* snd-hda-intel support for SPDIF-in wiht vt1708 card? @ 2007-12-17 18:27 John Stile 2007-12-18 13:04 ` Takashi Iwai 0 siblings, 1 reply; 8+ messages in thread From: John Stile @ 2007-12-17 18:27 UTC (permalink / raw) To: alsa-devel I am trying to use a Via VT1708 audio card ( uses the snd-hda-intel.ko driver) to record from SPDIF-in. An off-list reply to my posting to alsa-users list suggested that snd-hda-intel.ko might not support SPDIF-in with the VT1708 card, which brought me here. Can someone who works on the Intel HDA driver tell me if it supports SPDIF-in on the VT1708 audio card? Should 'arecord -L' show "Digital Audio Input"? Environment: Audio Card: VT1708 ALSA version: 1.0.15 (as gentoo packages) Driver: snd-hda-intel.ko (In-kernel) Kernel: 2.6.23-gentoo-r3 Distribution: Gentoo Systemboard: PX10000G (VIA pico-itx) Case: Serener GS-L08 case ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: snd-hda-intel support for SPDIF-in wiht vt1708 card? 2007-12-17 18:27 snd-hda-intel support for SPDIF-in wiht vt1708 card? John Stile @ 2007-12-18 13:04 ` Takashi Iwai 2007-12-18 16:28 ` John Stile 0 siblings, 1 reply; 8+ messages in thread From: Takashi Iwai @ 2007-12-18 13:04 UTC (permalink / raw) To: John Stile; +Cc: alsa-devel At Mon, 17 Dec 2007 10:27:27 -0800, John Stile wrote: > > I am trying to use a Via VT1708 audio card ( uses the snd-hda-intel.ko > driver) to record from SPDIF-in. > > An off-list reply to my posting to alsa-users list suggested that > snd-hda-intel.ko might not support SPDIF-in with the VT1708 card, which > brought me here. > > Can someone who works on the Intel HDA driver tell me if it supports > SPDIF-in on the VT1708 audio card? It should be, but not tested well, I guess. The driver enables the SPDIF-in capability when BIOS sets the pin information properly. Check /proc/asound/card0/codec#* file whether you have any (activated) input pin node that supports SPDIF-in. Takashi ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: snd-hda-intel support for SPDIF-in wiht vt1708 card? 2007-12-18 13:04 ` Takashi Iwai @ 2007-12-18 16:28 ` John Stile 2007-12-18 15:05 ` Takashi Iwai 0 siblings, 1 reply; 8+ messages in thread From: John Stile @ 2007-12-18 16:28 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel On Tue, 2007-12-18 at 14:04 +0100, Takashi Iwai wrote: > At Mon, 17 Dec 2007 10:27:27 -0800, > John Stile wrote: > > > > I am trying to use a Via VT1708 audio card ( uses the snd-hda-intel.ko > > driver) to record from SPDIF-in. > > > > An off-list reply to my posting to alsa-users list suggested that > > snd-hda-intel.ko might not support SPDIF-in with the VT1708 card, which > > brought me here. > > > > Can someone who works on the Intel HDA driver tell me if it supports > > SPDIF-in on the VT1708 audio card? > > It should be, but not tested well, I guess. > > The driver enables the SPDIF-in capability when BIOS sets the pin > information properly. Check /proc/asound/card0/codec#* file whether > you have any (activated) input pin node that supports SPDIF-in. > > > Takashi Thank you for your reply! The output of your command is below. spdif-out=Node 0x25 spdif-in=Node 0x26 Neither labeled inactive, but spdif-in doesn't list a "Connection" line. I have the latest bios: 1.03 (2007/08/23) (a beta bios is available). Do I try the beta bios? pico ~ # cat /proc/asound/card0/codec#0 Codec: VIA VIA VT1708 Address: 0 Vendor Id: 0x11061708 Subsystem Id: 0x11060300 Revision Id: 0x100700 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A Node 0x10 [Audio Output] wcaps 0x411: Stereo PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xa]: 16 24 formats [0x1]: PCM Power: 0x0 Node 0x11 [Audio Output] wcaps 0x411: Stereo PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xa]: 16 24 formats [0x1]: PCM Power: 0x0 Node 0x12 [Audio Output] wcaps 0x411: Stereo PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xa]: 16 24 formats [0x1]: PCM Power: 0x0 Node 0x13 [Audio Output] wcaps 0x411: Stereo PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xa]: 16 24 formats [0x1]: PCM Power: 0x0 Node 0x14 [Audio Output] wcaps 0x211: Stereo Digital PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xa]: 16 24 formats [0x5]: PCM AC3 Node 0x15 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x14, stepsize=0x06, mute=1 Amp-In vals: [0x14 0x14] PCM: rates [0x440]: 48000 192000 bits [0xa]: 16 24 formats [0x1]: PCM Power: 0x0 Connection: 1 0x18 Node 0x16 [Audio Input] wcaps 0x100311: Stereo Digital PCM: rates [0x1f0]: 32000 44100 48000 88200 96000 bits [0xa]: 16 24 formats [0x5]: PCM AC3 Connection: 1 0x26 Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x06, mute=1 Amp-In vals: [0x1b 0x1b] [0x00 0x00] [0x04 0x04] [0x1b 0x1b] [0x00 0x00] [0x80 0x80] Connection: 6 0x10 0x24 0x1d 0x1e 0x21 0x13 Node 0x18 [Audio Selector] wcaps 0x300101: Stereo Connection: 5 0x17 0x24 0x1d* 0x1e 0x21 Node 0x19 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x00 0x00] Connection: 1 0x11 Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x00 0x00] Connection: 1 0x12 Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x00 0x00] Connection: 1 0x13 Node 0x1c [Pin Complex] wcaps 0x40010d: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x00 0x00] Pincap 0x081c: OUT HP Detect Pin Default 0x410110f2: [N/A] Line Out at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x00: Connection: 1 0x19 Node 0x1d [Pin Complex] wcaps 0x400101: Stereo Pincap 0x08334: IN OUT Detect Pin Default 0x01a19026: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink Pin-ctls: 0x21: IN Connection: 1 0x1a Node 0x1e [Pin Complex] wcaps 0x400101: Stereo Pincap 0x08334: IN OUT Detect Pin Default 0x0181302e: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue Pin-ctls: 0x20: IN Connection: 1 0x19 Node 0x1f [Pin Complex] wcaps 0x40010d: Stereo Amp-Out Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x17 0x17] Pincap 0x081c: OUT HP Detect Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green Pin-ctls: 0x40: OUT Connection: 1 0x17 Node 0x20 [Pin Complex] wcaps 0x40010d: Stereo Amp-Out Amp-Out caps: ofs=0x1b, nsteps=0x1b, stepsize=0x06, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x081c: OUT HP Detect Pin Default 0x422140f0: [N/A] HP Out at Ext Front Conn = 1/8, Color = Green Pin-ctls: 0x40: OUT Connection: 1 0x17 Node 0x21 [Pin Complex] wcaps 0x400101: Stereo Pincap 0x08334: IN OUT Detect Pin Default 0x42a190f0: [N/A] Mic at Ext Front Conn = 1/8, Color = Pink Pin-ctls: 0x00: Connection: 1 0x1b Node 0x22 [Pin Complex] wcaps 0x400101: Stereo Pincap 0x0814: OUT Detect Pin Default 0x410160f1: [N/A] Line Out at Ext Rear Conn = 1/8, Color = Orange Pin-ctls: 0x00: Connection: 1 0x1a Node 0x23 [Pin Complex] wcaps 0x400101: Stereo Pincap 0x0814: OUT Detect Pin Default 0x410120f4: [N/A] Line Out at Ext Rear Conn = 1/8, Color = Grey Pin-ctls: 0x00: Connection: 1 0x1b Node 0x24 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x593301f7: [N/A] CD at Int ATAPI Conn = ATAPI, Color = Unknown Pin-ctls: 0x00: Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x074411f0: [Jack] SPDIF Out at Ext Rear Panel Conn = RCA, Color = Black Pin-ctls: 0x40: OUT Connection: 1 0x14 Node 0x26 [Pin Complex] wcaps 0x400201: Stereo Digital Pincap 0x0810030: IN OUT EAPD Pin Default 0x07c421f0: [Jack] SPDIF In at Ext Rear Panel Conn = RCA, Color = Grey Pin-ctls: 0x00: Node 0x27 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x14, stepsize=0x06, mute=1 Amp-In vals: [0x14 0x14] PCM: rates [0x440]: 48000 192000 bits [0xa]: 16 24 formats [0x1]: PCM Power: 0x0 Connection: 1 0x21 ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: snd-hda-intel support for SPDIF-in wiht vt1708 card? 2007-12-18 16:28 ` John Stile @ 2007-12-18 15:05 ` Takashi Iwai 2007-12-19 4:49 ` John Stile 0 siblings, 1 reply; 8+ messages in thread From: Takashi Iwai @ 2007-12-18 15:05 UTC (permalink / raw) To: John Stile; +Cc: alsa-devel At Tue, 18 Dec 2007 08:28:06 -0800, John Stile wrote: > > On Tue, 2007-12-18 at 14:04 +0100, Takashi Iwai wrote: > > At Mon, 17 Dec 2007 10:27:27 -0800, > > John Stile wrote: > > > > > > I am trying to use a Via VT1708 audio card ( uses the snd-hda-intel.ko > > > driver) to record from SPDIF-in. > > > > > > An off-list reply to my posting to alsa-users list suggested that > > > snd-hda-intel.ko might not support SPDIF-in with the VT1708 card, which > > > brought me here. > > > > > > Can someone who works on the Intel HDA driver tell me if it supports > > > SPDIF-in on the VT1708 audio card? > > > > It should be, but not tested well, I guess. > > > > The driver enables the SPDIF-in capability when BIOS sets the pin > > information properly. Check /proc/asound/card0/codec#* file whether > > you have any (activated) input pin node that supports SPDIF-in. > > > > > > Takashi > Thank you for your reply! > The output of your command is below. > spdif-out=Node 0x25 > spdif-in=Node 0x26 > Neither labeled inactive, > but spdif-in doesn't list a "Connection" line. Just because it's only for input (thus it has no "source"). > I have the latest bios: 1.03 (2007/08/23) (a beta bios is available). > Do I try the beta bios? I don't think so. Likely a driver bug. How about the patch below (against the latest HG version)? Takashi diff -r 2d3893cf030c pci/hda/patch_via.c --- a/pci/hda/patch_via.c Tue Dec 18 15:42:53 2007 +0100 +++ b/pci/hda/patch_via.c Tue Dec 18 17:48:00 2007 +0100 @@ -568,25 +568,27 @@ static int via_init(struct hda_codec *co if (IS_VT1708_VENDORID(codec->vendor_id)) { snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, - 0x40); + PIN_OUT); snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0, AC_VERB_SET_EAPD_BTLENABLE, 0x02); } else if (IS_VT1709_10CH_VENDORID(codec->vendor_id) || IS_VT1709_6CH_VENDORID(codec->vendor_id)) { snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, - 0x40); + PIN_OUT); snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0, AC_VERB_SET_EAPD_BTLENABLE, 0x02); } else if (IS_VT1708B_8CH_VENDORID(codec->vendor_id) || IS_VT1708B_4CH_VENDORID(codec->vendor_id)) { snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, - 0x40); + PIN_OUT); snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0, AC_VERB_SET_EAPD_BTLENABLE, 0x02); } - } + } else /* enable SPDIF-input pin */ + snd_hda_codec_write(codec, spec->autocfg.dig_in_pin, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN); return 0; } ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: snd-hda-intel support for SPDIF-in wiht vt1708 card? 2007-12-18 15:05 ` Takashi Iwai @ 2007-12-19 4:49 ` John Stile 2007-12-19 5:22 ` snd-hda-intel support for SPDIF-inwiht " Darryl House 2007-12-19 9:30 ` snd-hda-intel support for SPDIF-in wiht " Takashi