* [PATCH 0/8] ARM: dts: rockchip: Add Luckfox Lyra boards @ 2026-11-19 15:20 ` Jonas Karlman 0 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman This series adds initial devicetree for Rockchip RK3506 SoC and initial support for Luckfox Lyra board family [1]. The Luckfox Lyra board family use different RK3506 SoC variants, i.e. Lyra and Lyra Plus both use RK3506G2 and Lyra Ultra and Lyra Zero W both use the RK3506B varaiant. All board compatibles use rockchip,rk3506 in this revision of the series, maybe we should use rockchip,rk3506b for the RK3506B (and RK3506J) variants? The pinctrl driver for RK3506 will not work as-is using the SoC DT from this series. The already merged driver depends on a rockchip,ioc1 phandle prop that never was described in dt-bindings. The SoC DT in this series instead uses rockchip,grf in GPIO controller node to reference correct IOC for GPIO0 and GPIO1. The branch at [2] contains follow-up patches that e.g. fixes pinctrl driver and adds USB support. Mainline U-Boot support can be tested using a branch at [3], it contains board support using same devicetree files extended with USB support. [1] https://wiki.luckfox.com/Luckfox-Lyra [2] https://github.com/Kwiboo/linux-rockchip/commits/next-20261116-rk3506 [3] https://git.u-boot-project.org/u-boot/contributors/kwiboo/u-boot/-/commits/rk3506 Jonas Karlman (8): dt-bindings: soc: rockchip: grf: Add RK3506 compatibles ARM: dts: rockchip: Add support for RK3506 dt-bindings: arm: rockchip: Add Luckfox Lyra and Lyra Plus ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards dt-bindings: arm: rockchip: Add Luckfox Lyra Ultra ARM: dts: rockchip: Add Luckfox Lyra Ultra board dt-bindings: arm: rockchip: Add Luckfox Lyra Zero W ARM: dts: rockchip: Add Luckfox Lyra Zero W board .../devicetree/bindings/arm/rockchip.yaml | 9 + .../devicetree/bindings/soc/rockchip/grf.yaml | 6 + arch/arm/boot/dts/rockchip/Makefile | 6 +- .../dts/rockchip/rk3506-luckfox-lyra-plus.dts | 31 + .../boot/dts/rockchip/rk3506-luckfox-lyra.dts | 9 + .../dts/rockchip/rk3506-luckfox-lyra.dtsi | 124 ++++ .../arm/boot/dts/rockchip/rk3506-pinctrl.dtsi | 576 ++++++++++++++++++ arch/arm/boot/dts/rockchip/rk3506.dtsi | 540 ++++++++++++++++ .../rockchip/rk3506b-luckfox-lyra-ultra.dts | 31 + .../rockchip/rk3506b-luckfox-lyra-zero-w.dts | 23 + .../dts/rockchip/rk3506b-luckfox-lyra.dtsi | 100 +++ 11 files changed, 1454 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi create mode 100644 arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/rockchip/rk3506.dtsi create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi -- 2.56.1 ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 0/8] ARM: dts: rockchip: Add Luckfox Lyra boards @ 2026-11-19 15:20 ` Jonas Karlman 0 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman This series adds initial devicetree for Rockchip RK3506 SoC and initial support for Luckfox Lyra board family [1]. The Luckfox Lyra board family use different RK3506 SoC variants, i.e. Lyra and Lyra Plus both use RK3506G2 and Lyra Ultra and Lyra Zero W both use the RK3506B varaiant. All board compatibles use rockchip,rk3506 in this revision of the series, maybe we should use rockchip,rk3506b for the RK3506B (and RK3506J) variants? The pinctrl driver for RK3506 will not work as-is using the SoC DT from this series. The already merged driver depends on a rockchip,ioc1 phandle prop that never was described in dt-bindings. The SoC DT in this series instead uses rockchip,grf in GPIO controller node to reference correct IOC for GPIO0 and GPIO1. The branch at [2] contains follow-up patches that e.g. fixes pinctrl driver and adds USB support. Mainline U-Boot support can be tested using a branch at [3], it contains board support using same devicetree files extended with USB support. [1] https://wiki.luckfox.com/Luckfox-Lyra [2] https://github.com/Kwiboo/linux-rockchip/commits/next-20261116-rk3506 [3] https://git.u-boot-project.org/u-boot/contributors/kwiboo/u-boot/-/commits/rk3506 Jonas Karlman (8): dt-bindings: soc: rockchip: grf: Add RK3506 compatibles ARM: dts: rockchip: Add support for RK3506 dt-bindings: arm: rockchip: Add Luckfox Lyra and Lyra Plus ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards dt-bindings: arm: rockchip: Add Luckfox Lyra Ultra ARM: dts: rockchip: Add Luckfox Lyra Ultra board dt-bindings: arm: rockchip: Add Luckfox Lyra Zero W ARM: dts: rockchip: Add Luckfox Lyra Zero W board .../devicetree/bindings/arm/rockchip.yaml | 9 + .../devicetree/bindings/soc/rockchip/grf.yaml | 6 + arch/arm/boot/dts/rockchip/Makefile | 6 +- .../dts/rockchip/rk3506-luckfox-lyra-plus.dts | 31 + .../boot/dts/rockchip/rk3506-luckfox-lyra.dts | 9 + .../dts/rockchip/rk3506-luckfox-lyra.dtsi | 124 ++++ .../arm/boot/dts/rockchip/rk3506-pinctrl.dtsi | 576 ++++++++++++++++++ arch/arm/boot/dts/rockchip/rk3506.dtsi | 540 ++++++++++++++++ .../rockchip/rk3506b-luckfox-lyra-ultra.dts | 31 + .../rockchip/rk3506b-luckfox-lyra-zero-w.dts | 23 + .../dts/rockchip/rk3506b-luckfox-lyra.dtsi | 100 +++ 11 files changed, 1454 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi create mode 100644 arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/rockchip/rk3506.dtsi create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi -- 2.56.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 1/8] dt-bindings: soc: rockchip: grf: Add RK3506 compatibles 2026-11-19 15:20 ` Jonas Karlman @ 2026-11-19 15:20 ` Jonas Karlman -1 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Add the GRF and IOC compatible strings for the Rockchip RK3506 SoC. Table 1-1 RK3506 Address Mapping in TRM for RK3506 contains following related entries: Module Address Size GRF 0xFF288000 16KB GPIO2/3/4_IOC 0xFF4D8000 32KB GPIO1_IOC 0xFF660000 64KB GRF_CORE 0xFF840000 16KB GRF_PMU/RMIO 0xFF910000 16KB GPIO0_IOC 0xFF950000 64KB Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index e94c83d7c138..3c1c3dc1b84d 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -15,6 +15,9 @@ properties: - items: - enum: - rockchip,rk3288-sgrf + - rockchip,rk3506-ioc0 + - rockchip,rk3506-ioc1 + - rockchip,rk3506-ioc234 - rockchip,rk3528-ioc-grf - rockchip,rk3528-pipe-phy-grf - rockchip,rk3528-vo-grf @@ -93,6 +96,9 @@ properties: - rockchip,rk3368-pmugrf - rockchip,rk3399-grf - rockchip,rk3399-pmugrf + - rockchip,rk3506-core-grf + - rockchip,rk3506-grf + - rockchip,rk3506-pmu-grf - rockchip,rk3562-pmu-grf - rockchip,rk3568-grf - rockchip,rk3568-pmugrf -- 2.56.1 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 1/8] dt-bindings: soc: rockchip: grf: Add RK3506 compatibles @ 2026-11-19 15:20 ` Jonas Karlman 0 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Add the GRF and IOC compatible strings for the Rockchip RK3506 SoC. Table 1-1 RK3506 Address Mapping in TRM for RK3506 contains following related entries: Module Address Size GRF 0xFF288000 16KB GPIO2/3/4_IOC 0xFF4D8000 32KB GPIO1_IOC 0xFF660000 64KB GRF_CORE 0xFF840000 16KB GRF_PMU/RMIO 0xFF910000 16KB GPIO0_IOC 0xFF950000 64KB Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- Documentation/devicetree/bindings/soc/rockchip/grf.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index e94c83d7c138..3c1c3dc1b84d 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -15,6 +15,9 @@ properties: - items: - enum: - rockchip,rk3288-sgrf + - rockchip,rk3506-ioc0 + - rockchip,rk3506-ioc1 + - rockchip,rk3506-ioc234 - rockchip,rk3528-ioc-grf - rockchip,rk3528-pipe-phy-grf - rockchip,rk3528-vo-grf @@ -93,6 +96,9 @@ properties: - rockchip,rk3368-pmugrf - rockchip,rk3399-grf - rockchip,rk3399-pmugrf + - rockchip,rk3506-core-grf + - rockchip,rk3506-grf + - rockchip,rk3506-pmu-grf - rockchip,rk3562-pmu-grf - rockchip,rk3568-grf - rockchip,rk3568-pmugrf -- 2.56.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 2/8] ARM: dts: rockchip: Add support for RK3506 2026-11-19 15:20 ` Jonas Karlman @ 2026-11-19 15:20 ` Jonas Karlman -1 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Richard Cochran Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman, netdev Add the initial devicetree for Rockchip RK3506 SoC. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- .../arm/boot/dts/rockchip/rk3506-pinctrl.dtsi | 576 ++++++++++++++++++ arch/arm/boot/dts/rockchip/rk3506.dtsi | 540 ++++++++++++++++ 2 files changed, 1116 insertions(+) create mode 100644 arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/rockchip/rk3506.dtsi diff --git a/arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi b/arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi new file mode 100644 index 000000000000..47f2962040d2 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi @@ -0,0 +1,576 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/pinctrl/rockchip.h> +#include <arm64/rockchip/rockchip-pinconf.dtsi> + +&pinctrl { + aupll-clk { + /omit-if-no-ref/ + aupll_clk_in: aupll-clk-in { + rockchip,pins = + /* aupll_clk_in */ + <0 RK_PC4 2 &pcfg_pull_none>; + }; + }; + + cpu { + /omit-if-no-ref/ + cpu_avs: cpu-avs { + rockchip,pins = + /* cpu_avs */ + <0 RK_PC5 1 &pcfg_pull_none>; + }; + }; + + eth-clk0-25m { + /omit-if-no-ref/ + eth_clk0_25m_out: eth-clk0-25m-out { + rockchip,pins = + /* eth_clk0_25m_out */ + <0 RK_PC4 1 &pcfg_pull_none>; + }; + }; + + eth-clk1-25m { + /omit-if-no-ref/ + eth_clk1_25m_out: eth-clk1-25m-out { + rockchip,pins = + /* eth_clk1_25m_out */ + <0 RK_PC3 1 &pcfg_pull_none>; + }; + }; + + eth-rmii0 { + /omit-if-no-ref/ + eth_rmii0_clk: eth-rmii0-clk { + rockchip,pins = + /* eth_rmii0_clk */ + <2 RK_PB2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + eth_rmii0_miim: eth-rmii0-miim { + rockchip,pins = + /* eth_rmii0_mdc */ + <2 RK_PB6 1 &pcfg_pull_none>, + /* eth_rmii0_mdio */ + <2 RK_PB7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + eth_rmii0_rx_bus2: eth-rmii0-rx-bus2 { + rockchip,pins = + /* eth_rmii0_rxd0 */ + <2 RK_PB0 1 &pcfg_pull_none>, + /* eth_rmii0_rxd1 */ + <2 RK_PB1 1 &pcfg_pull_none>, + /* eth_rmii0_rxdvcrs */ + <2 RK_PC0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + eth_rmii0_tx_bus2: eth-rmii0-tx-bus2 { + rockchip,pins = + /* eth_rmii0_txd0 */ + <2 RK_PB3 1 &pcfg_pull_none>, + /* eth_rmii0_txd1 */ + <2 RK_PB4 1 &pcfg_pull_none>, + /* eth_rmii0_txen */ + <2 RK_PB5 1 &pcfg_pull_none>; + }; + }; + + eth-rmii1 { + /omit-if-no-ref/ + eth_rmii1_clk: eth-rmii1-clk { + rockchip,pins = + /* eth_rmii1_clk */ + <3 RK_PB0 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + eth_rmii1_miim: eth-rmii1-miim { + rockchip,pins = + /* eth_rmii1_mdc */ + <3 RK_PB4 2 &pcfg_pull_none>, + /* eth_rmii1_mdio */ + <3 RK_PB5 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + eth_rmii1_rx_bus2: eth-rmii1-rx-bus2 { + rockchip,pins = + /* eth_rmii1_rxd0 */ + <3 RK_PA6 2 &pcfg_pull_none>, + /* eth_rmii1_rxd1 */ + <3 RK_PA7 2 &pcfg_pull_none>, + /* eth_rmii1_rxdvcrs */ + <3 RK_PB6 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + eth_rmii1_tx_bus2: eth-rmii1-tx-bus2 { + rockchip,pins = + /* eth_rmii1_txd0 */ + <3 RK_PB1 2 &pcfg_pull_none>, + /* eth_rmii1_txd1 */ + <3 RK_PB2 2 &pcfg_pull_none>, + /* eth_rmii1_txen */ + <3 RK_PB3 2 &pcfg_pull_none>; + }; + }; + + fspi { + /omit-if-no-ref/ + fspi_bus4: fspi-bus4 { + rockchip,pins = + /* fspi_d0 */ + <2 RK_PA2 1 &pcfg_pull_none>, + /* fspi_d1 */ + <2 RK_PA3 1 &pcfg_pull_none>, + /* fspi_d2 */ + <2 RK_PA4 1 &pcfg_pull_none>, + /* fspi_d3 */ + <2 RK_PA5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + fspi_clk: fspi-clk { + rockchip,pins = + /* fspi_clk */ + <2 RK_PA1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + fspi_csn: fspi-csn { + rockchip,pins = + /* fspi_csn */ + <2 RK_PA0 1 &pcfg_pull_none>; + }; + }; + + jtag { + /omit-if-no-ref/ + jtagm0: jtagm0 { + rockchip,pins = + /* jtag_tck_m0 */ + <3 RK_PA4 2 &pcfg_pull_none>, + /* jtag_tms_m0 */ + <3 RK_PA5 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + jtagm1: jtagm1 { + rockchip,pins = + /* jtag_tck_m1 */ + <0 RK_PC6 2 &pcfg_pull_none>, + /* jtag_tms_m1 */ + <0 RK_PC7 2 &pcfg_pull_none>; + }; + }; + + ref-clk1 { + /omit-if-no-ref/ + ref_clk1_out: ref-clk1-out { + rockchip,pins = + /* ref_clk1_out */ + <0 RK_PC2 1 &pcfg_pull_none>; + }; + }; + + sai0 { + /omit-if-no-ref/ + sai0_lrck: sai0-lrck { + rockchip,pins = + /* sai0_lrck */ + <0 RK_PA0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_mclk: sai0-mclk { + rockchip,pins = + /* sai0_mclk */ + <0 RK_PA2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_sclk: sai0-sclk { + rockchip,pins = + /* sai0_sclk */ + <0 RK_PA1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_sdi0: sai0-sdi0 { + rockchip,pins = + /* sai0_sdi0 */ + <0 RK_PA4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_sdi1: sai0-sdi1 { + rockchip,pins = + /* sai0_sdi1 */ + <0 RK_PA5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_sdi2: sai0-sdi2 { + rockchip,pins = + /* sai0_sdi2 */ + <0 RK_PA6 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_sdi3: sai0-sdi3 { + rockchip,pins = + /* sai0_sdi3 */ + <0 RK_PA7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_sdo: sai0-sdo { + rockchip,pins = + /* sai0_sdo */ + <0 RK_PA3 1 &pcfg_pull_none>; + }; + }; + + sai1 { + /omit-if-no-ref/ + sai1_lrck: sai1-lrck { + rockchip,pins = + /* sai1_lrck */ + <0 RK_PB2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_mclk: sai1-mclk { + rockchip,pins = + /* sai1_mclk */ + <0 RK_PB0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_sclk: sai1-sclk { + rockchip,pins = + /* sai1_sclk */ + <0 RK_PB1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_sdi: sai1-sdi { + rockchip,pins = + /* sai1_sdi */ + <0 RK_PB3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_sdo0: sai1-sdo0 { + rockchip,pins = + /* sai1_sdo0 */ + <0 RK_PB4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_sdo1: sai1-sdo1 { + rockchip,pins = + /* sai1_sdo1 */ + <0 RK_PB5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_sdo2: sai1-sdo2 { + rockchip,pins = + /* sai1_sdo2 */ + <0 RK_PB6 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_sdo3: sai1-sdo3 { + rockchip,pins = + /* sai1_sdo3 */ + <0 RK_PB7 1 &pcfg_pull_none>; + }; + }; + + sai2 { + /omit-if-no-ref/ + sai2m0_lrck: sai2m0-lrck { + rockchip,pins = + /* sai2_lrck_m0 */ + <3 RK_PB1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m0_mclk: sai2m0-mclk { + rockchip,pins = + /* sai2_mclk_m0 */ + <3 RK_PB6 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m0_sclk: sai2m0-sclk { + rockchip,pins = + /* sai2_sclk_m0 */ + <3 RK_PA7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m0_sdi: sai2m0-sdi { + rockchip,pins = + /* sai2m0_sdi */ + <3 RK_PA6 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m0_sdo: sai2m0-sdo { + rockchip,pins = + /* sai2m0_sdo */ + <3 RK_PB0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m1_lrck: sai2m1-lrck { + rockchip,pins = + /* sai2_lrck_m1 */ + <1 RK_PB3 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m1_mclk: sai2m1-mclk { + rockchip,pins = + /* sai2_mclk_m1 */ + <1 RK_PC1 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m1_sclk: sai2m1-sclk { + rockchip,pins = + /* sai2_sclk_m1 */ + <1 RK_PB2 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m1_sdi: sai2m1-sdi { + rockchip,pins = + /* sai2m1_sdi */ + <1 RK_PC2 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m1_sdo: sai2m1-sdo { + rockchip,pins = + /* sai2m1_sdo */ + <1 RK_PC3 6 &pcfg_pull_none>; + }; + }; + + sai3 { + /omit-if-no-ref/ + sai3_lrck: sai3-lrck { + rockchip,pins = + /* sai3_lrck */ + <2 RK_PB5 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai3_mclk: sai3-mclk { + rockchip,pins = + /* sai3_mclk */ + <2 RK_PC0 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai3_sclk: sai3-sclk { + rockchip,pins = + /* sai3_sclk */ + <2 RK_PB4 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai3_sdi: sai3-sdi { + rockchip,pins = + /* sai3_sdi */ + <2 RK_PB6 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai3_sdo: sai3-sdo { + rockchip,pins = + /* sai3_sdo */ + <2 RK_PB7 3 &pcfg_pull_none>; + }; + }; + + sdmmc { + /omit-if-no-ref/ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + /* sdmmc_d0 */ + <3 RK_PA2 1 &pcfg_pull_up>, + /* sdmmc_d1 */ + <3 RK_PA3 1 &pcfg_pull_up>, + /* sdmmc_d2 */ + <3 RK_PA4 1 &pcfg_pull_up>, + /* sdmmc_d3 */ + <3 RK_PA5 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + sdmmc_clk: sdmmc-clk { + rockchip,pins = + /* sdmmc_clk */ + <3 RK_PA0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + /* sdmmc_cmd */ + <3 RK_PA1 1 &pcfg_pull_up>; + }; + }; + + spi0 { + /omit-if-no-ref/ + spi0_clk: spi0-clk { + rockchip,pins = + /* spi0_clk */ + <0 RK_PC0 2 &pcfg_pull_none_drv_level_3>, + /* spi0_miso */ + <0 RK_PC2 2 &pcfg_pull_none_drv_level_3>, + /* spi0_mosi */ + <0 RK_PC1 2 &pcfg_pull_none_drv_level_3>; + }; + + /omit-if-no-ref/ + spi0_csn0: spi0-csn0 { + rockchip,pins = + /* spi0_csn0 */ + <0 RK_PC3 2 &pcfg_pull_none_drv_level_3>; + }; + + /omit-if-no-ref/ + spi0_csn1: spi0-csn1 { + rockchip,pins = + /* spi0_csn1 */ + <0 RK_PB7 2 &pcfg_pull_none_drv_level_3>; + }; + }; + + spi1 { + /omit-if-no-ref/ + spi1_clk: spi1-clk { + rockchip,pins = + /* spi1_clk */ + <0 RK_PB0 2 &pcfg_pull_none_drv_level_3>, + /* spi1_miso */ + <0 RK_PB2 2 &pcfg_pull_none_drv_level_3>, + /* spi1_mosi */ + <0 RK_PB1 2 &pcfg_pull_none_drv_level_3>; + }; + + /omit-if-no-ref/ + spi1_csn0: spi1-csn0 { + rockchip,pins = + /* spi1_csn0 */ + <0 RK_PB6 2 &pcfg_pull_none_drv_level_3>; + }; + + /omit-if-no-ref/ + spi1_csn1: spi1-csn1 { + rockchip,pins = + /* spi1_csn1 */ + <0 RK_PA7 2 &pcfg_pull_none_drv_level_3>; + }; + }; + + spi2 { + /omit-if-no-ref/ + spi2_clk: spi2-clk { + rockchip,pins = + /* spi2_clk */ + <2 RK_PB0 2 &pcfg_pull_none>, + /* spi2_miso */ + <2 RK_PB3 2 &pcfg_pull_none>, + /* spi2_mosi */ + <2 RK_PB2 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi2_csn: spi2-csn { + rockchip,pins = + /* spi2_csn */ + <2 RK_PB1 2 &pcfg_pull_none>; + }; + }; + + test-clk { + /omit-if-no-ref/ + test_clk_out: test-clk-out { + rockchip,pins = + /* test_clk_out */ + <3 RK_PA3 2 &pcfg_pull_none>; + }; + }; + + uart0 { + /omit-if-no-ref/ + uart0_xfer: uart0-xfer { + rockchip,pins = + /* uart0_rx */ + <0 RK_PC7 1 &pcfg_pull_up>, + /* uart0_tx */ + <0 RK_PC6 1 &pcfg_pull_up>; + }; + }; + + uart5 { + /omit-if-no-ref/ + uart5m0_ctsn: uart5m0-ctsn { + rockchip,pins = + /* uart5m0_ctsn */ + <3 RK_PB2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m0_rtsn: uart5m0-rtsn { + rockchip,pins = + /* uart5m0_rtsn */ + <3 RK_PB5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m0_xfer: uart5m0-xfer { + rockchip,pins = + /* uart5_rx_m0 */ + <3 RK_PB3 1 &pcfg_pull_up>, + /* uart5_tx_m0 */ + <3 RK_PB4 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart5m1_ctsn: uart5m1-ctsn { + rockchip,pins = + /* uart5m1_ctsn */ + <1 RK_PB1 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m1_rtsn: uart5m1-rtsn { + rockchip,pins = + /* uart5m1_rtsn */ + <1 RK_PD1 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m1_xfer: uart5m1-xfer { + rockchip,pins = + /* uart5_rx_m1 */ + <1 RK_PD3 6 &pcfg_pull_up>, + /* uart5_tx_m1 */ + <1 RK_PD2 6 &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rockchip/rk3506.dtsi b/arch/arm/boot/dts/rockchip/rk3506.dtsi new file mode 100644 index 000000000000..d8e942e6d0b1 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506.dtsi @@ -0,0 +1,540 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/clock/rockchip,rk3506-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/rockchip,rk3506-cru.h> + +/ { + compatible = "rockchip,rk3506"; + + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + }; + + xin24m: clock-xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + }; + }; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + }; + + cpu1: cpu@f01 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + }; + + cpu2: cpu@f02 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf02>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + }; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3506-pinctrl"; + rockchip,grf = <&gpio234_ioc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio@ff940000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff940000 0x200>; + clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + rockchip,grf = <&gpio0_ioc>; + }; + + gpio1: gpio@ff870000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff870000 0x200>; + clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + rockchip,grf = <&gpio1_ioc>; + }; + + gpio2: gpio@ff1c0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff1c0000 0x200>; + clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@ff1d0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff1d0000 0x200>; + clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@ff1e0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff1e0000 0x200>; + clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmu-a7 { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv7-timer"; + clock-frequency = <24000000>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dmac0: dma-controller@ff000000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff000000 0x4000>; + clocks = <&cru ACLK_DMAC0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + }; + + dmac1: dma-controller@ff008000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff008000 0x4000>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + }; + + i2c0: i2c@ff040000 { + compatible = "rockchip,rk3506-i2c", + "rockchip,rk3399-i2c"; + reg = <0xff040000 0x1000>; + clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@ff050000 { + compatible = "rockchip,rk3506-i2c", + "rockchip,rk3399-i2c"; + reg = <0xff050000 0x1000>; + clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff060000 { + compatible = "rockchip,rk3506-i2c", + "rockchip,rk3399-i2c"; + reg = <0xff060000 0x1000>; + clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@ff0a0000 { + compatible = "rockchip,rk3506-uart", "snps,dw-apb-uart"; + reg = <0xff0a0000 0x100>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 4>, <&dmac0 5>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart1: serial@ff0b0000 { + compatible = "rockchip,rk3506-uart", "snps,dw-apb-uart"; + reg = <0xff0b0000 0x100>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 6>, <&dmac0 7>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: serial@ff0c0000 { + compatible = "rockchip,rk3506-uart", "snps,dw-apb-uart"; + reg = <0xff0c0000 0x100>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 8>, <&dmac0 9>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: serial@ff0d0000 { + compatible = "rockchip,rk3506-uart", "snps,dw-apb-uart"; + reg = <0xff0d0000 0x100>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 10>, <&dmac0 11>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: serial@ff0e0000 { + compatible = "rockchip,rk3506-uart", "snps,dw-apb-uart"; + reg = <0xff0e0000 0x100>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac1 12>, <&dmac1 13>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + spi0: spi@ff120000 { + compatible = "rockchip,rk3506-spi", + "rockchip,rk3066-spi"; + reg = <0xff120000 0x1000>; + clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_csn0>, <&spi0_csn1>, <&spi0_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff130000 { + compatible = "rockchip,rk3506-spi", + "rockchip,rk3066-spi"; + reg = <0xff130000 