From: tip-bot for Borislav Petkov <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: toshi.kani@hp.com, hpa@zytor.com, mcgrof@suse.com,
linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
linux-mm@kvack.org, luto@amacapital.net, tglx@linutronix.de,
bp@suse.de, mingo@kernel.org, torvalds@linux-foundation.org,
peterz@infradead.org
Subject: [tip:x86/mm] x86/mm/pat: Untangle pat_init()
Date: Sun, 7 Jun 2015 10:39:22 -0700 [thread overview]
Message-ID: <tip-9dac6290945142e6b87d9f027edfee676dcfbfda@git.kernel.org> (raw)
In-Reply-To: <1433436928-31903-2-git-send-email-bp@alien8.de>
Commit-ID: 9dac6290945142e6b87d9f027edfee676dcfbfda
Gitweb: http://git.kernel.org/tip/9dac6290945142e6b87d9f027edfee676dcfbfda
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Thu, 4 Jun 2015 18:55:09 +0200
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Sun, 7 Jun 2015 15:28:52 +0200
x86/mm/pat: Untangle pat_init()
Split it into a BSP and AP version which makes the PAT
initialization path actually readable again.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/mm/pat.c | 69 ++++++++++++++++++++++++++++++++-----------------------
1 file changed, 40 insertions(+), 29 deletions(-)
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index a1c9654..476d078 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -36,6 +36,8 @@
#undef pr_fmt
#define pr_fmt(fmt) "" fmt
+static bool boot_cpu_done;
+
static int __read_mostly __pat_enabled = IS_ENABLED(CONFIG_X86_PAT);
static inline void pat_disable(const char *reason)
@@ -194,31 +196,47 @@ void pat_init_cache_modes(void)
#define PAT(x, y) ((u64)PAT_ ## y << ((x)*8))
-void pat_init(void)
+static void pat_bsp_init(u64 pat)
{
- u64 pat;
- bool boot_cpu = !boot_pat_state;
+ if (!cpu_has_pat) {
+ pat_disable("PAT not supported by CPU.");
+ return;
+ }
- if (!pat_enabled())
+ rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
+ if (!boot_pat_state) {
+ pat_disable("PAT MSR is 0, disabled.");
return;
+ }
+ wrmsrl(MSR_IA32_CR_PAT, pat);
+
+ pat_init_cache_modes();
+}
+
+static void pat_ap_init(u64 pat)
+{
if (!cpu_has_pat) {
- if (!boot_pat_state) {
- pat_disable("PAT not supported by CPU.");
- return;
- } else {
- /*
- * If this happens we are on a secondary CPU, but
- * switched to PAT on the boot CPU. We have no way to
- * undo PAT.
- */
- pr_err("x86/PAT: PAT enabled, but not supported by secondary CPU\n");
- BUG();
- }
+ /*
+ * If this happens we are on a secondary CPU, but switched to
+ * PAT on the boot CPU. We have no way to undo PAT.
+ */
+ panic("x86/PAT: PAT enabled, but not supported by secondary CPU\n");
}
- /* Set PWT to Write-Combining. All other bits stay the same */
+ wrmsrl(MSR_IA32_CR_PAT, pat);
+}
+
+void pat_init(void)
+{
+ u64 pat;
+
+ if (!pat_enabled())
+ return;
+
/*
+ * Set PWT to Write-Combining. All other bits stay the same:
+ *
* PTE encoding used in Linux:
* PAT
* |PCD
@@ -233,19 +251,12 @@ void pat_init(void)
pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC);
- /* Boot CPU check */
- if (!boot_pat_state) {
- rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
- if (!boot_pat_state) {
- pat_disable("PAT read returns always zero, disabled.");
- return;
- }
+ if (!boot_cpu_done) {
+ pat_bsp_init(pat);
+ boot_cpu_done = true;
+ } else {
+ pat_ap_init(pat);
}
-
- wrmsrl(MSR_IA32_CR_PAT, pat);
-
- if (boot_cpu)
- pat_init_cache_modes();
}
#undef PAT
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
WARNING: multiple messages have this Message-ID (diff)
From: tip-bot for Borislav Petkov <tipbot@zytor.com>
To: linux-tip-commits@vger.kernel.org
Cc: toshi.kani@hp.com, hpa@zytor.com, mcgrof@suse.com,
linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
linux-mm@kvack.org, luto@amacapital.net, tglx@linutronix.de,
