[PATCH 0/3] v5 Moorestown clock related patches

[PATCH 0/3] v5 Moorestown clock related patches

[Jacob Pan]

Besides fixes based on review of v4, one more patches is added to
make additional CPU feature available early enough for Moorestown clock
selection code. An x86_init.oem.setup_arch functin is added for Moorestown
so that we can use boot_cpu_data earlier. Other changes are minor.

Thanks,

*** BLURB HERE ***

Jacob Pan (3):
  x86: detect scattered cpuid features earlier
  x86/mrst: add cpu type detection
  x86/mrst: add more timer config options

 arch/x86/include/asm/apb_timer.h |    1 -
 arch/x86/include/asm/mrst.h      |   20 +++++++
 arch/x86/kernel/apb_timer.c      |   37 +++----------
 arch/x86/kernel/cpu/common.c     |    2 +-
 arch/x86/kernel/mrst.c           |  110 ++++++++++++++++++++++++++++++--------
 5 files changed, 116 insertions(+), 54 deletions(-)

[PATCH 1/3] x86: detect scattered cpuid features earlier

[Jacob Pan]

Some extra CPU features such as ARAT is needed in early boot so
that x86_init function pointers can be set up properly.
http://lkml.org/lkml/2010/5/18/519
At start_kernel() level, this patch moves init_scattered_cpuid_features()
from check_bugs() to setup_arch() -> early_cpu_init() which is earlier than
platform specific x86_init layer setup. Suggested by HPA.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/common.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 4868e4a..fe1e5d6 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -576,6 +576,7 @@ static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
 	if (c->extended_cpuid_level >= 0x80000007)
 		c->x86_power = cpuid_edx(0x80000007);
 
+	init_scattered_cpuid_features(c);
 }
 
 static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
@@ -731,7 +732,6 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 
 	get_model_name(c); /* Default name */
 
-	init_scattered_cpuid_features(c);
 	detect_nopl(c);
 }
 
-- 
1.6.3.3

[tip:x86/mrst] x86: detect scattered cpuid features earlier

[tip-bot for Jacob Pan]

Commit-ID:  1dedefd1a066a795a87afca9c0236e1a94de9bf6
Gitweb:     http://git.kernel.org/tip/1dedefd1a066a795a87afca9c0236e1a94de9bf6
Author:     Jacob Pan <jacob.jun.pan@linux.intel.com>
AuthorDate: Wed, 19 May 2010 12:01:23 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 19 May 2010 13:32:12 -0700

x86: detect scattered cpuid features earlier

Some extra CPU features such as ARAT is needed in early boot so
that x86_init function pointers can be set up properly.
http://lkml.org/lkml/2010/5/18/519
At start_kernel() level, this patch moves init_scattered_cpuid_features()
from check_bugs() to setup_arch() -> early_cpu_init() which is earlier than
platform specific x86_init layer setup. Suggested by HPA.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
LKML-Reference: <1274295685-6774-2-git-send-email-jacob.jun.pan@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/cpu/common.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index c1c00d0..284bf89 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -576,6 +576,7 @@ static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
 	if (c->extended_cpuid_level >= 0x80000007)
 		c->x86_power = cpuid_edx(0x80000007);
 
+	init_scattered_cpuid_features(c);
 }
 
 static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
@@ -731,7 +732,6 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 
 	get_model_name(c); /* Default name */
 
-	init_scattered_cpuid_features(c);
 	detect_nopl(c);
 }
 

[PATCH 2/3] x86/mrst: add cpu type detection

[Jacob Pan]

Medfield is the follow-up of Moorestown, it is treated under the same
HW sub-architecture. However, we do need to know the CPU type in order
for some of the driver to act accordingly.
We also have different optimal clock configuration for each CPU type.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
 arch/x86/include/asm/mrst.h |   19 +++++++++++++++++++
 arch/x86/kernel/mrst.c      |   26 ++++++++++++++++++++++++++
 2 files changed, 45 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index 451d30e..dc5c850 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -11,8 +11,27 @@
 #ifndef _ASM_X86_MRST_H
 #define _ASM_X86_MRST_H
 extern int pci_mrst_init(void);
+extern int mrst_identify_cpu(void);
 int __init sfi_parse_mrtc(struct sfi_table_header *table);
 
