* [PATCH 1/5] arm64: dts: freescale: imx93-11x11-frdm: Enable I2C level shifter
2026-11-20 9:37 [PATCH 0/5] arm64: dts: freescale: Fix i.MX93 FRDM hardware descriptions Freimut Diener
@ 2026-11-20 9:37 ` Freimut Diener
2026-11-20 10:08 ` Joseph Guo (OSS)
2026-11-20 9:37 ` [PATCH 2/5] arm64: dts: freescale: imx93-11x11-frdm-common: Describe PCAL6524 supply Freimut Diener
` (3 subsequent siblings)
4 siblings, 1 reply; 11+ messages in thread
From: Freimut Diener @ 2026-11-20 9:37 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: devicetree, imx, linux-arm-kernel, linux-kernel, kernel,
Freimut Diener, Marco Felsch
Without the PMIC's I2C level translator enabled, probing the GPIO
expander fails with input/output error:
pca953x 0-0020: failed writing register: -5
pca953x 0-0020: probe with driver pca953x failed with error -5
So enable it.
The GPIO expander is connected to the level shifted I2C output of the PMIC.
Suggested-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Freimut Diener <f.diener@pengutronix.de>
---
arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
index 6e8351d120160..fbe3543e1ee8c 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
@@ -49,6 +49,12 @@ pcal6408: gpio@20 {
};
};
+&lpi2c2 {
+ pmic@25 {
+ nxp,i2c-lt-enable;
+ };
+};
+
&mqs1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mqs1>;
--
2.56.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* RE: [PATCH 1/5] arm64: dts: freescale: imx93-11x11-frdm: Enable I2C level shifter
2026-11-20 9:37 ` [PATCH 1/5] arm64: dts: freescale: imx93-11x11-frdm: Enable I2C level shifter Freimut Diener
@ 2026-11-20 10:08 ` Joseph Guo (OSS)
2026-11-20 10:26 ` Freimut Diener
0 siblings, 1 reply; 11+ messages in thread
From: Joseph Guo (OSS) @ 2026-11-20 10:08 UTC (permalink / raw)
To: Freimut Diener, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de, Marco Felsch,
Justin Jiang
NXP Public
> -----Original Message-----
> From: Freimut Diener <f.diener@pengutronix.de>
> Sent: Friday, November 20, 2026 5:37 PM
> To: Rob Herring <robh@kernel.org>; Krzysztof Kozlowski
> <krzk+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>; Frank Li
> <frank.li@nxp.com>; Sascha Hauer <s.hauer@pengutronix.de>; Pengutronix
> Kernel Team <kernel@pengutronix.de>; Fabio Estevam
> <festevam@gmail.com>
> Cc: devicetree@vger.kernel.org; imx@lists.linux.dev; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> kernel@pengutronix.de; Freimut Diener <f.diener@pengutronix.de>; Marco
> Felsch <m.felsch@pengutronix.de>
> Subject: [PATCH 1/5] arm64: dts: freescale: imx93-11x11-frdm: Enable I2C
> level shifter
>
> [You don't often get email from f.diener@pengutronix.de. Learn why this is
> important at https://aka.ms/LearnAboutSenderIdentification ]
>
> Without the PMIC's I2C level translator enabled, probing the GPIO expander
> fails with input/output error:
>
> pca953x 0-0020: failed writing register: -5
> pca953x 0-0020: probe with driver pca953x failed with error -5
>
> So enable it.
>
> The GPIO expander is connected to the level shifted I2C output of the PMIC.
>
> Suggested-by: Marco Felsch <m.felsch@pengutronix.de>
> Signed-off-by: Freimut Diener <f.diener@pengutronix.de>
> ---
> arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> index 6e8351d120160..fbe3543e1ee8c 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> @@ -49,6 +49,12 @@ pcal6408: gpio@20 {
> };
> };
>
> +&lpi2c2 {
> + pmic@25 {
> + nxp,i2c-lt-enable;
> + };
> +};
Hi Freimut,
Can you please move this into imx93-11x11-frdm-common.dtsi?