0x1000>; + clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_csn0>, <&spi1_csn1>, <&spi1_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt0: watchdog@ff260000 { + compatible = "rockchip,rk3506-wdt", "snps,dw-wdt"; + reg = <0xff260000 0x100>; + clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>; + clock-names = "tclk", "pclk"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + wdt1: watchdog@ff268000 { + compatible = "rockchip,rk3506-wdt", "snps,dw-wdt"; + reg = <0xff268000 0x100>; + clocks = <&cru TCLK_WDT1>, <&cru PCLK_WDT1>; + clock-names = "tclk", "pclk"; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + grf: syscon@ff288000 { + compatible = "rockchip,rk3506-grf", "syscon", + "simple-mfd"; + reg = <0xff288000 0x4000>; + }; + + sdmmc: mmc@ff480000 { + compatible = "rockchip,rk3506-dw-mshc", + "rockchip,rk3288-dw-mshc"; + reg = <0xff480000 0x4000>; + bus-width = <4>; + clocks = <&cru HCLK_SDMMC>, <&cru CCLK_SRC_SDMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4>, <&sdmmc_clk>, <&sdmmc_cmd>; + resets = <&cru SRST_H_SDMMC>; + reset-names = "reset"; + status = "disabled"; + }; + + fspi: spi@ff488000 { + compatible = "rockchip,sfc"; + reg = <0xff488000 0x4000>; + clocks = <&cru SCLK_FSPI>, <&cru HCLK_FSPI>; + clock-names = "clk_sfc", "hclk_sfc"; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gmac0: ethernet@ff4c8000 { + compatible = "rockchip,rk3506-gmac", "snps,dwmac-4.20a"; + reg = <0xff4c8000 0x2000>; + clocks = <&cru CLK_MAC0>, <&cru CLK_MAC0_PTP>, + <&cru PCLK_MAC0>, <&cru ACLK_MAC0>; + clock-names = "stmmaceth", "ptp_ref", + "pclk_mac", "aclk_mac"; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + phy-mode = "rmii"; + resets = <&cru SRST_A_MAC0>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,tso; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <8>; + snps,wr_osr_lmt = <4>; + }; + + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; + }; + + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + queue0 {}; + }; + }; + + gmac1: ethernet@ff4d0000 { + compatible = "rockchip,rk3506-gmac", "snps,dwmac-4.20a"; + reg = <0xff4d0000 0x2000>; + clocks = <&cru CLK_MAC1>, <&cru CLK_MAC1_PTP>, + <&cru PCLK_MAC1>, <&cru ACLK_MAC1>; + clock-names = "stmmaceth", "ptp_ref", + "pclk_mac", "aclk_mac"; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + phy-mode = "rmii"; + resets = <&cru SRST_A_MAC1>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + snps,axi-config = <&gmac1_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac1_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac1_mtl_tx_setup>; + snps,tso; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac1_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <8>; + snps,wr_osr_lmt = <4>; + }; + + gmac1_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; + }; + + gmac1_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + queue0 {}; + }; + }; + + gpio234_ioc: syscon@ff4d8000 { + compatible = "rockchip,rk3506-ioc234", "syscon"; + reg = <0xff4d8000 0x8000>; + }; + + uart5: serial@ff4e0000 { + compatible = "rockchip,rk3506-uart", "snps,dw-apb-uart"; + reg = <0xff4e0000 0x100>; + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac1 14>, <&dmac1 15>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart5m0_xfer>, <&uart5m0_ctsn>, + <&uart5m0_rtsn>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + saradc: adc@ff4e8000 { + compatible = "rockchip,rk3506-saradc", + "rockchip,rk3528-saradc"; + reg = <0xff4e8000 0x8000>; + clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + resets = <&cru SRST_P_SARADC>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + gic: interrupt-controller@ff581000 { + compatible = "arm,gic-400"; + reg = <0xff581000 0x1000>, + <0xff582000 0x2000>, + <0xff584000 0x2000>, + <0xff586000 0x2000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + gpio1_ioc: syscon@ff660000 { + compatible = "rockchip,rk3506-ioc1", "syscon"; + reg = <0xff660000 0x10000>; + }; + + grf_core: syscon@ff840000 { + compatible = "rockchip,rk3506-core-grf", "syscon", + "simple-mfd"; + reg = <0xff840000 0x4000>; + }; + + grf_pmu: syscon@ff910000 { + compatible = "rockchip,rk3506-pmu-grf", "syscon", + "simple-mfd"; + reg = <0xff910000 0x4000>; + }; + + gpio0_ioc: syscon@ff950000 { + compatible = "rockchip,rk3506-ioc0", "syscon"; + reg = <0xff950000 0x10000>; + }; + + cru: clock-controller@ff9a0000 { + compatible = "rockchip,rk3506-cru"; + reg = <0xff9a0000 0x20000>; + clocks = <&xin24m>; + clock-names = "xin"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; +}; + +#include "rk3506-pinctrl.dtsi" -- 2.56.1 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 2/8] ARM: dts: rockchip: Add support for RK3506 @ 2026-11-19 15:20 ` Jonas Karlman 0 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Richard Cochran Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman, netdev Add the initial devicetree for Rockchip RK3506 SoC. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- .../arm/boot/dts/rockchip/rk3506-pinctrl.dtsi | 576 ++++++++++++++++++ arch/arm/boot/dts/rockchip/rk3506.dtsi | 540 ++++++++++++++++ 2 files changed, 1116 insertions(+) create mode 100644 arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/rockchip/rk3506.dtsi diff --git a/arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi b/arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi new file mode 100644 index 000000000000..47f2962040d2 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi @@ -0,0 +1,576 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/pinctrl/rockchip.h> +#include <arm64/rockchip/rockchip-pinconf.dtsi> + +&pinctrl { + aupll-clk { + /omit-if-no-ref/ + aupll_clk_in: aupll-clk-in { + rockchip,pins = + /* aupll_clk_in */ + <0 RK_PC4 2 &pcfg_pull_none>; + }; + }; + + cpu { + /omit-if-no-ref/ + cpu_avs: cpu-avs { + rockchip,pins = + /* cpu_avs */ + <0 RK_PC5 1 &pcfg_pull_none>; + }; + }; + + eth-clk0-25m { + /omit-if-no-ref/ + eth_clk0_25m_out: eth-clk0-25m-out { + rockchip,pins = + /* eth_clk0_25m_out */ + <0 RK_PC4 1 &pcfg_pull_none>; + }; + }; + + eth-clk1-25m { + /omit-if-no-ref/ + eth_clk1_25m_out: eth-clk1-25m-out { + rockchip,pins = + /* eth_clk1_25m_out */ + <0 RK_PC3 1 &pcfg_pull_none>; + }; + }; + + eth-rmii0 { + /omit-if-no-ref/ + eth_rmii0_clk: eth-rmii0-clk { + rockchip,pins = + /* eth_rmii0_clk */ + <2 RK_PB2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + eth_rmii0_miim: eth-rmii0-miim { + rockchip,pins = + /* eth_rmii0_mdc */ + <2 RK_PB6 1 &pcfg_pull_none>, + /* eth_rmii0_mdio */ + <2 RK_PB7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + eth_rmii0_rx_bus2: eth-rmii0-rx-bus2 { + rockchip,pins = + /* eth_rmii0_rxd0 */ + <2 RK_PB0 1 &pcfg_pull_none>, + /* eth_rmii0_rxd1 */ + <2 RK_PB1 1 &pcfg_pull_none>, + /* eth_rmii0_rxdvcrs */ + <2 RK_PC0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + eth_rmii0_tx_bus2: eth-rmii0-tx-bus2 { + rockchip,pins = + /* eth_rmii0_txd0 */ + <2 RK_PB3 1 &pcfg_pull_none>, + /* eth_rmii0_txd1 */ + <2 RK_PB4 1 &pcfg_pull_none>, + /* eth_rmii0_txen */ + <2 RK_PB5 1 &pcfg_pull_none>; + }; + }; + + eth-rmii1 { + /omit-if-no-ref/ + eth_rmii1_clk: eth-rmii1-clk { + rockchip,pins = + /* eth_rmii1_clk */ + <3 RK_PB0 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + eth_rmii1_miim: eth-rmii1-miim { + rockchip,pins = + /* eth_rmii1_mdc */ + <3 RK_PB4 2 &pcfg_pull_none>, + /* eth_rmii1_mdio */ + <3 RK_PB5 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + eth_rmii1_rx_bus2: eth-rmii1-rx-bus2 { + rockchip,pins = + /* eth_rmii1_rxd0 */ + <3 RK_PA6 2 &pcfg_pull_none>, + /* eth_rmii1_rxd1 */ + <3 RK_PA7 2 &pcfg_pull_none>, + /* eth_rmii1_rxdvcrs */ + <3 RK_PB6 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + eth_rmii1_tx_bus2: eth-rmii1-tx-bus2 { + rockchip,pins = + /* eth_rmii1_txd0 */ + <3 RK_PB1 2 &pcfg_pull_none>, + /* eth_rmii1_txd1 */ + <3 RK_PB2 2 &pcfg_pull_none>, + /* eth_rmii1_txen */ + <3 RK_PB3 2 &pcfg_pull_none>; + }; + }; + + fspi { + /omit-if-no-ref/ + fspi_bus4: fspi-bus4 { + rockchip,pins = + /* fspi_d0 */ + <2 RK_PA2 1 &pcfg_pull_none>, + /* fspi_d1 */ + <2 RK_PA3 1 &pcfg_pull_none>, + /* fspi_d2 */ + <2 RK_PA4 1 &pcfg_pull_none>, + /* fspi_d3 */ + <2 RK_PA5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + fspi_clk: fspi-clk { + rockchip,pins = + /* fspi_clk */ + <2 RK_PA1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + fspi_csn: fspi-csn { + rockchip,pins = + /* fspi_csn */ + <2 RK_PA0 1 &pcfg_pull_none>; + }; + }; + + jtag { + /omit-if-no-ref/ + jtagm0: jtagm0 { + rockchip,pins = + /* jtag_tck_m0 */ + <3 RK_PA4 2 &pcfg_pull_none>, + /* jtag_tms_m0 */ + <3 RK_PA5 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + jtagm1: jtagm1 { + rockchip,pins = + /* jtag_tck_m1 */ + <0 RK_PC6 2 &pcfg_pull_none>, + /* jtag_tms_m1 */ + <0 RK_PC7 2 &pcfg_pull_none>; + }; + }; + + ref-clk1 { + /omit-if-no-ref/ + ref_clk1_out: ref-clk1-out { + rockchip,pins = + /* ref_clk1_out */ + <0 RK_PC2 1 &pcfg_pull_none>; + }; + }; + + sai0 { + /omit-if-no-ref/ + sai0_lrck: sai0-lrck { + rockchip,pins = + /* sai0_lrck */ + <0 RK_PA0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_mclk: sai0-mclk { + rockchip,pins = + /* sai0_mclk */ + <0 RK_PA2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_sclk: sai0-sclk { + rockchip,pins = + /* sai0_sclk */ + <0 RK_PA1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_sdi0: sai0-sdi0 { + rockchip,pins = + /* sai0_sdi0 */ + <0 RK_PA4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_sdi1: sai0-sdi1 { + rockchip,pins = + /* sai0_sdi1 */ + <0 RK_PA5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_sdi2: sai0-sdi2 { + rockchip,pins = + /* sai0_sdi2 */ + <0 RK_PA6 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_sdi3: sai0-sdi3 { + rockchip,pins = + /* sai0_sdi3 */ + <0 RK_PA7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai0_sdo: sai0-sdo { + rockchip,pins = + /* sai0_sdo */ + <0 RK_PA3 1 &pcfg_pull_none>; + }; + }; + + sai1 { + /omit-if-no-ref/ + sai1_lrck: sai1-lrck { + rockchip,pins = + /* sai1_lrck */ + <0 RK_PB2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_mclk: sai1-mclk { + rockchip,pins = + /* sai1_mclk */ + <0 RK_PB0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_sclk: sai1-sclk { + rockchip,pins = + /* sai1_sclk */ + <0 RK_PB1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_sdi: sai1-sdi { + rockchip,pins = + /* sai1_sdi */ + <0 RK_PB3 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_sdo0: sai1-sdo0 { + rockchip,pins = + /* sai1_sdo0 */ + <0 RK_PB4 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_sdo1: sai1-sdo1 { + rockchip,pins = + /* sai1_sdo1 */ + <0 RK_PB5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_sdo2: sai1-sdo2 { + rockchip,pins = + /* sai1_sdo2 */ + <0 RK_PB6 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai1_sdo3: sai1-sdo3 { + rockchip,pins = + /* sai1_sdo3 */ + <0 RK_PB7 1 &pcfg_pull_none>; + }; + }; + + sai2 { + /omit-if-no-ref/ + sai2m0_lrck: sai2m0-lrck { + rockchip,pins = + /* sai2_lrck_m0 */ + <3 RK_PB1 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m0_mclk: sai2m0-mclk { + rockchip,pins = + /* sai2_mclk_m0 */ + <3 RK_PB6 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m0_sclk: sai2m0-sclk { + rockchip,pins = + /* sai2_sclk_m0 */ + <3 RK_PA7 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m0_sdi: sai2m0-sdi { + rockchip,pins = + /* sai2m0_sdi */ + <3 RK_PA6 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m0_sdo: sai2m0-sdo { + rockchip,pins = + /* sai2m0_sdo */ + <3 RK_PB0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m1_lrck: sai2m1-lrck { + rockchip,pins = + /* sai2_lrck_m1 */ + <1 RK_PB3 