+/*
+ * Medfield is the follow-up of Moorestown, it combines two chip solution into
+ * one. Other than that it also added always-on and constant tsc and lapic
+ * timers. Medfield is the platform name, and the chip name is called Penwell
+ * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
+ * identified via MSRs.
+ */
+enum mrst_cpu_type {
+	MRST_CPU_CHIP_LINCROFT = 1,
+	MRST_CPU_CHIP_PENWELL,
+};
+
+enum mrst_timer_options {
+	MRST_TIMER_DEFAULT,
+	MRST_TIMER_APBT_ONLY,
+	MRST_TIMER_LAPIC_APBT,
+};
+
 #define SFI_MTMR_MAX_NUM 8
 #define SFI_MRTC_MAX	8
 
diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c
index 0aad867..248809a 100644
--- a/arch/x86/kernel/mrst.c
+++ b/arch/x86/kernel/mrst.c
@@ -27,6 +27,8 @@
 
 static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
 static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
+static int mrst_cpu_chip;
+
 int sfi_mtimer_num;
 
 struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
@@ -216,6 +218,28 @@ static void __init mrst_setup_boot_clock(void)
 		setup_boot_APIC_clock();
 };
 
+int mrst_identify_cpu(void)
+{
+	return mrst_cpu_chip;
+}
+EXPORT_SYMBOL_GPL(mrst_identify_cpu);
+
+void __cpuinit mrst_arch_setup(void)
+{
+	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
+		mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+	else if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x26)
+		mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
+	else {
+		pr_err("Unknown Moorestown CPU (%d:%d), default to Lincroft\n",
+			boot_cpu_data.x86, boot_cpu_data.x86_model);
+		mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
+	}
+	pr_debug("Moorestown CPU %s identified\n",
+		(mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) ?
+		"Lincroft" : "Penwell");
+}
+
 /*
  * Moorestown specific x86_init function overrides and early setup
  * calls.
@@ -230,6 +254,8 @@ void __init x86_mrst_early_setup(void)
 
 	x86_init.irqs.pre_vector_init = x86_init_noop;
 
+	x86_init.oem.arch_setup = mrst_arch_setup;
+
 	x86_cpuinit.setup_percpu_clockev = mrst_setup_secondary_clock;
 
 	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
-- 
1.6.3.3

[tip:x86/mrst] x86, mrst: add cpu type detection

[tip-bot for Jacob Pan]

Commit-ID:  a0c173bd8a3fd0541be8e4ef962170e48d8811c7
Gitweb:     http://git.kernel.org/tip/a0c173bd8a3fd0541be8e4ef962170e48d8811c7
Author:     Jacob Pan <jacob.jun.pan@linux.intel.com>
AuthorDate: Wed, 19 May 2010 12:01:24 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 19 May 2010 13:32:29 -0700

x86, mrst: add cpu type detection

Medfield is the follow-up of Moorestown, it is treated under the same
HW sub-architecture. However, we do need to know the CPU type in order
for some of the driver to act accordingly.
We also have different optimal clock configuration for each CPU type.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
LKML-Reference: <1274295685-6774-3-git-send-email-jacob.jun.pan@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/mrst.h |   19 +++++++++++++++++++
 arch/x86/kernel/mrst.c      |   26 ++++++++++++++++++++++++++
 2 files changed, 45 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index 451d30e..dc5c850 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -11,8 +11,27 @@
 #ifndef _ASM_X86_MRST_H
 #define _ASM_X86_MRST_H
 extern int pci_mrst_init(void);
+extern int mrst_identify_cpu(void);
 int __init sfi_parse_mrtc(struct sfi_table_header *table);
 
+/*
+ * Medfield is the follow-up of Moorestown, it combines two chip solution into
+ * one. Other than that it also added always-on and constant tsc and lapic
+ * timers. Medfield is the platform name, and the chip name is called Penwell
+ * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
+ * identified via MSRs.
+ */
+enum mrst_cpu_type {
+	MRST_CPU_CHIP_LINCROFT = 1,
+	MRST_CPU_CHIP_PENWELL,
+};
+
+enum mrst_timer_options {
+	MRST_TIMER_DEFAULT,
+	MRST_TIMER_APBT_ONLY,
+	MRST_TIMER_LAPIC_APBT,
+};
+
 #define SFI_MTMR_MAX_NUM 8
 #define SFI_MRTC_MAX	8
 
diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c
index e796448..ceaebeb 100644
--- a/arch/x86/kernel/mrst.c
+++ b/arch/x86/kernel/mrst.c
@@ -27,6 +27,8 @@
 
 static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
 static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
+static int mrst_cpu_chip;
+
 int sfi_mtimer_num;
 
 struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
@@ -216,6 +218,28 @@ static void __init mrst_setup_boot_clock(void)
 		setup_boot_APIC_clock();
 };
 
