[PATCH] PCI: Disable ACPI wakeup on MSI MS-1592 and MS-1594 dGPU root port

[PATCH] PCI: Disable ACPI wakeup on MSI MS-1592 and MS-1594 dGPU root port

[Victor Carreras]

On MSI Summit E16 Flip A12UCT (motherboard MS-1592, BIOS E1592IMS.111)
and MSI Prestige 16 Studio A13VE / Summit E16 Flip A13VET (motherboard
MS-1594, BIOS E1594IMS.115), the I2C touchpad (ELAN0305:00, 04F3:31FD)
permanently stops generating interrupts as soon as the discrete NVIDIA
GPU (0000:01:00.0) and its parent PCIe Root Port (0000:00:06.0,
\_SB.PC00.PEG0) enter D3cold.

In the platform's SSDT (MSI_NB / AdlP_Rvp), \_SB.PC00.PEG0 sets its wake
GPIO (WAKG) from the BIOS NVS variable P1WP, which erroneously points to
GPP_A20 (INTC1055:00 pin 62) -- the GPIO interrupt line wired to the
touchpad.

During boot, \_SB.PC00.PEG0.PON() calls \_SB.SHPO(WAKG, One), setting
PAD_CFG0_GPP_A20.GPIROUTSCI = 0 and HostSwOwn = 1 so the OS GPIO driver
owns the pin. However, when the root port runtime-suspends to D3cold,
Linux enables ACPI wakeup via \_SB.PC00.PEG0._DSW(1, 0, 3), which sets
WKEN = 1. Subsequent evaluation of \_SB.PC00.PEG0.PXP._OFF -> POFF()
executes:

  If (CondRefOf (WAKG))
  {
      If (((WAKG != Zero) && WKEN))
      {
          \_SB.SHPO (WAKG, Zero)
      }
  }

This switches GPP_A20 ownership to ACPI GPE mode (HostSwOwn = 0,
GPIROUTSCI = 1), silencing the touchpad interrupt until the dGPU wakes
back up to D0. Under Windows, _DSW is not armed for S0 D3cold on this
root port, leaving WKEN = 0 so POFF() powers off the dGPU (\PIN.OFF(PWRG))
without touching GPP_A20.

Add a PCI quirk for boards MS-1592 and MS-1594 on root port 0000:00:06.0
(8086:464d on 12th Gen Alder Lake-P and 8086:a74d on 13th Gen Raptor
Lake-P/H) to disable ACPI wakeup capability. This keeps WKEN = 0 so the
root port and dGPU still reach D3cold normally while leaving GPP_A20
owned by the GPIO driver.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220725
Cc: stable@vger.kernel.org
Signed-off-by: Victor Carreras <vicajilau@gmail.com>
---
 drivers/pci/quirks.c | 50 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 1aa87a3..4e26674 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3941,6 +3941,56 @@ static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL,
 			       PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C,
 			       quirk_apple_poweroff_thunderbolt);
+
+/*
+ * On MSI Summit E16 Flip A12UCT (board MS-1592) and MSI Prestige 16 Studio
+ * A13VE / Summit E16 Flip A13VET (board MS-1594), the BIOS SSDT (MSI_NB /
+ * AdlP_Rvp) assigns the touchpad's GPIO interrupt pin (GPP_A20) as the PCIe
+ * wake GPIO (WAKG / P1WP) for the dGPU root port (\_SB.PC00.PEG0, 0000:00:06.0).
+ *
+ * When ACPI wakeup is armed on this root port via _DSW (setting WKEN = 1),
+ * subsequent D3cold transitions (\_SB.PC00.PEG0.PXP._OFF -> POFF) call
+ * \_SB.SHPO(WAKG, Zero), switching GPP_A20 ownership from GPIO driver mode
+ * to ACPI GPE mode and permanently freezing the I2C touchpad (ELAN0305:00).
+ *
+ * Disable ACPI wakeup on this root port so _DSW is not armed and WKEN
+ * remains zero during D3cold transitions.
+ */
+static const struct dmi_system_id msi_peg0_no_wakeup_dmi_table[] = {
+	{
+		.ident = "MSI MS-1592",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Micro-Star International Co., Ltd."),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-1592"),
+		},
+	},
+	{
+		.ident = "MSI MS-1594",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Micro-Star International Co., Ltd."),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-1594"),
+		},
+	},
+	{ }
+};
+
+static void quirk_msi_peg0_no_wakeup(struct pci_dev *dev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&dev->dev);
+
+	if (!adev || pci_dev_id(dev) != PCI_DEVID(0, PCI_DEVFN(6, 0)))
+		return;
+
+	if (!dmi_check_system(msi_peg0_no_wakeup_dmi_table))
+		return;
+
+	pci_info(dev, FW_BUG "Disabling ACPI wakeup to avoid touchpad GPIO (GPP_A20) takeover in D3cold\n");
+	device_wakeup_disable(&dev->dev);
+	device_set_wakeup_capable(&dev->dev, false);
+	adev->wakeup.flags.valid = 0;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x464d, quirk_msi_peg0_no_wakeup);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0xa74d, quirk_msi_peg0_no_wakeup);
 #endif
 
