* [PATCH v3 1/2] hwmon: (pmbus/max16601) Support byte data writes on VSA rail
@ 2026-11-20 2:44 Arthur Korn
2026-11-20 2:44 ` [PATCH v3 2/2] hwmon: (pmbus) Clear only CML command and data faults during probe Arthur Korn
2026-11-20 2:47 ` [PATCH v3 1/2] hwmon: (pmbus/max16601) Support byte data writes on VSA rail sashiko-bot
0 siblings, 2 replies; 4+ messages in thread
From: Arthur Korn @ 2026-11-20 2:44 UTC (permalink / raw)
To: Guenter Roeck; +Cc: linux-hwmon, linux-kernel, Arthur Korn
MAX16601 exposes the secondary VSA rail on virtual PMBus page 2 backed
by a separate I2C client (data->vsa), while page 1 is a read-only
virtual page for VCORE input current and power telemetry. Although the
driver routes byte reads on page 2 to data->vsa via max16601_read_byte()
and PMBUS_CLEAR_FAULTS byte writes via max16601_write_byte(), it does
not implement write_byte_data(), and max16601_write_byte() falls through
to -ENODATA on virtual page 1.
As a result, PMBus 1.2+ byte-data status writes from pmbus_core (such as
clearing individual status bits in pmbus_get_boolean() or clearing
STATUS_CML faults during probe) on page 2 are sent to the primary VCORE
client instead of data->vsa, and byte writes on virtual page 1 fall
through to page 0.
Implement max16601_write_byte_data() mirroring max16601_read_byte() to
forward page 2 byte-data writes to data->vsa and reject virtual page 1
with -EOPNOTSUPP, and reject virtual page 1 in max16601_write_byte() as
well.
Fixes: 2138f8853a00 ("hwmon: (pmbus) Driver for Maxim MAX16601")
Signed-off-by: Arthur Korn <akorn@google.com>
---
Changes in v3:
- New preparatory patch to route MAX16601 page 2 (VSA) byte-data writes
to data->vsa and reject virtual page 1 byte/byte-data writes.
drivers/hwmon/pmbus/max16601.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/pmbus/max16601.c b/drivers/hwmon/pmbus/max16601.c
index 2eca7525..f9138fc0 100644
--- a/drivers/hwmon/pmbus/max16601.c
+++ b/drivers/hwmon/pmbus/max16601.c
@@ -153,14 +153,28 @@ static int max16601_write_byte(struct i2c_client *client, int page, u8 reg)
const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
struct max16601_data *data = to_max16601_data(info);
- if (page == 2) {
- if (reg == PMBUS_CLEAR_FAULTS)
+ if (page > 0) {
+ if (page == 2 && reg == PMBUS_CLEAR_FAULTS)
return i2c_smbus_write_byte(data->vsa, reg);
return -EOPNOTSUPP;
}
return -ENODATA;
}
+static int max16601_write_byte_data(struct i2c_client *client, int page,
+ int reg, u8 value)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct max16601_data *data = to_max16601_data(info);
+
+ if (page > 0) {
+ if (page == 2) /* VSA */
+ return i2c_smbus_write_byte_data(data->vsa, reg, value);
+ return -EOPNOTSUPP;
+ }
+ return -ENODATA;
+}
+
static int max16601_write_word(struct i2c_client *client, int page, int reg,
u16 value)
{
@@ -252,6 +266,7 @@ static struct pmbus_driver_info max16601_info = {
.read_byte_data = max16601_read_byte,
.read_word_data = max16601_read_word,
.write_byte = max16601_write_byte,
+ .write_byte_data = max16601_write_byte_data,
.write_word_data = max16601_write_word,
};
--
2.56.1.703.gf848ed807c-goog
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v3 2/2] hwmon: (pmbus) Clear only CML command and data faults during probe
2026-11-20 2:44 [PATCH v3 1/2] hwmon: (pmbus/max16601) Support byte data writes on VSA rail Arthur Korn
@ 2026-11-20 2:44 ` Arthur Korn
2026-11-20 2:52 ` sashiko-bot
2026-11-20 2:47 ` [PATCH v3 1/2] hwmon: (pmbus/max16601) Support byte data writes on VSA rail sashiko-bot
1 sibling, 1 reply; 4+ messages in thread
From: Arthur Korn @ 2026-11-20 2:44 UTC (permalink / raw)
To: Guenter Roeck; +Cc: linux-hwmon, linux-kernel, Arthur Korn
During driver initialization, register capability probing, and SMBALERT
mask setup, pmbus_core and the generic pmbus driver send CLEAR_FAULTS
(0x03) to clear any communication or command faults triggered while
probing unsupported commands or out-of-range page/register operands.