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m1_mclk: sai2m1-mclk { + rockchip,pins = + /* sai2_mclk_m1 */ + <1 RK_PC1 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m1_sclk: sai2m1-sclk { + rockchip,pins = + /* sai2_sclk_m1 */ + <1 RK_PB2 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m1_sdi: sai2m1-sdi { + rockchip,pins = + /* sai2m1_sdi */ + <1 RK_PC2 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai2m1_sdo: sai2m1-sdo { + rockchip,pins = + /* sai2m1_sdo */ + <1 RK_PC3 6 &pcfg_pull_none>; + }; + }; + + sai3 { + /omit-if-no-ref/ + sai3_lrck: sai3-lrck { + rockchip,pins = + /* sai3_lrck */ + <2 RK_PB5 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai3_mclk: sai3-mclk { + rockchip,pins = + /* sai3_mclk */ + <2 RK_PC0 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai3_sclk: sai3-sclk { + rockchip,pins = + /* sai3_sclk */ + <2 RK_PB4 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai3_sdi: sai3-sdi { + rockchip,pins = + /* sai3_sdi */ + <2 RK_PB6 3 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sai3_sdo: sai3-sdo { + rockchip,pins = + /* sai3_sdo */ + <2 RK_PB7 3 &pcfg_pull_none>; + }; + }; + + sdmmc { + /omit-if-no-ref/ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + /* sdmmc_d0 */ + <3 RK_PA2 1 &pcfg_pull_up>, + /* sdmmc_d1 */ + <3 RK_PA3 1 &pcfg_pull_up>, + /* sdmmc_d2 */ + <3 RK_PA4 1 &pcfg_pull_up>, + /* sdmmc_d3 */ + <3 RK_PA5 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + sdmmc_clk: sdmmc-clk { + rockchip,pins = + /* sdmmc_clk */ + <3 RK_PA0 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + /* sdmmc_cmd */ + <3 RK_PA1 1 &pcfg_pull_up>; + }; + }; + + spi0 { + /omit-if-no-ref/ + spi0_clk: spi0-clk { + rockchip,pins = + /* spi0_clk */ + <0 RK_PC0 2 &pcfg_pull_none_drv_level_3>, + /* spi0_miso */ + <0 RK_PC2 2 &pcfg_pull_none_drv_level_3>, + /* spi0_mosi */ + <0 RK_PC1 2 &pcfg_pull_none_drv_level_3>; + }; + + /omit-if-no-ref/ + spi0_csn0: spi0-csn0 { + rockchip,pins = + /* spi0_csn0 */ + <0 RK_PC3 2 &pcfg_pull_none_drv_level_3>; + }; + + /omit-if-no-ref/ + spi0_csn1: spi0-csn1 { + rockchip,pins = + /* spi0_csn1 */ + <0 RK_PB7 2 &pcfg_pull_none_drv_level_3>; + }; + }; + + spi1 { + /omit-if-no-ref/ + spi1_clk: spi1-clk { + rockchip,pins = + /* spi1_clk */ + <0 RK_PB0 2 &pcfg_pull_none_drv_level_3>, + /* spi1_miso */ + <0 RK_PB2 2 &pcfg_pull_none_drv_level_3>, + /* spi1_mosi */ + <0 RK_PB1 2 &pcfg_pull_none_drv_level_3>; + }; + + /omit-if-no-ref/ + spi1_csn0: spi1-csn0 { + rockchip,pins = + /* spi1_csn0 */ + <0 RK_PB6 2 &pcfg_pull_none_drv_level_3>; + }; + + /omit-if-no-ref/ + spi1_csn1: spi1-csn1 { + rockchip,pins = + /* spi1_csn1 */ + <0 RK_PA7 2 &pcfg_pull_none_drv_level_3>; + }; + }; + + spi2 { + /omit-if-no-ref/ + spi2_clk: spi2-clk { + rockchip,pins = + /* spi2_clk */ + <2 RK_PB0 2 &pcfg_pull_none>, + /* spi2_miso */ + <2 RK_PB3 2 &pcfg_pull_none>, + /* spi2_mosi */ + <2 RK_PB2 2 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + spi2_csn: spi2-csn { + rockchip,pins = + /* spi2_csn */ + <2 RK_PB1 2 &pcfg_pull_none>; + }; + }; + + test-clk { + /omit-if-no-ref/ + test_clk_out: test-clk-out { + rockchip,pins = + /* test_clk_out */ + <3 RK_PA3 2 &pcfg_pull_none>; + }; + }; + + uart0 { + /omit-if-no-ref/ + uart0_xfer: uart0-xfer { + rockchip,pins = + /* uart0_rx */ + <0 RK_PC7 1 &pcfg_pull_up>, + /* uart0_tx */ + <0 RK_PC6 1 &pcfg_pull_up>; + }; + }; + + uart5 { + /omit-if-no-ref/ + uart5m0_ctsn: uart5m0-ctsn { + rockchip,pins = + /* uart5m0_ctsn */ + <3 RK_PB2 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m0_rtsn: uart5m0-rtsn { + rockchip,pins = + /* uart5m0_rtsn */ + <3 RK_PB5 1 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m0_xfer: uart5m0-xfer { + rockchip,pins = + /* uart5_rx_m0 */ + <3 RK_PB3 1 &pcfg_pull_up>, + /* uart5_tx_m0 */ + <3 RK_PB4 1 &pcfg_pull_up>; + }; + + /omit-if-no-ref/ + uart5m1_ctsn: uart5m1-ctsn { + rockchip,pins = + /* uart5m1_ctsn */ + <1 RK_PB1 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m1_rtsn: uart5m1-rtsn { + rockchip,pins = + /* uart5m1_rtsn */ + <1 RK_PD1 6 &pcfg_pull_none>; + }; + + /omit-if-no-ref/ + uart5m1_xfer: uart5m1-xfer { + rockchip,pins = + /* uart5_rx_m1 */ + <1 RK_PD3 6 &pcfg_pull_up>, + /* uart5_tx_m1 */ + <1 RK_PD2 6 &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rockchip/rk3506.dtsi b/arch/arm/boot/dts/rockchip/rk3506.dtsi new file mode 100644 index 000000000000..d8e942e6d0b1 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506.dtsi @@ -0,0 +1,540 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/clock/rockchip,rk3506-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/rockchip,rk3506-cru.h> + +/ { + compatible = "rockchip,rk3506"; + + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + }; + + xin24m: clock-xin24m { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + }; + }; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + }; + + cpu1: cpu@f01 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + }; + + cpu2: cpu@f02 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf02>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + }; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3506-pinctrl"; + rockchip,grf = <&gpio234_ioc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio@ff940000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff940000 0x200>; + clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + rockchip,grf = <&gpio0_ioc>; + }; + + gpio1: gpio@ff870000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff870000 0x200>; + clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + rockchip,grf = <&gpio1_ioc>; + }; + + gpio2: gpio@ff1c0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff1c0000 0x200>; + clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@ff1d0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff1d0000 0x200>; + clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@ff1e0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff1e0000 0x200>; + clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmu-a7 { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv7-timer"; + clock-frequency = <24000000>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dmac0: dma-controller@ff000000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff000000 0x4000>; + clocks = <&cru ACLK_DMAC0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + }; + + dmac1: dma-controller@ff008000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xff008000 0x4000>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + }; + + i2c0: i2c@ff040000 { + compatible = "rockchip,rk3506-i2c", + "rockchip,rk3399-i2c"; + reg = <0xff040000 0x1000>; + clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@ff050000 { + compatible = "rockchip,rk3506-i2c", + "rockchip,rk3399-i2c"; + reg = <0xff050000 0x1000>; + clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff060000 { + compatible = "rockchip,rk3506-i2c", + "rockchip,rk3399-i2c"; + reg = <0xff060000 0x1000>; + clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@ff0a0000 { + compatible = "rockchip,rk3506-uart", "snps,dw-apb-uart"; + reg = <0xff0a0000 0x100>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 4>, <&dmac0 5>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart1: serial@ff0b0000 { + compatible = "rockchip,rk3506-uart", "snps,dw-apb-uart"; + reg = <0xff0b0000 0x100>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 6>, <&dmac0 7>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: serial@ff0c0000 { + compatible = "rockchip,rk3506-uart", "snps,dw-apb-uart"; + reg = <0xff0c0000 0x100>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 8>, <&dmac0 9>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart3: serial@ff0d0000 { + compatible = "rockchip,rk3506-uart", "snps,dw-apb-uart"; + reg = <0xff0d0000 0x100>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac0 10>, <&dmac0 11>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: serial@ff0e0000 { + compatible = "rockchip,rk3506-uart", "snps,dw-apb-uart"; + reg = <0xff0e0000 0x100>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac1 12>, <&dmac1 13>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + spi0: spi@ff120000 { + compatible = "rockchip,rk3506-spi", + "rockchip,rk3066-spi"; + reg = <0xff120000 0x1000>; + clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_csn0>, <&spi0_csn1>, <&spi0_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@ff130000 { + compatible = "rockchip,rk3506-spi", + "rockchip,rk3066-spi"; + reg = <0xff130000 0x1000>; + clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_csn0>, <&spi1_csn1>, <&spi1_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt0: watchdog@ff260000 { + compatible = "rockchip,rk3506-wdt", "snps,dw-wdt"; + reg = <0xff260000 0x100>; + clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>; + clock-names = "tclk", "pclk"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + wdt1: watchdog@ff268000 { + compatible = "rockchip,rk3506-wdt", "snps,dw-wdt"; + reg = <0xff268000 0x100>; + clocks = <&cru TCLK_WDT1>, <&cru PCLK_WDT1>; + clock-names = "tclk", "pclk"; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + grf: syscon@ff288000 { + compatible = "rockchip,rk3506-grf", "syscon", + "simple-mfd"; + reg = <0xff288000 0x4000>; + }; + + sdmmc: mmc@ff480000 { + compatible = "rockchip,rk3506-dw-mshc", + "rockchip,rk3288-dw-mshc"; + reg = <0xff480000 0x4000>; + bus-width = <4>; + clocks = <&cru HCLK_SDMMC>, <&cru CCLK_SRC_SDMMC>; + clock-names = "biu", "ciu"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4>, <&sdmmc_clk>, <&sdmmc_cmd>; + resets = <&cru SRST_H_SDMMC>; + reset-names = "reset"; + status = "disabled"; + }; + + fspi: spi@ff488000 { + compatible = "rockchip,sfc"; + reg = <0xff488000 0x4000>; + clocks = <&cru SCLK_FSPI>, <&cru HCLK_FSPI>; + clock-names = "clk_sfc", "hclk_sfc"; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gmac0: ethernet@ff4c8000 { + compatible = "rockchip,rk3506-gmac", "snps,dwmac-4.20a"; + reg = <0xff4c8000 0x2000>; + clocks = <&cru CLK_MAC0>, <&cru CLK_MAC0_PTP>, + <&cru PCLK_MAC0>, <&cru ACLK_MAC0>; + clock-names = "stmmaceth", "ptp_ref", + "pclk_mac", "aclk_mac"; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + phy-mode = "rmii"; + resets = <&cru SRST_A_MAC0>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,tso; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <8>; + snps,wr_osr_lmt = <4>; + }; + + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; + }; + + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + queue0 {}; + }; + }; + + gmac1: ethernet@ff4d0000 { + compatible = "rockchip,rk3506-gmac", "snps,dwmac-4.20a"; + reg = <0xff4d0000 0x2000>; + clocks = <&cru CLK_MAC1>, <&cru CLK_MAC1_PTP>, + <&cru PCLK_MAC1>, <&cru ACLK_MAC1>; + clock-names = "stmmaceth", "ptp_ref", + "pclk_mac", "aclk_mac"; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + phy-mode = "rmii"; + resets = <&cru SRST_A_MAC1>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + snps,axi-config = <&gmac1_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac1_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac1_mtl_tx_setup>; + snps,tso; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac1_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <8>; + snps,wr_osr_lmt = <4>; + }; + + gmac1_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; + }; + + gmac1_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + queue0 {}; + }; + }; + + gpio234_ioc: syscon@ff4d8000 { + compatible = "rockchip,rk3506-ioc234", "syscon"; + reg = <0xff4d8000 0x8000>; + }; + + uart5: serial@ff4e0000 { + compatible = "rockchip,rk3506-uart", "snps,dw-apb-uart"; + reg = <0xff4e0000 0x100>; + clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac1 14>, <&dmac1 15>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart5m0_xfer>, <&uart5m0_ctsn>, + <&uart5m0_rtsn>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + saradc: adc@ff4e8000 { + compatible = "rockchip,rk3506-saradc", + "rockchip,rk3528-saradc"; + reg = <0xff4e8000 0x8000>; + clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + resets = <&cru SRST_P_SARADC>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + gic: interrupt-controller@ff581000 { + compatible = "arm,gic-400"; + reg = <0xff581000 0x1000>, + <0xff582000 0x2000>, + <0xff584000 0x2000>, + <0xff586000 0x2000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + gpio1_ioc: syscon@ff660000 { + compatible = "rockchip,rk3506-ioc1", "syscon"; + reg = <0xff660000 0x10000>; + }; + + grf_core: syscon@ff840000 { + compatible = "rockchip,rk3506-core-grf", "syscon", + "simple-mfd"; + reg = <0xff840000 0x4000>; + }; + + grf_pmu: syscon@ff910000 { + compatible = "rockchip,rk3506-pmu-grf", "syscon", + "simple-mfd"; + reg = <0xff910000 0x4000>; + }; + + gpio0_ioc: syscon@ff950000 { + compatible = "rockchip,rk3506-ioc0", "syscon"; + reg = <0xff950000 0x10000>; + }; + + cru: clock-controller@ff9a0000 { + compatible = "rockchip,rk3506-cru"; + reg = <0xff9a0000 0x20000>; + clocks = <&xin24m>; + clock-names = "xin"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; +}; + +#include "rk3506-pinctrl.dtsi" -- 2.56.