Betr.: RE: [parisc-linux] visualize C360/785 install

Betr.: RE: [parisc-linux] visualize C360/785 install

[Jurriaan Kalkman]

>I've problems booting it from cd.
>Here is what I get
>
>HARD Booted.
>palo ipl 0.92 root@spqr Mon Jun 25 23:03:13 CEST 2001
>.........
>
>Kernel: partition 0 file /vmlinux
>Ramdisk: partition 0 file /ramdisk
>Warning: kernel name doesn't end with 32 or 64... Guessing 32
>ELF32 executable
>Entry 00100000 first 00100000 n 4
>Segment 0 load 00100000 size 1606948 mediaptr 0x1000
>Segment 1 load 0028a000 size 468472 mediaptr 0x18a000
>Segment 2 load 00300000 size 8192 mediaptr 0x1fd000
>Segment 3 load 0034bea8 size 80688 mediaptr 0x1ffea8
>Loading ramdisk 1991209 bytes @ 3fe09000...
>branching to kernel entry point 0x00100000
>Set default PSW W bit to 0
>
I have exactly the same problem with my C200, so you could look
op the thread 'Is a C200+ currently supported' where Brad tells
me to use the serial console, and why. I haven't yet gotten my
serial console to work, I have reason to believe I have a 1:1
serial cable, while I should have gotten an interlink cable.
The last message was send yesterday, so it isn't old yet.

Wether or not I need to set some options in the boot menu or
just have to unplug keyboard/mouse/monitor to get the serial
console is yet an open question.

Good luck,
Jurriaan