+int mrst_identify_cpu(void)
+{
+	return mrst_cpu_chip;
+}
+EXPORT_SYMBOL_GPL(mrst_identify_cpu);
+
+void __cpuinit mrst_arch_setup(void)
+{
+	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
+		mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+	else if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x26)
+		mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
+	else {
+		pr_err("Unknown Moorestown CPU (%d:%d), default to Lincroft\n",
+			boot_cpu_data.x86, boot_cpu_data.x86_model);
+		mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
+	}
+	pr_debug("Moorestown CPU %s identified\n",
+		(mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) ?
+		"Lincroft" : "Penwell");
+}
+
 /*
  * Moorestown specific x86_init function overrides and early setup
  * calls.
@@ -230,6 +254,8 @@ void __init x86_mrst_early_setup(void)
 
 	x86_init.irqs.pre_vector_init = x86_init_noop;
 
+	x86_init.oem.arch_setup = mrst_arch_setup;
+
 	x86_cpuinit.setup_percpu_clockev = mrst_setup_secondary_clock;
 
 	x86_platform.calibrate_tsc = mrst_calibrate_tsc;

[tip:x86/mrst] x86, mrst: make mrst_identify_cpu() an inline returning enum

[tip-bot for H. Peter Anvin]

Commit-ID:  a75af580bb1fd261bf63cc00e4b324e17ceb15cf
Gitweb:     http://git.kernel.org/tip/a75af580bb1fd261bf63cc00e4b324e17ceb15cf
Author:     H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Wed, 19 May 2010 13:40:14 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 19 May 2010 13:47:11 -0700

x86, mrst: make mrst_identify_cpu() an inline returning enum

We have an enum, might as well use it.  While we're at it, make it an
inline... there is really no point in calling a function for this
stuff.

LKML-Reference: <1274295685-6774-3-git-send-email-jacob.jun.pan@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
 arch/x86/include/asm/mrst.h |    7 ++++++-
 arch/x86/kernel/mrst.c      |   17 ++++++-----------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index 67ad315..1869c18 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -11,7 +11,6 @@
 #ifndef _ASM_X86_MRST_H
 #define _ASM_X86_MRST_H
 extern int pci_mrst_init(void);
-extern int mrst_identify_cpu(void);
 extern int mrst_timer_options __cpuinitdata;
 int __init sfi_parse_mrtc(struct sfi_table_header *table);
 
@@ -27,6 +26,12 @@ enum mrst_cpu_type {
 	MRST_CPU_CHIP_PENWELL,
 };
 
+extern enum mrst_cpu_type __mrst_cpu_chip;
+static enum mrst_cpu_type mrst_identify_cpu(void)
+{
+	return __mrst_cpu_chip;
+}
+
 enum mrst_timer_options {
 	MRST_TIMER_DEFAULT,
 	MRST_TIMER_APBT_ONLY,
diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c
index 636b53b..967f268 100644
--- a/arch/x86/kernel/mrst.c
+++ b/arch/x86/kernel/mrst.c
@@ -50,7 +50,8 @@ int mrst_timer_options __cpuinitdata;
 
 static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
 static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
-static int mrst_cpu_chip;
+enum mrst_cpu_type __mrst_cpu_chip;
+EXPORT_SYMBOL_GPL(__mrst_cpu_chip);
 
 int sfi_mtimer_num;
 
@@ -233,25 +234,19 @@ void __init mrst_rtc_init(void)
 	sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
 }
 
-int mrst_identify_cpu(void)
-{
-	return mrst_cpu_chip;
-}
-EXPORT_SYMBOL_GPL(mrst_identify_cpu);
-
 void __cpuinit mrst_arch_setup(void)
 {
 	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
-		mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
 	else if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x26)
-		mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
+		__mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
 	else {
 		pr_err("Unknown Moorestown CPU (%d:%d), default to Lincroft\n",
 			boot_cpu_data.x86, boot_cpu_data.x86_model);
-		mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
+		__mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
 	}
 	pr_debug("Moorestown CPU %s identified\n",
-		(mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) ?
+		(__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) ?
 		"Lincroft" : "Penwell");
 }
 

[tip:x86/mrst] x86, mrst: A function in a header file needs to be marked "inline"

[tip-bot for H. Peter Anvin]

Commit-ID:  55572b293b3a5929e8c54bc91d14ae6264186bf6
Gitweb:     http://git.kernel.org/tip/55572b293b3a5929e8c54bc91d14ae6264186bf6
Author:     H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Thu, 7 Oct 2010 16:42:54 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 7 Oct 2010 16:45:18 -0700

x86, mrst: A function in a header file needs to be marked "inline"