Regards,
Joseph
> +
> &mqs1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_mqs1>;
>
> --
> 2.56.0
>
^ permalink raw reply [flat|nested] 11+ messages in thread* RE: [PATCH 1/5] arm64: dts: freescale: imx93-11x11-frdm: Enable I2C level shifter
2026-11-20 10:08 ` Joseph Guo (OSS)
@ 2026-11-20 10:26 ` Freimut Diener
0 siblings, 0 replies; 11+ messages in thread
From: Freimut Diener @ 2026-11-20 10:26 UTC (permalink / raw)
To: Joseph Guo (OSS), Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de, Marco Felsch,
Justin Jiang
"Joseph Guo (OSS)" <qijian.guo@oss.nxp.com> writes:
>> --- a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
>> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
>> @@ -49,6 +49,12 @@ pcal6408: gpio@20 {
>> };
>> };
>>
>> +&lpi2c2 {
>> + pmic@25 {
>> + nxp,i2c-lt-enable;
>> + };
>> +};
> [...]
> Can you please move this into imx93-11x11-frdm-common.dtsi?
I don't have access to the i.MX93 Wireless FRDM board.
Are its schematics publicly available?
Have you verified that the I2C level shifter is also present on
the Wireless variant?
I'll move the property into the common .dtsi in v2.
Best,
Freimut
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 2/5] arm64: dts: freescale: imx93-11x11-frdm-common: Describe PCAL6524 supply
2026-11-20 9:37 [PATCH 0/5] arm64: dts: freescale: Fix i.MX93 FRDM hardware descriptions Freimut Diener
2026-11-20 9:37 ` [PATCH 1/5] arm64: dts: freescale: imx93-11x11-frdm: Enable I2C level shifter Freimut Diener
@ 2026-11-20 9:37 ` Freimut Diener
2026-11-20 9:37 ` [PATCH 3/5] arm64: dts: freescale: imx93-11x11-frdm: use 8-bit eMMC bus Freimut Diener
` (2 subsequent siblings)
4 siblings, 0 replies; 11+ messages in thread
From: Freimut Diener @ 2026-11-20 9:37 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: devicetree, imx, linux-arm-kernel, linux-kernel, kernel,
Freimut Diener
The PCAL6524 GPIO expander is powered by the PMIC's BUCK4 regulator.
The PMIC in turn uses the expander as its interrupt controller.
Referencing BUCK4 directly through the expander's vcc-supply
property creates a circular dependency: the expander requires the
PMIC regulator to probe, while the PMIC requires the expander for
its interrupt.
Describe the expander's 3.3 V supply using an always-on fixed
regulator as a proxy for BUCK4. This allows the GPIO expander to
acquire its supply without introducing the dependency cycle and avoid a
respective warning:
pca953x 1-0022: supply vcc not found, using dummy regulator
The proxy does not represent a separate physical regulator.
Signed-off-by: Freimut Diener <f.diener@pengutronix.de>
---
.../boot/dts/freescale/imx93-11x11-frdm-common.dtsi | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi
index 33ed26aafde88..617f2229b559b 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi
@@ -49,6 +49,19 @@ button-k3 {
};
};
+ /*
+ * PCAL6524 is powered by PMIC BUCK4, but the PMIC uses PCAL6524
+ * as its interrupt controller. Model the supply with a fixed
+ * regulator to avoid a circular device dependency.