However, CLEAR_FAULTS unconditionally clears all latched fault status
bits across the device, including hardware power fault registers such as
STATUS_WORD, STATUS_VOUT, STATUS_IOUT, and STATUS_MFR_SPECIFIC. As a
result, a BMC reboot or driver re-probe erases pre-existing voltage
regulator fault telemetry before monitoring or diagnostic tools can
inspect it.
Simply omitting fault clearing during probe is not viable because
probing unsupported commands asserts PB_CML_FAULT_INVALID_COMMAND in
STATUS_CML (causing pmbus_check_status_cml() to fail subsequent checks
with -EIO), and probing out-of-range PMBUS_PAGE or PMBUS_SMBALERT_MASK
operands asserts PB_CML_FAULT_INVALID_DATA and PB_STATUS_CML.
Starting with PMBus Revision 1.2, individual bits in STATUS_CML can be
cleared via Write-1-to-Clear (W1C), a mechanism pmbus_core already uses
in pmbus_get_boolean(). Introduce pmbus_clear_cml_fault() and export
pmbus_clear_cml_faults() in the "PMBUS" module namespace to clear
PB_CML_FAULT_INVALID_COMMAND | PB_CML_FAULT_INVALID_DATA in
PMBUS_STATUS_CML during device initialization, register probing,
pmbus_write_smbalert_mask(), and pmbus_identify() while preserving all
other latched fault bits:
- Verify during pmbus_init_common() that PMBUS_REVISION is valid (>= 1.2
and not 0xff), that the driver does not hook write_byte() without
write_byte_data(), and that PMBUS_STATUS_CML is readable before
enabling STATUS_CML W1C clearing.
- Fall back to pmbus_clear_fault_page() when STATUS_CML W1C is
unavailable or if writing PMBUS_STATUS_CML fails.
Tested on BMC hardware across 130 hwmon devices (105 PMBus devices
covering tda38740/xdpe1a2g5b, isl68137/raa228234, adm1266,
ltc4286/ltc4287, and generic pmbus regulators including TI
tps546e25/tps546b25 and factory write-protected converters), verifying
clean probing with no -EIO regressions, preservation of non-CML status
faults across re-binds, and fallback when writing PMBUS_STATUS_CML is
NACKed.
Signed-off-by: Arthur Korn <akorn@google.com>
---
Changes in v3:
- Clear PB_CML_FAULT_INVALID_DATA in addition to
PB_CML_FAULT_INVALID_COMMAND so out-of-range PMBUS_PAGE and
PMBUS_SMBALERT_MASK operand probes do not leave CML faults latched.
- Use pmbus_clear_cml_fault() in pmbus_write_smbalert_mask() so IRQ
setup during probe also preserves pre-existing non-CML faults.
- Gate STATUS_CML W1C clearing via data->has_status_cml in
pmbus_init_common() (requiring valid PMBUS_REVISION >= 1.2 and != 0xff,
no write_byte() hook without write_byte_data(), and readable
PMBUS_STATUS_CML != 0xff) so driver write_byte() / read_byte_data()
filters are respected.
Changes in v2:
- Fall back to pmbus_clear_fault_page() if writing PMBUS_STATUS_CML
fails (e.g. NACK on devices that do not support W1C on STATUS_CML).
- Export pmbus_clear_cml_faults() in the "PMBUS" namespace and use it in
pmbus_identify() (pmbus.c) so generic pmbus devices also preserve
non-CML faults during probe.