A function in a header file needs to be explicitly marked "inline", or
gcc will complain if it is not used.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: <stable@kernel.org> v2.6.36
LKML-Reference: <1274295685-6774-3-git-send-email-jacob.jun.pan@linux.intel.com>
---
 arch/x86/include/asm/mrst.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index 1635074..33fc296 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -26,7 +26,7 @@ enum mrst_cpu_type {
 };
 
 extern enum mrst_cpu_type __mrst_cpu_chip;
-static enum mrst_cpu_type mrst_identify_cpu(void)
+static inline enum mrst_cpu_type mrst_identify_cpu(void)
 {
 	return __mrst_cpu_chip;
 }

[PATCH 3/3] x86/mrst: add more timer config options

[Jacob Pan]

Always-on local APIC timer (ARAT) has been introduced to Medfield, along
with the platform APB timers we have more timer configuration options
between Moorestown and Medfield.

This patch adds run-time detection of avaiable timer features so that
we can treat Medfield as a variant of Moorestown and set up the optimal
timer options for each platform. i.e.

Medfield: per cpu always-on local APIC timer
Moorestown: per cpu APB timer

Manual override is possible via cmdline option x86_mrst_timer.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
 arch/x86/include/asm/apb_timer.h |    1 -
 arch/x86/include/asm/mrst.h      |    1 +
 arch/x86/kernel/apb_timer.c      |   37 +++------------
 arch/x86/kernel/mrst.c           |   88 +++++++++++++++++++++++++++-----------
 4 files changed, 72 insertions(+), 55 deletions(-)

diff --git a/arch/x86/include/asm/apb_timer.h b/arch/x86/include/asm/apb_timer.h
index c74a2ee..a69b1ac 100644
--- a/arch/x86/include/asm/apb_timer.h
+++ b/arch/x86/include/asm/apb_timer.h
@@ -55,7 +55,6 @@ extern unsigned long apbt_quick_calibrate(void);
 extern int arch_setup_apbt_irqs(int irq, int trigger, int mask, int cpu);
 extern void apbt_setup_secondary_clock(void);
 extern unsigned int boot_cpu_id;
-extern int disable_apbt_percpu;
 
 extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint);
 extern void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr);
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index dc5c850..67ad315 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -12,6 +12,7 @@
 #define _ASM_X86_MRST_H
 extern int pci_mrst_init(void);
 extern int mrst_identify_cpu(void);
+extern int mrst_timer_options __cpuinitdata;
 int __init sfi_parse_mrtc(struct sfi_table_header *table);
 
 /*
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index a353475..8dd7780 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -43,10 +43,11 @@
 
 #include <asm/fixmap.h>
 #include <asm/apb_timer.h>
+#include <asm/mrst.h>
 
 #define APBT_MASK			CLOCKSOURCE_MASK(32)
 #define APBT_SHIFT			22
-#define APBT_CLOCKEVENT_RATING		150
+#define APBT_CLOCKEVENT_RATING		110
 #define APBT_CLOCKSOURCE_RATING		250
 #define APBT_MIN_DELTA_USEC		200
 
@@ -83,8 +84,6 @@ struct apbt_dev {
 	char name[10];
 };
 
-int disable_apbt_percpu __cpuinitdata;
-
 static DEFINE_PER_CPU(struct apbt_dev, cpu_apbt_dev);
 
 #ifdef CONFIG_SMP
@@ -195,29 +194,6 @@ static struct clock_event_device apbt_clockevent = {
 };
 
 /*
- * if user does not want to use per CPU apb timer, just give it a lower rating
- * than local apic timer and skip the late per cpu timer init.
- */
-static inline int __init setup_x86_mrst_timer(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	if (strcmp("apbt_only", arg) == 0)
-		disable_apbt_percpu = 0;
-	else if (strcmp("lapic_and_apbt", arg) == 0)
-		disable_apbt_percpu = 1;
-	else {
-		pr_warning("X86 MRST timer option %s not recognised"
-			   " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
-			   arg);
-		return -EINVAL;
-	}
-	return 0;
-}
-__setup("x86_mrst_timer=", setup_x86_mrst_timer);
-
-/*
  * start count down from 0xffff_ffff. this is done by toggling the enable bit
  * then load initial load count to ~0.
  */
@@ -335,7 +311,7 @@ static int __init apbt_clockevent_register(void)
 	adev->num = smp_processor_id();
 	memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device));
 