+ */
+ reg_pcal6524_vcc: regulator-pcal6524-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_PCAL6524";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
off-on-delay-us = <12000>;
@@ -207,8 +220,7 @@ pcal6524: gpio@22 {
gpio-controller;
pinctrl-0 = <&pinctrl_pcal6524>;
pinctrl-names = "default";
- /* does not boot with supplier set, because it is the bucks interrupt parent */
- /* vcc-supply = <&buck4>; */
+ vcc-supply = <®_pcal6524_vcc>;
};
pmic@25 {
--
2.56.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 3/5] arm64: dts: freescale: imx93-11x11-frdm: use 8-bit eMMC bus
2026-11-20 9:37 [PATCH 0/5] arm64: dts: freescale: Fix i.MX93 FRDM hardware descriptions Freimut Diener
2026-11-20 9:37 ` [PATCH 1/5] arm64: dts: freescale: imx93-11x11-frdm: Enable I2C level shifter Freimut Diener
2026-11-20 9:37 ` [PATCH 2/5] arm64: dts: freescale: imx93-11x11-frdm-common: Describe PCAL6524 supply Freimut Diener
@ 2026-11-20 9:37 ` Freimut Diener
2026-11-20 9:43 ` sashiko-bot
2026-11-20 9:50 ` Joseph Guo (OSS)
2026-11-20 9:37 ` [PATCH 4/5] arm64: dts: freescale: imx91-93-common: Add EL2 virtual timer interrupt Freimut Diener
2026-11-20 9:37 ` [PATCH 5/5] arm64: dts: freescale: imx93-11x11-frdm-common: Describe USB2 VBUS supply Freimut Diener
4 siblings, 2 replies; 11+ messages in thread
From: Freimut Diener @ 2026-11-20 9:37 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: devicetree, imx, linux-arm-kernel, linux-kernel, kernel,
Freimut Diener
The FRDM-i.MX93 eMMC connected to USDHC3 uses an 8-bit data bus.
Correct the bus width to allow HS400 operation.
Verified on an FRDM-i.MX93 board. With the corrected bus width,
the eMMC operates in HS400 Enhanced Strobe mode at 200 MHz.
This also avoids a respective warning:
sdhci-esdhc-imx 428b0000.mmc: drop HS400 support since no 8-bit bus
Signed-off-by: Freimut Diener <f.diener@pengutronix.de>
---
arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
index fbe3543e1ee8c..af674f3f48364 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
@@ -75,7 +75,7 @@ &sai1 {
};
&usdhc3 {
- bus-width = <4>;
+ bus-width = <8>;
keep-power-in-suspend;
mmc-pwrseq = <&usdhc3_pwrseq>;
non-removable;
--
2.56.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH 3/5] arm64: dts: freescale: imx93-11x11-frdm: use 8-bit eMMC bus
2026-11-20 9:37 ` [PATCH 3/5] arm64: dts: freescale: imx93-11x11-frdm: use 8-bit eMMC bus Freimut Diener
@ 2026-11-20 9:43 ` sashiko-bot
2026-11-20 9:50 ` Joseph Guo (OSS)
1 sibling, 0 replies; 11+ messages in thread
From: sashiko-bot @ 2026-11-20 9:43 UTC (permalink / raw)
To: Freimut Diener; +Cc: devicetree, imx, robh, conor+dt, Frank.Li
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Medium] arm64: dts: freescale: imx93-11x11-frdm sets 8-bit bus-width
on 4-bit usdhc3
--
commit 1b60016bb1be48a6e2b6b1dfc5d19ef5de2490d6
Author: Freimut Diener <f.diener@pengutronix.de>
arm64: dts: freescale: imx93-11x11-frdm: use 8-bit eMMC bus
This commit changes the bus-width property of the usdhc3 node in
imx93-11x11-frdm.dts from 4 to 8.
> diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> index fbe3543e1ee8c..af674f3f48364 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> @@ -75,7 +75,7 @@ &sai1 {
> };
>
> &usdhc3 {
> - bus-width = <4>;
> + bus-width = <8>;
> keep-power-in-suspend;
> mmc-pwrseq = <&usdhc3_pwrseq>;
> non-removable;
[Severity: Medium]
Should usdhc3 really have an 8-bit bus width here?
On the FRDM-i.MX93, the 8-bit eMMC is connected to usdhc1, which already
has bus-width = <8> in
arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi. usdhc3
(428b0000.mmc) is connected to the 4-bit Wi-Fi SDIO interface of the
IW612 module, and both pinctrl_usdhc3 and the i.MX93 SoC itself
(arch/arm64/boot/dts/freescale/imx93-pinfunc.h) only have four data lines
(USDHC3_DATA0 through USDHC3_DATA3).