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH 2/8] ARM: dts: rockchip: Add support for RK3506 2026-11-19 15:20 ` Jonas Karlman (?) @ 2026-11-20 15:21 ` sashiko-bot -1 siblings, 0 replies; 25+ messages in thread From: sashiko-bot @ 2026-11-20 15:21 UTC (permalink / raw) To: Jonas Karlman; +Cc: devicetree, robh, conor+dt Thank you for your contribution! Sashiko AI review found 1 potential issue to consider: - [High] ARM: dts: rockchip: rk3506 pinctrl syscon properties mismatch driver -- commit 0d85ace454fdd5b29f4d3efc2ed9fcf711e63afd Author: Jonas Karlman <jonas@kwiboo.se> ARM: dts: rockchip: Add support for RK3506 This commit adds the initial SoC and pinctrl devicetree files for the Rockchip RK3506 SoC. > diff --git a/arch/arm/boot/dts/rockchip/rk3506.dtsi b/arch/arm/boot/dts/rockchip/rk3506.dtsi > new file mode 100644 > index 0000000000000..d8e942e6d0b1d > --- /dev/null > +++ b/arch/arm/boot/dts/rockchip/rk3506.dtsi > @@ -0,0 +1,540 @@ [ ... ] > + pinctrl: pinctrl { > + compatible = "rockchip,rk3506-pinctrl"; > + rockchip,grf = <&gpio234_ioc>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + gpio0: gpio@ff940000 { > + compatible = "rockchip,gpio-bank"; > + reg = <0xff940000 0x200>; > + clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + rockchip,grf = <&gpio0_ioc>; > + }; > + > + gpio1: gpio@ff870000 { > + compatible = "rockchip,gpio-bank"; > + reg = <0xff870000 0x200>; > + clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + rockchip,grf = <&gpio1_ioc>; > + }; [Severity: High] Does omitting rockchip,pmu and rockchip,ioc1 on the parent pinctrl node leave info->regmap_pmu and info->regmap_ioc1 NULL in the pinctrl driver? rockchip_pinctrl_probe() populates info->regmap_pmu and info->regmap_ioc1 from rockchip,pmu and rockchip,ioc1 on the parent pinctrl node, while the per-bank rockchip,grf properties on gpio0 and gpio1 populate bank->regmap_ioc. However, the RK3506 callbacks in the driver ignore bank->regmap_ioc and use info->regmap_pmu and info->regmap_ioc1 directly: drivers/pinctrl/pinctrl-rockchip.c:rockchip_set_mux() { ... if (bank->regmap_ioc) regmap = bank->regmap_ioc; ... if (ctrl->type == RK3506) { if (bank->bank_num == 1) regmap = info->regmap_ioc1; else if (bank->bank_num == 4) return 0; } ... } drivers/pinctrl/pinctrl-rockchip.c:rk3506_calc_pull_reg_and_bit() { ... switch (bank->bank_num) { case 0: *regmap = info->regmap_pmu; ... case 1: *regmap = info->regmap_ioc1; ... } rk3506_calc_drv_reg_and_bit(), rk3506_calc_schmitt_reg_and_bit(), and rockchip_get_mux() do the same. When a board enables pinconf on bank 0 (such as uart0 with uart0_xfer) or pinmux/pinconf on bank 1, the driver passes a NULL regmap pointer to regmap_update_bits() or regmap_read(), causing a NULL pointer dereference during boot. -- Sashiko AI review · https://sashiko.dev/#/patchset/20261119152055.556266-1-jonas@kwiboo.se?part=2 ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 3/8] dt-bindings: arm: rockchip: Add Luckfox Lyra and Lyra Plus 2026-11-19 15:20 ` Jonas Karlman @ 2026-11-19 15:20 ` Jonas Karlman -1 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Luckfox Lyra and Lyra Plus is powered by the Rockchip RK3506G2 SoC, which integrates three Cortex-A7 cores, one Cortex-M0 core, and 128 MB of DDR3 memory. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index a5eec2ecf23c..37321e23b087 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -860,6 +860,13 @@ properties: - const: luckfox,core3576 - const: rockchip,rk3576 + - description: Luckfox Lyra boards + items: + - enum: + - luckfox,lyra + - luckfox,lyra-plus + - const: rockchip,rk3506 + - description: Lunzn FastRhino R66S / R68S items: - enum: -- 2.56.1 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 3/8] dt-bindings: arm: rockchip: Add Luckfox Lyra and Lyra Plus @ 2026-11-19 15:20 ` Jonas Karlman 0 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Luckfox Lyra and Lyra Plus is powered by the Rockchip RK3506G2 SoC, which integrates three Cortex-A7 cores, one Cortex-M0 core, and 128 MB of DDR3 memory. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index a5eec2ecf23c..37321e23b087 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -860,6 +860,13 @@ properties: - const: luckfox,core3576 - const: rockchip,rk3576 + - description: Luckfox Lyra boards + items: + - enum: + - luckfox,lyra + - luckfox,lyra-plus + - const: rockchip,rk3506 + - description: Lunzn FastRhino R66S / R68S items: - enum: -- 2.56.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 4/8] ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards 2026-11-19 15:20 ` Jonas Karlman @ 2026-11-19 15:20 ` Jonas Karlman -1 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Luckfox Lyra and Lyra Plus is powered by the Rockchip RK3506G2 SoC, which integrates three Cortex-A7 cores, one Cortex-M0 core, and 128 MB of DDR3 memory. Link: https://wiki.luckfox.com/Luckfox-Lyra/Luckfox-Lyra Link: https://wiki.luckfox.com/Luckfox-Lyra/Luckfox-Lyra-Plus Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- arch/arm/boot/dts/rockchip/Makefile | 4 +- .../dts/rockchip/rk3506-luckfox-lyra-plus.dts | 31 +++++ .../boot/dts/rockchip/rk3506-luckfox-lyra.dts | 9 ++ .../dts/rockchip/rk3506-luckfox-lyra.dtsi | 124 ++++++++++++++++++ 4 files changed, 167 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile index e9f9e0ac3bfd..df620116bb2d 100644 --- a/arch/arm/boot/dts/rockchip/Makefile +++ b/arch/arm/boot/dts/rockchip/Makefile @@ -45,4 +45,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-pinky.dtb \ rk3288-veyron-speedy.dtb \ rk3288-veyron-tiger.dtb \ - rk3288-vyasa.dtb + rk3288-vyasa.dtb \ + rk3506-luckfox-lyra-plus.dtb \ + rk3506-luckfox-lyra.dtb diff --git a/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts new file mode 100644 index 000000000000..c8991f4179bd --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3506-luckfox-lyra.dtsi" + +/ { + model = "Luckfox Lyra Plus"; + compatible = "luckfox,lyra-plus", "rockchip,rk3506"; + + aliases { + ethernet0 = &gmac1; + }; +}; + +&gmac1 { + assigned-clocks = <&cru CLK_MAC1>; + assigned-clock-rates = <50000000>; + phy-handle = <&rmii_phy1>; + pinctrl-names = "default"; + pinctrl-0 = <ð_rmii1_miim>, <ð_rmii1_tx_bus2>, + <ð_rmii1_rx_bus2>, <ð_rmii1_clk>; + clock_in_out = "output"; + status = "okay"; +}; + +&mdio1 { + rmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts new file mode 100644 index 000000000000..b7f11c7c510f --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3506-luckfox-lyra.dtsi" + +/ { + model = "Luckfox Lyra"; + compatible = "luckfox,lyra", "rockchip,rk3506"; +}; diff --git a/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi new file mode 100644 index 000000000000..d02d3a18b052 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include "rk3506.dtsi" + +/ { + aliases { + mmc0 = &sdmmc; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "Recovery"; + press-threshold-microvolt = <0>; + linux,code = <KEY_VENDOR>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&led1>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + }; + + vcc_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sd: regulator-3v3-sd { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + }; + + vcc5v0_sys: regulator-5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&fspi { + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + bootph-pre-ram; + bootph-some-ram; + spi-max-frequency = <80000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&pinctrl { + leds { + /omit-if-no-ref/ + led1: led1 { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc { + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-sdio; + vmmc-supply = <&vcc3v3_sd>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; -- 2.56.1 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 4/8] ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards @ 2026-11-19 15:20 ` Jonas Karlman 0 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Luckfox Lyra and Lyra Plus is powered by the Rockchip RK3506G2 SoC, which integrates three Cortex-A7 cores, one Cortex-M0 core, and 128 MB of DDR3 memory. Link: https://wiki.luckfox.com/Luckfox-Lyra/Luckfox-Lyra Link: https://wiki.luckfox.com/Luckfox-Lyra/Luckfox-Lyra-Plus Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- arch/arm/boot/dts/rockchip/Makefile | 4 +- .../dts/rockchip/rk3506-luckfox-lyra-plus.dts | 31 +++++ .../boot/dts/rockchip/rk3506-luckfox-lyra.dts | 9 ++ .../dts/rockchip/rk3506-luckfox-lyra.dtsi | 124 ++++++++++++++++++ 4 files changed, 167 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile index e9f9e0ac3bfd..df620116bb2d 100644 --- a/arch/arm/boot/dts/rockchip/Makefile +++ b/arch/arm/boot/dts/rockchip/Makefile @@ -45,4 +45,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-pinky.dtb \ rk3288-veyron-speedy.dtb \ rk3288-veyron-tiger.dtb \ - rk3288-vyasa.dtb + rk3288-vyasa.dtb \ + rk3506-luckfox-lyra-plus.dtb \ + rk3506-luckfox-lyra.dtb diff --git a/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts new file mode 100644 index 000000000000..c8991f4179bd --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3506-luckfox-lyra.dtsi" + +/ { + model = "Luckfox Lyra Plus"; + compatible = "luckfox,lyra-plus", "rockchip,rk3506"; + + aliases { + ethernet0 = &gmac1; + }; +}; + +&gmac1 { + assigned-clocks = <&cru CLK_MAC1>; + assigned-clock-rates = <50000000>; + phy-handle = <&rmii_phy1>; + pinctrl-names = "default"; + pinctrl-0 = <ð_rmii1_miim>, <ð_rmii1_tx_bus2>, + <ð_rmii1_rx_bus2>, <ð_rmii1_clk>; + clock_in_out = "output"; + status = "okay"; +}; + +&mdio1 { + rmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts new file mode 100644 index 000000000000..b7f11c7c510f --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3506-luckfox-lyra.dtsi" + +/ { + model = "Luckfox Lyra"; + compatible = "luckfox,lyra", "rockchip,rk3506"; +}; diff --git a/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi new file mode 100644 index 000000000000..d02d3a18b052 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include "rk3506.dtsi" + +/ { + aliases { + mmc0 = &sdmmc; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "Recovery"; + press-threshold-microvolt = <0>; + linux,code = <KEY_VENDOR>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&led1>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + }; + + vcc_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sd: regulator-3v3-sd { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + }; + + vcc5v0_sys: regulator-5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&fspi { + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + bootph-pre-ram; + bootph-some-ram; + spi-max-frequency = <80000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&pinctrl { + leds { + /omit-if-no-ref/ + led1: led1 { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc { + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-sdio; + vmmc-supply = <&vcc3v3_sd>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; -- 2.56.