-	if (disable_apbt_percpu) {
+	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
 		apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100;
 		global_clock_event = &adev->evt;
 		printk(KERN_DEBUG "%s clockevent registered as global\n",
@@ -429,7 +405,8 @@ static int apbt_cpuhp_notify(struct notifier_block *n,
 
 static __init int apbt_late_init(void)
 {
-	if (disable_apbt_percpu || !apb_timer_block_enabled)
+	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT ||
+		!apb_timer_block_enabled)
 		return 0;
 	/* This notifier should be called after workqueue is ready */
 	hotcpu_notifier(apbt_cpuhp_notify, -20);
@@ -450,6 +427,8 @@ static void apbt_set_mode(enum clock_event_mode mode,
 	int timer_num;
 	struct apbt_dev *adev = EVT_TO_APBT_DEV(evt);
 
+	BUG_ON(!apbt_virt_address);
+
 	timer_num = adev->num;
 	pr_debug("%s CPU %d timer %d mode=%d\n",
 		 __func__, first_cpu(*evt->cpumask), timer_num, mode);
@@ -676,7 +655,7 @@ void __init apbt_time_init(void)
 	}
 #ifdef CONFIG_SMP
 	/* kernel cmdline disable apb timer, so we will use lapic timers */
-	if (disable_apbt_percpu) {
+	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
 		printk(KERN_INFO "apbt: disabled per cpu timer\n");
 		return;
 	}
diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c
index 248809a..469b6db 100644
--- a/arch/x86/kernel/mrst.c
+++ b/arch/x86/kernel/mrst.c
@@ -25,6 +25,29 @@
 #include <asm/i8259.h>
 #include <asm/apb_timer.h>
 
+/*
+ * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
+ * cmdline option x86_mrst_timer can be used to override the configuration
+ * to prefer one or the other.
+ * at runtime, there are basically three timer configurations:
+ * 1. per cpu apbt clock only
+ * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only
+ * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast.
+ *
+ * by default (without cmdline option), platform code first detects cpu type
+ * to see if we are on lincroft or penwell, then set up both lapic or apbt
+ * clocks accordingly.
+ * i.e. by default, medfield uses configuration #2, moorestown uses #1.
+ * config #3 is supported but not recommended on medfield.
+ *
+ * rating and feature summary:
+ * lapic (with C3STOP) --------- 100
+ * apbt (always-on) ------------ 110
+ * lapic (always-on,ARAT) ------ 150
+ */
+
+int mrst_timer_options __cpuinitdata;
+
 static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
 static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
 static int mrst_cpu_chip;
@@ -169,18 +192,6 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
 	return 0;
 }
 
-/*
- * the secondary clock in Moorestown can be APBT or LAPIC clock, default to
- * APBT but cmdline option can also override it.
- */
-static void __cpuinit mrst_setup_secondary_clock(void)
-{
-	/* restore default lapic clock if disabled by cmdline */
-	if (disable_apbt_percpu)
-		return setup_secondary_APIC_clock();
-	apbt_setup_secondary_clock();
-}
-
 static unsigned long __init mrst_calibrate_tsc(void)
 {
 	unsigned long flags, fast_calibrate;
@@ -197,6 +208,21 @@ static unsigned long __init mrst_calibrate_tsc(void)
 
 void __init mrst_time_init(void)
 {
+	switch (mrst_timer_options) {
+	case MRST_TIMER_APBT_ONLY:
+		break;
+	case MRST_TIMER_LAPIC_APBT:
+		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
+		break;
+	default:
+		if (!boot_cpu_has(X86_FEATURE_ARAT))
+			break;
+		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
+		return;
+	}
+	/* we need at least one APB timer */
 	sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
 	pre_init_apic_IRQ0();
 	apbt_time_init();
@@ -207,17 +233,6 @@ void __init mrst_rtc_init(void)
 	sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
 }
 
-/*
- * if we use per cpu apb timer, the bootclock already setup. if we use lapic
- * timer and one apbt timer for broadcast, we need to set up lapic boot clock.
- */
-static void __init mrst_setup_boot_clock(void)
-{
-	pr_info("%s: per cpu apbt flag %d \n", __func__, disable_apbt_percpu);
-	if (disable_apbt_percpu)
-		setup_boot_APIC_clock();
-};
-
 int mrst_identify_cpu(void)
 {
 	return mrst_cpu_chip;
@@ -250,13 +265,13 @@ void __init x86_mrst_early_setup(void)
 	x86_init.resources.reserve_resources = x86_init_noop;
 
 	x86_init.timers.timer_init = mrst_time_init;
-	x86_init.timers.setup_percpu_clockev = mrst_setup_boot_clock;
+	x86_init.timers.setup_percpu_clockev = x86_init_noop;
 
 	x86_init.irqs.pre_vector_init = x86_init_noop;
 
 	x86_init.oem.arch_setup = mrst_arch_setup;
 
