All of lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Shivasharan S" <shivasharan.srikanteshwara@broadcom.com>,
	linux-scsi@vger.kernel.org
Subject: Re: [PATCH v2 26/37] scsi: mpt3sas: Enforce minimum reply frame size and validate chain segment size
Date: Wed, 18 Nov 2026 10:46:06 +0000	[thread overview]
Message-ID: <sashiko-outbox-220742@kernel.org> (raw)
In-Reply-To: <1794995806-5835-27-git-send-email-shivasharan.srikanteshwara@broadcom.com>

Thank you for your contribution! Sashiko AI review found 2 potential
issues to consider:
- [Medium] scsi: mpt3sas: NextChainOffset check in
  _base_allocate_memory_pools() misses MPI 2.0
- [Low] scsi: mpt3sas: commit message names MPI2DefaultReply_t instead
  of Mpi2SCSIIOReply_t
--

commit b46a865c83daa42dd070e27d812f6e7261e3209a
Author: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>

scsi: mpt3sas: Enforce minimum reply frame size and validate chain segment size

This commit enforces a minimum firmware-reported reply frame size and
validates the chain segment size and SGE count per chain segment in
_base_allocate_memory_pools().

> In _base_allocate_memory_pools(), reject a firmware-reported ReplyFrameSize
> smaller than MPI2DefaultReply_t and validate IOCMaxChainSegmentSize to avoid
> integer overflow and out-of-bounds access during SGL construction.

[Severity: Low]
This isn't a bug, but the commit message says ReplyFrameSize is checked
against MPI2DefaultReply_t, whereas the code checks against
sizeof(Mpi2SCSIIOReply_t).

> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
> index dce8378f9347e..2f993dad91757 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_base.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
[ ... ]
> @@ -6422,6 +6450,13 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
>  	/* now do the same for a chain buffer */
>  	max_sge_elements = ioc->chain_segment_sz - sge_size;
>  	ioc->max_sges_in_chain_message = max_sge_elements/sge_size;
> +	/* the SGE count is stored in the u8 NextChainOffset field */
> +	if (ioc->max_sges_in_chain_message > U8_MAX) {
> +		ioc_err(ioc,
> +			"too many SGEs per chain segment (%u), cannot safely attach\n",
> +			ioc->max_sges_in_chain_message);
> +		return -EINVAL;
> +	}

[Severity: Medium]
Can NextChainOffset still overflow on MPI 2.0 controllers even with this
check?

Storing the SGE count in NextChainOffset only applies to MPI 2.5/2.6 IEEE
SGLs in _base_build_sg_scmd_ieee().  For MPI 2.0 controllers,
ioc->chain_segment_sz is set to ioc->request_sz, and _base_build_sg_scmd()
computes NextChainOffset in 4-byte DWORDs rather than SGEs:

drivers/scsi/mpt3sas/mpt3sas_base.c:_base_build_sg_scmd() {
	...
		chain_offset = (sges_left == sges_in_segment) ?
		    0 : (sges_in_segment * ioc->sge_size)/4;
		chain_length = sges_in_segment * ioc->sge_size;
		if (chain_offset) {
			chain_offset = chain_offset <<
			    MPI2_SGE_CHAIN_OFFSET_SHIFT;
			chain_length += ioc->sge_size;
		}
		ioc->base_add_sg_single(sg_local, chain_flags | chain_offset |
		    chain_length, chain_dma);
	...
}

With 12-byte 64-bit SGEs (or 8-byte 32-bit SGEs), a
max_sges_in_chain_message between 86 and 255 passes the U8_MAX check, but
chain_offset exceeds 255 and shifts into the SGE Flags byte at bits 24..31,
corrupting the chain SGE descriptor.

In addition, mpi_request->ChainOffset in the main request frame is a u8
computed from ioc->request_sz in both _base_build_sg_scmd() (in DWORDs) and
_base_build_sg_scmd_ieee() (in SGEs), which is not bounded by the
chain_segment_sz check when ioc->request_sz is large.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/1794995806-5835-1-git-send-email-shivasharan.srikanteshwara@broadcom.com?part=26