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH 4/8] ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards 2026-11-19 15:20 ` Jonas Karlman (?) @ 2026-11-20 15:21 ` sashiko-bot -1 siblings, 0 replies; 25+ messages in thread From: sashiko-bot @ 2026-11-20 15:21 UTC (permalink / raw) To: Jonas Karlman; +Cc: devicetree, robh, conor+dt Thank you for your contribution! Sashiko AI review found 2 potential issues to consider: - [High] ARM: dts: rockchip: NULL regmap dereference in pinctrl on RK3506 banks 0 and 1 - [Medium] ARM: dts: rockchip: missing pinctrl configuration on enabled fspi node -- commit 4fbf9c971fb720e3dc9fb2b66cb41a8a5d9471ec Author: Jonas Karlman <jonas@kwiboo.se> ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards This commit adds device trees for the Rockchip RK3506G2-based Luckfox Lyra and Luckfox Lyra Plus boards. Link: https://wiki.luckfox.com/Luckfox-Lyra/Luckfox-Lyra Link: https://wiki.luckfox.com/Luckfox-Lyra/Luckfox-Lyra-Plus > diff --git a/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi > new file mode 100644 > index 0000000000000..d02d3a18b052f > --- /dev/null > +++ b/arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi > @@ -0,0 +1,124 @@ [ ... ] > + leds { > + compatible = "gpio-leds"; > + > + led-0 { > + color = <LED_COLOR_ID_RED>; > + default-state = "on"; > + function = LED_FUNCTION_HEARTBEAT; > + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&led1>; > + linux,default-trigger = "heartbeat"; > + }; > + }; [Severity: High] Does probing led-0 (on bank 1) and uart0 (on bank 0) cause a NULL pointer dereference in the pinctrl driver during boot? In rk3506.dtsi, gpio0 and gpio1 specify per-bank rockchip,grf phandles (populating bank->regmap_ioc), while the parent pinctrl node omits rockchip,pmu and rockchip,ioc1 (leaving info->regmap_pmu and info->regmap_ioc1 NULL). However, on RK3506 the pinctrl driver ignores bank->regmap_ioc for banks 0 and 1 and uses info->regmap_pmu and info->regmap_ioc1 instead: drivers/pinctrl/pinctrl-rockchip.c:rockchip_set_mux() { ... if (bank->regmap_ioc) regmap = bank->regmap_ioc; ... if (ctrl->type == RK3506) { if (bank->bank_num == 1) regmap = info->regmap_ioc1; else if (bank->bank_num == 4) return 0; } ... } drivers/pinctrl/pinctrl-rockchip.c:rk3506_calc_pull_reg_and_bit() { ... switch (bank->bank_num) { case 0: *regmap = info->regmap_pmu; ... case 1: *regmap = info->regmap_ioc1; ... } When led-0 applies &led1 on bank 1 or uart0 applies &uart0_xfer on bank 0, rockchip_set_mux() and rockchip_set_pull() pass a NULL regmap to regmap_update_bits(). [ ... ] > +&fspi { > + status = "okay"; > + > + flash@0 { > + compatible = "spi-nand"; > + reg = <0>; > + bootph-pre-ram; > + bootph-some-ram; > + spi-max-frequency = <80000000>; > + spi-rx-bus-width = <4>; > + spi-tx-bus-width = <1>; > + }; > +}; [Severity: Medium] Should &fspi configure pinctrl-names and pinctrl-0 here? Unlike other peripheral nodes in rk3506.dtsi, the base fspi node defines no default pinctrl properties, and fspi_bus4, fspi_clk, and fspi_csn in rk3506-pinctrl.dtsi are marked /omit-if-no-ref/. Without referencing them on &fspi, dtc strips those pinmux nodes from the DTB and the controller probes without muxing GPIO2_A0..GPIO2_A5 for 4-bit FSPI, breaking SPI-NAND access whenever prior firmware has not already configured the pins in 4-bit mode (such as when booting from SDMMC). -- Sashiko AI review · https://sashiko.dev/#/patchset/20261119152055.556266-1-jonas@kwiboo.se?part=4 ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 5/8] dt-bindings: arm: rockchip: Add Luckfox Lyra Ultra 2026-11-19 15:20 ` Jonas Karlman @ 2026-11-19 15:20 ` Jonas Karlman -1 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Luckfox Lyra Ultra is powered by the Rockchip RK3506B SoC, which integrates three Cortex-A7 cores and one Cortex-M0 core. It includes 512 MB of DDR3 memory, 8 GB of eMMC storage, MIPI DSI, Ethernet, and IO expansion interfaces. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- As mentioned in cover letter, unclear if this should use rockchip,rk3506b instead of rockchip,rk3506. --- Documentation/devicetree/bindings/arm/rockchip.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 37321e23b087..651da02cfa51 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -865,6 +865,7 @@ properties: - enum: - luckfox,lyra - luckfox,lyra-plus + - luckfox,lyra-ultra - const: rockchip,rk3506 - description: Lunzn FastRhino R66S / R68S -- 2.56.1 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 5/8] dt-bindings: arm: rockchip: Add Luckfox Lyra Ultra @ 2026-11-19 15:20 ` Jonas Karlman 0 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Luckfox Lyra Ultra is powered by the Rockchip RK3506B SoC, which integrates three Cortex-A7 cores and one Cortex-M0 core. It includes 512 MB of DDR3 memory, 8 GB of eMMC storage, MIPI DSI, Ethernet, and IO expansion interfaces. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- As mentioned in cover letter, unclear if this should use rockchip,rk3506b instead of rockchip,rk3506. --- Documentation/devicetree/bindings/arm/rockchip.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 37321e23b087..651da02cfa51 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -865,6 +865,7 @@ properties: - enum: - luckfox,lyra - luckfox,lyra-plus + - luckfox,lyra-ultra - const: rockchip,rk3506 - description: Lunzn FastRhino R66S / R68S -- 2.56.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 6/8] ARM: dts: rockchip: Add Luckfox Lyra Ultra board 2026-11-19 15:20 ` Jonas Karlman @ 2026-11-19 15:20 ` Jonas Karlman -1 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Luckfox Lyra Ultra is powered by the Rockchip RK3506B SoC, which integrates three Cortex-A7 cores and one Cortex-M0 core. It includes 512 MB of DDR3 memory, 8 GB of eMMC storage, MIPI DSI, Ethernet, and IO expansion interfaces. Link: https://wiki.luckfox.com/Luckfox-Lyra/Luckfox-Lyra-Ultra Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- As mentioned in cover letter, unclear if this should use rockchip,rk3506b instead of rockchip,rk3506. --- arch/arm/boot/dts/rockchip/Makefile | 3 +- .../rockchip/rk3506b-luckfox-lyra-ultra.dts | 31 ++++++ .../dts/rockchip/rk3506b-luckfox-lyra.dtsi | 100 ++++++++++++++++++ 3 files changed, 133 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile index df620116bb2d..9a699bb8fc5a 100644 --- a/arch/arm/boot/dts/rockchip/Makefile +++ b/arch/arm/boot/dts/rockchip/Makefile @@ -47,4 +47,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-tiger.dtb \ rk3288-vyasa.dtb \ rk3506-luckfox-lyra-plus.dtb \ - rk3506-luckfox-lyra.dtb + rk3506-luckfox-lyra.dtb \ + rk3506b-luckfox-lyra-ultra.dtb diff --git a/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts new file mode 100644 index 000000000000..5a3eb35eb70e --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3506b-luckfox-lyra.dtsi" + +/ { + model = "Luckfox Lyra Ultra"; + compatible = "luckfox,lyra-ultra", "rockchip,rk3506"; + + aliases { + ethernet0 = &gmac1; + }; +}; + +&gmac1 { + assigned-clocks = <&cru CLK_MAC1>; + assigned-clock-rates = <50000000>; + phy-handle = <&rmii_phy1>; + pinctrl-names = "default"; + pinctrl-0 = <ð_rmii1_miim>, <ð_rmii1_tx_bus2>, + <ð_rmii1_rx_bus2>, <ð_rmii1_clk>; + clock_in_out = "output"; + status = "okay"; +}; + +&mdio1 { + rmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi new file mode 100644 index 000000000000..c422053c1262 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include "rk3506.dtsi" + +/ { + aliases { + mmc0 = &sdmmc; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "Recovery"; + press-threshold-microvolt = <0>; + linux,code = <KEY_VENDOR>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&led1>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + }; + + vcc_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&pinctrl { + leds { + /omit-if-no-ref/ + led1: led1 { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc { + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-sdio; + vmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; -- 2.56.1 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 6/8] ARM: dts: rockchip: Add Luckfox Lyra Ultra board @ 2026-11-19 15:20 ` Jonas Karlman 0 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Luckfox Lyra Ultra is powered by the Rockchip RK3506B SoC, which integrates three Cortex-A7 cores and one Cortex-M0 core. It includes 512 MB of DDR3 memory, 8 GB of eMMC storage, MIPI DSI, Ethernet, and IO expansion interfaces. Link: https://wiki.luckfox.com/Luckfox-Lyra/Luckfox-Lyra-Ultra Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- As mentioned in cover letter, unclear if this should use rockchip,rk3506b instead of rockchip,rk3506. --- arch/arm/boot/dts/rockchip/Makefile | 3 +- .../rockchip/rk3506b-luckfox-lyra-ultra.dts | 31 ++++++ .../dts/rockchip/rk3506b-luckfox-lyra.dtsi | 100 ++++++++++++++++++ 3 files changed, 133 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile index df620116bb2d..9a699bb8fc5a 100644 --- a/arch/arm/boot/dts/rockchip/Makefile +++ b/arch/arm/boot/dts/rockchip/Makefile @@ -47,4 +47,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-tiger.dtb \ rk3288-vyasa.dtb \ rk3506-luckfox-lyra-plus.dtb \ - rk3506-luckfox-lyra.dtb + rk3506-luckfox-lyra.dtb \ + rk3506b-luckfox-lyra-ultra.dtb diff --git a/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts new file mode 100644 index 000000000000..5a3eb35eb70e --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3506b-luckfox-lyra.dtsi" + +/ { + model = "Luckfox Lyra Ultra"; + compatible = "luckfox,lyra-ultra", "rockchip,rk3506"; + + aliases { + ethernet0 = &gmac1; + }; +}; + +&gmac1 { + assigned-clocks = <&cru CLK_MAC1>; + assigned-clock-rates = <50000000>; + phy-handle = <&rmii_phy1>; + pinctrl-names = "default"; + pinctrl-0 = <ð_rmii1_miim>, <ð_rmii1_tx_bus2>, + <ð_rmii1_rx_bus2>, <ð_rmii1_clk>; + clock_in_out = "output"; + status = "okay"; +}; + +&mdio1 { + rmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi new file mode 100644 index 000000000000..c422053c1262 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include "rk3506.dtsi" + +/ { + aliases { + mmc0 = &sdmmc; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "Recovery"; + press-threshold-microvolt = <0>; + linux,code = <KEY_VENDOR>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&led1>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + }; + + vcc_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: regulator-5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&pinctrl { + leds { + /omit-if-no-ref/ + led1: led1 { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc { + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + no-sdio; + vmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; -- 2.56.