-	x86_cpuinit.setup_percpu_clockev = mrst_setup_secondary_clock;
+	x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
 
 	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
 	x86_init.pci.init = pci_mrst_init;
@@ -264,3 +279,26 @@ void __init x86_mrst_early_setup(void)
 
 	legacy_pic = &null_legacy_pic;
 }
+
+/*
+ * if user does not want to use per CPU apb timer, just give it a lower rating
+ * than local apic timer and skip the late per cpu timer init.
+ */
+static inline int __init setup_x86_mrst_timer(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	if (strcmp("apbt_only", arg) == 0)
+		mrst_timer_options = MRST_TIMER_APBT_ONLY;
+	else if (strcmp("lapic_and_apbt", arg) == 0)
+		mrst_timer_options = MRST_TIMER_LAPIC_APBT;
+	else {
+		pr_warning("X86 MRST timer option %s not recognised"
+			   " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
+			   arg);
+		return -EINVAL;
+	}
+	return 0;
+}
+__setup("x86_mrst_timer=", setup_x86_mrst_timer);
-- 
1.6.3.3

[tip:x86/mrst] x86, mrst: add more timer config options

[tip-bot for Jacob Pan]

Commit-ID:  a875c01944f0d750eeb1ef3133feceb13f13c4b3
Gitweb:     http://git.kernel.org/tip/a875c01944f0d750eeb1ef3133feceb13f13c4b3
Author:     Jacob Pan <jacob.jun.pan@linux.intel.com>
AuthorDate: Wed, 19 May 2010 12:01:25 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 19 May 2010 13:45:39 -0700

x86, mrst: add more timer config options

Always-on local APIC timer (ARAT) has been introduced to Medfield, along
with the platform APB timers we have more timer configuration options
between Moorestown and Medfield.

This patch adds run-time detection of avaiable timer features so that
we can treat Medfield as a variant of Moorestown and set up the optimal
timer options for each platform. i.e.

Medfield: per cpu always-on local APIC timer
Moorestown: per cpu APB timer

Manual override is possible via cmdline option x86_mrst_timer.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
LKML-Reference: <1274295685-6774-4-git-send-email-jacob.jun.pan@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/apb_timer.h |    1 -
 arch/x86/include/asm/mrst.h      |    1 +
 arch/x86/kernel/apb_timer.c      |   37 +++------------
 arch/x86/kernel/mrst.c           |   88 +++++++++++++++++++++++++++-----------
 4 files changed, 72 insertions(+), 55 deletions(-)

diff --git a/arch/x86/include/asm/apb_timer.h b/arch/x86/include/asm/apb_timer.h
index c74a2ee..a69b1ac 100644
--- a/arch/x86/include/asm/apb_timer.h
+++ b/arch/x86/include/asm/apb_timer.h
@@ -55,7 +55,6 @@ extern unsigned long apbt_quick_calibrate(void);
 extern int arch_setup_apbt_irqs(int irq, int trigger, int mask, int cpu);
 extern void apbt_setup_secondary_clock(void);
 extern unsigned int boot_cpu_id;
-extern int disable_apbt_percpu;
 
 extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint);
 extern void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr);
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index dc5c850..67ad315 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -12,6 +12,7 @@
 #define _ASM_X86_MRST_H
 extern int pci_mrst_init(void);
 extern int mrst_identify_cpu(void);
+extern int mrst_timer_options __cpuinitdata;
 int __init sfi_parse_mrtc(struct sfi_table_header *table);
 
 /*
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index a353475..8dd7780 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -43,10 +43,11 @@
 
 #include <asm/fixmap.h>
 #include <asm/apb_timer.h>
+#include <asm/mrst.h>
 
 #define APBT_MASK			CLOCKSOURCE_MASK(32)
 #define APBT_SHIFT			22
-#define APBT_CLOCKEVENT_RATING		150
+#define APBT_CLOCKEVENT_RATING		110
 #define APBT_CLOCKSOURCE_RATING		250
 #define APBT_MIN_DELTA_USEC		200
 
@@ -83,8 +84,6 @@ struct apbt_dev {
 	char name[10];
 };
 