bp@suse.de, mingo@kernel.org, torvalds@linux-foundation.org,
peterz@infradead.org
Subject: [tip:x86/mm] x86/mm/pat: Untangle pat_init()
Date: Sun, 7 Jun 2015 10:39:22 -0700 [thread overview]
Message-ID: <tip-9dac6290945142e6b87d9f027edfee676dcfbfda@git.kernel.org> (raw)
In-Reply-To: <1433436928-31903-2-git-send-email-bp@alien8.de>
Commit-ID: 9dac6290945142e6b87d9f027edfee676dcfbfda
Gitweb: http://git.kernel.org/tip/9dac6290945142e6b87d9f027edfee676dcfbfda
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Thu, 4 Jun 2015 18:55:09 +0200
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Sun, 7 Jun 2015 15:28:52 +0200
x86/mm/pat: Untangle pat_init()
Split it into a BSP and AP version which makes the PAT
initialization path actually readable again.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-2-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/mm/pat.c | 69 ++++++++++++++++++++++++++++++++-----------------------
1 file changed, 40 insertions(+), 29 deletions(-)
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index a1c9654..476d078 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -36,6 +36,8 @@
#undef pr_fmt
#define pr_fmt(fmt) "" fmt
+static bool boot_cpu_done;
+
static int __read_mostly __pat_enabled = IS_ENABLED(CONFIG_X86_PAT);
static inline void pat_disable(const char *reason)
@@ -194,31 +196,47 @@ void pat_init_cache_modes(void)
#define PAT(x, y) ((u64)PAT_ ## y << ((x)*8))
-void pat_init(void)
+static void pat_bsp_init(u64 pat)
{
- u64 pat;
- bool boot_cpu = !boot_pat_state;
+ if (!cpu_has_pat) {
+ pat_disable("PAT not supported by CPU.");
+ return;
+ }
- if (!pat_enabled())
+ rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
+ if (!boot_pat_state) {
+ pat_disable("PAT MSR is 0, disabled.");
return;
+ }
+ wrmsrl(MSR_IA32_CR_PAT, pat);
+
+ pat_init_cache_modes();
+}
+
+static void pat_ap_init(u64 pat)
+{
if (!cpu_has_pat) {
- if (!boot_pat_state) {
- pat_disable("PAT not supported by CPU.");
- return;
- } else {
- /*
- * If this happens we are on a secondary CPU, but
- * switched to PAT on the boot CPU. We have no way to
- * undo PAT.
- */
- pr_err("x86/PAT: PAT enabled, but not supported by secondary CPU\n");
- BUG();
- }
+ /*
+ * If this happens we are on a secondary CPU, but switched to
+ * PAT on the boot CPU. We have no way to undo PAT.
+ */
+ panic("x86/PAT: PAT enabled, but not supported by secondary CPU\n");
}
- /* Set PWT to Write-Combining. All other bits stay the same */
+ wrmsrl(MSR_IA32_CR_PAT, pat);
+}
+
+void pat_init(void)
+{
+ u64 pat;
+
+ if (!pat_enabled())
+ return;
+
/*
+ * Set PWT to Write-Combining. All other bits stay the same:
+ *
* PTE encoding used in Linux:
* PAT
* |PCD
@@ -233,19 +251,12 @@ void pat_init(void)
pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC);
- /* Boot CPU check */
- if (!boot_pat_state) {
- rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
- if (!boot_pat_state) {
- pat_disable("PAT read returns always zero, disabled.");
- return;
- }
+ if (!boot_cpu_done) {
+ pat_bsp_init(pat);
+ boot_cpu_done = true;
+ } else {
+ pat_ap_init(pat);
}
-
- wrmsrl(MSR_IA32_CR_PAT, pat);
-
- if (boot_cpu)
- pat_init_cache_modes();
}
#undef PAT
next prev parent reply other threads:[~2015-06-07 17:40 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-04 16:55 [PATCH 00/20] tip queue 2015-06-04 Borislav Petkov
2015-06-04 16:55 ` [PATCH 01/20] x86/mm/pat: Untangle pat_init() Borislav Petkov
2015-06-07 17:39 ` tip-bot for Borislav Petkov [this message]
2015-06-07 17:39 ` [tip:x86/mm] " tip-bot for Borislav Petkov
2015-06-04 16:55 ` [PATCH 02/20] x86/mm/pat: Emulate PAT when it is disabled Borislav Petkov
2015-06-07 17:39 ` [tip:x86/mm] " tip-bot for Borislav Petkov
2015-06-07 17:39 ` tip-bot for Borislav Petkov
