacement for APC SmartSlot management cards > based on the Nagami System-on-Module. > > Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> > --- > Documentation/devicetree/bindings/arm/sunxi.yaml | 1 + > 1 file changed, 1 insertion(+) Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Best regards, Krzysztof ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4 1/3] dt-bindings: arm: sunxi: Add NetCube Systems OpenNMC (dobermann) @ 2026-06-07 8:25 ` Krzysztof Kozlowski 0 siblings, 0 replies; 14+ messages in thread From: Krzysztof Kozlowski @ 2026-06-07 8:25 UTC (permalink / raw) To: Lukas Schmid Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Maxime Ripard, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel, linux-riscv On Sat, Jun 06, 2026 at 10:54:41PM +0200, Lukas Schmid wrote: > The OpenNMC is an open replacement for APC SmartSlot management cards > based on the Nagami System-on-Module. > > Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> > --- > Documentation/devicetree/bindings/arm/sunxi.yaml | 1 + > 1 file changed, 1 insertion(+) Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Best regards, Krzysztof _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v4 2/3] riscv: dts: allwinner: d1s-t113: Add uart4 pinctrl required by NetCube Systems OpenNMC 2026-06-06 20:54 ` Lukas Schmid @ 2026-06-06 20:54 ` Lukas Schmid -1 siblings, 0 replies; 14+ messages in thread From: Lukas Schmid @ 2026-06-06 20:54 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Maxime Ripard Cc: Lukas Schmid, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel, linux-riscv Added the "uart4_pb_pins" pinctrl used by the OpenNMC Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> --- arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index 82cc85acccb1..00fddedfa36f 100644 --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi @@ -191,6 +191,12 @@ uart3_pb_pins: uart3-pb-pins { pins = "PB6", "PB7"; function = "uart3"; }; + + /omit-if-no-ref/ + uart4_pb_pins: uart4-pb-pins { + pins = "PB2", "PB3"; + function = "uart4"; + }; }; ccu: clock-controller@2001000 { -- 2.47.3 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v4 2/3] riscv: dts: allwinner: d1s-t113: Add uart4 pinctrl required by NetCube Systems OpenNMC @ 2026-06-06 20:54 ` Lukas Schmid 0 siblings, 0 replies; 14+ messages in thread From: Lukas Schmid @ 2026-06-06 20:54 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Maxime Ripard Cc: Lukas Schmid, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel, linux-riscv Added the "uart4_pb_pins" pinctrl used by the OpenNMC Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> --- arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index 82cc85acccb1..00fddedfa36f 100644 --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi @@ -191,6 +191,12 @@ uart3_pb_pins: uart3-pb-pins { pins = "PB6", "PB7"; function = "uart3"; }; + + /omit-if-no-ref/ + uart4_pb_pins: uart4-pb-pins { + pins = "PB2", "PB3"; + function = "uart4"; + }; }; ccu: clock-controller@2001000 { -- 2.47.3 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v4 2/3] riscv: dts: allwinner: d1s-t113: Add uart4 pinctrl required by NetCube Systems OpenNMC 2026-06-06 20:54 ` Lukas Schmid @ 2026-06-08 7:38 ` Andre Przywara -1 siblings, 0 replies; 14+ messages in thread From: Andre Przywara @ 2026-06-08 7:38 UTC (permalink / raw) To: Lukas Schmid, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Maxime Ripard Cc: devicetree, linux-arm-kernel, linux-sunxi, linux-kernel, linux-riscv Hi, On 6/6/26 22:54, Lukas Schmid wrote: > Added the "uart4_pb_pins" pinctrl used by the OpenNMC Checked against the datasheet: Reviewed-by: Andre Przywara <andre.przywara@arm.com> Cheers, Andre > > Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> > --- > arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > index 82cc85acccb1..00fddedfa36f 100644 > --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > @@ -191,6 +191,12 @@ uart3_pb_pins: uart3-pb-pins { > pins = "PB6", "PB7"; > function = "uart3"; > }; > + > + /omit-if-no-ref/ > + uart4_pb_pins: uart4-pb-pins { > + pins = "PB2", "PB3"; > + function = "uart4"; > + }; > }; > > ccu: clock-controller@2001000 { ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4 2/3] riscv: dts: allwinner: d1s-t113: Add uart4 pinctrl required by NetCube Systems OpenNMC @ 2026-06-08 7:38 ` Andre Przywara 0 siblings, 0 replies; 14+ messages in thread From: Andre Przywara @ 2026-06-08 7:38 UTC (permalink / raw) To: Lukas Schmid, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Maxime Ripard Cc: devicetree, linux-arm-kernel, linux-sunxi, linux-kernel, linux-riscv Hi, On 6/6/26 22:54, Lukas Schmid wrote: > Added the "uart4_pb_pins" pinctrl used by the OpenNMC Checked against the datasheet: Reviewed-by: Andre Przywara <andre.przywara@arm.com> Cheers, Andre > > Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> > --- > arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > index 82cc85acccb1..00fddedfa36f 100644 > --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi > @@ -191,6 +191,12 @@ uart3_pb_pins: uart3-pb-pins { > pins = "PB6", "PB7"; > function = "uart3"; > }; > + > + /omit-if-no-ref/ > + uart4_pb_pins: uart4-pb-pins { > + pins = "PB2", "PB3"; > + function = "uart4"; > + }; > }; > > ccu: clock-controller@2001000 { _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v4 3/3] ARM: dts: sunxi: add support for NetCube Systems OpenNMC (dobermann) 2026-06-06 20:54 ` Lukas Schmid @ 2026-06-06 20:54 ` Lukas Schmid -1 siblings, 0 replies; 14+ messages in thread From: Lukas Schmid @ 2026-06-06 20:54 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Maxime Ripard Cc: Lukas Schmid, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel, linux-riscv NetCube Systems OpenNMC is an open replacement for APC SmartSlot Management Cards. It is based on the Nagami System-on-Module. It breaks out the following interfaces: - 10/100 Mbps Ethernet - USB Type-C OTG using a TUSB320 (usb0) - USB Type-C Console Port using a CH340 (uart3) - USB Type-A Host with internal CH334 USB-Hub (usb1) - MicroSD Slot with Card-Detect (mmc0) - WiFi/Bluetooth using the modules built-in ESP32 - SmartSlot serial interface (uart4) - DS3232 RTC with CR1220 Battery Backup - Extension connector providing SPI,I2C,USB,CAN,UART for future use. Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> --- arch/arm/boot/dts/allwinner/Makefile | 2 + .../sun8i-t113s-netcube-dobermann.dts | 149 ++++++++++++++++++ 2 files changed, 151 insertions(+) create mode 100644 arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile index f71392a55df8..0fc954d41595 100644 --- a/arch/arm/boot/dts/allwinner/Makefile +++ b/arch/arm/boot/dts/allwinner/Makefile @@ -201,6 +201,7 @@ DTC_FLAGS_sun8i-h3-orangepi-pc := -@ DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@ DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@ DTC_FLAGS_sun8i-t113s-netcube-nagami-basic-carrier := -@ +DTC_FLAGS_sun8i-t113s-netcube-dobermann := -@ DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-evb.dtb \ @@ -261,6 +262,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-s3-lichee-zero-plus.dtb \ sun8i-s3-pinecube.dtb \ sun8i-t113s-mangopi-mq-r-t113.dtb \ + sun8i-t113s-netcube-dobermann.dtb \ sun8i-t113s-netcube-nagami-basic-carrier.dtb \ sun8i-t113s-netcube-nagami-keypad-carrier.dtb \ sun8i-t3-cqa3t-bv3.dtb \ diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts new file mode 100644 index 000000000000..d7765caffe2a --- /dev/null +++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2026 Lukas Schmid <lukas.schmid@netcube.li> + */ + +/dts-v1/; +#include "sun8i-t113s-netcube-nagami.dtsi" + +#include <dt-bindings/leds/common.h> + +/ { + model = "NetCube Systems OpenNMC (dobermann)"; + compatible = "netcube,dobermann", "netcube,nagami", + "allwinner,sun8i-t113s"; + + aliases { + serial2 = &uart4; // UART on SmartSlot + rtc0 = &ds3232; + rtc1 = &rtc; // not battery backed + }; + + leds { + compatible = "gpio-leds"; + + led_heartbeat_green: led-heartbeat-green { + gpios = <&pio 6 14 GPIO_ACTIVE_HIGH>; /* PG14 */ + linux,default-trigger = "heartbeat"; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + tusb320: typec@60 { + compatible = "ti,tusb320"; + reg = <0x60>; + interrupts-extended = <&pio 3 22 IRQ_TYPE_LEVEL_LOW>; /* PD22 */ + }; + + ds3232: rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; +}; + +/* microSD Card Slot on the board */ +&mmc0 { + vmmc-supply = <®_vcc3v3>; + disable-wp; + bus-width = <4>; + cd-gpios = <&pio 6 15 GPIO_ACTIVE_LOW>; /* PG15 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + gpio-line-names = "", "", "", "", // PA + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "SMART_TX", "SMART_RX", // PB + "EXT_IO3", "EXT_IO2", "CONSOLE_TX", "CONSOLE_RX", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "eMMC_CLK", "eMMC_CMD", // PC + "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", // PD + "", "", "", "", + "", "USB_SEC_EN", "EXT_SPI_nCS", "EXT_SPI_SCK", + "EXT_SPI_MOSI", "EXT_SPI_MISO", "EXT_IO5", "EXT_IO4", + "SMART_SEL", "", "", "", + "I2C2_SCL", "I2C2_SDA", "TUSB320_nINT", "", + "", "", "", "", + "", "", "", "", + "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE + "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "", + "ETH_MDC", "ETH_MDIO", "I2C3_nINT", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "uSD_D1", "uSD_D0", "uSD_CLK", "uSD_CMD", // PF + "uSD_D3", "uSD_D2", "TUSB320_ID", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG + "ESP_D2", "ESP_D3", "ESP_TXD", "ESP_RXD", + "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA", + "EXT_IO1", "EXT_IO0", "LED_HEARTBEAT", "SD_DETECT", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +/* SmartSlot serial */ +&uart4 { + pinctrl-0 = <&uart4_pb_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + extcon = <&tusb320 0>; + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + status = "okay"; +}; -- 2.47.3 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v4 3/3] ARM: dts: sunxi: add support for NetCube Systems OpenNMC (dobermann) @ 2026-06-06 20:54 ` Lukas Schmid 0 siblings, 0 replies; 14+ messages in thread From: Lukas Schmid @ 2026-06-06 20:54 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Maxime Ripard Cc: Lukas Schmid, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel, linux-riscv NetCube Systems OpenNMC is an open replacement for APC SmartSlot Management Cards. It is based on the Nagami System-on-Module. It breaks out the following interfaces: - 10/100 Mbps Ethernet - USB Type-C OTG using a TUSB320 (usb0) - USB Type-C Console Port using a CH340 (uart3) - USB Type-A Host with internal CH334 USB-Hub (usb1) - MicroSD Slot with Card-Detect (mmc0) - WiFi/Bluetooth using the modules built-in ESP32 - SmartSlot serial interface (uart4) - DS3232 RTC with CR1220 Battery Backup - Extension connector providing SPI,I2C,USB,CAN,UART for future use. Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> --- arch/arm/boot/dts/allwinner/Makefile | 2 + .../sun8i-t113s-netcube-dobermann.dts | 149 ++++++++++++++++++ 2 files changed, 151 insertions(+) create mode 100644 arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile index f71392a55df8..0fc954d41595 100644 --- a/arch/arm/boot/dts/allwinner/Makefile +++ b/arch/arm/boot/dts/allwinner/Makefile @@ -201,6 +201,7 @@ DTC_FLAGS_sun8i-h3-orangepi-pc := -@ DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@ DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@ DTC_FLAGS_sun8i-t113s-netcube-nagami-basic-carrier := -@ +DTC_FLAGS_sun8i-t113s-netcube-dobermann := -@ DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-evb.dtb \ @@ -261,6 +262,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-s3-lichee-zero-plus.dtb \ sun8i-s3-pinecube.dtb \ sun8i-t113s-mangopi-mq-r-t113.dtb \ + sun8i-t113s-netcube-dobermann.dtb \ sun8i-t113s-netcube-nagami-basic-carrier.dtb \ sun8i-t113s-netcube-nagami-keypad-carrier.dtb \ sun8i-t3-cqa3t-bv3.dtb \ diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts new file mode 100644 index 000000000000..d7765caffe2a --- /dev/null +++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2026 Lukas Schmid <lukas.schmid@netcube.li> + */ + +/dts-v1/; +#include "sun8i-t113s-netcube-nagami.dtsi" + +#include <dt-bindings/leds/common.h> + +/ { + model = "NetCube Systems OpenNMC (dobermann)"; + compatible = "netcube,dobermann", "netcube,nagami", + "allwinner,sun8i-t113s"; + + aliases { + serial2 = &uart4; // UART on SmartSlot + rtc0 = &ds3232; + rtc1 = &rtc; // not battery backed + }; + + leds { + compatible = "gpio-leds"; + + led_heartbeat_green: led-heartbeat-green { + gpios = <&pio 6 14 GPIO_ACTIVE_HIGH>; /* PG14 */ + linux,default-trigger = "heartbeat"; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + tusb320: typec@60 { + compatible = "ti,tusb320"; + reg = <0x60>; + interrupts-extended = <&pio 3 22 IRQ_TYPE_LEVEL_LOW>; /* PD22 */ + }; + + ds3232: rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; +}; + +/* microSD Card Slot on the board */ +&mmc0 { + vmmc-supply = <®_vcc3v3>; + disable-wp; + bus-width = <4>; + cd-gpios = <&pio 6 15 GPIO_ACTIVE_LOW>; /* PG15 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + gpio-line-names = "", "", "", "", // PA + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "SMART_TX", "SMART_RX", // PB + "EXT_IO3", "EXT_IO2", "CONSOLE_TX", "CONSOLE_RX", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "eMMC_CLK", "eMMC_CMD", // PC + "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", // PD + "", "", "", "", + "", "USB_SEC_EN", "EXT_SPI_nCS", "EXT_SPI_SCK", + "EXT_SPI_MOSI", "EXT_SPI_MISO", "EXT_IO5", "EXT_IO4", + "SMART_SEL", "", "", "", + "I2C2_SCL", "I2C2_SDA", "TUSB320_nINT", "", + "", "", "", "", + "", "", "", "", + "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE + "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "", + "ETH_MDC", "ETH_MDIO", "I2C3_nINT", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "uSD_D1", "uSD_D0", "uSD_CLK", "uSD_CMD", // PF + "uSD_D3", "uSD_D2", "TUSB320_ID", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG + "ESP_D2", "ESP_D3", "ESP_TXD", "ESP_RXD", + "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA", + "EXT_IO1", "EXT_IO0", "LED_HEARTBEAT", "SD_DETECT", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +/* SmartSlot serial */ +&uart4 { + pinctrl-0 = <&uart4_pb_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + extcon = <&tusb320 0>; + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + status = "okay"; +}; -- 2.47.3 _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v4 3/3] ARM: dts: sunxi: add support for NetCube Systems OpenNMC (dobermann) 2026-06-06 20:54 ` Lukas