-int disable_apbt_percpu __cpuinitdata;
-
 static DEFINE_PER_CPU(struct apbt_dev, cpu_apbt_dev);
 
 #ifdef CONFIG_SMP
@@ -195,29 +194,6 @@ static struct clock_event_device apbt_clockevent = {
 };
 
 /*
- * if user does not want to use per CPU apb timer, just give it a lower rating
- * than local apic timer and skip the late per cpu timer init.
- */
-static inline int __init setup_x86_mrst_timer(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	if (strcmp("apbt_only", arg) == 0)
-		disable_apbt_percpu = 0;
-	else if (strcmp("lapic_and_apbt", arg) == 0)
-		disable_apbt_percpu = 1;
-	else {
-		pr_warning("X86 MRST timer option %s not recognised"
-			   " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
-			   arg);
-		return -EINVAL;
-	}
-	return 0;
-}
-__setup("x86_mrst_timer=", setup_x86_mrst_timer);
-
-/*
  * start count down from 0xffff_ffff. this is done by toggling the enable bit
  * then load initial load count to ~0.
  */
@@ -335,7 +311,7 @@ static int __init apbt_clockevent_register(void)
 	adev->num = smp_processor_id();
 	memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device));
 
-	if (disable_apbt_percpu) {
+	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
 		apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100;
 		global_clock_event = &adev->evt;
 		printk(KERN_DEBUG "%s clockevent registered as global\n",
@@ -429,7 +405,8 @@ static int apbt_cpuhp_notify(struct notifier_block *n,
 
 static __init int apbt_late_init(void)
 {
-	if (disable_apbt_percpu || !apb_timer_block_enabled)
+	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT ||
+		!apb_timer_block_enabled)
 		return 0;
 	/* This notifier should be called after workqueue is ready */
 	hotcpu_notifier(apbt_cpuhp_notify, -20);
@@ -450,6 +427,8 @@ static void apbt_set_mode(enum clock_event_mode mode,
 	int timer_num;
 	struct apbt_dev *adev = EVT_TO_APBT_DEV(evt);
 
+	BUG_ON(!apbt_virt_address);
+
 	timer_num = adev->num;
 	pr_debug("%s CPU %d timer %d mode=%d\n",
 		 __func__, first_cpu(*evt->cpumask), timer_num, mode);
@@ -676,7 +655,7 @@ void __init apbt_time_init(void)
 	}
 #ifdef CONFIG_SMP
 	/* kernel cmdline disable apb timer, so we will use lapic timers */
-	if (disable_apbt_percpu) {
+	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
 		printk(KERN_INFO "apbt: disabled per cpu timer\n");
 		return;
 	}
diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c
index ceaebeb..636b53b 100644
--- a/arch/x86/kernel/mrst.c
+++ b/arch/x86/kernel/mrst.c
@@ -25,6 +25,29 @@
 #include <asm/i8259.h>
 #include <asm/apb_timer.h>
 
+/*
+ * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
+ * cmdline option x86_mrst_timer can be used to override the configuration
+ * to prefer one or the other.
+ * at runtime, there are basically three timer configurations:
+ * 1. per cpu apbt clock only
+ * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only
+ * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast.
+ *
+ * by default (without cmdline option), platform code first detects cpu type
+ * to see if we are on lincroft or penwell, then set up both lapic or apbt
+ * clocks accordingly.
+ * i.e. by default, medfield uses configuration #2, moorestown uses #1.
+ * config #3 is supported but not recommended on medfield.
+ *
+ * rating and feature summary:
+ * lapic (with C3STOP) --------- 100
+ * apbt (always-on) ------------ 110
+ * lapic (always-on,ARAT) ------ 150
+ */
+
+int mrst_timer_options __cpuinitdata;
+
 static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
 static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
 static int mrst_cpu_chip;
@@ -169,18 +192,6 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
 	return 0;
 }
 
-/*
- * the secondary clock in Moorestown can be APBT or LAPIC clock, default to
- * APBT but cmdline option can also override it.
- */
-static void __cpuinit mrst_setup_secondary_clock(void)
-{
-	/* restore default lapic clock if disabled by cmdline */
-	if (disable_apbt_percpu)
-		return setup_secondary_APIC_clock();
-	apbt_setup_secondary_clock();
-}
-
 static unsigned long __init mrst_calibrate_tsc(void)
 {
 	unsigned long flags, fast_calibrate;
@@ -197,6 +208,21 @@ static unsigned long __init mrst_calibrate_tsc(void)
 
 void __init mrst_time_init(void)
 {
+	switch (mrst_timer_options) {
+	case MRST_TIMER_APBT_ONLY:
+		break;
+	case MRST_TIMER_LAPIC_APBT:
+		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
+		break;
+	default:
+		if (!boot_cpu_has(X86_FEATURE_ARAT))
+			break;
+		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
+		return;
+	}
+	/* we need at least one APB timer */
 	sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
 	pre_init_apic_IRQ0();
 	apbt_time_init();
@@ -207,17 +233,6 @@ void __init mrst_rtc_init(void)
 	sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
 }
 