Iwai 0 siblings, 2 replies; 8+ messages in thread From: John Stile @ 2007-12-19 4:49 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel On Tue, 2007-12-18 at 16:05 +0100, Takashi Iwai wrote: > At Tue, 18 Dec 2007 08:28:06 -0800, > John Stile wrote: > > > > On Tue, 2007-12-18 at 14:04 +0100, Takashi Iwai wrote: > > > At Mon, 17 Dec 2007 10:27:27 -0800, > > > John Stile wrote: > > > > > > > > I am trying to use a Via VT1708 audio card ( uses the snd-hda-intel.ko > > > > driver) to record from SPDIF-in. > > > > > > > > An off-list reply to my posting to alsa-users list suggested that > > > > snd-hda-intel.ko might not support SPDIF-in with the VT1708 card, which > > > > brought me here. > > > > > > > > Can someone who works on the Intel HDA driver tell me if it supports > > > > SPDIF-in on the VT1708 audio card? > > > > > > It should be, but not tested well, I guess. > > > > > > The driver enables the SPDIF-in capability when BIOS sets the pin > > > information properly. Check /proc/asound/card0/codec#* file whether > > > you have any (activated) input pin node that supports SPDIF-in. > > > > > > > > > Takashi > > Thank you for your reply! > > The output of your command is below. > > spdif-out=Node 0x25 > > spdif-in=Node 0x26 > > Neither labeled inactive, > > but spdif-in doesn't list a "Connection" line. > > Just because it's only for input (thus it has no "source"). > > > I have the latest bios: 1.03 (2007/08/23) (a beta bios is available). > > Do I try the beta bios? > > I don't think so. Likely a driver bug. > How about the patch below (against the latest HG version)? > > > Takashi > > diff -r 2d3893cf030c pci/hda/patch_via.c > --- a/pci/hda/patch_via.c Tue Dec 18 15:42:53 2007 +0100 > +++ b/pci/hda/patch_via.c Tue Dec 18 17:48:00 2007 +0100 > @@ -568,25 +568,27 @@ static int via_init(struct hda_codec *co > if (IS_VT1708_VENDORID(codec->vendor_id)) { > snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0, > AC_VERB_SET_PIN_WIDGET_CONTROL, > - 0x40); > + PIN_OUT); > snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0, > AC_VERB_SET_EAPD_BTLENABLE, 0x02); > } else if (IS_VT1709_10CH_VENDORID(codec->vendor_id) || > IS_VT1709_6CH_VENDORID(codec->vendor_id)) { > snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0, > AC_VERB_SET_PIN_WIDGET_CONTROL, > - 0x40); > + PIN_OUT); > snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0, > AC_VERB_SET_EAPD_BTLENABLE, 0x02); > } else if (IS_VT1708B_8CH_VENDORID(codec->vendor_id) || > IS_VT1708B_4CH_VENDORID(codec->vendor_id)) { > snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0, > AC_VERB_SET_PIN_WIDGET_CONTROL, > - 0x40); > + PIN_OUT); > snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0, > AC_VERB_SET_EAPD_BTLENABLE, 0x02); > } > - } > + } else /* enable SPDIF-input pin */ > + snd_hda_codec_write(codec, spec->autocfg.dig_in_pin, 0, > + AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN); > > return 0; > } After making the changes by hand the compile failed. This is the output: gcc utils/mod-deps.c -o utils/mod-deps utils/mod-deps --basedir /usr/src/alsa-driver/alsa-kernel --hiddendir /usr/src/alsa-driver --versiondep /usr/src/alsa-driver/kconfig-vers --makeconf > toplevel.config.in can't handle word INPUT=y properly, supposing it's OK can't handle word INPUT=SND_USB_CAIAQ properly, supposing it's OK utils/mod-deps --basedir /usr/src/alsa-driver/alsa-kernel --hiddendir /usr/src/alsa-driver --versiondep /usr/src/alsa-driver/kconfig-vers --acinclude > acinclude.m4 can't handle word INPUT=y properly, supposing it's OK can't handle