  reply	other threads:[~2026-11-18 10:46 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-18  9:56 [PATCH v2 00/37] scsi: mpt3sas: Validate firmware/user input and fix error-path bugs Shivasharan S
2026-11-18  9:56 ` [PATCH v2 01/37] scsi: mpt3sas: Validate firmware-reported IOCRequestFrameSize Shivasharan S
2026-11-18 10:28   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 02/37] scsi: mpt3sas: Validate RAID configuration page length Shivasharan S
2026-11-18 10:22   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 03/37] scsi: mpt3sas: Pin Scsi_Host while an ioctl is using its ioc Shivasharan S
2026-11-18 10:41   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 04/37] scsi: mpt3sas: Fix locking and bounds checks on host_trace_buffer sysfs files Shivasharan S
2026-11-18 10:37   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 05/37] scsi: mpt3sas: Fix unlocked use of raid_device in enable_sdev_max_qd_store Shivasharan S
2026-11-18 10:36   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 06/37] scsi: mpt3sas: Fix invalid kfree() of fw_event_work event_data Shivasharan S
2026-11-18 10:30   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 07/37] scsi: mpt3sas: Validate SMP request/response length in bsg handler Shivasharan S
2026-11-18 10:29   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 08/37] scsi: mpt3sas: Validate firmware/user supplied device handles against MaxDevHandle Shivasharan S
2026-11-18 10:33   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 09/37] scsi: mpt3sas: Clamp topology/IR event entry counts to EventDataLength Shivasharan S
2026-11-18  9:56 ` [PATCH v2 10/37] scsi: mpt3sas: NULL ioc->reply_post after freeing it Shivasharan S
2026-11-18 10:27   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 11/37] scsi: mpt3sas: Fix port_table memory leak in _scsih_sas_port_refresh Shivasharan S
2026-11-18 10:22   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 12/37] scsi: mpt3sas: Fix leak and dangling pointer for io_uring_poll_queues Shivasharan S
2026-11-18 10:32   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 13/37] scsi: mpt3sas: Validate max_data_size in MPT3EVENTREPORT ioctl Shivasharan S
2026-11-18 10:20   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 14/37] scsi: mpt3sas: Fix buffer overflow in _scsih_scsi_ioc_info Shivasharan S
2026-11-18 10:21   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 15/37] scsi: mpt3sas: Fix Scsi_Host leak on invalid/tampered device probe Shivasharan S
2026-11-18 10:26   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 16/37] scsi: mpt3sas: Fix page fault from stale ioc->chip after PCI error recovery Shivasharan S
2026-11-18 11:01   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 17/37] scsi: mpt3sas: Clamp ValidEntries in driver trigger page update helpers Shivasharan S
2026-11-18 10:29   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 18/37] scsi: mpt3sas: Clamp firmware reply copies to the allocated reply buffer Shivasharan S
2026-11-18 10:29   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 19/37] scsi: mpt3sas: Reject implausibly small MaxReplyDescriptorPostQueueDepth Shivasharan S
2026-11-18 10:33   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 20/37] scsi: mpt3sas: Validate CurrentHostPageSize before using it as a shift amount Shivasharan S
2026-11-18 10:33   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 21/37] scsi: mpt3sas: Clamp sense_length before copying into transfer_packet->sense Shivasharan S
2026-11-18 10:35   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 22/37] scsi: mpt3sas: Clamp num_luns in _scsih_wait_for_target_to_become_ready Shivasharan S
2026-11-18 10:32   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 23/37] scsi: mpt3sas: Validate phy_number in mpt3sas_transport_update_links Shivasharan S
2026-11-18 10:42   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 24/37] scsi: mpt3sas: Require CAP_SYS_RAWIO for mpt2ctl/mpt3ctl ioctls Shivasharan S
2026-11-18  9:56 ` [PATCH v2 25/37] scsi: mpt3sas: Fix SGE offset boundary check in _ctl_do_mpt_command Shivasharan S
2026-11-18 10:39   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 26/37] scsi: mpt3sas: Enforce minimum reply frame size and validate chain segment size Shivasharan S
2026-11-18 10:46   ` sashiko-bot [this message]
2026-11-18  9:56 ` [PATCH v2 27/37] scsi: mpt3sas: Replace panic() with error return in hard_reset_handler Shivasharan S
2026-11-18  9:56 ` [PATCH v2 28/37] scsi: mpt3sas: Replace panic() calls with error returns in _config_request Shivasharan S
2026-11-18  9:56 ` [PATCH v2 29/37] scsi: mpt3sas: Bound event-log copy size against reply frame size Shivasharan S
2026-11-18 10:39   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 30/37] scsi: mpt3sas: Add _ctl_diag_buffer_reset() helper to clear diag buffer state Shivasharan S
2026-11-18  9:56 ` [PATCH v2 31/37] scsi: mpt3sas: Restrict ioc_dump debugfs and replace raw ioc dump with text Shivasharan S
2026-11-18 10:38   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 32/37] scsi: mpt3sas: Fix out-of-bounds bit operation in _scsih_check_topo_delete_events Shivasharan S
2026-11-18 10:38   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 33/37] scsi: mpt3sas: Bound SMP passthrough buffer reads to actual buffer size Shivasharan S
2026-11-18 10:40   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 34/37] scsi: mpt3sas: Release sas_device reference on error in mpt3sas_transport_port_add Shivasharan S
2026-11-18 10:51   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 35/37] scsi: mpt3sas: NULL the event_log pointer after freeing it Shivasharan S
2026-11-18  9:56 ` [PATCH v2 36/37] scsi: mpt3sas: Bound NVMe passthrough transfer size against PRP buffer capacity Shivasharan S
2026-11-18 10:47   ` sashiko-bot
2026-11-18  9:56 ` [PATCH v2 37/37] scsi: mpt3sas: Update driver version to 59.100.00.00 Shivasharan S

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-220742@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=shivasharan.srikanteshwara@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.