 /*
-- 
2.55.0

Re: [PATCH] PCI: Disable ACPI wakeup on MSI MS-1592 and MS-1594 dGPU root port

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] PCI: unbalanced ACPI power dependent cleanup in quirk_msi_peg0_no_wakeup()
--

commit f7da2ed74b979227b2829513aae8ba6e3fc051b4
Author: Victor Carreras <vicajilau@gmail.com>

PCI: Disable ACPI wakeup on MSI MS-1592 and MS-1594 dGPU root port

This patch adds a PCI final fixup quirk for MSI MS-1592 and MS-1594 boards to
disable ACPI wakeup on the dGPU PCIe root port (0000:00:06.0), preventing
firmware from switching the touchpad's GPIO interrupt pin into ACPI GPE mode
during D3cold transitions.

> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 7572b358b50fc..385c9d6db19e0 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -3969,6 +3969,56 @@ static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev)
>  DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL,
>  			       PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C,
>  			       quirk_apple_poweroff_thunderbolt);
> +
[ ... ]
> +static void quirk_msi_peg0_no_wakeup(struct pci_dev *dev)
> +{
> +	struct acpi_device *adev = ACPI_COMPANION(&dev->dev);
> +
> +	if (!adev || pci_dev_id(dev) != PCI_DEVID(0, PCI_DEVFN(6, 0)))
> +		return;
> +
> +	if (!dmi_check_system(msi_peg0_no_wakeup_dmi_table))
> +		return;
> +
> +	pci_info(dev, FW_BUG "Disabling ACPI wakeup to avoid touchpad GPIO (GPP_A20) takeover in D3cold\n");
> +	device_wakeup_disable(&dev->dev);
> +	device_set_wakeup_capable(&dev->dev, false);
> +	adev->wakeup.flags.valid = 0;
> +}
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x464d, quirk_msi_peg0_no_wakeup);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0xa74d, quirk_msi_peg0_no_wakeup);

[Severity: High]
Does clearing adev->wakeup.flags.valid in a DECLARE_PCI_FIXUP_FINAL quirk
without removing the ACPI power resource dependent leave a dangling pointer
on resource->dependents if the PCI device is later removed?

During device enumeration, pci_device_add() -> device_add() ->
acpi_device_notify() -> pci_acpi_setup() runs before pci_fixup_final quirks
are applied:

drivers/pci/pci-acpi.c:pci_acpi_setup() {
	...
	if (!adev->wakeup.flags.valid)
		return;

	device_set_wakeup_capable(dev, true);
	if (pci_dev->bridge_d3)
		device_wakeup_enable(dev);

	acpi_pci_wakeup(pci_dev, false);
	acpi_device_power_add_dependent(adev, dev);
	...
}

Because adev->wakeup.flags.valid is still set when pci_acpi_setup() runs,
acpi_device_power_add_dependent() links a struct acpi_power_dependent_device
entry holding an unreferenced dep->dev = &dev->dev pointer onto the D0 power
resource's dependents list (here, \_SB.PC00.PEG0.PXP).

