[PATCH 01/12] rtc: rv3029: use sysfs_emit() instead of sprintf()

[PATCH 01/12] rtc: rv3029: use sysfs_emit() instead of sprintf()

[alexandre.belloni]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use sysfs_emit() instead of sprintf() in sysfs show callbacks
(rv3029_hwmon_show_temp and rv3029_hwmon_show_update_interval) to
conform to the recommended sysfs attribute formatting guidelines in
Documentation/filesystems/sysfs.rst.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-rv3029c2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c
index c348b31928e9..33b73bbcaf52 100644
--- a/drivers/rtc/rtc-rv3029c2.c
+++ b/drivers/rtc/rtc-rv3029c2.c
@@ -601,7 +601,7 @@ static ssize_t rv3029_hwmon_show_temp(struct device *dev,
 	if (ret < 0)
 		return ret;
 
-	return sprintf(buf, "%d\n", temp_mC);
+	return sysfs_emit(buf, "%d\n", temp_mC);
 }
 
 static ssize_t rv3029_hwmon_set_update_interval(struct device *dev,
@@ -654,7 +654,7 @@ static ssize_t rv3029_hwmon_show_update_interval(struct device *dev,
 		interval_ms = 0;
 	}
 
-	return sprintf(buf, "%d\n", interval_ms);
+	return sysfs_emit(buf, "%d\n", interval_ms);
 }
 
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, rv3029_hwmon_show_temp,
-- 
2.56.0

[PATCH 02/12] rtc: pcf2127: use sysfs_emit() instead of sprintf()

[alexandre.belloni]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use sysfs_emit() instead of sprintf() in the sysfs show callback
(timestamp_show) to conform to the recommended sysfs attribute
formatting guidelines in Documentation/filesystems/sysfs.rst.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-pcf2127.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index ff2023908f5a..49542cc53411 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -972,7 +972,7 @@ static ssize_t timestamp_show(struct device *dev,
 		if (ret)
 			return ret;
 	}
-	return sprintf(buf, "%llu\n", (unsigned long long)ts);
+	return sysfs_emit(buf, "%llu\n", (unsigned long long)ts);
 }
 
 static ssize_t timestamp0_show(struct device *dev,
-- 
2.56.0

[PATCH 03/12] rtc: ep93xx: use sysfs_emit() instead of sprintf()

[alexandre.belloni]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use sysfs_emit() instead of sprintf() in sysfs show callbacks
(comp_preload_show and comp_delete_show) to conform to the
recommended sysfs attribute formatting guidelines in
Documentation/filesystems/sysfs.rst.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-ep93xx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index 507c9f22036c..f105aba28459 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -93,7 +93,7 @@ static ssize_t comp_preload_show(struct device *dev,
 
 	ep93xx_rtc_get_swcomp(dev->parent, &preload, NULL);
 
-	return sprintf(buf, "%d\n", preload);
+	return sysfs_emit(buf, "%d\n", preload);
 }
 static DEVICE_ATTR_RO(comp_preload);
 
@@ -104,7 +104,7 @@ static ssize_t comp_delete_show(struct device *dev,
 
 	ep93xx_rtc_get_swcomp(dev->parent, NULL, &delete);
 
-	return sprintf(buf, "%d\n", delete);
+	return sysfs_emit(buf, "%d\n", delete);
 }
 static DEVICE_ATTR_RO(comp_delete);
 
-- 
2.56.0

[PATCH 04/12] rtc: bq32k: use sysfs_emit() instead of sprintf()

[alexandre.belloni]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use sysfs_emit() instead of sprintf() in the sysfs show callback
(bq32k_sysfs_show_tricklecharge_bypass) to conform to the recommended
sysfs attribute formatting guidelines in
Documentation/filesystems/sysfs.rst.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-bq32k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-bq32k.c b/drivers/rtc/rtc-bq32k.c
index 573231613e52..0f50cfce88cb 100644
--- a/drivers/rtc/rtc-bq32k.c
+++ b/drivers/rtc/rtc-bq32k.c
@@ -210,7 +210,7 @@ static ssize_t bq32k_sysfs_show_tricklecharge_bypass(struct device *dev,
 	if (error)
 		return error;
 