word INPUT=SND_USB_CAIAQ properly, supposing it's OK utils/mod-deps --basedir /usr/src/alsa-driver/alsa-kernel --hiddendir /usr/src/alsa-driver --versiondep /usr/src/alsa-driver/kconfig-vers --include > include/config1.h.in can't handle word INPUT=y properly, supposing it's OK can't handle word INPUT=SND_USB_CAIAQ properly, supposing it's OK ./configure --with-debug=full --with-isapnp=yes --with-sequencer=yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for ranlib... ranlib checking for a BSD-compatible install... /usr/bin/install -c checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking whether time.h and sys/time.h may both be included... yes checking whether gcc needs -traditional... no checking for current directory... /usr/src/alsa-driver checking cross compile... checking for directory with kernel source... /lib/modules/2.6.23-gentoo-r3/source checking for directory with kernel build... /lib/modules/2.6.23-gentoo-r3/build checking for kernel linux/version.h... yes checking for kernel linux/autoconf.h... yes checking for kernel version... 2.6.23-gentoo-r3 checking for GCC version... Kernel compiler: gcc 4.1.2 (Gentoo 4.1.2 p1.0.2) Used compiler: gcc (GCC) 4.1.2 (Gentoo 4.1.2 p1.0.2) checking for built-in ALSA... no checking for existing ALSA module... yes checking for Red Hat kernel... auto checking for Red Hat kernel... no checking for SUSE kernel... auto checking for SUSE kernel... no checking for CONFIG_EXPERIMENTAL... yes checking for kernel linux/config.h... no Creating <linux/config.h>... checking to modify of kernel linux/kmod.h... no checking for kernel linux/utsrelease.h... yes checking for kernel linux/compiler.h... yes checking for kernel linux/pm.h... yes checking for kernel linux/spinlock.h... yes checking for kernel linux/irq.h... yes checking for kernel linux/threads.h... yes checking for kernel linux/rwsem.h... yes checking for kernel linux/gameport.h... yes checking for kernel media/v4l2-dev.h... yes checking for kernel linux/devfs_fs_kernel.h... no Creating a dummy <linux/devfs_fs_kernel.h>... checking for kernel linux/highmem.h... yes checking for kernel linux/workqueue.h... yes checking for kernel linux/dma-mapping.h... yes checking for kernel asm/hw_irq.h... yes checking for kernel linux/device.h... yes checking for kernel linux/platform_device.h... yes checking for kernel linux/isa.h... yes checking for kernel linux/jiffies.h... yes checking for kernel linux/compat.h... yes checking for kernel linux/log2.h... yes checking for kernel linux/adb.h... yes checking for kernel linux/cuda.h... yes checking for kernel linux/pmu.h... yes checking for kernel linux/moduleparam.h... yes checking for kernel linux/syscalls.h... yes checking for kernel linux/firmware.h... yes checking for kernel linux/err.h... yes checking for kernel linux/bitmap.h... yes checking for kernel linux/mutex.h... yes checking for kernel linux/latency.h... yes checking for kernel linux/kthread.h... yes checking for kernel asm/irq_regs.h... yes checking for kernel module symbol versions... yes checking for has ioport support... yes checking for PCI support in kernel... yes checking for I2C driver in kernel... module checking for I2C_POWERMAC in kernel... unknown checking for firmware loader... module checking for input subsystem in kernel... yes checking for directory to store kernel modules... /lib/modules/2.6.23-gentoo-r3/kernel/sound checking for verbose procfs... on checking for verbose printk... on checking for debug level... full checking for ISA support in kernel... yes checking for processor