From: sashiko-bot@kernel.org
To: "Joseph Telaak" <joseph@telaak.dev>
Cc: linux-leds@vger.kernel.org, lee@kernel.org
Subject: Re: [PATCH v2 06/11] dt-bindings: leds: kinetic,ktd202x: Add Etek ET6326
Date: Mon, 09 Nov 2026 19:07:08 +0000 [thread overview]
Message-ID: <sashiko-outbox-205456@kernel.org> (raw)
In-Reply-To: <20261109-ktd202x-et6326-v2-6-56e97c226658@telaak.dev>
> From: Joseph Telaak <joseph@telaak.dev>
>
> The Etek ET6326 is a 3 channel LED driver with the register map, the I2C
> address and the current steps of the KTD2026. It only differs in the
> flash period, which is (Reg1 + 1) * 128 ms instead of 256 ms + Reg1 *
> 128 ms, so a KTD2026 driver runs it with blink periods that are 128 ms
> off. Document it with the KTD2026 as fallback.
>
> The ET6326 drives the status LED of the GL.iNet GL-SFT1200 (Opal).
>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> Signed-off-by: Joseph Telaak <joseph@telaak.dev>
Sashiko has reviewed this patch and found no issues.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261109-ktd202x-et6326-v2-0-56e97c226658@telaak.dev?part=6
next prev parent reply other threads:[~2026-11-09 19:07 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-09 19:03 [PATCH v2 00/11] leds: ktd202x: Add Etek ET6326, hardware breathing and fixes Joseph Telaak
2026-11-09 19:03 ` Joseph Telaak via B4 Relay
2026-11-09 19:03 ` [PATCH v2 01/11] leds: rgb: ktd202x: Fix the flash period of short blinks on 32 bit Joseph Telaak
2026-11-09 19:03 ` Joseph Telaak via B4 Relay
2026-11-09 19:07 ` sashiko-bot
2026-11-09 19:03 ` [PATCH v2 02/11] leds: rgb: ktd202x: Fix an out-of-bounds read with unused channels Joseph Telaak
2026-11-09 19:03 ` Joseph Telaak via B4 Relay
2026-11-09 19:10 ` sashiko-bot
2026-11-09 19:03 ` [PATCH v2 03/11] leds: rgb: ktd202x: Never program an on time of zero Joseph Telaak
2026-11-09 19:03 ` Joseph Telaak via B4 Relay
2026-11-09 19:08 ` sashiko-bot
2026-11-09 19:03 ` [PATCH v2 04/11] leds: rgb: ktd202x: Fix a division by zero with long blinks Joseph Telaak
2026-11-09 19:03 ` Joseph Telaak via B4 Relay
2026-11-09 19:09 ` sashiko-bot
2026-11-09 19:03 ` [PATCH v2 05/11] leds: rgb: ktd202x: Keep the unlit colors of a blinking LED off Joseph Telaak
2026-11-09 19:03 ` Joseph Telaak via B4 Relay
2026-11-09 19:10 ` sashiko-bot
2026-11-09 19:03 ` [PATCH v2 06/11] dt-bindings: leds: kinetic,ktd202x: Add Etek ET6326 Joseph Telaak
2026-11-09 19:03 ` Joseph Telaak via B4 Relay
2026-11-09 19:07 ` sashiko-bot [this message]
2026-11-09 19:03 ` [PATCH v2 07/11] leds: rgb: ktd202x: Add Etek ET6326 support Joseph Telaak
2026-11-09 19:03 ` Joseph Telaak via B4 Relay
2026-11-09 19:09 ` sashiko-bot
2026-11-09 19:03 ` [PATCH v2 08/11] leds: rgb: ktd202x: Add hardware pattern support Joseph Telaak
2026-11-09 19:03 ` Joseph Telaak via B4 Relay
2026-11-09 19:18 ` sashiko-bot
2026-11-09 19:03 ` [PATCH v2 09/11] leds: rgb: ktd202x: Limit the LED current to led-max-microamp Joseph Telaak
2026-11-09 19:03 ` Joseph Telaak via B4 Relay
2026-11-09 19:12 ` sashiko-bot
2026-11-09 19:03 ` [PATCH v2 10/11] leds: rgb: ktd202x: Fail the probe when the chip does not answer Joseph Telaak
2026-11-09 19:03 ` Joseph Telaak via B4 Relay
2026-11-09 19:13 ` sashiko-bot
2026-11-09 19:03 ` [PATCH v2 11/11] leds: rgb: ktd202x: Don't let a blinking LED retime another one Joseph Telaak
2026-11-09 19:03 ` Joseph Telaak via B4 Relay
2026-11-09 19:27 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-205456@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=joseph@telaak.dev \
--cc=lee@kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.