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 7/8] dt-bindings: arm: rockchip: Add Luckfox Lyra Zero W 2026-11-19 15:20 ` Jonas Karlman @ 2026-11-19 15:20 ` Jonas Karlman -1 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Luckfox Lyra Zero W is a compact wireless development board powered by the Rockchip RK3506B SoC. It includes 512 MB of DDR3 memory, 256 MB of SPI NAND flash, 2.4 GHz Wi-Fi 6, Bluetooth 5.2, and BLE connectivity. MIPI DSI, USB OTG, USB Host, and RM_IO interfaces are available for peripheral expansion. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- As mentioned in cover letter, unclear if this should use rockchip,rk3506b instead of rockchip,rk3506. --- Documentation/devicetree/bindings/arm/rockchip.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 651da02cfa51..49c61ee985e7 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -866,6 +866,7 @@ properties: - luckfox,lyra - luckfox,lyra-plus - luckfox,lyra-ultra + - luckfox,lyra-zero-w - const: rockchip,rk3506 - description: Lunzn FastRhino R66S / R68S -- 2.56.1 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 7/8] dt-bindings: arm: rockchip: Add Luckfox Lyra Zero W @ 2026-11-19 15:20 ` Jonas Karlman 0 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Luckfox Lyra Zero W is a compact wireless development board powered by the Rockchip RK3506B SoC. It includes 512 MB of DDR3 memory, 256 MB of SPI NAND flash, 2.4 GHz Wi-Fi 6, Bluetooth 5.2, and BLE connectivity. MIPI DSI, USB OTG, USB Host, and RM_IO interfaces are available for peripheral expansion. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- As mentioned in cover letter, unclear if this should use rockchip,rk3506b instead of rockchip,rk3506. --- Documentation/devicetree/bindings/arm/rockchip.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 651da02cfa51..49c61ee985e7 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -866,6 +866,7 @@ properties: - luckfox,lyra - luckfox,lyra-plus - luckfox,lyra-ultra + - luckfox,lyra-zero-w - const: rockchip,rk3506 - description: Lunzn FastRhino R66S / R68S -- 2.56.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 8/8] ARM: dts: rockchip: Add Luckfox Lyra Zero W board 2026-11-19 15:20 ` Jonas Karlman @ 2026-11-19 15:20 ` Jonas Karlman -1 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Luckfox Lyra Zero W is a compact wireless development board powered by the Rockchip RK3506B SoC. It includes 512 MB of DDR3 memory, 256 MB of SPI NAND flash, 2.4 GHz Wi-Fi 6, Bluetooth 5.2, and BLE connectivity. MIPI DSI, USB OTG, USB Host, and RM_IO interfaces are available for peripheral expansion. Link: https://wiki.luckfox.com/Luckfox-Lyra/Luckfox-Lyra-Zero-W Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- As mentioned in cover letter, unclear if this should use rockchip,rk3506b instead of rockchip,rk3506. --- arch/arm/boot/dts/rockchip/Makefile | 3 ++- .../rockchip/rk3506b-luckfox-lyra-zero-w.dts | 23 +++++++++++++++++++ 2 files changed, 25 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile index 9a699bb8fc5a..faebeb20f467 100644 --- a/arch/arm/boot/dts/rockchip/Makefile +++ b/arch/arm/boot/dts/rockchip/Makefile @@ -48,4 +48,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-vyasa.dtb \ rk3506-luckfox-lyra-plus.dtb \ rk3506-luckfox-lyra.dtb \ - rk3506b-luckfox-lyra-ultra.dtb + rk3506b-luckfox-lyra-ultra.dtb \ + rk3506b-luckfox-lyra-zero-w.dtb diff --git a/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts new file mode 100644 index 000000000000..f2fa513e8bff --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3506b-luckfox-lyra.dtsi" + +/ { + model = "Luckfox Lyra Zero W"; + compatible = "luckfox,lyra-zero-w", "rockchip,rk3506"; +}; + +&fspi { + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + bootph-pre-ram; + bootph-some-ram; + spi-max-frequency = <80000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; -- 2.56.1 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH 8/8] ARM: dts: rockchip: Add Luckfox Lyra Zero W board @ 2026-11-19 15:20 ` Jonas Karlman 0 siblings, 0 replies; 25+ messages in thread From: Jonas Karlman @ 2026-11-19 15:20 UTC (permalink / raw) To: Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: devicetree, linux-rockchip, linux-arm-kernel, linux-kernel, Jonas Karlman Luckfox Lyra Zero W is a compact wireless development board powered by the Rockchip RK3506B SoC. It includes 512 MB of DDR3 memory, 256 MB of SPI NAND flash, 2.4 GHz Wi-Fi 6, Bluetooth 5.2, and BLE connectivity. MIPI DSI, USB OTG, USB Host, and RM_IO interfaces are available for peripheral expansion. Link: https://wiki.luckfox.com/Luckfox-Lyra/Luckfox-Lyra-Zero-W Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- As mentioned in cover letter, unclear if this should use rockchip,rk3506b instead of rockchip,rk3506. --- arch/arm/boot/dts/rockchip/Makefile | 3 ++- .../rockchip/rk3506b-luckfox-lyra-zero-w.dts | 23 +++++++++++++++++++ 2 files changed, 25 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile index 9a699bb8fc5a..faebeb20f467 100644 --- a/arch/arm/boot/dts/rockchip/Makefile +++ b/arch/arm/boot/dts/rockchip/Makefile @@ -48,4 +48,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-vyasa.dtb \ rk3506-luckfox-lyra-plus.dtb \ rk3506-luckfox-lyra.dtb \ - rk3506b-luckfox-lyra-ultra.dtb + rk3506b-luckfox-lyra-ultra.dtb \ + rk3506b-luckfox-lyra-zero-w.dtb diff --git a/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts new file mode 100644 index 000000000000..f2fa513e8bff --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3506b-luckfox-lyra.dtsi" + +/ { + model = "Luckfox Lyra Zero W"; + compatible = "luckfox,lyra-zero-w", "rockchip,rk3506"; +}; + +&fspi { + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + bootph-pre-ram; + bootph-some-ram; + spi-max-frequency = <80000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; -- 2.56.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH 8/8] ARM: dts: rockchip: Add Luckfox Lyra Zero W board 2026-11-19 15:20 ` Jonas Karlman (?) @ 2026-11-20 15:21 ` sashiko-bot -1 siblings, 0 replies; 25+ messages in thread From: sashiko-bot @ 2026-11-20 15:21 UTC (permalink / raw) To: Jonas Karlman; +Cc: devicetree, robh, conor+dt Thank you for your contribution! Sashiko AI review found 1 potential issue to consider: - [Medium] ARM: dts: rockchip: missing pinctrl properties on enabled fspi node -- commit 48e50ced88fba2da121063679ad813c27667c9d5 Author: Jonas Karlman <jonas@kwiboo.se> ARM: dts: rockchip: Add Luckfox Lyra Zero W board This commit adds the device tree for the Rockchip RK3506B-based Luckfox Lyra Zero W development board. Link: https://wiki.luckfox.com/Luckfox-Lyra/Luckfox-Lyra-Zero-W > diff --git a/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts > new file mode 100644 > index 0000000000000..f2fa513e8bff1 > --- /dev/null > +++ b/arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts > @@ -0,0 +1,23 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > + > +/dts-v1/; > +#include "rk3506b-luckfox-lyra.dtsi" > + > +/ { > + model = "Luckfox Lyra Zero W"; > + compatible = "luckfox,lyra-zero-w", "rockchip,rk3506"; > +}; > + > +&fspi { > + status = "okay"; > + > + flash@0 { > + compatible = "spi-nand"; > + reg = <0>; > + bootph-pre-ram; > + bootph-some-ram; > + spi-max-frequency = <80000000>; > + spi-rx-bus-width = <4>; > + spi-tx-bus-width = <1>; > + }; > +}; [Severity: Medium] Should &fspi define pinctrl-names = "default" and pinctrl-0 = <&fspi_bus4 &fspi_clk &fspi_csn>? The fspi node in rk3506.dtsi has no default pinctrl properties, and the fspi_bus4, fspi_clk, and fspi_csn pinmux nodes in rk3506-pinctrl.dtsi are marked /omit-if-no-ref/. Without referencing them here, dtc strips those pinmux nodes from the DTB and the pinctrl subsystem cannot mux the FSPI pins when the bootloader has not pre-configured all four data lines. -- Sashiko AI review · https://sashiko.dev/#/patchset/20261119152055.556266-1-jonas@kwiboo.se?part=8 ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/8] ARM: dts: rockchip: Add Luckfox Lyra boards 2026-11-19 15:20 ` Jonas Karlman @ 2026-11-20 2:53 ` Chaoyi Chen -1 siblings, 0 replies; 25+ messages in thread From: Chaoyi Chen @ 2026-11-20 2:53 UTC (permalink / raw) To: Jonas Karlman, Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: Ye Zhang, devicetree, linux-rockchip, linux-arm-kernel, linux-kernel Hi Jonas, On 11/19/2026 11:20 PM, Jonas Karlman wrote: > This series adds initial devicetree for Rockchip RK3506 SoC and initial > support for Luckfox Lyra board family [1]. > > The Luckfox Lyra board family use different RK3506 SoC variants, i.e. Lyra > and Lyra Plus both use RK3506G2 and Lyra Ultra and Lyra Zero W both use the > RK3506B varaiant. > > All board compatibles use rockchip,rk3506 in this revision of the series, > maybe we should use rockchip,rk3506b for the RK3506B (and RK3506J) variants? > > The pinctrl driver for RK3506 will not work as-is using the SoC DT from this > series. The already merged driver depends on a rockchip,ioc1 phandle prop > that never was described in dt-bindings. The SoC DT in this series instead > uses rockchip,grf in GPIO controller node to reference correct IOC for GPIO0 > and GPIO1. > > The branch at [2] contains follow-up patches that e.g. fixes pinctrl driver > and adds USB support. Perhaps these pinctrl patches should be included before the dts patch? Cc: Ye Zhang <ye.zhang@rock-chips.com> > > Mainline U-Boot support can be tested using a branch at [3], it contains > board support using same devicetree files extended with USB support. > > [1] https://wiki.luckfox.com/Luckfox-Lyra > [2] https://github.com/Kwiboo/linux-rockchip/commits/next-20261116-rk3506 > [3] https://git.u-boot-project.org/u-boot/contributors/kwiboo/u-boot/-/commits/rk3506 > > Jonas Karlman (8): > dt-bindings: soc: rockchip: grf: Add RK3506 compatibles > ARM: dts: rockchip: Add support for RK3506 > dt-bindings: arm: rockchip: Add Luckfox Lyra and Lyra Plus > ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards > dt-bindings: arm: rockchip: Add Luckfox Lyra Ultra > ARM: dts: rockchip: Add Luckfox Lyra Ultra board > dt-bindings: arm: rockchip: Add Luckfox Lyra Zero W > ARM: dts: rockchip: Add Luckfox Lyra Zero W board > > .../devicetree/bindings/arm/rockchip.yaml | 9 + > .../devicetree/bindings/soc/rockchip/grf.yaml | 6 + > arch/arm/boot/dts/rockchip/Makefile | 6 +- > .../dts/rockchip/rk3506-luckfox-lyra-plus.dts | 31 + > .../boot/dts/rockchip/rk3506-luckfox-lyra.dts | 9 + > .../dts/rockchip/rk3506-luckfox-lyra.dtsi | 124 ++++ > .../arm/boot/dts/rockchip/rk3506-pinctrl.dtsi | 576 ++++++++++++++++++ > arch/arm/boot/dts/rockchip/rk3506.dtsi | 540 ++++++++++++++++ > .../rockchip/rk3506b-luckfox-lyra-ultra.dts | 31 + > .../rockchip/rk3506b-luckfox-lyra-zero-w.dts | 23 + > .../dts/rockchip/rk3506b-luckfox-lyra.dtsi | 100 +++ > 11 files changed, 1454 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts > create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts > create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi > create mode 100644 arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi > create mode 100644 arch/arm/boot/dts/rockchip/rk3506.dtsi > create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts > create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts > create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi > -- Best, Chaoyi ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/8] ARM: dts: rockchip: Add Luckfox Lyra boards @ 2026-11-20 2:53 ` Chaoyi Chen 0 siblings, 0 replies; 25+ messages in thread From: Chaoyi Chen @ 2026-11-20 2:53 UTC (permalink / raw) To: Jonas Karlman, Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: Ye