2015-06-04 16:55 ` [PATCH 03/20] x86/mm/pat: Remove pat_enabled() checks Borislav Petkov
2015-06-07 17:40 ` [tip:x86/mm] " tip-bot for Borislav Petkov
2015-06-07 17:40 ` tip-bot for Borislav Petkov
2015-06-04 16:55 ` [PATCH 04/20] x86/mm/pat: Use 7th PAT MSR slot for Write-Through PAT type Borislav Petkov
2015-06-04 16:55 ` [PATCH 05/20] x86/mm/pat: Change reserve_memtype() for Write-Through type Borislav Petkov
2015-06-07 17:40 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-07 17:40 ` tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 06/20] x86/mm: Teach is_new_memtype_allowed() about " Borislav Petkov
2015-06-07 17:41 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-07 17:41 ` tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 07/20] x86/mm, asm-generic: Add ioremap_wt() for creating Write-Through mappings Borislav Petkov
2015-06-07 17:41 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-07 17:41 ` tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 08/20] arch/*/io.h: Add ioremap_wt() to all architectures Borislav Petkov
2015-06-07 17:41 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-07 17:41 ` tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 09/20] video/fbdev, asm/io.h: Remove ioremap_writethrough() Borislav Petkov
2015-06-07 17:41 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-07 17:41 ` tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 10/20] x86/mm/pat: Add pgprot_writethrough() Borislav Petkov
2015-06-07 17:42 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-07 17:42 ` tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 11/20] x86/mm/pat: Extend set_page_memtype() to support Write-Through type Borislav Petkov
2015-06-07 17:42 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-07 17:42 ` tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 12/20] x86/mm: Add set_memory_wt() for " Borislav Petkov
2015-06-07 17:42 ` [tip:x86/mm] x86/mm/pat: " tip-bot for Toshi Kani
2015-06-07 17:42 ` tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 13/20] drivers/block/pmem: Map NVDIMM in Write-Through mode Borislav Petkov
2015-06-07 17:43 ` [tip:x86/mm] " tip-bot for Toshi Kani
2015-06-07 17:43 ` tip-bot for Toshi Kani
2015-06-04 16:55 ` [PATCH 14/20] x86/mce: Add Local MCE definitions Borislav Petkov
2015-06-07 17:43 ` [tip:x86/core] " tip-bot for Ashok Raj
2015-06-04 16:55 ` [PATCH 15/20] x86/mce: Add infrastructure to support Local MCE Borislav Petkov
2015-06-07 17:43 ` [tip:x86/core] " tip-bot for Ashok Raj
2015-06-04 16:55 ` [PATCH 16/20] x86/mce: Handle Local MCE events Borislav Petkov
2015-06-07 17:44 ` [tip:x86/core] " tip-bot for Ashok Raj
2015-06-04 16:55 ` [PATCH 17/20] x86: Kill CONFIG_X86_HT Borislav Petkov
2015-06-07 17:44 ` [tip:x86/core] " tip-bot for Borislav Petkov
2015-06-04 16:55 ` [PATCH 18/20] x86/uapi: Do not export <asm/msr-index.h> as part of the user API headers Borislav Petkov
2015-06-07 17:44 ` [tip:x86/core] " tip-bot for Borislav Petkov
2015-06-04 16:55 ` [PATCH 19/20] x86/microcode: Disable builtin microcode loading on 32-bit for now Borislav Petkov
2015-06-07 17:45 ` [tip:x86/microcode] " tip-bot for Borislav Petkov
2015-06-04 16:55 ` [PATCH 20/20] x86/microcode: Correct variables type Borislav Petkov
2015-06-07 17:45 ` [tip:x86/microcode] x86/microcode: Correct CPU family related variable types tip-bot for Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tip-9dac6290945142e6b87d9f027edfee676dcfbfda@git.kernel.org \
--to=tipbot@zytor.com \
--cc=akpm@linux-foundation.org \
--cc=bp@suse.de \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-tip-commits@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=mcgrof@suse.com \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
--cc=toshi.kani@hp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.