-	return sprintf(buf, "%d\n", (reg & BQ32K_TCFE) ? 1 : 0);
+	return sysfs_emit(buf, "%d\n", (reg & BQ32K_TCFE) ? 1 : 0);
 }
 
 static ssize_t bq32k_sysfs_store_tricklecharge_bypass(struct device *dev,
-- 
2.56.0

[PATCH 05/12] rtc: x1205: use sysfs_emit() instead of sprintf()

[alexandre.belloni]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use sysfs_emit() instead of sprintf() in sysfs show callbacks
(x1205_sysfs_show_atrim and x1205_sysfs_show_dtrim) to conform to the
recommended sysfs attribute formatting guidelines in
Documentation/filesystems/sysfs.rst.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-x1205.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index bb1a5c86f621..6ca6ff45945e 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -575,7 +575,7 @@ static ssize_t x1205_sysfs_show_atrim(struct device *dev,
 	if (err)
 		return err;
 
-	return sprintf(buf, "%d.%02d pF\n", atrim / 1000, atrim % 1000);
+	return sysfs_emit(buf, "%d.%02d pF\n", atrim / 1000, atrim % 1000);
 }
 static DEVICE_ATTR(atrim, S_IRUGO, x1205_sysfs_show_atrim, NULL);
 
@@ -588,7 +588,7 @@ static ssize_t x1205_sysfs_show_dtrim(struct device *dev,
 	if (err)
 		return err;
 
-	return sprintf(buf, "%d ppm\n", dtrim);
+	return sysfs_emit(buf, "%d ppm\n", dtrim);
 }
 static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
 
-- 
2.56.0

[PATCH 06/12] rtc: abx80x: use sysfs_emit() instead of sprintf()

[alexandre.belloni]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use sysfs_emit() instead of sprintf() in sysfs show callbacks
(autocalibration_show and oscillator_show) to conform to the
recommended sysfs attribute formatting guidelines in
Documentation/filesystems/sysfs.rst.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-abx80x.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 1c69d0e2f940..a0d67818eb58 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -442,11 +442,11 @@ static ssize_t autocalibration_show(struct device *dev,
 	autocalibration = abx80x_rtc_get_autocalibration(dev->parent);
 	if (autocalibration < 0) {
 		dev_err(dev, "Failed to read RTC autocalibration\n");
-		sprintf(buf, "0\n");
+		sysfs_emit(buf, "0\n");
 		return autocalibration;
 	}
 
-	return sprintf(buf, "%d\n", autocalibration);
+	return sysfs_emit(buf, "%d\n", autocalibration);
 }
 
 static DEVICE_ATTR_RW(autocalibration);
@@ -490,14 +490,14 @@ static ssize_t oscillator_show(struct device *dev,
 
 	if (rc_mode < 0) {
 		dev_err(dev, "Failed to read RTC oscillator selection\n");
-		sprintf(buf, "\n");
+		sysfs_emit(buf, "\n");
 		return rc_mode;
 	}
 
 	if (rc_mode)
-		return sprintf(buf, "rc\n");
+		return sysfs_emit(buf, "rc\n");
 	else
-		return sprintf(buf, "xtal\n");
+		return sysfs_emit(buf, "xtal\n");
 }
 
 static DEVICE_ATTR_RW(oscillator);
-- 
2.56.0

[PATCH 07/12] rtc: rx8025: use sysfs_emit() instead of sprintf()

[alexandre.belloni]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use sysfs_emit() instead of sprintf() in the sysfs show callback
(rx8025_sysfs_show_clock_adjust) to conform to the recommended sysfs
attribute formatting guidelines in Documentation/filesystems/sysfs.rst.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-rx8025.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index 2f2deb59cbee..96a04c977d0f 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -486,7 +486,7 @@ static ssize_t rx8025_sysfs_show_clock_adjust(struct device *dev,
 	if (err)
 		return err;
 
-	return sprintf(buf, "%ld\n", -adj);
+	return sysfs_emit(buf, "%ld\n", -adj);
 }
 
 static ssize_t rx8025_sysfs_store_clock_adjust(struct device *dev,
-- 
2.56.0

[PATCH 08/12] rtc: ds1343: use sysfs_emit() instead of sprintf()

