From: sashiko-bot@kernel.org
To: "Shivasharan S" <shivasharan.srikanteshwara@broadcom.com>,
linux-scsi@vger.kernel.org
Subject: Re: [PATCH v2 23/37] scsi: mpt3sas: Validate phy_number in mpt3sas_transport_update_links
Date: Wed, 18 Nov 2026 10:42:22 +0000 [thread overview]
Message-ID: <sashiko-outbox-220734@kernel.org> (raw)
In-Reply-To: <1794995806-5835-24-git-send-email-shivasharan.srikanteshwara@broadcom.com>
Thank you for your contribution! Sashiko AI review found 2 potential
issues to consider:
- [Medium] scsi: mpt3sas: mpt3sas_transport_update_links() breaks
disabling HBA phys
- [Low] scsi: mpt3sas: missing Fixes trailer for
mpt3sas_transport_update_links() fix
--
commit c51193b4a92bbce96daf63111a51b7401382049e
Author: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
> scsi: mpt3sas: Validate phy_number in mpt3sas_transport_update_links
>
> Check phy_number against sas_node->num_phys before indexing the phy
> array.
>
> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
[Severity: Low]
Should this bug fix include a Fixes tag:
Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
> index e88205b69067f..5f087d0b4d7a9 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
> @@ -1176,6 +1176,11 @@ mpt3sas_transport_update_links(struct MPT3SAS_ADAPTER *ioc,
> return;
> }
>
> + if (phy_number >= sas_node->num_phys) {
> + spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
> + return;
> + }
> +
> mpt3sas_phy = &sas_node->phy[phy_number];
> mpt3sas_phy->attached_handle = handle;
> spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
[Severity: Medium]
Does this regression break disabling excess HBA phys in
_scsih_sas_host_refresh()?
When HBA firmware is downgraded to an image exposing fewer phys,
_scsih_sas_port_refresh() updates ioc->sas_hba.num_phys to the lower count,
and _scsih_sas_host_refresh() then disables the remaining allocated phys:
drivers/scsi/mpt3sas/mpt3sas_scsih.c:_scsih_sas_host_refresh() {
...
for (i = ioc->sas_hba.num_phys;
i < ioc->sas_hba.nr_phys_allocated; i++) {
if (ioc->sas_hba.phy[i].phy &&
ioc->sas_hba.phy[i].phy->negotiated_linkrate >=
SAS_LINK_RATE_1_5_GBPS)
mpt3sas_transport_update_links(ioc,
ioc->sas_hba.sas_address, 0, i,
MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED, NULL);
}
}
Because sas_node is &ioc->sas_hba here and i starts at sas_node->num_phys,
every call in this loop now returns early without clearing attached_handle,
remote_identify, or negotiated_linkrate on the disabled phys.
--
Sashiko AI review · https://sashiko.dev/#/patchset/1794995806-5835-1-git-send-email-shivasharan.srikanteshwara@broadcom.com?part=23
next prev parent reply other threads:[~2026-11-18 10:42 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 9:56 [PATCH v2 00/37] scsi: mpt3sas: Validate firmware/user input and fix error-path bugs Shivasharan S
2026-11-18 9:56 ` [PATCH v2 01/37] scsi: mpt3sas: Validate firmware-reported IOCRequestFrameSize Shivasharan S
2026-11-18 10:28 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 02/37] scsi: mpt3sas: Validate RAID configuration page length Shivasharan S
2026-11-18 10:22 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 03/37] scsi: mpt3sas: Pin Scsi_Host while an ioctl is using its ioc Shivasharan S
2026-11-18 10:41 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 04/37] scsi: mpt3sas: Fix locking and bounds checks on host_trace_buffer sysfs files Shivasharan S
2026-11-18 10:37 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 05/37] scsi: mpt3sas: Fix unlocked use of raid_device in enable_sdev_max_qd_store Shivasharan S
2026-11-18 10:36 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 06/37] scsi: mpt3sas: Fix invalid kfree() of fw_event_work event_data Shivasharan S
2026-11-18 10:30 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 07/37] scsi: mpt3sas: Validate SMP request/response length in bsg handler Shivasharan S
2026-11-18 10:29 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 08/37] scsi: mpt3sas: Validate firmware/user supplied device handles against MaxDevHandle Shivasharan S
2026-11-18 10:33 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 09/37] scsi: mpt3sas: Clamp topology/IR event entry counts to EventDataLength Shivasharan S
2026-11-18 9:56 ` [PATCH v2 10/37] scsi: mpt3sas: NULL ioc->reply_post after freeing it Shivasharan S