When quirk_msi_peg0_no_wakeup() subsequently clears adev->wakeup.flags.valid,
any later removal of the root port (for example via sysfs remove ->
pci_stop_and_remove_bus_device() -> pci_destroy_dev() -> device_del() ->
acpi_device_notify_remove() -> pci_acpi_cleanup()) will skip removing that
dependent entry:

drivers/pci/pci-acpi.c:pci_acpi_cleanup() {
	struct acpi_device *adev = ACPI_COMPANION(dev);
	struct pci_dev *pci_dev = to_pci_dev(dev);

	if (adev->wakeup.flags.valid) {
		acpi_device_power_remove_dependent(adev, dev);
		if (pci_dev->bridge_d3)
			device_wakeup_disable(dev);

		device_set_wakeup_capable(dev, false);
	}
}

Once struct pci_dev is freed, if the power resource is turned on again with
another dependent present (such as during a PCI bus rescan),
__acpi_power_on() iterates resource->dependents and passes the freed
dep->dev pointer to dev_dbg() and pm_request_resume().

In addition, clearing adev->wakeup.flags.valid causes
acpi_free_power_resources_lists() to skip freeing adev->wakeup.resources on
ACPI device teardown, and causes pci_acpi_setup() on a subsequent bus rescan
to return early before calling acpi_dev_power_up_children_with_adr(adev).

Since pci_acpi_setup() and pm_runtime_put() have already run by the time
final quirks execute, and runtime/system suspend paths check
device_can_wakeup(&dev->dev) (in pci_Full_Power_On / pci_target_state /
pci_finish_runtime_suspend / pci_prepare_to_sleep) before invoking
acpi_pci_wakeup(), is setting device_wakeup_disable(&dev->dev) and
device_set_wakeup_capable(&dev->dev, false) sufficient on its own without
clearing adev->wakeup.flags.valid, or should
acpi_device_power_remove_dependent(adev, &dev->dev) be called if
adev->wakeup.flags.valid is cleared?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/179272791966.20251.3697951431087014523@gmail.com?part=1

Re: [PATCH] PCI: Disable ACPI wakeup on MSI MS-1592 and MS-1594 dGPU root port

[Lukas Wunner]

On Fri, Oct 23, 2026 at 05:58:39AM +0200, Victor Carreras wrote:
> +++ b/drivers/pci/quirks.c
> @@ -3941,6 +3941,56 @@ static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev)
>  DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL,
>  			       PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C,
>  			       quirk_apple_poweroff_thunderbolt);
> +
> +/*
> + * On MSI Summit E16 Flip A12UCT (board MS-1592) and MSI Prestige 16 Studio
> + * A13VE / Summit E16 Flip A13VET (board MS-1594), the BIOS SSDT (MSI_NB /
> + * AdlP_Rvp) assigns the touchpad's GPIO interrupt pin (GPP_A20) as the PCIe
> + * wake GPIO (WAKG / P1WP) for the dGPU root port (\_SB.PC00.PEG0, 0000:00:06.0).
> + *
> + * When ACPI wakeup is armed on this root port via _DSW (setting WKEN = 1),
> + * subsequent D3cold transitions (\_SB.PC00.PEG0.PXP._OFF -> POFF) call
> + * \_SB.SHPO(WAKG, Zero), switching GPP_A20 ownership from GPIO driver mode
> + * to ACPI GPE mode and permanently freezing the I2C touchpad (ELAN0305:00).
> + *
> + * Disable ACPI wakeup on this root port so _DSW is not armed and WKEN
> + * remains zero during D3cold transitions.
> + */
> +static const struct dmi_system_id msi_peg0_no_wakeup_dmi_table[] = {
> +	{
> +		.ident = "MSI MS-1592",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "Micro-Star International Co., Ltd."),
> +			DMI_MATCH(DMI_BOARD_NAME, "MS-1592"),
> +		},
> +	},
> +	{
> +		.ident = "MSI MS-1594",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "Micro-Star International Co., Ltd."),
> +			DMI_MATCH(DMI_BOARD_NAME, "MS-1594"),
> +		},
> +	},
> +	{ }
> +};
> +
> +static void quirk_msi_peg0_no_wakeup(struct pci_dev *dev)
> +{
> +	struct acpi_device *adev = ACPI_COMPANION(&dev->dev);
> +
> +	if (!adev || pci_dev_id(dev) != PCI_DEVID(0, PCI_DEVFN(6, 0)))
> +		return;
> +
> +	if (!dmi_check_system(msi_peg0_no_wakeup_dmi_table))
> +		return;
> +
> +	pci_info(dev, FW_BUG "Disabling ACPI wakeup to avoid touchpad GPIO (GPP_A20) takeover in D3cold\n");
> +	device_wakeup_disable(&dev->dev);
> +	device_set_wakeup_capable(&dev->dev, false);
> +	adev->wakeup.flags.valid = 0;
> +}
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x464d, quirk_msi_peg0_no_wakeup);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0xa74d, quirk_msi_peg0_no_wakeup);

This is x86-specific but drivers/pci/quirks.c is used by all arches.
It should rather live e.g. in drivers/acpi/x86/utils.c.