[alexandre.belloni]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use sysfs_emit() instead of sprintf() in sysfs show callbacks
(ds1343_show_glitchfilter and ds1343_show_tricklecharger) to conform
to the recommended sysfs attribute formatting guidelines in
Documentation/filesystems/sysfs.rst.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-ds1343.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/rtc/rtc-ds1343.c b/drivers/rtc/rtc-ds1343.c
index 22abec4ba656..0ec5eaba6bd4 100644
--- a/drivers/rtc/rtc-ds1343.c
+++ b/drivers/rtc/rtc-ds1343.c
@@ -94,9 +94,9 @@ static ssize_t ds1343_show_glitchfilter(struct device *dev,
 	glitch_filt_status = !!(data & DS1343_EGFIL);
 
 	if (glitch_filt_status)
-		return sprintf(buf, "enabled\n");
+		return sysfs_emit(buf, "enabled\n");
 	else
-		return sprintf(buf, "disabled\n");
+		return sysfs_emit(buf, "disabled\n");
 }
 
 static ssize_t ds1343_store_glitchfilter(struct device *dev,
@@ -180,7 +180,7 @@ static ssize_t ds1343_show_tricklecharger(struct device *dev,
 		}
 	}
 
-	return sprintf(buf, "%s %s\n", diodes, resistors);
+	return sysfs_emit(buf, "%s %s\n", diodes, resistors);
 }
 
 static DEVICE_ATTR(trickle_charger, 0444, ds1343_show_tricklecharger, NULL);
-- 
2.56.0

[PATCH 09/12] rtc: ds1685: use sysfs_emit() instead of sprintf()

[alexandre.belloni]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use sysfs_emit() instead of sprintf() in sysfs show callbacks
(ds1685_rtc_sysfs_battery_show, ds1685_rtc_sysfs_auxbatt_show and
ds1685_rtc_sysfs_serial_show) to conform to the recommended sysfs
attribute formatting guidelines in
Documentation/filesystems/sysfs.rst.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-ds1685.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c
index 284815e5f478..323fc9c17106 100644
--- a/drivers/rtc/rtc-ds1685.c
+++ b/drivers/rtc/rtc-ds1685.c
@@ -988,8 +988,8 @@ ds1685_rtc_sysfs_battery_show(struct device *dev,
 
 	ctrld = rtc->read(rtc, RTC_CTRL_D);
 
-	return sprintf(buf, "%s\n",
-			(ctrld & RTC_CTRL_D_VRT) ? "ok" : "not ok or N/A");
+	return sysfs_emit(buf, "%s\n",
+			  (ctrld & RTC_CTRL_D_VRT) ? "ok" : "not ok or N/A");
 }
 static DEVICE_ATTR(battery, S_IRUGO, ds1685_rtc_sysfs_battery_show, NULL);
 
@@ -1010,8 +1010,8 @@ ds1685_rtc_sysfs_auxbatt_show(struct device *dev,
 	ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
 	ds1685_rtc_switch_to_bank0(rtc);
 
-	return sprintf(buf, "%s\n",
-			(ctrl4a & RTC_CTRL_4A_VRT2) ? "ok" : "not ok or N/A");
+	return sysfs_emit(buf, "%s\n",
+			  (ctrl4a & RTC_CTRL_4A_VRT2) ? "ok" : "not ok or N/A");
 }
 static DEVICE_ATTR(auxbatt, S_IRUGO, ds1685_rtc_sysfs_auxbatt_show, NULL);
 
@@ -1032,7 +1032,7 @@ ds1685_rtc_sysfs_serial_show(struct device *dev,
 	ds1685_rtc_get_ssn(rtc, ssn);
 	ds1685_rtc_switch_to_bank0(rtc);
 
-	return sprintf(buf, "%8phC\n", ssn);
+	return sysfs_emit(buf, "%8phC\n", ssn);
 }
 static DEVICE_ATTR(serial, S_IRUGO, ds1685_rtc_sysfs_serial_show, NULL);
 
-- 
2.56.0

[PATCH 10/12] rtc: isl1208: use sysfs_emit() instead of sprintf()

