From: sashiko-bot@kernel.org
To: "Navid Ghahremani" <ghahramani.navid@gmail.com>
Cc: robh@kernel.org, conor+dt@kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 22/24] usb: dwc3: generic-plat: Add ZTE ZX279128S
Date: Sat, 10 Oct 2026 13:14:23 +0000 [thread overview]
Message-ID: <sashiko-outbox-166578@kernel.org> (raw)
In-Reply-To: <20261010130024.177503-23-ghahramani.navid@gmail.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] usb: dwc3: generic driver unconditionally disables suspend clock, breaking wakeup
--
commit 6d824e4ed683e8447bfbbcb4a2e9d9fcfd05236b
Author: Navid Ghahremani <ghahramani.navid@gmail.com>
usb: dwc3: generic-plat: Add ZTE ZX279128S
Adds ZTE ZX279128S platform support to the generic DWC3 platform
driver to handle clocks and resets.
[ ... ]
> diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c
> index ca69ac0eb07ce..aa838cf0676f2 100644
> --- a/drivers/usb/dwc3/dwc3-generic-plat.c
> +++ b/drivers/usb/dwc3/dwc3-generic-plat.c
> @@ -237,6 +237,7 @@ static const struct of_device_id dwc3_generic_of_match[] = {
> { .compatible = "fsl,ls1028a-dwc3", &fsl_ls1028_dwc3},
> { .compatible = "eswin,eic7700-dwc3", &eic7700_dwc3},
> { .compatible = "starfive,jhb100-dwc3", },
> + { .compatible = "zte,zx279128s-dwc3", },
[Severity: Medium]
Will using the generic DWC3 platform driver break USB suspend and wakeup
functionality for this new ZTE platform?
The ZTE device tree defines a suspend clock alongside the regular clocks,
which get acquired in the bulk request during probe.
The generic platform driver sets probe_data.ignore_clocks_and_resets = true
in dwc3_generic_probe():
drivers/usb/dwc3/dwc3-generic-plat.c:dwc3_generic_probe() {
...
probe_data.ignore_clocks_and_resets = true;
...
}
This bypasses the DWC3 core's own clock management and suspend clock scaling.
Then, when the system suspends, dwc3_generic_suspend() unconditionally
disables all acquired clocks:
drivers/usb/dwc3/dwc3-generic-plat.c:dwc3_generic_suspend() {
...
clk_bulk_disable_unprepare(dwc3g->num_clocks, dwc3g->clks);
...
}
Since the suspend clock is disabled here, won't this power off the suspend
clock during system sleep and prevent wakeup?
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, dwc3_generic_of_match);
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261010130024.177503-1-ghahramani.navid@gmail.com?part=22
next prev parent reply other threads:[~2026-10-10 13:14 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-10 12:59 [PATCH RFC 00/24] ARM: zte: Add support for Sanechips ZX279128S and ZTE ZXHN H3600 Navid Ghahremani
2026-10-10 12:59 ` [PATCH 01/24] dt-bindings: cache: l2c2x0: Describe ZTE device-read serialization Navid Ghahremani
2026-10-12 9:43 ` Krzysztof Kozlowski
2026-10-10 12:59 ` [PATCH 02/24] ARM: l2c: Serialize device reads with cache maintenance when requested Navid Ghahremani
2026-10-10 13:10 ` sashiko-bot
2026-10-10 14:28 ` Arnd Bergmann
2026-10-10 21:41 ` Navid Ghahremani
2026-10-11 1:02 ` Navid Ghahremani
2026-10-11 14:48 ` Arnd Bergmann
2026-10-10 12:59 ` [PATCH 03/24] wifi: mt76: Serialize MMIO reads with outer cache maintenance Navid Ghahremani