- Re-tested on hardware covering generic pmbus_identify() fault
preservation and the STATUS_CML write-failure fallback path.
drivers/hwmon/pmbus/pmbus.c | 2 +-
drivers/hwmon/pmbus/pmbus.h | 1 +
drivers/hwmon/pmbus/pmbus_core.c | 44 +++++++++++++++++++++++++++-----
3 files changed, 39 insertions(+), 8 deletions(-)
diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c
index f8189c11..f239dafb 100644
--- a/drivers/hwmon/pmbus/pmbus.c
+++ b/drivers/hwmon/pmbus/pmbus.c
@@ -113,7 +113,7 @@ static int pmbus_identify(struct i2c_client *client,
info->pages = 1;
}
- pmbus_clear_faults(client);
+ pmbus_clear_cml_faults(client);
}
if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) {
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index 5525c048..8170098f 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -581,6 +581,7 @@ int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,
int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
u8 mask, u8 value);
void pmbus_clear_faults(struct i2c_client *client);
+void pmbus_clear_cml_faults(struct i2c_client *client);
void pmbus_check_and_notify_faults(struct i2c_client *client);
bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index b3aa7f1a..89a96732 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -122,6 +122,7 @@ struct pmbus_data {
#endif
bool has_status_word; /* device uses STATUS_WORD register */
+ bool has_status_cml; /* device supports STATUS_CML W1C */
int (*read_status)(struct i2c_client *client, int page);
s16 currpage; /* current page, -1 for unknown/unset */
@@ -717,6 +718,27 @@ void pmbus_clear_faults(struct i2c_client *client)
}
EXPORT_SYMBOL_NS_GPL(pmbus_clear_faults, "PMBUS");
+static void pmbus_clear_cml_fault(struct i2c_client *client, int page)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+
+ if (!data->has_status_cml ||
+ _pmbus_write_byte_data(client, page, PMBUS_STATUS_CML,
+ PB_CML_FAULT_INVALID_COMMAND |
+ PB_CML_FAULT_INVALID_DATA) < 0)
+ pmbus_clear_fault_page(client, page);
+}
+
+void pmbus_clear_cml_faults(struct i2c_client *client)
+{
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < data->info->pages; i++)
+ pmbus_clear_cml_fault(client, i);
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_clear_cml_faults, "PMBUS");
+
static int pmbus_check_status_cml(struct i2c_client *client)
{
struct pmbus_data *data = i2c_get_clientdata(client);
@@ -745,7 +767,7 @@ static bool pmbus_check_register(struct i2c_client *client,
if (rv < 0 && (data->flags & PMBUS_READ_STATUS_AFTER_FAILED_CHECK))
data->read_status(client, -1);
if (reg < PMBUS_VIRT_BASE)
- pmbus_clear_fault_page(client, -1);
+ pmbus_clear_cml_fault(client, -1);
return rv >= 0;
}
@@ -762,7 +784,7 @@ static bool pmbus_check_status_register(struct i2c_client *client, int page)
status = -EIO;
}
- pmbus_clear_fault_page(client, -1);
+ pmbus_clear_cml_fault(client, -1);
return status >= 0;
}
@@ -790,7 +812,7 @@ static bool __maybe_unused pmbus_check_block_register(struct i2c_client *client,
rv = pmbus_check_status_cml(client);
if (rv < 0 && (data->flags & PMBUS_READ_STATUS_AFTER_FAILED_CHECK))
data->read_status(client, -1);
- pmbus_clear_fault_page(client, -1);
+ pmbus_clear_cml_fault(client, -1);
return rv >= 0;
}
@@ -3046,16 +3068,24 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
data->revision = info->pmbus_revision;
} else {
ret = i2c_smbus_read_byte_data(client, PMBUS_REVISION);
- if (ret >= 0) {
+ if (ret >= 0 && ret != 0xff) {
data->have_pmbus_revision = true;
data->revision = ret;
}
}
+ if (data->revision >= PMBUS_REV_12 &&
+ (!info->write_byte || info->write_byte_data)) {
+ ret = _pmbus_read_byte_data(client, info->pages ? 0 : -1,
+ PMBUS_STATUS_CML);
+ if (ret >= 0 && ret != 0xff)
+ data->has_status_cml = true;
+ }
+
if (data->info->pages)
- pmbus_clear_faults(client);
+ pmbus_clear_cml_faults(client);
else
- pmbus_clear_fault_page(client, -1);
+ pmbus_clear_cml_fault(client, -1);
if (info->identify) {
ret = (*info->identify)(client, info);
@@ -3703,7 +3733,7 @@ static int pmbus_write_smbalert_mask(struct i2c_client *client, u8 page, u8 reg,
* Clear fault systematically in case writing PMBUS_SMBALERT_MASK
* is not supported by the chip.