Thanks,

Lukas

Re: [PATCH] PCI: Disable ACPI wakeup on MSI MS-1592 and MS-1594 dGPU root port

[Victor Carreras]

On Fri, Oct 23, 2026 at 10:11:22AM +0200, Lukas Wunner wrote:
> This is x86-specific but drivers/pci/quirks.c is used by all arches.
> It should rather live e.g. in drivers/acpi/x86/utils.c.

Thanks for the review, Lukas. I have moved the quirk to
drivers/acpi/x86/utils.c in v2 (and dropped clearing
adev->wakeup.flags.valid so pci_acpi_setup()/pci_acpi_cleanup() power
dependent tracking remains balanced).

Best regards,
Victor

[PATCH v2] ACPI: x86: Disable wakeup on MSI MS-1592 and MS-1594 dGPU root port

[Victor Carreras]

On MSI Summit E16 Flip A12UCT (motherboard MS-1592, BIOS E1592IMS.111)
and MSI Prestige 16 Studio A13VE / Summit E16 Flip A13VET (motherboard
MS-1594, BIOS E1594IMS.115), the I2C touchpad (ELAN0305:00, 04F3:31FD)
permanently stops generating interrupts as soon as the discrete NVIDIA
GPU (0000:01:00.0) and its parent PCIe Root Port (0000:00:06.0,
\_SB.PC00.PEG0) enter D3cold.

In the platform's SSDT (MSI_NB / AdlP_Rvp), \_SB.PC00.PEG0 sets its wake
GPIO (WAKG) from the BIOS NVS variable P1WP, which erroneously points to
GPP_A20 (INTC1055:00 pin 62) -- the GPIO interrupt line wired to the
touchpad.

During boot, \_SB.PC00.PEG0.PON() calls \_SB.SHPO(WAKG, One), setting
PAD_CFG0_GPP_A20.GPIROUTSCI = 0 and HostSwOwn = 1 so the OS GPIO driver
owns the pin. However, when the root port runtime-suspends to D3cold,
Linux enables ACPI wakeup via \_SB.PC00.PEG0._DSW(1, 0, 3), which sets
WKEN = 1. Subsequent evaluation of \_SB.PC00.PEG0.PXP._OFF -> POFF()
executes:

  If (CondRefOf (WAKG))
  {
      If (((WAKG != Zero) && WKEN))
      {
          \_SB.SHPO (WAKG, Zero)
      }
  }

This switches GPP_A20 ownership to ACPI GPE mode (HostSwOwn = 0,
GPIROUTSCI = 1), silencing the touchpad interrupt until the dGPU wakes
back up to D0. Under Windows, _DSW is not armed for S0 D3cold on this
root port, leaving WKEN = 0 so POFF() powers off the dGPU (\PIN.OFF(PWRG))
without touching GPP_A20.

Add a PCI quirk in drivers/acpi/x86/utils.c for boards MS-1592 and
MS-1594 on root port 0000:00:06.0 (8086:464d on 12th Gen Alder Lake-P
and 8086:a74d on 13th Gen Raptor Lake-P/H) to disable wakeup capability.
This keeps WKEN = 0 so the root port and dGPU still reach D3cold
normally while leaving GPP_A20 owned by the GPIO driver.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220725
Cc: stable@vger.kernel.org
Signed-off-by: Victor Carreras <vicajilau@gmail.com>
---
Changes in v2:
- Move the quirk from drivers/pci/quirks.c to drivers/acpi/x86/utils.c
  as it is x86-specific (Lukas Wunner).
- Drop clearing adev->wakeup.flags.valid in the final fixup so ACPI
  power resource dependent tracking between pci_acpi_setup() and
  pci_acpi_cleanup() remains balanced.
- Link to v1: https://lore.kernel.org/r/179272791966.20251.3697951431087014523@gmail.com