428b0000.mmc logs the HS400 warning in mmc_validate_host_caps() because
usdhc3 is missing the no-mmc property (unlike usdhc2 in
imx93-11x11-frdm-common.dtsi). Keeping bus-width = <4> and adding no-mmc
(and no-sd) on usdhc3 would match the hardware and avoid the warning.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261120-imx93-frdm-fixes-v1-0-78dde22a56fe@pengutronix.de?part=3
^ permalink raw reply [flat|nested] 11+ messages in thread* RE: [PATCH 3/5] arm64: dts: freescale: imx93-11x11-frdm: use 8-bit eMMC bus
2026-11-20 9:37 ` [PATCH 3/5] arm64: dts: freescale: imx93-11x11-frdm: use 8-bit eMMC bus Freimut Diener
2026-11-20 9:43 ` sashiko-bot
@ 2026-11-20 9:50 ` Joseph Guo (OSS)
2026-11-20 10:14 ` Freimut Diener
1 sibling, 1 reply; 11+ messages in thread
From: Joseph Guo (OSS) @ 2026-11-20 9:50 UTC (permalink / raw)
To: Freimut Diener, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de
NXP Confidential
> -----Original Message-----
> From: Freimut Diener <f.diener@pengutronix.de>
> Sent: Friday, November 20, 2026 5:37 PM
> To: Rob Herring <robh@kernel.org>; Krzysztof Kozlowski
> <krzk+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>; Frank Li
> <frank.li@nxp.com>; Sascha Hauer <s.hauer@pengutronix.de>; Pengutronix
> Kernel Team <kernel@pengutronix.de>; Fabio Estevam
> <festevam@gmail.com>
> Cc: devicetree@vger.kernel.org; imx@lists.linux.dev; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> kernel@pengutronix.de; Freimut Diener <f.diener@pengutronix.de>
> Subject: [PATCH 3/5] arm64: dts: freescale: imx93-11x11-frdm: use 8-bit
> eMMC bus
>
> [You don't often get email from f.diener@pengutronix.de. Learn why this is
> important at https://aka.ms/LearnAboutSenderIdentification ]
>
> The FRDM-i.MX93 eMMC connected to USDHC3 uses an 8-bit data bus.
> Correct the bus width to allow HS400 operation.
>
> Verified on an FRDM-i.MX93 board. With the corrected bus width, the eMMC
> operates in HS400 Enhanced Strobe mode at 200 MHz.
>
> This also avoids a respective warning:
>
> sdhci-esdhc-imx 428b0000.mmc: drop HS400 support since no 8-bit bus
>
> Signed-off-by: Freimut Diener <f.diener@pengutronix.de>
> ---
> arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> index fbe3543e1ee8c..af674f3f48364 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts
> @@ -75,7 +75,7 @@ &sai1 {
> };
>
> &usdhc3 {
> - bus-width = <4>;
> + bus-width = <8>;
> keep-power-in-suspend;
> mmc-pwrseq = <&usdhc3_pwrseq>;
> non-removable;
>
Hi Freimut,
The usdhc3 connect to SDIO wifi module not eMMC. Are you sure you test it with exactly patch?
Regards,
Joseph
> --
> 2.56.0
>
^ permalink raw reply [flat|nested] 11+ messages in thread* RE: [PATCH 3/5] arm64: dts: freescale: imx93-11x11-frdm: use 8-bit eMMC bus
2026-11-20 9:50 ` Joseph Guo (OSS)
@ 2026-11-20 10:14 ` Freimut Diener
0 siblings, 0 replies; 11+ messages in thread
From: Freimut Diener @ 2026-11-20 10:14 UTC (permalink / raw)
To: Joseph Guo (OSS), Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Frank Li, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de
"Joseph Guo (OSS)" <qijian.guo@oss.nxp.com> writes:
> The usdhc3 connect to SDIO wifi module not eMMC. Are you sure you test it with exactly patch?
Yes, you (and Sashiko) are right in that usdhc3 is not the eMMC. It
actually is the M.2 slot connected to the wifi module and it has 4 data
lines.
The fix proposed by Sashiko is appropriate in my opinion (adding the
no-sd and no-mmc properties to usdhc3) to properly describe the hardware
and also remove the warning.
I tested that in the frdm-imx93 and will update the patch accordingly.
Best,
Freimut
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 4/5] arm64: dts: freescale: imx91-93-common: Add EL2 virtual timer interrupt
2026-11-20 9:37 [PATCH 0/5] arm64: dts: freescale: Fix i.MX93 FRDM hardware descriptions Freimut Diener
` (2 preceding siblings ...)
