* [Qemu-devel] Windows Server 2003 SP1 problems
@ 2005-04-13 6:52 Info
2005-04-13 8:51 ` Hetz Ben Hamo
0 siblings, 1 reply; 9+ messages in thread
From: Info @ 2005-04-13 6:52 UTC (permalink / raw)
To: qemu-devel
Hello
I have tested the installation of our Open Licensed
Windows Server 2003 Standard Edition as a guest on a WinXP
SP2 and Gentoo 2005.0 host. I used the CVS version of QEMU
from 12.4.2005. KQEMU is from Fabrice web site. Here
follows my experiences.
QEMU | Installation | Installation
| Windows 2003 | Service Pack 1
--------+--------------+---------------
SoftMMU | OK | FAIL 1)
KQEMU | FAIL 2) | OK/FAIL 3)
1) During installation of the SP1 I get the error "RUNDLL:
Error loading C:\WINDOWS\system32\syadm.cpl".
2) During loading the Windows 2003 Setup, QEMU terminate
with a segmentation fault.
3) If I use the installation done with SoftMMU und install
the SP1, I don't get the error from 1).
But the big problem is:
As soon as SP1 has been installed and I connect the
Windows 2003 guest to the windows update server, it
freezes, mouse and keyboard input stopped. If I wait long
enough, Windows 2003 restarts it self, telling it has been
recovered from a server failure. When freezed, the QEMU is
using 100% CPU time from the host and under Linux host, I
loose the keyboard output in the console (have to blindly
exit and login again).
Has anybody successfully installed Windows Server 2003
with Service Pack 1 ?
Any suggestion ?
Andreas
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [Qemu-devel] Windows Server 2003 SP1 problems 2005-04-13 6:52 [Qemu-devel] Windows Server 2003 SP1 problems Info @ 2005-04-13 8:51 ` Hetz Ben Hamo 2005-04-13 12:36 ` Info 0 siblings, 1 reply; 9+ messages in thread From: Hetz Ben Hamo @ 2005-04-13 8:51 UTC (permalink / raw) To: qemu-devel I'm testing it right now, and I'll report later.. One thing though, with how much RAM did you try to use QEMU? if you have 512MB on your host (or more), could you retry QEMU with -m 256? Thanks, Hetz On 4/13/05, Info <info@geodb.org> wrote: > Hello > > I have tested the installation of our Open Licensed > Windows Server 2003 Standard Edition as a guest on a WinXP > SP2 and Gentoo 2005.0 host. I used the CVS version of QEMU > from 12.4.2005. KQEMU is from Fabrice web site. Here > follows my experiences. > > QEMU | Installation | Installation > | Windows 2003 | Service Pack 1 > --------+--------------+--------------- > SoftMMU | OK | FAIL 1) > KQEMU | FAIL 2) | OK/FAIL 3) > > 1) During installation of the SP1 I get the error "RUNDLL: > Error loading C:\WINDOWS\system32\syadm.cpl". > > 2) During loading the Windows 2003 Setup, QEMU terminate > with a segmentation fault. > > 3) If I use the installation done with SoftMMU und install > the SP1, I don't get the error from 1). > > But the big problem is: > > As soon as SP1 has been installed and I connect the > Windows 2003 guest to the windows update server, it > freezes, mouse and keyboard input stopped. If I wait long > enough, Windows 2003 restarts it self, telling it has been > recovered from a server failure. When freezed, the QEMU is > using 100% CPU time from the host and under Linux host, I > loose the keyboard output in the console (have to blindly > exit and login again). > > Has anybody successfully installed Windows Server 2003 > with Service Pack 1 ? > > Any suggestion ? > > Andreas > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] Windows Server 2003 SP1 problems 2005-04-13 8:51 ` Hetz Ben Hamo @ 2005-04-13 12:36 ` Info 2005-04-13 13:22 ` Info 0 siblings, 1 reply; 9+ messages in thread From: Info @ 2005-04-13 12:36 UTC (permalink / raw) To: Hetz Ben Hamo, qemu-devel Hello Hetz Thank you for replaying. I assigned 192 MB RAM to the guest. It's not a lot, but after the basic install, Win2003 use 75 MB of RAM. The "/dev/shm" is reported to be 256 MB and I have to keep a little bit below. Otherwise, I'll have the well know bus error. Will try to change "/dev/shm" to 384 MB. Will need to find out how. Andreas On Wed, 13 Apr 2005 10:51:41 +0200 Hetz Ben Hamo <hetzbh@gmail.com> wrote: >I'm testing it right now, and I'll report later.. > >One thing though, with how much RAM did you try to use >QEMU? if you >have 512MB on your host (or more), could you retry QEMU >with -m 256? > >Thanks, >Hetz > >On 4/13/05, Info <info@geodb.org> wrote: >> Hello >> >> I have tested the installation of our Open Licensed >> Windows Server 2003 Standard Edition as a guest on a >>WinXP >> SP2 and Gentoo 2005.0 host. I used the CVS version of >>QEMU >> from 12.4.2005. KQEMU is from Fabrice web site. Here >> follows my experiences. >> >> QEMU | Installation | Installation >> | Windows 2003 | Service Pack 1 >> --------+--------------+--------------- >> SoftMMU | OK | FAIL 1) >> KQEMU | FAIL 2) | OK/FAIL 3) >> >> 1) During installation of the SP1 I get the error >>"RUNDLL: >> Error loading C:\WINDOWS\system32\syadm.cpl". >> >> 2) During loading the Windows 2003 Setup, QEMU terminate >> with a segmentation fault. >> >> 3) If I use the installation done with SoftMMU und >>install >> the SP1, I don't get the error from 1). >> >> But the big problem is: >> >> As soon as SP1 has been installed and I connect the >> Windows 2003 guest to the windows update server, it >> freezes, mouse and keyboard input stopped. If I wait >>long >> enough, Windows 2003 restarts it self, telling it has >>been >> recovered from a server failure. When freezed, the QEMU >>is >> using 100% CPU time from the host and under Linux host, >>I >> loose the keyboard output in the console (have to >>blindly >> exit and login again). >> >> Has anybody successfully installed Windows Server 2003 >> with Service Pack 1 ? >> >> Any suggestion ? >> >> Andreas >> >> _______________________________________________ >> Qemu-devel mailing list >> Qemu-devel@nongnu.org >> http://lists.nongnu.org/mailman/listinfo/qemu-devel >> > > >_______________________________________________ >Qemu-devel mailing list >Qemu-devel@nongnu.org >http://lists.nongnu.org/mailman/listinfo/qemu-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] Windows Server 2003 SP1 problems 2005-04-13 12:36 ` Info @ 2005-04-13 13:22 ` Info 2005-04-13 18:10 ` Hetz Ben Hamo 0 siblings, 1 reply; 9+ messages in thread From: Info @ 2005-04-13 13:22 UTC (permalink / raw) To: qemu-devel I tested it with 256 MB RAM for the guest (384 MB /dev/shm). It's the same. IE shows the following URL's, when the server get unresponsible: URL: http://ws03sp1.update.microsoft.com/windowsupdate/default.aspx?ln=en-us Status Bar: Opening page http://ws03sp1.update.microsoft.com/windowsupdate/footer.aspx?ln... Andreas PS: We have a real server where the windows update works fine for win2k3sp1. On Wed, 13 Apr 2005 14:36:59 +0200 "Info" <info@geodb.org> wrote: >Hello Hetz > >Thank you for replaying. I assigned 192 MB RAM to the >guest. It's not a lot, but after the basic install, >Win2003 use 75 MB of RAM. The "/dev/shm" is reported to >be 256 MB and I have to keep a little bit below. >Otherwise, I'll have the well know bus error. Will try to >change "/dev/shm" to 384 MB. Will need to find out how. > >Andreas > >On Wed, 13 Apr 2005 10:51:41 +0200 > Hetz Ben Hamo <hetzbh@gmail.com> wrote: >>I'm testing it right now, and I'll report later.. >> >>One thing though, with how much RAM did you try to use >>QEMU? if you >>have 512MB on your host (or more), could you retry QEMU >>with -m 256? >> >>Thanks, >>Hetz >> >>On 4/13/05, Info <info@geodb.org> wrote: >>>Hello >>> >>>I have tested the installation of our Open Licensed >>>Windows Server 2003 Standard Edition as a guest on a >>>WinXP >>>SP2 and Gentoo 2005.0 host. I used the CVS version of >>>QEMU >>>from 12.4.2005. KQEMU is from Fabrice web site. Here >>>follows my experiences. >>> >>>QEMU | Installation | Installation >>> | Windows 2003 | Service Pack 1 >>>--------+--------------+--------------- >>>SoftMMU | OK | FAIL 1) >>>KQEMU | FAIL 2) | OK/FAIL 3) >>> >>>1) During installation of the SP1 I get the error >>>"RUNDLL: >>>Error loading C:\WINDOWS\system32\syadm.cpl". >>> >>>2) During loading the Windows 2003 Setup, QEMU terminate >>>with a segmentation fault. >>> >>>3) If I use the installation done with SoftMMU und >>>install >>>the SP1, I don't get the error from 1). >>> >>>But the big problem is: >>> >>>As soon as SP1 has been installed and I connect the >>>Windows 2003 guest to the windows update server, it >>>freezes, mouse and keyboard input stopped. If I wait >>>long >>>enough, Windows 2003 restarts it self, telling it has >>>been >>>recovered from a server failure. When freezed, the QEMU >>>is >>>using 100% CPU time from the host and under Linux host, >>>I >>>loose the keyboard output in the console (have to >>>blindly >>>exit and login again). >>> >>>Has anybody successfully installed Windows Server 2003 >>>with Service Pack 1 ? >>> >>>Any suggestion ? >>> >>>Andreas >>> >>>_______________________________________________ >>>Qemu-devel mailing list >>>Qemu-devel@nongnu.org >>>http://lists.nongnu.org/mailman/listinfo/qemu-devel >>> >> >> >>_______________________________________________ >>Qemu-devel mailing list >>Qemu-devel@nongnu.org >>http://lists.nongnu.org/mailman/listinfo/qemu-devel > > > >_______________________________________________ >Qemu-devel mailing list >Qemu-devel@nongnu.org >http://lists.nongnu.org/mailman/listinfo/qemu-devel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] Windows Server 2003 SP1 problems 2005-04-13 13:22 ` Info @ 2005-04-13 18:10 ` Hetz Ben Hamo 2005-04-13 19:29 ` Leonardo E. Reiter 2005-04-13 19:38 ` Andreas Bollhalder 0 siblings, 2 replies; 9+ messages in thread From: Hetz Ben Hamo @ 2005-04-13 18:10 UTC (permalink / raw) To: qemu-devel Yup, same problem appears here. Just finished install anything and after launching windows update (after applying SP1), QEMU freezes (although you can still switch to the QEMU console etc) Thanks, Hetz On 4/13/05, Info <info@geodb.org> wrote: > I tested it with 256 MB RAM for the guest (384 MB > /dev/shm). It's the same. IE shows the following URL's, > when the server get unresponsible: > > URL: > http://ws03sp1.update.microsoft.com/windowsupdate/default.aspx?ln=en-us > > Status Bar: > Opening page > http://ws03sp1.update.microsoft.com/windowsupdate/footer.aspx?ln... > > Andreas > > PS: We have a real server where the windows update works > fine for win2k3sp1. > > On Wed, 13 Apr 2005 14:36:59 +0200 > "Info" <info@geodb.org> wrote: > >Hello Hetz > > > >Thank you for replaying. I assigned 192 MB RAM to the > >guest. It's not a lot, but after the basic install, > >Win2003 use 75 MB of RAM. The "/dev/shm" is reported to > >be 256 MB and I have to keep a little bit below. > >Otherwise, I'll have the well know bus error. Will try to > >change "/dev/shm" to 384 MB. Will need to find out how. > > > >Andreas > > > >On Wed, 13 Apr 2005 10:51:41 +0200 > > Hetz Ben Hamo <hetzbh@gmail.com> wrote: > >>I'm testing it right now, and I'll report later.. > >> > >>One thing though, with how much RAM did you try to use > >>QEMU? if you > >>have 512MB on your host (or more), could you retry QEMU > >>with -m 256? > >> > >>Thanks, > >>Hetz > >> > >>On 4/13/05, Info <info@geodb.org> wrote: > >>>Hello > >>> > >>>I have tested the installation of our Open Licensed > >>>Windows Server 2003 Standard Edition as a guest on a > >>>WinXP > >>>SP2 and Gentoo 2005.0 host. I used the CVS version of > >>>QEMU > >>>from 12.4.2005. KQEMU is from Fabrice web site. Here > >>>follows my experiences. > >>> > >>>QEMU | Installation | Installation > >>> | Windows 2003 | Service Pack 1 > >>>--------+--------------+--------------- > >>>SoftMMU | OK | FAIL 1) > >>>KQEMU | FAIL 2) | OK/FAIL 3) > >>> > >>>1) During installation of the SP1 I get the error > >>>"RUNDLL: > >>>Error loading C:\WINDOWS\system32\syadm.cpl". > >>> > >>>2) During loading the Windows 2003 Setup, QEMU terminate > >>>with a segmentation fault. > >>> > >>>3) If I use the installation done with SoftMMU und > >>>install > >>>the SP1, I don't get the error from 1). > >>> > >>>But the big problem is: > >>> > >>>As soon as SP1 has been installed and I connect the > >>>Windows 2003 guest to the windows update