[alexandre.belloni]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use sysfs_emit() instead of sprintf() in sysfs show callbacks
(timestamp0_show, isl1208_sysfs_show_atrim, isl1208_sysfs_show_dtrim
and isl1208_sysfs_show_usr) to conform to the recommended sysfs
attribute formatting guidelines in
Documentation/filesystems/sysfs.rst.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-isl1208.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index 9bdd5d121571..ee2eb8c475ea 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -615,8 +615,8 @@ static ssize_t timestamp0_show(struct device *dev,
 	if (sr)
 		return sr;
 
-	return sprintf(buf, "%llu\n",
-				(unsigned long long)rtc_tm_to_time64(&tm));
+	return sysfs_emit(buf, "%llu\n",
+			  (unsigned long long)rtc_tm_to_time64(&tm));
 };
 
 static DEVICE_ATTR_RW(timestamp0);
@@ -709,7 +709,7 @@ isl1208_sysfs_show_atrim(struct device *dev,
 	if (atr < 0)
 		return atr;
 
-	return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
+	return sysfs_emit(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
 }
 
 static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
@@ -722,7 +722,7 @@ isl1208_sysfs_show_dtrim(struct device *dev,
 	if (dtr < 0)
 		return dtr;
 
-	return sprintf(buf, "%d ppm\n", dtr - 100);
+	return sysfs_emit(buf, "%d ppm\n", dtr - 100);
 }
 
 static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
@@ -735,7 +735,7 @@ isl1208_sysfs_show_usr(struct device *dev,
 	if (usr < 0)
 		return usr;
 
-	return sprintf(buf, "0x%.4x\n", usr);
+	return sysfs_emit(buf, "0x%.4x\n", usr);
 }
 
 static ssize_t
-- 
2.56.0

[PATCH 11/12] rtc: ds1307: use sysfs_emit() instead of sprintf()

[alexandre.belloni]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use sysfs_emit() instead of sprintf() in the sysfs show callback
(ds3231_hwmon_show_temp) to conform to the recommended sysfs attribute
formatting guidelines in Documentation/filesystems/sysfs.rst.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-ds1307.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 8627f84232ce..206a79d28568 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -1380,7 +1380,7 @@ static ssize_t ds3231_hwmon_show_temp(struct device *dev,
 	if (ret)
 		return ret;
 
-	return sprintf(buf, "%d\n", temp);
+	return sysfs_emit(buf, "%d\n", temp);
 }
 static SENSOR_DEVICE_ATTR(temp1_input, 0444, ds3231_hwmon_show_temp,
 			  NULL, 0);
-- 
2.56.0

[PATCH 12/12] rtc: rs5c372: use sysfs_emit() instead of sprintf()

[alexandre.belloni]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

Use sysfs_emit() instead of sprintf() in sysfs show callbacks
(rs5c372_sysfs_show_trim and rs5c372_sysfs_show_osc) to conform to the
recommended sysfs attribute formatting guidelines in
Documentation/filesystems/sysfs.rst.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/rtc/rtc-rs5c372.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index 9ab6f2c28f7b..a4bd042908b8 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -699,7 +699,7 @@ static ssize_t rs5c372_sysfs_show_trim(struct device *dev,
 	if (err)
 		return err;
 
-	return sprintf(buf, "%d\n", trim);
+	return sysfs_emit(buf, "%d\n", trim);
 }
 static DEVICE_ATTR(trim, S_IRUGO, rs5c372_sysfs_show_trim, NULL);
 
@@ -712,7 +712,7 @@ static ssize_t rs5c372_sysfs_show_osc(struct device *dev,
 	if (err)
 		return err;
 
-	return sprintf(buf, "%d.%03d KHz\n", osc / 1000, osc % 1000);
+	return sysfs_emit(buf, "%d.%03d KHz\n", osc / 1000, osc % 1000);
 }
 static DEVICE_ATTR(osc, S_IRUGO, rs5c372_sysfs_show_osc, NULL);
 
-- 
2.56.0

Re: [PATCH 08/12] rtc: ds1343: use sysfs_emit() instead of sprintf()

[sashiko-bot]