 drivers/acpi/x86/utils.c | 47 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index 4189516..84a6ca7 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -665,3 +665,50 @@ void __init acpi_proc_quirk_mwait_check(void)
 	 */
 	dmi_check_system(acpi_proc_quirk_mwait_dmi_table);
 }
+
+/*
+ * On MSI Summit E16 Flip A12UCT (board MS-1592) and MSI Prestige 16 Studio
+ * A13VE / Summit E16 Flip A13VET (board MS-1594), the BIOS SSDT (MSI_NB /
+ * AdlP_Rvp) assigns the touchpad's GPIO interrupt pin (GPP_A20) as the PCIe
+ * wake GPIO (WAKG / P1WP) for the dGPU root port (\_SB.PC00.PEG0, 0000:00:06.0).
+ *
+ * When ACPI wakeup is armed on this root port via _DSW (setting WKEN = 1),
+ * subsequent D3cold transitions (\_SB.PC00.PEG0.PXP._OFF -> POFF) call
+ * \_SB.SHPO(WAKG, Zero), switching GPP_A20 ownership from GPIO driver mode
+ * to ACPI GPE mode and permanently freezing the I2C touchpad (ELAN0305:00).
+ *
+ * Disable wakeup on this root port so _DSW is not armed and WKEN remains zero
+ * during D3cold transitions.
+ */
+static const struct dmi_system_id msi_peg0_no_wakeup_dmi_table[] = {
+	{
+		.ident = "MSI MS-1592",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Micro-Star International Co., Ltd."),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-1592"),
+		},
+	},
+	{
+		.ident = "MSI MS-1594",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Micro-Star International Co., Ltd."),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-1594"),
+		},
+	},
+	{}
+};
+
+static void quirk_msi_peg0_no_wakeup(struct pci_dev *dev)
+{
+	if (pci_dev_id(dev) != PCI_DEVID(0, PCI_DEVFN(6, 0)))
+		return;
+
+	if (!dmi_check_system(msi_peg0_no_wakeup_dmi_table))
+		return;
+
+	pci_info(dev, FW_BUG "Disabling ACPI wakeup to avoid touchpad GPIO (GPP_A20) takeover in D3cold\n");
+	device_wakeup_disable(&dev->dev);
+	device_set_wakeup_capable(&dev->dev, false);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x464d, quirk_msi_peg0_no_wakeup);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0xa74d, quirk_msi_peg0_no_wakeup);
-- 
2.55.0

Re: [PATCH v2] ACPI: x86: Disable wakeup on MSI MS-1592 and MS-1594 dGPU root port

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] ACPI: x86: quirk_msi_peg0_no_wakeup() fails to block _DSW() in D3cold
--

commit 234606e6357f6c832bc95f0db9d5907bb7aeaec6
Author: Victor Carreras <vicajilau@gmail.com>

ACPI: x86: Disable wakeup on MSI MS-1592 and MS-1594 dGPU root port

This patch adds a final PCI fixup quirk for MSI MS-1592 and MS-1594 boards on
root port 0000:00:06.0 to disable wakeup capability. This aims to prevent
\_SB.PC00.PEG0._DSW from arming wakeup during D3cold transitions so that BIOS
power-off methods do not switch the touchpad interrupt GPIO (GPP_A20) to ACPI
GPE mode.

Link: https://lore.kernel.org/r/179272791966.20251.3697951431087014523@gmail.com

> diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
> index 418951639f511..84a6ca7f10a8e 100644
> --- a/drivers/acpi/x86/utils.c
> +++ b/drivers/acpi/x86/utils.c
> @@ -665,3 +665,50 @@ void __init acpi_proc_quirk_mwait_check(void)

[ ... ]

> +static void quirk_msi_peg0_no_wakeup(struct pci_dev *dev)
> +{
> +	if (pci_dev_id(dev) != PCI_DEVID(0, PCI_DEVFN(6, 0)))
> +		return;
> +
> +	if (!dmi_check_system(msi_peg0_no_wakeup_dmi_table))
> +		return;
> +
> +	pci_info(dev, FW_BUG "Disabling ACPI wakeup to avoid touchpad GPIO (GPP_A20) takeover in D3cold\n");
> +	device_wakeup_disable(&dev->dev);
> +	device_set_wakeup_capable(&dev->dev, false);
> +}
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x464d, quirk_msi_peg0_no_wakeup);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0xa74d, quirk_msi_peg0_no_wakeup);

[Severity: High]
Will clearing should_wakeup and can_wakeup in a final fixup without clearing
adev->wakeup.flags.valid actually prevent \_SB.PC00.PEG0._DSW(1, 0, 3) from
being evaluated when the dGPU and root port runtime-suspend to D3cold?

