All of lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Fil Dunsky" <filipp.dunsky@gmail.com>
Cc: linux-serial@vger.kernel.org
Subject: Re: [PATCH v6 04/10] ARM: goldengate: Add support for the CS75xx SoC family
Date: Tue, 13 Oct 2026 06:25:14 +0000	[thread overview]
Message-ID: <sashiko-outbox-169081@kernel.org> (raw)
In-Reply-To: <20261013-b4-cs75xx-v6-4-37e8f3969b7c@gmail.com>

> From: Fil Dunsky <filipp.dunsky@gmail.com>
> 
> The Cortina Systems CS75xx ("Goldengate G2") are network processors
> with two Cortex-A9 cores, an SCU, GIC, the Cortex-A9 global and private
> timers and a PL310 L2 cache controller. The family includes at least
> the CS7522 and the CS7542; the CS7542 is used, among others, in the
> Securifi Almond+ router.
> 
> Apart from the vendor this has little in common with the Cortina
> Systems Gemini (SL3516/CS3516) supported by mach-gemini: Gemini is a
> single ARMv4 FA526 with Faraday peripherals (FTINTC010, FTTMR010,
> FTGPIO010, a 16550 UART) built for ARCH_MULTI_V4, while the CS75xx is
> an ARMv7 MPCore whose UART, GPIO, interrupt controller and NAND
> controller are different blocks. It therefore gets its own directory,
> named after the Goldengate codename like in the vendor kernel. The
> [ ... ]
> is r3p1-50rel0 (CACHE_ID 0x410000c7), select the workaround for its
> erratum 769419 as well.
> 
> Reviewed-by: Linus Walleij <linusw@kernel.org>
> Signed-off-by: Fil Dunsky <filipp.dunsky@gmail.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261013-b4-cs75xx-v6-0-37e8f3969b7c@gmail.com?part=4


  reply	other threads:[~2026-10-13  6:25 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-13  6:06 [PATCH v6 00/10] ARM: Add support for Cortina Systems CS75xx and Securifi Almond+ Fil Dunsky via B4 Relay
2026-10-13  6:06 ` Fil Dunsky
2026-10-13  6:06 ` [PATCH v6 01/10] dt-bindings: vendor-prefixes: Add Securifi Fil Dunsky via B4 Relay
2026-10-13  6:06   ` Fil Dunsky
2026-10-13  6:09   ` sashiko-bot
2026-10-13  6:06 ` [PATCH v6 02/10] dt-bindings: arm: Add Cortina Systems CS7542 and Securifi Almond+ Fil Dunsky via B4 Relay
2026-10-13  6:06   ` Fil Dunsky
2026-10-13  6:11   ` sashiko-bot
2026-10-13  6:06 ` [PATCH v6 03/10] dt-bindings: arm: cpus: Add Cortina Systems CS7542 enable method Fil Dunsky via B4 Relay
2026-10-13  6:06   ` Fil Dunsky
2026-10-13  6:14   ` sashiko-bot
2026-10-13  6:06 ` [PATCH v6 04/10] ARM: goldengate: Add support for the CS75xx SoC family Fil Dunsky via B4 Relay
2026-10-13  6:06   ` Fil Dunsky
2026-10-13  6:25   ` sashiko-bot [this message]
2026-10-13  6:06 ` [PATCH v6 05/10] ARM: debug: Add Cortina Systems CS75xx UART0 support Fil Dunsky via B4 Relay
2026-10-13  6:06   ` Fil Dunsky
2026-10-13  6:29   ` sashiko-bot
2026-10-13  6:06 ` [PATCH v6 06/10] dt-bindings: serial: Add Cortina Systems CS7542 UART Fil Dunsky via B4 Relay
2026-10-13  6:06   ` Fil Dunsky
2026-10-13  6:32   ` sashiko-bot
2026-10-13  6:06 ` [PATCH v6 07/10] tty: serial: Add Cortina UART driver Fil Dunsky via B4 Relay
2026-10-13  6:06   ` Fil Dunsky
2026-10-13  6:41   ` sashiko-bot
2026-10-13  6:06 ` [PATCH v6 08/10] ARM: dts: cortina: Add CS7542 SoC and Securifi Almond+ board Fil Dunsky via B4 Relay
2026-10-13  6:06   ` Fil Dunsky
2026-10-13  6:46   ` sashiko-bot
2026-10-13  6:06 ` [PATCH v6 09/10] ARM: multi_v7_defconfig: Enable Cortina Systems CS75xx support Fil Dunsky via B4 Relay
2026-10-13  6:06   ` Fil Dunsky
2026-10-13  6:47   ` sashiko-bot
2026-10-13  6:06 ` [PATCH v6 10/10] MAINTAINERS: Add entry for Cortina Systems CS75xx Fil Dunsky via B4 Relay
2026-10-13  6:06   ` Fil Dunsky
2026-10-13  6:18 ` [PATCH v6 00/10] ARM: Add support for Cortina Systems CS75xx and Securifi Almond+ Krzysztof Kozlowski
2026-10-13  6:37   ` Fil Dunsky
2026-10-13  9:04     ` Arnd Bergmann
2026-10-13  9:07       ` Fil Dunsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-169081@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=filipp.dunsky@gmail.com \
    --cc=linux-serial@vger.kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.