> From: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> Use sysfs_emit() instead of sprintf() in sysfs show callbacks
> (ds1343_show_glitchfilter and ds1343_show_tricklecharger) to conform
> to the recommended sysfs attribute formatting guidelines in
> Documentation/filesystems/sysfs.rst.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261029132339.925021-1-alexandre.belloni@bootlin.com?part=8

Re: [PATCH 03/12] rtc: ep93xx: use sysfs_emit() instead of sprintf()

[sashiko-bot]

> From: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> Use sysfs_emit() instead of sprintf() in sysfs show callbacks
> (comp_preload_show and comp_delete_show) to conform to the
> recommended sysfs attribute formatting guidelines in
> Documentation/filesystems/sysfs.rst.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261029132339.925021-1-alexandre.belloni@bootlin.com?part=3

Re: [PATCH 06/12] rtc: abx80x: use sysfs_emit() instead of sprintf()

[sashiko-bot]

> From: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> Use sysfs_emit() instead of sprintf() in sysfs show callbacks
> (autocalibration_show and oscillator_show) to conform to the
> recommended sysfs attribute formatting guidelines in
> Documentation/filesystems/sysfs.rst.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261029132339.925021-1-alexandre.belloni@bootlin.com?part=6

Re: [PATCH 02/12] rtc: pcf2127: use sysfs_emit() instead of sprintf()

[sashiko-bot]

> From: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> Use sysfs_emit() instead of sprintf() in the sysfs show callback
> (timestamp_show) to conform to the recommended sysfs attribute
> formatting guidelines in Documentation/filesystems/sysfs.rst.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261029132339.925021-1-alexandre.belloni@bootlin.com?part=2

Re: [PATCH 01/12] rtc: rv3029: use sysfs_emit() instead of sprintf()

[sashiko-bot]

> From: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> Use sysfs_emit() instead of sprintf() in sysfs show callbacks
> (rv3029_hwmon_show_temp and rv3029_hwmon_show_update_interval) to
> conform to the recommended sysfs attribute formatting guidelines in
> Documentation/filesystems/sysfs.rst.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261029132339.925021-1-alexandre.belloni@bootlin.com?part=1

Re: [PATCH 05/12] rtc: x1205: use sysfs_emit() instead of sprintf()

[sashiko-bot]

> From: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> Use sysfs_emit() instead of sprintf() in sysfs show callbacks
> (x1205_sysfs_show_atrim and x1205_sysfs_show_dtrim) to conform to the
> recommended sysfs attribute formatting guidelines in
> Documentation/filesystems/sysfs.rst.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261029132339.925021-1-alexandre.belloni@bootlin.com?part=5

Re: [PATCH 11/12] rtc: ds1307: use sysfs_emit() instead of sprintf()

[sashiko-bot]

> From: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> Use sysfs_emit() instead of sprintf() in the sysfs show callback
> (ds3231_hwmon_show_temp) to conform to the recommended sysfs attribute
> formatting guidelines in Documentation/filesystems/sysfs.rst.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261029132339.925021-1-alexandre.belloni@bootlin.com?part=11

Re: [PATCH 10/12] rtc: isl1208: use sysfs_emit() instead of sprintf()

[sashiko-bot]

> From: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> Use sysfs_emit() instead of sprintf() in sysfs show callbacks
> (timestamp0_show, isl1208_sysfs_show_atrim, isl1208_sysfs_show_dtrim
> and isl1208_sysfs_show_usr) to conform to the recommended sysfs
> attribute formatting guidelines in
> Documentation/filesystems/sysfs.rst.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261029132339.925021-1-alexandre.belloni@bootlin.com?part=10

Re: [PATCH 09/12] rtc: ds1685: use sysfs_emit() instead of sprintf()

[sashiko-bot]

> From: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> Use sysfs_emit() instead of sprintf() in sysfs show callbacks
> (ds1685_rtc_sysfs_battery_show, ds1685_rtc_sysfs_auxbatt_show and
> ds1685_rtc_sysfs_serial_show) to conform to the recommended sysfs
> attribute formatting guidelines in
> Documentation/filesystems/sysfs.rst.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261029132339.925021-1-alexandre.belloni@bootlin.com?part=9