server, it > >>>freezes, mouse and keyboard input stopped. If I wait > >>>long > >>>enough, Windows 2003 restarts it self, telling it has > >>>been > >>>recovered from a server failure. When freezed, the QEMU > >>>is > >>>using 100% CPU time from the host and under Linux host, > >>>I > >>>loose the keyboard output in the console (have to > >>>blindly > >>>exit and login again). > >>> > >>>Has anybody successfully installed Windows Server 2003 > >>>with Service Pack 1 ? > >>> > >>>Any suggestion ? > >>> > >>>Andreas > >>> > >>>_______________________________________________ > >>>Qemu-devel mailing list > >>>Qemu-devel@nongnu.org > >>>http://lists.nongnu.org/mailman/listinfo/qemu-devel > >>> > >> > >> > >>_______________________________________________ > >>Qemu-devel mailing list > >>Qemu-devel@nongnu.org > >>http://lists.nongnu.org/mailman/listinfo/qemu-devel > > > > > > > >_______________________________________________ > >Qemu-devel mailing list > >Qemu-devel@nongnu.org > >http://lists.nongnu.org/mailman/listinfo/qemu-devel > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] Windows Server 2003 SP1 problems 2005-04-13 18:10 ` Hetz Ben Hamo @ 2005-04-13 19:29 ` Leonardo E. Reiter 2005-04-13 20:12 ` Hetz Ben Hamo 2005-04-13 19:38 ` Andreas Bollhalder 1 sibling, 1 reply; 9+ messages in thread From: Leonardo E. Reiter @ 2005-04-13 19:29 UTC (permalink / raw) To: qemu-devel Did you happen to try this on Intel x86 with KQEMU installed? We noticed that some operations work much better with KQEMU, almost as if there were some translation or timing problems with the target-i386 translator. It would be interesting to know if KQEMU clears this up. By the way, we will be doing a lot of testing here shortly with Windows 2003 Standard and Enterprise servers in just a few more weeks, so we can certainly provide lots of test data and feedback, fixes, etc., as well. - Leo Reiter Hetz Ben Hamo wrote: > Yup, same problem appears here. Just finished install anything and > after launching windows update (after applying SP1), QEMU freezes > (although you can still switch to the QEMU console etc) > -- Leonardo E. Reiter Vice President of Engineering Win4Lin, Inc. Virtual Computing from Desktop to Data Center Main: +1 512 339 7979 Fax: +1 512 532 6501 http://www.win4lin.com ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] Windows Server 2003 SP1 problems 2005-04-13 19:29 ` Leonardo E. Reiter @ 2005-04-13 20:12 ` Hetz Ben Hamo 0 siblings, 0 replies; 9+ messages in thread From: Hetz Ben Hamo @ 2005-04-13 20:12 UTC (permalink / raw) To: qemu-devel Leonardo, I did the Win2003 tests with the following configs: * With KQEMU * Without KQEMU * With the patch that you pointed the link to (the one with the IDE patch) * CVS checkout All gives the same results.. Thanks, Hetz On 4/13/05, Leonardo E. Reiter <lreiter@win4lin.com> wrote: > Did you happen to try this on Intel x86 with KQEMU installed? We > noticed that some operations work much better with KQEMU, almost as if > there were some translation or timing problems with the target-i386 > translator. It would be interesting to know if KQEMU clears this up. > > By the way, we will be doing a lot of testing here shortly with Windows > 2003 Standard and Enterprise servers in just a few more weeks, so we can > certainly provide lots of test data and feedback, fixes, etc., as well. > > - Leo Reiter > > Hetz Ben Hamo wrote: > > Yup, same problem appears here. Just finished install anything and > > after launching windows update (after applying SP1), QEMU freezes > > (although you can still switch to the QEMU console etc) > > > > -- > Leonardo E. Reiter > Vice President of Engineering > > Win4Lin, Inc. > Virtual Computing from Desktop to Data Center > Main: +1 512 339 7979 > Fax: +1 512 532 6501 > http://www.win4lin.com > > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel > ^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [Qemu-devel] Windows Server 2003 SP1 problems 2005-04-13 18:10 ` Hetz Ben Hamo 2005-04-13 19:29 ` Leonardo E. Reiter @ 2005-04-13 