Schmid @ 2026-06-13 11:04 ` Jernej Škrabec -1 siblings, 0 replies; 14+ messages in thread From: Jernej Škrabec @ 2026-06-13 11:04 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai, Samuel Holland, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Maxime Ripard, Lukas Schmid Cc: Lukas Schmid, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel, linux-riscv Dne sobota, 6. junij 2026 ob 22:54:43 Srednjeevropski poletni čas je Lukas Schmid napisal(a): > NetCube Systems OpenNMC is an open replacement for APC SmartSlot Management > Cards. It is based on the Nagami System-on-Module. It breaks out the > following interfaces: > > - 10/100 Mbps Ethernet > - USB Type-C OTG using a TUSB320 (usb0) > - USB Type-C Console Port using a CH340 (uart3) > - USB Type-A Host with internal CH334 USB-Hub (usb1) > - MicroSD Slot with Card-Detect (mmc0) > - WiFi/Bluetooth using the modules built-in ESP32 > - SmartSlot serial interface (uart4) > - DS3232 RTC with CR1220 Battery Backup > - Extension connector providing SPI,I2C,USB,CAN,UART for future use. > > Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> DT Check passes, so: Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Best regards, Jernej ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4 3/3] ARM: dts: sunxi: add support for NetCube Systems OpenNMC (dobermann) @ 2026-06-13 11:04 ` Jernej Škrabec 0 siblings, 0 replies; 14+ messages in thread From: Jernej Škrabec @ 2026-06-13 11:04 UTC (permalink / raw) To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Chen-Yu Tsai, Samuel Holland, Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexandre Ghiti, Maxime Ripard, Lukas Schmid Cc: Lukas Schmid, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel, linux-riscv Dne sobota, 6. junij 2026 ob 22:54:43 Srednjeevropski poletni čas je Lukas Schmid napisal(a): > NetCube Systems OpenNMC is an open replacement for APC SmartSlot Management > Cards. It is based on the Nagami System-on-Module. It breaks out the > following interfaces: > > - 10/100 Mbps Ethernet > - USB Type-C OTG using a TUSB320 (usb0) > - USB Type-C Console Port using a CH340 (uart3) > - USB Type-A Host with internal CH334 USB-Hub (usb1) > - MicroSD Slot with Card-Detect (mmc0) > - WiFi/Bluetooth using the modules built-in ESP32 > - SmartSlot serial interface (uart4) > - DS3232 RTC with CR1220 Battery Backup > - Extension connector providing SPI,I2C,USB,CAN,UART for future use. > > Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li> DT Check passes, so: Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Best regards, Jernej _______________________________________________ linux-riscv mailing list linux-riscv@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-riscv ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2026-06-13 11:05 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2026-06-06 20:54 [PATCH v4 0/3] Add support for NetCube Systems OpenNMC (dobermann) Lukas Schmid 2026-06-06 20:54 ` Lukas Schmid 2026-06-06 20:54 ` [PATCH v4 1/3] dt-bindings: arm: sunxi: Add " Lukas Schmid 2026-06-06 20:54 ` Lukas Schmid 2026-06-07 8:25 ` Krzysztof Kozlowski 2026-06-07 8:25 ` Krzysztof Kozlowski 2026-06-06 20:54 ` [PATCH v4 2/3] riscv: dts: allwinner: d1s-t113: Add uart4 pinctrl required by NetCube Systems OpenNMC Lukas Schmid 2026-06-06 20:54 ` Lukas Schmid 2026-06-08 7:38 ` Andre Przywara 2026-06-08 7:38 ` Andre Przywara 2026-06-06 20:54 ` [PATCH v4 3/3] ARM: dts: sunxi: add support for NetCube Systems OpenNMC (dobermann) Lukas Schmid 2026-06-06 20:54 ` Lukas Schmid 2026-06-13 11:04 ` Jernej Škrabec 2026-06-13 11:04 ` Jernej Škrabec
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.