*/
- pmbus_clear_fault_page(client, page);
+ pmbus_clear_cml_fault(client, page);
return ret;
}
--
2.56.1.703.gf848ed807c-goog
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v3 1/2] hwmon: (pmbus/max16601) Support byte data writes on VSA rail
2026-11-20 2:44 [PATCH v3 1/2] hwmon: (pmbus/max16601) Support byte data writes on VSA rail Arthur Korn
2026-11-20 2:44 ` [PATCH v3 2/2] hwmon: (pmbus) Clear only CML command and data faults during probe Arthur Korn
@ 2026-11-20 2:47 ` sashiko-bot
1 sibling, 0 replies; 4+ messages in thread
From: sashiko-bot @ 2026-11-20 2:47 UTC (permalink / raw)
To: Arthur Korn; +Cc: linux-hwmon
> MAX16601 exposes the secondary VSA rail on virtual PMBus page 2 backed
> by a separate I2C client (data->vsa), while page 1 is a read-only
> virtual page for VCORE input current and power telemetry. Although the
> driver routes byte reads on page 2 to data->vsa via max16601_read_byte()
> and PMBUS_CLEAR_FAULTS byte writes via max16601_write_byte(), it does
> not implement write_byte_data(), and max16601_write_byte() falls through
> to -ENODATA on virtual page 1.
>
> As a result, PMBus 1.2+ byte-data status writes from pmbus_core (such as
> clearing individual status bits in pmbus_get_boolean() or clearing
> STATUS_CML faults during probe) on page 2 are sent to the primary VCORE
> client instead of data->vsa, and byte writes on virtual page 1 fall
> through to page 0.
>
> Implement max16601_write_byte_data() mirroring max16601_read_byte() to
> forward page 2 byte-data writes to data->vsa and reject virtual page 1
> with -EOPNOTSUPP, and reject virtual page 1 in max16601_write_byte() as
> well.
>
> Fixes: 2138f8853a00 ("hwmon: (pmbus) Driver for Maxim MAX16601")
> Signed-off-by: Arthur Korn <akorn@google.com>
Sashiko has reviewed this patch and found no issues.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261120024416.338876-1-akorn@google.com?part=1
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v3 2/2] hwmon: (pmbus) Clear only CML command and data faults during probe
2026-11-20 2:44 ` [PATCH v3 2/2] hwmon: (pmbus) Clear only CML command and data faults during probe Arthur Korn
@ 2026-11-20 2:52 ` sashiko-bot
0 siblings, 0 replies; 4+ messages in thread
From: sashiko-bot @ 2026-11-20 2:52 UTC (permalink / raw)
To: Arthur Korn; +Cc: linux-hwmon
> During driver initialization, register capability probing, and SMBALERT
> mask setup, pmbus_core and the generic pmbus driver send CLEAR_FAULTS
> (0x03) to clear any communication or command faults triggered while
> probing unsupported commands or out-of-range page/register operands.
> However, CLEAR_FAULTS unconditionally clears all latched fault status
> bits across the device, including hardware power fault registers such as
> STATUS_WORD, STATUS_VOUT, STATUS_IOUT, and STATUS_MFR_SPECIFIC. As a
> result, a BMC reboot or driver re-probe erases pre-existing voltage
> regulator fault telemetry before monitoring or diagnostic tools can
> inspect it.
>
> Simply omitting fault clearing during probe is not viable because
> probing unsupported commands asserts PB_CML_FAULT_INVALID_COMMAND in
> STATUS_CML (causing pmbus_check_status_cml() to fail subsequent checks
> with -EIO), and probing out-of-range PMBUS_PAGE or PMBUS_SMBALERT_MASK
> [ ... ]
> clean probing with no -EIO regressions, preservation of non-CML status
> faults across re-binds, and fallback when writing PMBUS_STATUS_CML is
> NACKed.
>
> Signed-off-by: Arthur Korn <akorn@google.com>
Sashiko has reviewed this patch and found no issues.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261120024416.338876-1-akorn@google.com?part=2
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2026-11-20 2:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-20 2:44 [PATCH v3 1/2] hwmon: (pmbus/max16601) Support byte data writes on VSA rail Arthur Korn
2026-11-20 2:44 ` [PATCH v3 2/2] hwmon: (pmbus) Clear only CML command and data faults during probe Arthur Korn
2026-11-20 2:52 ` sashiko-bot
2026-11-20 2:47 ` [PATCH v3 1/2] hwmon: (pmbus/max16601) Support byte data writes on VSA rail sashiko-bot
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.