19:38 ` Andreas Bollhalder 1 sibling, 0 replies; 9+ messages in thread From: Andreas Bollhalder @ 2005-04-13 19:38 UTC (permalink / raw) To: 'Hetz Ben Hamo', qemu-devel I have disabled the Windows NX-bit implementation which came with the SP1 of Win2003. To do this, you have to alter the "boot.ini" entry to load up Windows. Change "/NoExecute=xxxxx" into "/NoExecute=AlwaysOff". Unfortunatly, it doesn't help. I believe, the problem is only the following link (as posted): http://ws03sp1.update.microsoft.com/windowsupdate/footer.aspx?ln=en-us Without SP1, I can surf this link and it will displayed as it is fine. Funny only, that Win2003 without SP1 complains about this site is not a trusted one ;-) When applied SP1, the small HTML code with JavaScript and CSS genereated by the "footer.aspx" locksup Win2003. I'm out of ideas. I think that Windows Server 2003 is currently not fully supported by QEMU. Without SP1, I also can't install all windows updates. I don't wonder, if M$ did a special thing, which conflict with QEMU... they even could loose theyre Win3x source code. Andreas > -----Original Message----- > From: qemu-devel-bounces+bolle=geodb.org@nongnu.org > [mailto:qemu-devel-bounces+bolle=geodb.org@nongnu.org] On > Behalf Of Hetz Ben Hamo > Sent: Wednesday, April 13, 2005 8:10 PM > To: qemu-devel@nongnu.org > Subject: Re: [Qemu-devel] Windows Server 2003 SP1 problems > > > Yup, same problem appears here. Just finished install anything and > after launching windows update (after applying SP1), QEMU freezes > (although you can still switch to the QEMU console etc) > > Thanks, > Hetz > > > On 4/13/05, Info <info@geodb.org> wrote: > > I tested it with 256 MB RAM for the guest (384 MB > > /dev/shm). It's the same. IE shows the following URL's, > > when the server get unresponsible: > > > > URL: > > > http://ws03sp1.update.microsoft.com/windowsupdate/default.aspx > ?ln=en-us > > > > Status Bar: > > Opening page > > http://ws03sp1.update.microsoft.com/windowsupdate/footer.aspx?ln... > > > > Andreas > > > > PS: We have a real server where the windows update works > > fine for win2k3sp1. > > > > On Wed, 13 Apr 2005 14:36:59 +0200 > > "Info" <info@geodb.org> wrote: > > >Hello Hetz > > > > > >Thank you for replaying. I assigned 192 MB RAM to the > > >guest. It's not a lot, but after the basic install, > > >Win2003 use 75 MB of RAM. The "/dev/shm" is reported to > > >be 256 MB and I have to keep a little bit below. > > >Otherwise, I'll have the well know bus error. Will try to > > >change "/dev/shm" to 384 MB. Will need to find out how. > > > > > >Andreas > > > > > >On Wed, 13 Apr 2005 10:51:41 +0200 > > > Hetz Ben Hamo <hetzbh@gmail.com> wrote: > > >>I'm testing it right now, and I'll report later.. > > >> > > >>One thing though, with how much RAM did you try to use > > >>QEMU? if you > > >>have 512MB on your host (or more), could you retry QEMU > > >>with -m 256? > > >> > > >>Thanks, > > >>Hetz > > >> > > >>On 4/13/05, Info <info@geodb.org> wrote: > > >>>Hello > > >>> > > >>>I have tested the installation of our Open Licensed > > >>>Windows Server 2003 Standard Edition as a guest on a > > >>>WinXP > > >>>SP2 and Gentoo 2005.0 host. I used the CVS version of > > >>>QEMU > > >>>from 12.4.2005. KQEMU is from Fabrice web site. Here > > >>>follows my experiences. > > >>> > > >>>QEMU | Installation | Installation > > >>> | Windows 2003 | Service Pack 1 > > >>>--------+--------------+--------------- > > >>>SoftMMU | OK | FAIL 1) > > >>>KQEMU | FAIL 2) | OK/FAIL 3) > > >>> > > >>>1) During installation of the SP1 I get the error > > >>>"RUNDLL: > > >>>Error loading C:\WINDOWS\system32\syadm.cpl". > > >>> > > >>>2) During loading the Windows 2003 Setup, QEMU terminate > > >>>with a segmentation fault. > > >>> > > >>>3) If I use the installation done with SoftMMU und > > >>>install > > >>>the SP1, I don't get the error from 1). > > >>> > > >>>But the big problem is: > > >>> > > >>>As soon as SP1 has been installed and I connect the > > >>>Windows 2003 guest to the windows update server, it > > >>>freezes, mouse