From: sashiko-bot@kernel.org
To: "Claudiu Beznea" <claudiu.beznea@kernel.org>
Cc: linux-pci@vger.kernel.org
Subject: Re: [PATCH v7 01/14] PCI: rzg3s-host: Follow hardware manual clock/reset initialization order
Date: Mon, 19 Oct 2026 06:57:37 +0000 [thread overview]
Message-ID: <sashiko-outbox-176724@kernel.org> (raw)
In-Reply-To: <20261019065025.2146539-2-claudiu.beznea@kernel.org>
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> The RZ/G3S PCIe hardware manual specifies that the clocks must be enabled
> before the reset signals are deasserted during initialization.
>
> Follow this sequence in the probe(), suspend(), and resume() paths to
> match the hardware requirements and avoid potential issues.
>
> Fixes: 7ef502fb35b2 ("PCI: Add Renesas RZ/G3S host controller driver")
> Cc: stable@vger.kernel.org
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Sashiko has reviewed this patch and found no issues.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261019065025.2146539-1-claudiu.beznea@kernel.org?part=1
next prev parent reply other threads:[~2026-10-19 6:57 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-19 6:50 [PATCH v7 00/14] PCI: rzg3s-host: Add PCIe hotplug support Claudiu Beznea
2026-10-19 6:50 ` [PATCH v7 01/14] PCI: rzg3s-host: Follow hardware manual clock/reset initialization order Claudiu Beznea
2026-10-19 6:57 ` sashiko-bot [this message]
2026-10-19 6:50 ` [PATCH v7 02/14] PCI: rzg3s-host: Fix runtime PM handling in the NOIRQ suspend/resume phase Claudiu Beznea
2026-10-19 6:57 ` sashiko-bot
2026-10-19 6:50 ` [PATCH v7 03/14] PCI: rzg3s-host: Don't mix goto-based unwinding and cleanup helpers Claudiu Beznea
2026-10-19 6:54 ` sashiko-bot
2026-10-19 6:50 ` [PATCH v7 04/14] PCI: rzg3s-host: Create the INTx IRQ domain before setting the chained handlers Claudiu Beznea
2026-10-19 6:56 ` sashiko-bot
2026-10-19 6:50 ` [PATCH v7 05/14] PCI: rzg3s-host: Initialize the IRQ domains after the IRQs are masked Claudiu Beznea
2026-10-19 7:03 ` sashiko-bot
2026-10-19 6:50 ` [PATCH v7 06/14] PCI: rzg3s-host: Drop read-modify-write approach for the R/W1C registers Claudiu Beznea
2026-10-19 6:54 ` sashiko-bot
2026-10-19 6:50 ` [PATCH v7 07/14] PCI: rzg3s-host: Use cached MSI address in .irq_compose_msi_msg() Claudiu Beznea
2026-10-19 6:54 ` sashiko-bot
2026-10-20 8:45 ` Lad, Prabhakar
2026-10-20 9:10 ` Claudiu Beznea
2026-10-19 6:50 ` [PATCH v7 08/14] PCI: rzg3s-host: Drop nop instructions Claudiu Beznea
2026-10-19 6:55 ` sashiko-bot
2026-10-19 6:50 ` [PATCH v7 09/14] PCI: rzg3s-host: Move host configuration code together Claudiu Beznea
2026-10-19 6:55 ` sashiko-bot
2026-10-19 6:50 ` [PATCH v7 10/14] PCI: rzg3s-host: Move suspend/resume code into dedicated functions Claudiu Beznea
2026-10-19 6:57 ` sashiko-bot
2026-10-19 6:50 ` [PATCH v7 11/14] PCI: rzg3s-host: Move IRQ domain setup code Claudiu Beznea
2026-10-19 6:55 ` sashiko-bot
2026-10-19 6:50 ` [PATCH v7 12/14] PCI: rzg3s-host: Add helper to wait for link up Claudiu Beznea
2026-10-19 6:55 ` sashiko-bot
2026-10-19 6:50 ` [PATCH v7 13/14] PCI: rzg3s-host: Re-enumerate the bus on PCIe link-state changes Claudiu Beznea
2026-10-19 7:30 ` sashiko-bot
2026-10-19 6:50 ` [PATCH v7 14/14] PCI: rzg3s-host: Add bridge::reset_root_port() Claudiu Beznea
2026-10-19 7:25 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-176724@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=claudiu.beznea@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.