2026-11-18 10:27 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 11/37] scsi: mpt3sas: Fix port_table memory leak in _scsih_sas_port_refresh Shivasharan S
2026-11-18 10:22 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 12/37] scsi: mpt3sas: Fix leak and dangling pointer for io_uring_poll_queues Shivasharan S
2026-11-18 10:32 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 13/37] scsi: mpt3sas: Validate max_data_size in MPT3EVENTREPORT ioctl Shivasharan S
2026-11-18 10:20 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 14/37] scsi: mpt3sas: Fix buffer overflow in _scsih_scsi_ioc_info Shivasharan S
2026-11-18 10:21 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 15/37] scsi: mpt3sas: Fix Scsi_Host leak on invalid/tampered device probe Shivasharan S
2026-11-18 10:26 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 16/37] scsi: mpt3sas: Fix page fault from stale ioc->chip after PCI error recovery Shivasharan S
2026-11-18 9:56 ` [PATCH v2 17/37] scsi: mpt3sas: Clamp ValidEntries in driver trigger page update helpers Shivasharan S
2026-11-18 10:29 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 18/37] scsi: mpt3sas: Clamp firmware reply copies to the allocated reply buffer Shivasharan S
2026-11-18 10:29 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 19/37] scsi: mpt3sas: Reject implausibly small MaxReplyDescriptorPostQueueDepth Shivasharan S
2026-11-18 10:33 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 20/37] scsi: mpt3sas: Validate CurrentHostPageSize before using it as a shift amount Shivasharan S
2026-11-18 10:33 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 21/37] scsi: mpt3sas: Clamp sense_length before copying into transfer_packet->sense Shivasharan S
2026-11-18 10:35 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 22/37] scsi: mpt3sas: Clamp num_luns in _scsih_wait_for_target_to_become_ready Shivasharan S
2026-11-18 10:32 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 23/37] scsi: mpt3sas: Validate phy_number in mpt3sas_transport_update_links Shivasharan S
2026-11-18 10:42 ` sashiko-bot [this message]
2026-11-18 9:56 ` [PATCH v2 24/37] scsi: mpt3sas: Require CAP_SYS_RAWIO for mpt2ctl/mpt3ctl ioctls Shivasharan S
2026-11-18 9:56 ` [PATCH v2 25/37] scsi: mpt3sas: Fix SGE offset boundary check in _ctl_do_mpt_command Shivasharan S
2026-11-18 10:39 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 26/37] scsi: mpt3sas: Enforce minimum reply frame size and validate chain segment size Shivasharan S
2026-11-18 10:46 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 27/37] scsi: mpt3sas: Replace panic() with error return in hard_reset_handler Shivasharan S
2026-11-18 9:56 ` [PATCH v2 28/37] scsi: mpt3sas: Replace panic() calls with error returns in _config_request Shivasharan S
2026-11-18 9:56 ` [PATCH v2 29/37] scsi: mpt3sas: Bound event-log copy size against reply frame size Shivasharan S
2026-11-18 10:39 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 30/37] scsi: mpt3sas: Add _ctl_diag_buffer_reset() helper to clear diag buffer state Shivasharan S
2026-11-18 9:56 ` [PATCH v2 31/37] scsi: mpt3sas: Restrict ioc_dump debugfs and replace raw ioc dump with text Shivasharan S
2026-11-18 10:38 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 32/37] scsi: mpt3sas: Fix out-of-bounds bit operation in _scsih_check_topo_delete_events Shivasharan S
2026-11-18 10:38 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 33/37] scsi: mpt3sas: Bound SMP passthrough buffer reads to actual buffer size Shivasharan S
2026-11-18 10:40 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 34/37] scsi: mpt3sas: Release sas_device reference on error in mpt3sas_transport_port_add Shivasharan S
2026-11-18 10:51 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 35/37] scsi: mpt3sas: NULL the event_log pointer after freeing it Shivasharan S
2026-11-18 9:56 ` [PATCH v2 36/37] scsi: mpt3sas: Bound NVMe passthrough transfer size against PRP buffer capacity Shivasharan S
2026-11-18 10:47 ` sashiko-bot
2026-11-18 9:56 ` [PATCH v2 37/37] scsi: mpt3sas: Update driver version to 59.100.00.00 Shivasharan S
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-220734@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=shivasharan.srikanteshwara@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.