Zhang, devicetree, linux-rockchip, linux-arm-kernel, linux-kernel Hi Jonas, On 11/19/2026 11:20 PM, Jonas Karlman wrote: > This series adds initial devicetree for Rockchip RK3506 SoC and initial > support for Luckfox Lyra board family [1]. > > The Luckfox Lyra board family use different RK3506 SoC variants, i.e. Lyra > and Lyra Plus both use RK3506G2 and Lyra Ultra and Lyra Zero W both use the > RK3506B varaiant. > > All board compatibles use rockchip,rk3506 in this revision of the series, > maybe we should use rockchip,rk3506b for the RK3506B (and RK3506J) variants? > > The pinctrl driver for RK3506 will not work as-is using the SoC DT from this > series. The already merged driver depends on a rockchip,ioc1 phandle prop > that never was described in dt-bindings. The SoC DT in this series instead > uses rockchip,grf in GPIO controller node to reference correct IOC for GPIO0 > and GPIO1. > > The branch at [2] contains follow-up patches that e.g. fixes pinctrl driver > and adds USB support. Perhaps these pinctrl patches should be included before the dts patch? Cc: Ye Zhang <ye.zhang@rock-chips.com> > > Mainline U-Boot support can be tested using a branch at [3], it contains > board support using same devicetree files extended with USB support. > > [1] https://wiki.luckfox.com/Luckfox-Lyra > [2] https://github.com/Kwiboo/linux-rockchip/commits/next-20261116-rk3506 > [3] https://git.u-boot-project.org/u-boot/contributors/kwiboo/u-boot/-/commits/rk3506 > > Jonas Karlman (8): > dt-bindings: soc: rockchip: grf: Add RK3506 compatibles > ARM: dts: rockchip: Add support for RK3506 > dt-bindings: arm: rockchip: Add Luckfox Lyra and Lyra Plus > ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards > dt-bindings: arm: rockchip: Add Luckfox Lyra Ultra > ARM: dts: rockchip: Add Luckfox Lyra Ultra board > dt-bindings: arm: rockchip: Add Luckfox Lyra Zero W > ARM: dts: rockchip: Add Luckfox Lyra Zero W board > > .../devicetree/bindings/arm/rockchip.yaml | 9 + > .../devicetree/bindings/soc/rockchip/grf.yaml | 6 + > arch/arm/boot/dts/rockchip/Makefile | 6 +- > .../dts/rockchip/rk3506-luckfox-lyra-plus.dts | 31 + > .../boot/dts/rockchip/rk3506-luckfox-lyra.dts | 9 + > .../dts/rockchip/rk3506-luckfox-lyra.dtsi | 124 ++++ > .../arm/boot/dts/rockchip/rk3506-pinctrl.dtsi | 576 ++++++++++++++++++ > arch/arm/boot/dts/rockchip/rk3506.dtsi | 540 ++++++++++++++++ > .../rockchip/rk3506b-luckfox-lyra-ultra.dts | 31 + > .../rockchip/rk3506b-luckfox-lyra-zero-w.dts | 23 + > .../dts/rockchip/rk3506b-luckfox-lyra.dtsi | 100 +++ > 11 files changed, 1454 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts > create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts > create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi > create mode 100644 arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi > create mode 100644 arch/arm/boot/dts/rockchip/rk3506.dtsi > create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts > create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts > create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi > -- Best, Chaoyi _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/8] ARM: dts: rockchip: Add Luckfox Lyra boards 2026-11-20 2:53 ` Chaoyi Chen @ 2026-11-20 3:02 ` Chaoyi Chen -1 siblings, 0 replies; 25+ messages in thread From: Chaoyi Chen @ 2026-11-20 3:02 UTC (permalink / raw) To: Jonas Karlman, Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: Ye Zhang, devicetree, linux-rockchip, linux-arm-kernel, linux-kernel On 11/20/2026 10:53 AM, Chaoyi Chen wrote: > Hi Jonas, > > On 11/19/2026 11:20 PM, Jonas Karlman wrote: >> This series adds initial devicetree for Rockchip RK3506 SoC and initial >> support for Luckfox Lyra board family [1]. >> >> The Luckfox Lyra board family use different RK3506 SoC variants, i.e. Lyra >> and Lyra Plus both use RK3506G2 and Lyra Ultra and Lyra Zero W both use the >> RK3506B varaiant. >> >> All board compatibles use rockchip,rk3506 in this revision of the series, >> maybe we should use rockchip,rk3506b for the RK3506B (and RK3506J) variants? >> >> The pinctrl driver for RK3506 will not work as-is using the SoC DT from this >> series. The already merged driver depends on a rockchip,ioc1 phandle prop >> that never was described in dt-bindings. The SoC DT in this series instead >> uses rockchip,grf in GPIO controller node to reference correct IOC for GPIO0 >> and GPIO1. >> >> The branch at [2] contains follow-up patches that e.g. fixes pinctrl driver >> and adds USB support. > > Perhaps these pinctrl patches should be included before the dts patch? > > Cc: Ye Zhang <ye.zhang@rock-chips.com> Oh, I just saw your pinctrl patches. Sorry for the noise. > >> >> Mainline U-Boot support can be tested using a branch at [3], it contains >> board support using same devicetree files extended with USB support. >> >> [1] https://wiki.luckfox.com/Luckfox-Lyra >> [2] https://github.com/Kwiboo/linux-rockchip/commits/next-20261116-rk3506 >> [3] https://git.u-boot-project.org/u-boot/contributors/kwiboo/u-boot/-/commits/rk3506 >> >> Jonas Karlman (8): >> dt-bindings: soc: rockchip: grf: Add RK3506 compatibles >> ARM: dts: rockchip: Add support for RK3506 >> dt-bindings: arm: rockchip: Add Luckfox Lyra and Lyra Plus >> ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards >> dt-bindings: arm: rockchip: Add Luckfox Lyra Ultra >> ARM: dts: rockchip: Add Luckfox Lyra Ultra board >> dt-bindings: arm: rockchip: Add Luckfox Lyra Zero W >> ARM: dts: rockchip: Add Luckfox Lyra Zero W board >> >> .../devicetree/bindings/arm/rockchip.yaml | 9 + >> .../devicetree/bindings/soc/rockchip/grf.yaml | 6 + >> arch/arm/boot/dts/rockchip/Makefile | 6 +- >> .../dts/rockchip/rk3506-luckfox-lyra-plus.dts | 31 + >> .../boot/dts/rockchip/rk3506-luckfox-lyra.dts | 9 + >> .../dts/rockchip/rk3506-luckfox-lyra.dtsi | 124 ++++ >> .../arm/boot/dts/rockchip/rk3506-pinctrl.dtsi | 576 ++++++++++++++++++ >> arch/arm/boot/dts/rockchip/rk3506.dtsi | 540 ++++++++++++++++ >> .../rockchip/rk3506b-luckfox-lyra-ultra.dts | 31 + >> .../rockchip/rk3506b-luckfox-lyra-zero-w.dts | 23 + >> .../dts/rockchip/rk3506b-luckfox-lyra.dtsi | 100 +++ >> 11 files changed, 1454 insertions(+), 1 deletion(-) >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506.dtsi >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi >> > -- Best, Chaoyi ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/8] ARM: dts: rockchip: Add Luckfox Lyra boards @ 2026-11-20 3:02 ` Chaoyi Chen 0 siblings, 0 replies; 25+ messages in thread From: Chaoyi Chen @ 2026-11-20 3:02 UTC (permalink / raw) To: Jonas Karlman, Heiko Stuebner, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: Ye Zhang, devicetree, linux-rockchip, linux-arm-kernel, linux-kernel On 11/20/2026 10:53 AM, Chaoyi Chen wrote: > Hi Jonas, > > On 11/19/2026 11:20 PM, Jonas Karlman wrote: >> This series adds initial devicetree for Rockchip RK3506 SoC and initial >> support for Luckfox Lyra board family [1]. >> >> The Luckfox Lyra board family use different RK3506 SoC variants, i.e. Lyra >> and Lyra Plus both use RK3506G2 and Lyra Ultra and Lyra Zero W both use the >> RK3506B varaiant. >> >> All board compatibles use rockchip,rk3506 in this revision of the series, >> maybe we should use rockchip,rk3506b for the RK3506B (and RK3506J) variants? >> >> The pinctrl driver for RK3506 will not work as-is using the SoC DT from this >> series. The already merged driver depends on a rockchip,ioc1 phandle prop >> that never was described in dt-bindings. The SoC DT in this series instead >> uses rockchip,grf in GPIO controller node to reference correct IOC for GPIO0 >> and GPIO1. >> >> The branch at [2] contains follow-up patches that e.g. fixes pinctrl driver >> and adds USB support. > > Perhaps these pinctrl patches should be included before the dts patch? > > Cc: Ye Zhang <ye.zhang@rock-chips.com> Oh, I just saw your pinctrl patches. Sorry for the noise. > >> >> Mainline U-Boot support can be tested using a branch at [3], it contains >> board support using same devicetree files extended with USB support. >> >> [1] https://wiki.luckfox.com/Luckfox-Lyra >> [2] https://github.com/Kwiboo/linux-rockchip/commits/next-20261116-rk3506 >> [3] https://git.u-boot-project.org/u-boot/contributors/kwiboo/u-boot/-/commits/rk3506 >> >> Jonas Karlman (8): >> dt-bindings: soc: rockchip: grf: Add RK3506 compatibles >> ARM: dts: rockchip: Add support for RK3506 >> dt-bindings: arm: rockchip: Add Luckfox Lyra and Lyra Plus >> ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards >> dt-bindings: arm: rockchip: Add Luckfox Lyra Ultra >> ARM: dts: rockchip: Add Luckfox Lyra Ultra board >> dt-bindings: arm: rockchip: Add Luckfox Lyra Zero W >> ARM: dts: rockchip: Add Luckfox Lyra Zero W board >> >> .../devicetree/bindings/arm/rockchip.yaml | 9 + >> .../devicetree/bindings/soc/rockchip/grf.yaml | 6 + >> arch/arm/boot/dts/rockchip/Makefile | 6 +- >> .../dts/rockchip/rk3506-luckfox-lyra-plus.dts | 31 + >> .../boot/dts/rockchip/rk3506-luckfox-lyra.dts | 9 + >> .../dts/rockchip/rk3506-luckfox-lyra.dtsi | 124 ++++ >> .../arm/boot/dts/rockchip/rk3506-pinctrl.dtsi | 576 ++++++++++++++++++ >> arch/arm/boot/dts/rockchip/rk3506.dtsi | 540 ++++++++++++++++ >> .../rockchip/rk3506b-luckfox-lyra-ultra.dts | 31 + >> .../rockchip/rk3506b-luckfox-lyra-zero-w.dts | 23 + >> .../dts/rockchip/rk3506b-luckfox-lyra.dtsi | 100 +++ >> 11 files changed, 1454 insertions(+), 1 deletion(-) >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra-plus.dts >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dts >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506-luckfox-lyra.dtsi >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506-pinctrl.dtsi >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506.dtsi >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-ultra.dts >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra-zero-w.dts >> create mode 100644 arch/arm/boot/dts/rockchip/rk3506b-luckfox-lyra.dtsi >> > -- Best, Chaoyi _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2026-11-20 15:21 UTC | newest] Thread overview: 25+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2026-11-19 15:20 [PATCH 0/8] ARM: dts: rockchip: Add Luckfox Lyra boards Jonas Karlman 2026-11-19 15:20 ` Jonas Karlman 2026-11-19 15:20 ` [PATCH 1/8] dt-bindings: soc: rockchip: grf: Add RK3506 compatibles Jonas Karlman 2026-11-19 15:20 ` Jonas Karlman 2026-11-19 15:20 ` [PATCH 2/8] ARM: dts: rockchip: Add support for RK3506 Jonas Karlman 2026-11-19 15:20 ` Jonas Karlman 2026-11-20 15:21 ` sashiko-bot 2026-11-19 15:20 ` [PATCH 3/8] dt-bindings: arm: rockchip: Add Luckfox Lyra and Lyra Plus Jonas Karlman 2026-11-19 15:20 ` Jonas Karlman 2026-11-19 15:20 ` [PATCH 4/8] ARM: dts: rockchip: Add Luckfox Lyra and Lyra Plus boards Jonas Karlman 2026-11-19 15:20 ` Jonas Karlman 2026-11-20 15:21 ` sashiko-bot 2026-11-19 15:20 ` [PATCH 5/8] dt-bindings: arm: rockchip: Add Luckfox Lyra Ultra Jonas Karlman 2026-11-19 15:20 ` Jonas Karlman 2026-11-19 15:20 ` [PATCH 6/8] ARM: dts: rockchip: Add Luckfox Lyra Ultra board Jonas Karlman 2026-11-19 15:20 ` Jonas Karlman 2026-11-19 15:20 ` [PATCH 7/8] dt-bindings: arm: rockchip: Add Luckfox Lyra Zero W Jonas Karlman 2026-11-19 15:20 ` Jonas Karlman 2026-11-19 15:20 ` [PATCH 8/8] ARM: dts: rockchip: Add Luckfox Lyra Zero W board Jonas Karlman 2026-11-19 15:20 ` Jonas Karlman 2026-11-20 15:21 ` sashiko-bot 2026-11-20 2:53 ` [PATCH 0/8] ARM: dts: rockchip: Add Luckfox Lyra boards Chaoyi Chen 2026-11-20 2:53 ` Chaoyi Chen 2026-11-20 3:02 ` Chaoyi Chen 2026-11-20 3:02 ` Chaoyi Chen
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.