2026-11-20 9:37 ` [PATCH 3/5] arm64: dts: freescale: imx93-11x11-frdm: use 8-bit eMMC bus Freimut Diener
@ 2026-11-20 9:37 ` Freimut Diener
2026-11-20 9:37 ` [PATCH 5/5] arm64: dts: freescale: imx93-11x11-frdm-common: Describe USB2 VBUS supply Freimut Diener
4 siblings, 0 replies; 11+ messages in thread
From: Freimut Diener @ 2026-11-20 9:37 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: devicetree, imx, linux-arm-kernel, linux-kernel, kernel,
Freimut Diener
The Cortex-A55 CPUs in the i.MX91 and i.MX93 SoCs support Virtual Host
Extensions (VHE). When running at EL2 with VHE enabled, Linux prefers
the EL2 virtual timer over the EL2 physical timer.
The timer node in imx91_93_common.dtsi only describes four architected
timer interrupts, omitting the EL2 virtual timer interrupt. As a result,
Linux reports:
[Firmware Bug]: VHE-capable CPU without EL2 virtual timer interrupt
and falls back to the EL2 physical timer.
Add the missing EL2 virtual timer interrupt (PPI 12) to allow Linux to
use the EL2 virtual timer.
Tested on an NXP FRDM-i.MX93 board. Linux selects the EL2 virtual
timer (hyp-virt), and interrupt counts increase on both CPUs. Timer
operation was also verified across CPU idle transitions.
Signed-off-by: Freimut Diener <f.diener@pengutronix.de>
---
While this change fixes a real bug for me, this same change was already
previously proposed by Marc Zyngier <maz@kernel.org> in May as part of a
larger series.
Link: https://lore.kernel.org/all/20260523140242.586031-10-maz@kernel.org/
---
arch/arm64/boot/dts/freescale/imx91_93_common.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
index a68ffd04ee084..af4c93c128d31 100644
--- a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
@@ -82,7 +82,8 @@ timer {
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
clock-frequency = <24000000>;
arm,no-tick-in-suspend;
interrupt-parent = <&gic>;
--
2.56.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 5/5] arm64: dts: freescale: imx93-11x11-frdm-common: Describe USB2 VBUS supply
2026-11-20 9:37 [PATCH 0/5] arm64: dts: freescale: Fix i.MX93 FRDM hardware descriptions Freimut Diener
` (3 preceding siblings ...)
2026-11-20 9:37 ` [PATCH 4/5] arm64: dts: freescale: imx91-93-common: Add EL2 virtual timer interrupt Freimut Diener
@ 2026-11-20 9:37 ` Freimut Diener
4 siblings, 0 replies; 11+ messages in thread
From: Freimut Diener @ 2026-11-20 9:37 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Frank Li,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: devicetree, imx, linux-arm-kernel, linux-kernel, kernel,
Freimut Diener
The FRDM-i.MX93 USB2 Type-A host port receives its 5 V VBUS supply
through an SGM2526 load switch. The switch's enable input is tied to
the always-on VDD_3V3 rail, keeping VBUS enabled whenever the board
is powered.
Describe the switch output as an always-on fixed regulator and
reference it from the USB2 PHY's vbus-supply property.
This provides the PHY with its actual VBUS supply instead of
falling back to a dummy regulator, which else triggers a warning:
usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests (id=vbus)
Signed-off-by: Freimut Diener <f.diener@pengutronix.de>
---
arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi
index 617f2229b559b..eed435f6f87a7 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-frdm-common.dtsi
@@ -62,6 +62,14 @@ reg_pcal6524_vcc: regulator-pcal6524-vcc {
regulator-always-on;
};
+ reg_usb2_vbus: regulator-usb2-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
off-on-delay-us = <12000>;
@@ -398,6 +406,10 @@ &usbotg2 {
status = "okay";
};
+&usbphynop2 {
+ vbus-supply = <®_usb2_vbus>;
+};
+
&usdhc1 {
bus-width = <8>;
non-removable;
--
2.56.0
^ permalink raw reply related [flat|nested] 11+ messages in thread