There appear to be two runtime-suspend paths that still evaluate _DSW on
0000:00:06.0:

1. Direct root port runtime suspend:

quirk_msi_peg0_no_wakeup() runs during pci_fixup_device(pci_fixup_final, dev)
in drivers/pci/bus.c:pci_bus_add_device(), before device_initial_probe() and
before pcie_portdrv_init() runs at device_initcall time.

When pcie_portdriver later binds to root port 0000:00:06.0 and probes the PME
service, pcie_pme_probe() -> pcie_pme_mark_devices() -> pcie_pme_can_wakeup()
in drivers/pci/pcie/pme.c sets can_wakeup back to true:

static int pcie_pme_can_wakeup(struct pci_dev *dev, void *ign)
{
	device_set_wakeup_capable(&dev->dev, true);
	return 0;
}

When 0000:00:06.0 later runtime-suspends, drivers/pci/pci.c:
pci_pm_runtime_suspend() -> pci_finish_runtime_suspend() executes:

	__pci_enable_wake(dev, target_state, pci_dev_run_wake(dev));

Unlike pci_enable_wake() (which checks device_may_wakeup()),
pci_dev_run_wake() checks dev->pme_support and device_can_wakeup(&dev->dev)
while ignoring should_wakeup. __pci_enable_wake() then calls
platform_pci_set_wakeup(dev, true) -> acpi_pci_wakeup(dev, true) in
drivers/pci/pci-acpi.c:

int acpi_pci_wakeup(struct pci_dev *dev, bool enable)
{
	if (acpi_pci_disabled)
		return 0;

	if (acpi_pm_device_can_wakeup(&dev->dev))
		return acpi_pm_set_device_wakeup(&dev->dev, enable);

	return acpi_pci_propagate_wakeup(dev->bus, enable);
}

Because acpi_pm_device_can_wakeup() in drivers/acpi/device_pm.c only checks
adev->wakeup.flags.valid (which is no longer cleared in v2),
acpi_pm_set_device_wakeup() -> acpi_enable_wakeup_device_power() ->
acpi_device_sleep_wake(adev, 1, 0, 3) will still evaluate \_SB.PC00.PEG0._DSW.

2. Wakeup propagation from child devices on subordinate bus 0000:01:

Even if dev->dev.power.can_wakeup stayed false on 0000:00:06.0, child devices
on bus 0000:01 (such as the NVIDIA dGPU at 0000:01:00.0) have their own
pme_support and power.can_wakeup = true. When a child device runtime-suspends,
pci_finish_runtime_suspend() -> __pci_enable_wake() calls
acpi_pci_wakeup(child, true) -> acpi_pci_propagate_wakeup(child->bus, true) in
drivers/pci/pci-acpi.c:

static int acpi_pci_propagate_wakeup(struct pci_bus *bus, bool enable)
{
	while (bus->parent) {
		if (acpi_pm_device_can_wakeup(&bus->self->dev))
			return acpi_pm_set_device_wakeup(&bus->self->dev, enable);

		bus = bus->parent;
	}

acpi_pci_propagate_wakeup() walks up to bus->self (0000:00:06.0), checks only
acpi_pm_device_can_wakeup(&bus->self->dev) (adev->wakeup.flags.valid), and
calls acpi_pm_set_device_wakeup(&bus->self->dev, true), evaluating
\_SB.PC00.PEG0._DSW(1, 0, 3).

Would clearing adev->wakeup.flags.valid in a DECLARE_PCI_FIXUP_EARLY or
DECLARE_PCI_FIXUP_HEADER quirk (which runs after pci_set_acpi_fwnode() in
pci_setup_device(), but before pci_acpi_setup() in pci_device_add() ->
device_add()) avoid this issue while keeping pci_acpi_setup() and
pci_acpi_cleanup() balanced?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261024054711.21587-1-vicajilau@gmail.com?part=1