Re: [PATCH 04/12] rtc: bq32k: use sysfs_emit() instead of sprintf()

[sashiko-bot]

> From: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> Use sysfs_emit() instead of sprintf() in the sysfs show callback
> (bq32k_sysfs_show_tricklecharge_bypass) to conform to the recommended
> sysfs attribute formatting guidelines in
> Documentation/filesystems/sysfs.rst.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261029132339.925021-1-alexandre.belloni@bootlin.com?part=4

Re: [PATCH 12/12] rtc: rs5c372: use sysfs_emit() instead of sprintf()

[sashiko-bot]

> From: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> Use sysfs_emit() instead of sprintf() in sysfs show callbacks
> (rs5c372_sysfs_show_trim and rs5c372_sysfs_show_osc) to conform to the
> recommended sysfs attribute formatting guidelines in
> Documentation/filesystems/sysfs.rst.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261029132339.925021-1-alexandre.belloni@bootlin.com?part=12

Re: [PATCH 07/12] rtc: rx8025: use sysfs_emit() instead of sprintf()

[sashiko-bot]

> From: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> Use sysfs_emit() instead of sprintf() in the sysfs show callback
> (rx8025_sysfs_show_clock_adjust) to conform to the recommended sysfs
> attribute formatting guidelines in Documentation/filesystems/sysfs.rst.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261029132339.925021-1-alexandre.belloni@bootlin.com?part=7

Re: [PATCH 09/12] rtc: ds1685: use sysfs_emit() instead of sprintf()

[Joshua Kinard]

On 10/29/2026 09:23, alexandre.belloni@bootlin.com wrote:
> From: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> Use sysfs_emit() instead of sprintf() in sysfs show callbacks
> (ds1685_rtc_sysfs_battery_show, ds1685_rtc_sysfs_auxbatt_show and
> ds1685_rtc_sysfs_serial_show) to conform to the recommended sysfs
> attribute formatting guidelines in
> Documentation/filesystems/sysfs.rst.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
>   drivers/rtc/rtc-ds1685.c | 10 +++++-----
>   1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c
> index 284815e5f478..323fc9c17106 100644
> --- a/drivers/rtc/rtc-ds1685.c
> +++ b/drivers/rtc/rtc-ds1685.c
> @@ -988,8 +988,8 @@ ds1685_rtc_sysfs_battery_show(struct device *dev,
>   
>   	ctrld = rtc->read(rtc, RTC_CTRL_D);
>   
> -	return sprintf(buf, "%s\n",
> -			(ctrld & RTC_CTRL_D_VRT) ? "ok" : "not ok or N/A");
> +	return sysfs_emit(buf, "%s\n",
> +			  (ctrld & RTC_CTRL_D_VRT) ? "ok" : "not ok or N/A");
>   }
>   static DEVICE_ATTR(battery, S_IRUGO, ds1685_rtc_sysfs_battery_show, NULL);
>   
> @@ -1010,8 +1010,8 @@ ds1685_rtc_sysfs_auxbatt_show(struct device *dev,
>   	ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
>   	ds1685_rtc_switch_to_bank0(rtc);
>   
> -	return sprintf(buf, "%s\n",
> -			(ctrl4a & RTC_CTRL_4A_VRT2) ? "ok" : "not ok or N/A");
> +	return sysfs_emit(buf, "%s\n",
> +			  (ctrl4a & RTC_CTRL_4A_VRT2) ? "ok" : "not ok or N/A");
>   }
>   static DEVICE_ATTR(auxbatt, S_IRUGO, ds1685_rtc_sysfs_auxbatt_show, NULL);
>   
> @@ -1032,7 +1032,7 @@ ds1685_rtc_sysfs_serial_show(struct device *dev,
>   	ds1685_rtc_get_ssn(rtc, ssn);
>   	ds1685_rtc_switch_to_bank0(rtc);
>   
> -	return sprintf(buf, "%8phC\n", ssn);
> +	return sysfs_emit(buf, "%8phC\n", ssn);
>   }
>   static DEVICE_ATTR(serial, S_IRUGO, ds1685_rtc_sysfs_serial_show, NULL);
>   

Acked-by: Joshua Kinard <linux@kumba.dev>