2026-10-10 12:59 ` [PATCH 04/24] dt-bindings: arm: Add ZTE ZX279128S platform descriptions Navid Ghahremani
2026-10-10 12:59 ` [PATCH 05/24] ARM: zte: Add ZX279128S platform and CPU hotplug support Navid Ghahremani
2026-10-10 14:13 ` Arnd Bergmann
2026-10-10 17:34 ` Stefan Dösinger
2026-10-10 21:26 ` Navid Ghahremani
2026-10-10 12:59 ` [PATCH 06/24] dt-bindings: clock: Add ZTE ZX279128S CRM clocks and resets Navid Ghahremani
2026-10-10 13:08 ` sashiko-bot
2026-10-11 9:13 ` Stefan Dösinger
2026-10-10 12:59 ` [PATCH 07/24] clk: zte: Add ZX279128S CRM clock and reset driver Navid Ghahremani
2026-10-10 13:15 ` sashiko-bot
2026-10-11 11:10 ` Stefan Dösinger
2026-10-10 12:59 ` [PATCH 08/24] dt-bindings: gpio: Add ZTE ZX279128S GPIO controller Navid Ghahremani
2026-10-10 12:59 ` [PATCH 09/24] gpio: Add ZTE ZX279128S GPIO driver Navid Ghahremani
2026-10-10 13:14 ` sashiko-bot
2026-10-11 11:19 ` Stefan Dösinger
2026-10-12 10:59 ` Uwe Kleine-König
2026-10-10 12:59 ` [PATCH 10/24] dt-bindings: pinctrl: pinctrl-single: Add ZTE ZX279128S pin mux Navid Ghahremani
2026-10-10 12:59 ` [PATCH 11/24] dt-bindings: mfd: syscon: Add ZX279128S system controller Navid Ghahremani
2026-10-10 13:08 ` sashiko-bot
2026-10-10 12:59 ` [PATCH 12/24] dt-bindings: PCI: Add ZTE ZX279128S host controller Navid Ghahremani
2026-10-10 13:12 ` sashiko-bot
2026-10-10 12:59 ` [PATCH 13/24] PCI: dwc: Add ZTE ZX279128S host controller driver Navid Ghahremani
2026-10-10 13:14 ` sashiko-bot
2026-10-11 13:03 ` Stefan Dösinger
2026-10-10 12:59 ` [PATCH 14/24] dt-bindings: net: Add ZTE ZX279128S MDIO controller Navid Ghahremani
2026-10-10 13:06 ` sashiko-bot
2026-10-10 12:59 ` [PATCH 15/24] net: mdio: " Navid Ghahremani
2026-10-10 13:11 ` sashiko-bot
2026-10-10 12:59 ` [PATCH 16/24] net: phy: Add Sanechips ZX5201 PHY support Navid Ghahremani
2026-10-10 12:59 ` [PATCH 17/24] dt-bindings: net: Add ZTE ZX279128S Ethernet switch Navid Ghahremani
2026-10-10 13:08 ` sashiko-bot
2026-10-10 12:59 ` [PATCH 18/24] net: ethernet: zte: Add ZX279128S Ethernet switch driver Navid Ghahremani
2026-10-10 13:19 ` sashiko-bot
2026-10-10 12:59 ` [PATCH 19/24] dt-bindings: spi: Add ZTE ZX279128S SPI flash controller Navid Ghahremani
2026-10-10 12:59 ` [PATCH 20/24] " Navid Ghahremani
2026-10-10 13:11 ` sashiko-bot
2026-10-11 16:32 ` Stefan Dösinger
2026-10-10 12:59 ` [PATCH 21/24] dt-bindings: usb: Add ZTE ZX279128S DWC3 controller Navid Ghahremani
2026-10-10 13:11 ` sashiko-bot
2026-10-10 13:00 ` [PATCH 22/24] usb: dwc3: generic-plat: Add ZTE ZX279128S Navid Ghahremani
2026-10-10 13:14 ` sashiko-bot [this message]
2026-10-10 13:00 ` [PATCH 23/24] ARM: dts: zte: Add ZX279128S SoC description Navid Ghahremani
2026-10-10 13:14 ` sashiko-bot
2026-10-10 13:00 ` [PATCH 24/24] ARM: dts: zte: Add ZTE ZXHN H3600 board Navid Ghahremani
2026-10-12 19:20 ` [PATCH RFC 00/24] ARM: zte: Add support for Sanechips ZX279128S and ZTE ZXHN H3600 Stefan Dösinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-166578@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=ghahramani.navid@gmail.com \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.