and keyboard input stopped. If I wait > > >>>long > > >>>enough, Windows 2003 restarts it self, telling it has > > >>>been > > >>>recovered from a server failure. When freezed, the QEMU > > >>>is > > >>>using 100% CPU time from the host and under Linux host, > > >>>I > > >>>loose the keyboard output in the console (have to > > >>>blindly > > >>>exit and login again). > > >>> > > >>>Has anybody successfully installed Windows Server 2003 > > >>>with Service Pack 1 ? > > >>> > > >>>Any suggestion ? > > >>> > > >>>Andreas > > >>> > > >>>_______________________________________________ > > >>>Qemu-devel mailing list > > >>>Qemu-devel@nongnu.org > > >>>http://lists.nongnu.org/mailman/listinfo/qemu-devel > > >>> > > >> > > >> > > >>_______________________________________________ > > >>Qemu-devel mailing list > > >>Qemu-devel@nongnu.org > > >>http://lists.nongnu.org/mailman/listinfo/qemu-devel > > > > > > > > > > > >_______________________________________________ > > >Qemu-devel mailing list > > >Qemu-devel@nongnu.org > > >http://lists.nongnu.org/mailman/listinfo/qemu-devel > > > > _______________________________________________ > > Qemu-devel mailing list > > Qemu-devel@nongnu.org > > http://lists.nongnu.org/mailman/listinfo/qemu-devel > > > > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel > ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Qemu-devel] Crashes of quemu 0.6.1 in Windows. @ 2005-04-28 12:47 D O 2005-04-28 19:01 ` [Qemu-devel] Windows Server 2003 SP1 problems Andreas Bollhalder 0 siblings, 1 reply; 9+ messages in thread From: D O @ 2005-04-28 12:47 UTC (permalink / raw) To: qemu-devel Hi there. I dont know if this problems can be "watched" also in Linux, I guess so You can visit the place http://m2.dad-answers.com/qemu-forum/viewtopic.php?t=588 There a guy redirect me here, then I only post here for make you the notification. There are two diferent crashes: The first that I post in that thread (in Bochs it show a message for kill the running emulation), cause that quemu hangs and take 100% of CPU. The second after being loaded by grub if I use a xor cx, cx then div cl it will hang too taking 100% CPU time. Have a nice day. _________________________________________________________ Do You Yahoo!? La mejor conexión a internet y 25MB extra a tu correo por $100 al mes. http://net.yahoo.com.mx ^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [Qemu-devel] Windows Server 2003 SP1 problems 2005-04-28 12:47 [Qemu-devel] Crashes of quemu 0.6.1 in Windows D O @ 2005-04-28 19:01 ` Andreas Bollhalder 0 siblings, 0 replies; 9+ messages in thread From: Andreas Bollhalder @ 2005-04-28 19:01 UTC (permalink / raw) To: qemu-devel I reseached a bit more. Have stripped down the HTML code which freezes Win2003SP1 when loaded in IE. It seems, that the gradient in the footer is done by DirectX and this filter function does the freezes. If someone could find out the name of the DLL where this function is implemented or have some advice to debug it with gdb. I could do it on my Gentoo 2005.0 server with or without kqemu. Andreas <html> <head> <title>Let's die Windows Server 2003 SP1 in QEMU</title> </head> <body> <table> <tr> <td width="100%" style="filter:progid:DXImageTransform.Microsoft.Gradient(startColorStr ='#FFFFFF', endColorStr='#6487DB', gradientType='1')">TEST</td> </tr> </table> </body> </html> ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2005-04-28 19:17 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2005-04-13 6:52 [Qemu-devel] Windows Server 2003 SP1 problems Info 2005-04-13 8:51 ` Hetz Ben Hamo 2005-04-13 12:36 ` Info 2005-04-13 13:22 ` Info 2005-04-13 18:10 ` Hetz Ben Hamo 2005-04-13 19:29 ` Leonardo E. Reiter 2005-04-13 20:12 ` Hetz Ben Hamo 2005-04-13 19:38 ` Andreas Bollhalder -- strict thread matches above, loose matches on Subject: below -- 2005-04-28 12:47 [Qemu-devel] Crashes of quemu 0.6.1 in Windows D O 2005-04-28 19:01 ` [Qemu-devel] Windows Server 2003 SP1 problems Andreas Bollhalder
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.