-/*
- * if we use per cpu apb timer, the bootclock already setup. if we use lapic
- * timer and one apbt timer for broadcast, we need to set up lapic boot clock.
- */
-static void __init mrst_setup_boot_clock(void)
-{
-	pr_info("%s: per cpu apbt flag %d \n", __func__, disable_apbt_percpu);
-	if (disable_apbt_percpu)
-		setup_boot_APIC_clock();
-};
-
 int mrst_identify_cpu(void)
 {
 	return mrst_cpu_chip;
@@ -250,13 +265,13 @@ void __init x86_mrst_early_setup(void)
 	x86_init.resources.reserve_resources = x86_init_noop;
 
 	x86_init.timers.timer_init = mrst_time_init;
-	x86_init.timers.setup_percpu_clockev = mrst_setup_boot_clock;
+	x86_init.timers.setup_percpu_clockev = x86_init_noop;
 
 	x86_init.irqs.pre_vector_init = x86_init_noop;
 
 	x86_init.oem.arch_setup = mrst_arch_setup;
 
-	x86_cpuinit.setup_percpu_clockev = mrst_setup_secondary_clock;
+	x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
 
 	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
 	x86_init.pci.init = pci_mrst_init;
@@ -269,3 +284,26 @@ void __init x86_mrst_early_setup(void)
 	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
 
 }
+
+/*
+ * if user does not want to use per CPU apb timer, just give it a lower rating
+ * than local apic timer and skip the late per cpu timer init.
+ */
+static inline int __init setup_x86_mrst_timer(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	if (strcmp("apbt_only", arg) == 0)
+		mrst_timer_options = MRST_TIMER_APBT_ONLY;
+	else if (strcmp("lapic_and_apbt", arg) == 0)
+		mrst_timer_options = MRST_TIMER_LAPIC_APBT;
+	else {
+		pr_warning("X86 MRST timer option %s not recognised"
+			   " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
+			   arg);
+		return -EINVAL;
+	}
+	return 0;
+}
+__setup("x86_mrst_timer=", setup_x86_mrst_timer);

[tip:x86/mrst] x86, mrst: make mrst_timer_options an enum

[tip-bot for H. Peter Anvin]

Commit-ID:  14671386dcbafb3086bbda3cb6f9f27d34c7bf6d
Gitweb:     http://git.kernel.org/tip/14671386dcbafb3086bbda3cb6f9f27d34c7bf6d
Author:     H. Peter Anvin <hpa@linux.intel.com>
AuthorDate: Wed, 19 May 2010 14:37:40 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Wed, 19 May 2010 14:37:40 -0700

x86, mrst: make mrst_timer_options an enum

We have an enum mrst_timer_options, use it so that the kernel knows if
we're missing something from a switch statement or equivalent.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <1274295685-6774-4-git-send-email-jacob.jun.pan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
 arch/x86/include/asm/mrst.h |    3 ++-
 arch/x86/kernel/mrst.c      |    2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index 1869c18..1635074 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -11,7 +11,6 @@
 #ifndef _ASM_X86_MRST_H
 #define _ASM_X86_MRST_H
 extern int pci_mrst_init(void);
-extern int mrst_timer_options __cpuinitdata;
 int __init sfi_parse_mrtc(struct sfi_table_header *table);
 
 /*
@@ -38,6 +37,8 @@ enum mrst_timer_options {
 	MRST_TIMER_LAPIC_APBT,
 };
 
+extern enum mrst_timer_options mrst_timer_options;
+
 #define SFI_MTMR_MAX_NUM 8
 #define SFI_MRTC_MAX	8
 
diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c
index 967f268..7ee4ed9 100644
--- a/arch/x86/kernel/mrst.c
+++ b/arch/x86/kernel/mrst.c
@@ -46,7 +46,7 @@
  * lapic (always-on,ARAT) ------ 150
  */
 
-int mrst_timer_options __cpuinitdata;
+__cpuinitdata enum mrst_timer_options mrst_timer_options;
 
 static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
 static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];