type... x86_32 checking for ISA DMA API... yes checking for SMP... yes checking for Video device support in kernel... yes checking for ISA PnP driver in kernel... yes checking for PnP driver in kernel... yes checking for Kernel ISA-PnP support... yes checking for strlcpy... yes checking for snprintf... yes checking for vsnprintf... yes checking for scnprintf... yes checking for sscanf... yes checking for vmalloc_to_page... no checking for old kmod... no checking for PDE... no checking for pci_set_consistent_dma_mask... no checking for pci_dev_present... no checking for msleep... yes checking for msleep_interrupt... yes checking for msecs_to_jiffies... yes checking for tty->count is the atomic type... no checking for video_get_drvdata... no checking for V4L1 layer... yes checking for io_remap_pfn_range... no checking for new io_remap_page_range... no checking for kcalloc... no checking for kstrdup... yes checking for kzalloc... no checking for create_workqueue with flags... no checking for saved_config_space in pci_dev... no checking for register_sound_special_device... no checking for driver version... 1.0.15 checking for sequencer support... yes checking for OSS/Free emulation... yes checking for OSS PCM plugin system inclusion... yes checking for RTC callback support in kernel... no checking for HPET support... no checking for dynamic minor numbers... no checking for support of old API... yes checking for Procfs support... yes checking for USB support... yes checking for class_simple... no checking for old driver suspend/resume callbacks... no checking for removal of page-reservation for nopage/mmap... no checking for nested class_device... no checking for new IRQ handler... no checking for gfp_t... no checking for PnP suspend/resume... no checking for new unlocked/compat_ioctl... no checking for x86-compatible PC... yes checking for High-Res timers... no checking for kernel PCMCIA checking for PCMCIA support... yes checking for PC9800 support in kernel... no checking for parallel port support... yes checking for power management... yes checking for CONFIG_HAS_DMA... yes checking for which soundcards to compile driver for... all configure: creating ./config.status config.status: creating version config.status: creating Makefile.conf config.status: WARNING: Makefile.conf.in seems to ignore the --datarootdir setting config.status: creating snddevices config.status: creating utils/alsa-driver.spec config.status: creating utils/buildrpm config.status: creating toplevel.config config.status: creating utils/alsasound config.status: creating utils/alsasound.posix config.status: creating include/pci_ids_compat.h config.status: creating include/i2c-id_compat.h config.status: creating include/config.h config.status: include/config.h is unchanged config.status: creating include/config1.h config.status: include/config1.h is unchanged config.status: creating include/version.h config.status: include/version.h is unchanged config.status: creating include/autoconf-extra.h config.status: include/autoconf-extra.h is unchanged Hacking autoconf.h... make[1]: Entering directory `/usr/src/alsa-driver/acore' copying file alsa-kernel/core/info.c patching file info.c Hunk #8 succeeded at 535 with fuzz 2. copying file alsa-kernel/core/pcm.c patching file pcm.c copying file alsa-kernel/core/pcm_native.c patching file pcm_native.c Hunk #4 succeeded at 1602 (offset 2 lines). Hunk #5 succeeded at 2857 (offset 17 lines). Hunk #6 succeeded at 2877 (offset 17 lines). Hunk #7 succeeded at 2907 (offset 17 lines). Hunk #8 succeeded at 2934 (offset 17 lines). Hunk #9 succeeded at 2950 (offset 17 lines). Hunk #10 succeeded at 2980 (offset 17 lines). Hunk #11 succeeded at 3066 (offset 17 lines). Hunk #12 succeeded at 3085 (offset 17 lines). Hunk #13 succeeded at 3099 (offset 17 lines). Hunk #14 succeeded at 3157 (offset 17 lines). Hunk #15 succeeded at 3185 (offset 17 lines). Hunk #16 succeeded at 3243 (offset 17 lines). Hunk #17 succeeded at 3272 (offset 17 lines). Hunk #18 succeeded at 3302 (offset 17 lines). Hunk #19 succeeded at 3379 (offset 17 lines). Hunk #20 succeeded at 3411 (offset 17 lines). Hunk #21 succeeded at 3477 (offset 17 lines). Hunk #22 succeeded at 3506 (offset 17 lines). Hunk #23 succeeded at 3547 (offset 17 lines). Hunk #24 succeeded at 3697 (offset 17 lines). copying file alsa-kernel/core/control.c patching file control.c Hunk #3 succeeded at 719 (offset 1 line). Hunk #4 succeeded at 786 (offset 1 line). Hunk #5 succeeded at 1394 (offset 1 line). copying file alsa-kernel/core/hwdep.c patching file hwdep.c copying file alsa-kernel/core/init.c patching file init.c Hunk #2 succeeded at 264 (offset 41 lines). Hunk #3 succeeded at 290 with fuzz 2 (offset 41 lines). copying file alsa-kernel/core/rawmidi.c patching file rawmidi.c Hunk #2 succeeded at 1289 (offset -1 lines). Hunk #3 succeeded at 1373 (offset -1 lines). copying file alsa-kernel/core/sound.c patching file sound.c copying file alsa-kernel/core/timer.c patching file timer.c Hunk #2 succeeded at 992 (offset 6 lines). Hunk #3 succeeded at 1914 (offset 19 lines). Hunk #4 succeeded at 1959 (offset 19 lines). copying file alsa-kernel/core/memalloc.c patching file memalloc.c copying file alsa-kernel/core/misc.c patching file misc.c Hunk #2 succeeded at 30 (offset -1 lines). Hunk #3 succeeded at 96 (offset -1 lines). make[2]: Entering directory `/usr/src/alsa-driver/acore/ioctl32' make[2]: Leaving directory `/usr/src/alsa-driver/acore/ioctl32' make[2]: Entering directory `/usr/src/alsa-driver/acore/oss' copying file alsa-kernel/core/oss/mixer_oss.c patching file mixer_oss.c copying file alsa-kernel/core/oss/pcm_oss.c patching file pcm_oss.c Hunk #2 succeeded at 2590 (offset 33 lines). Hunk #3 succeeded at 2641 (offset 33 lines). Hunk #4 succeeded at 2764 (offset 33 lines). Hunk #5 succeeded at 2947 (offset 33 lines). Hunk #6 succeeded at 3074 (offset 33 lines). make[2]: Leaving directory `/usr/src/alsa-driver/acore/oss' make[2]: Entering directory `/usr/src/alsa-driver/acore/seq' copying file alsa-kernel/core/seq/seq.c patching file seq.c Hunk #1 succeeded at 57 (offset 6 lines). copying file alsa-kernel/core/seq/seq_clientmgr.c patching file seq_clientmgr.c Hunk #3 succeeded at 2205 (offset -1 lines). Hunk #4 succeeded at 2553 (offset -1 lines). copying file alsa-kernel/core/seq/seq_memory.c patching file seq_memory.c Hunk #3 succeeded at 248 (offset 3 lines). make[3]: Entering directory `/usr/src/alsa-driver/acore/seq/oss' copying file alsa-kernel/core/seq/oss/seq_oss.c patching file seq_oss.c make[3]: Leaving directory `/usr/src/alsa-driver/acore/seq/oss' make[2]: Leaving directory `/usr/src/alsa-driver/acore/seq' make[1]: Leaving directory `/usr/src/alsa-driver/acore' make[1]: Entering directory `/usr/src/alsa-driver/i2c' make[2]: Entering directory `/usr/src/alsa-driver/i2c/l3' make[2]: Leaving directory `/usr/src/alsa-driver/i2c/l3' make[2]: Entering directory `/usr/src/alsa-driver/i2c/other' copying file alsa-kernel/i2c/other/tea575x-tuner.c patching file tea575x-tuner.c make[2]: Leaving directory `/usr/src/alsa-driver/i2c/other' make[1]: Leaving directory `/usr/src/alsa-driver/i2c' make[1]: Entering directory `/usr/src/alsa-driver/drivers' copying file alsa-kernel/drivers/mts64.c patching file mts64.c Hunk #1 succeeded at 834 (offset 4 lines). Hunk #2 succeeded at 1093 (offset 6 lines). copying file alsa-kernel/drivers/portman2x4.c patching file portman2x4.c Hunk #2 succeeded at 882 (offset 2 lines). make[2]: Entering directory `/usr/src/alsa-driver/drivers/mpu401' copying file alsa-kernel/drivers/mpu401/mpu401.c patching file mpu401.c make[2]: Leaving directory `/usr/src/alsa-driver/drivers/mpu401' make[2]: Entering directory `/usr/src/alsa-driver/drivers/opl3' copying file alsa-kernel/drivers/opl3/opl3_lib.c patching file opl3_lib.c Hunk #1 succeeded at 435 (offset 2 lines). make[2]: Leaving directory `/usr/src/alsa-driver/drivers/opl3' make[2]: Entering directory `/usr/src/alsa-driver/drivers/opl4' make[2]: Leaving directory `/usr/src/alsa-driver/drivers/opl4' make[2]: Entering directory `/usr/src/alsa-driver/drivers/pcsp' make[2]: Leaving directory `/usr/src/alsa-driver/drivers/pcsp' make[2]: Entering directory `/usr/src/alsa-driver/drivers/vx' make[2]: Leaving directory `/usr/src/alsa-driver/drivers/vx' make[1]: Leaving directory `/usr/src/alsa-driver/drivers' make[1]: Entering directory `/usr/src/alsa-driver/isa' make[2]: Entering directory `/usr/src/alsa-driver/isa/ad1816a' make[2]: Leaving directory `/usr/src/alsa-driver/isa/ad1816a' make[2]: Entering directory `/usr/src/alsa-driver/isa/ad1848' make[2]: Leaving directory `/usr/src/alsa-driver/isa/ad1848' make[2]: Entering directory `/usr/src/alsa-driver/isa/cs423x' make[2]: Leaving directory `/usr/src/alsa-driver/isa/cs423x' make[2]: Entering directory `/usr/src/alsa-driver/isa/es1688' make[2]: Leaving directory `/usr/src/alsa-driver/isa/es1688' make[2]: Entering directory `/usr/src/alsa-driver/isa/gus' make[2]: Leaving directory `/usr/src/alsa-driver/isa/gus' make[2]: Entering directory `/usr/src/alsa-driver/isa/msnd' make[2]: Leaving directory `/usr/src/alsa-driver/isa/msnd' make[2]: Entering directory `/usr/src/alsa-driver/isa/opti9xx' make[2]: Leaving directory `/usr/src/alsa-driver/isa/opti9xx' make[2]: Entering directory `/usr/src/alsa-driver/isa/sb' copying file alsa-kernel/isa/sb/sb16_csp.c patching file sb16_csp.c Hunk #1 succeeded at 730 (offset 7 lines). make[2]: Leaving directory `/usr/src/alsa-driver/isa/sb' make[2]: Entering directory `/usr/src/alsa-driver/isa/wavefront' copying file alsa-kernel/isa/wavefront/wavefront_fx.c patching file wavefront_fx.c copying file alsa-kernel/isa/wavefront/wavefront_synth.c patching file wavefront_synth.c make[2]: Leaving directory `/usr/src/alsa-driver/isa/wavefront' make[1]: Leaving directory `/usr/src/alsa-driver/isa' make[1]: Entering directory `/usr/src/alsa-driver/synth' make[2]: Entering directory `/usr/src/alsa-driver/synth/emux' make[2]: Leaving directory `/usr/src/alsa-driver/synth/emux' make[1]: Leaving directory `/usr/src/alsa-driver/synth' make[1]: Entering directory `/usr/src/alsa-driver/pci' copying file alsa-kernel/pci/ad1889.c patching file ad1889.c Hunk #1 succeeded at 53 with fuzz 2 (offset 1 line). copying file alsa-kernel/pci/atiixp.c patching file atiixp.c copying file alsa-kernel/pci/atiixp_modem.c patching file atiixp_modem.c copying file alsa-kernel/pci/bt87x.c patching file bt87x.c copying file alsa-kernel/pci/cmipci.c patching file cmipci.c Hunk #1 succeeded at 3132 (offset 197 lines). Hunk #2 succeeded at 3427 (offset 209 lines). copying file alsa-kernel/pci/ens1370.c patching file ens1370.c Hunk #1 succeeded at 2118 (offset -32 lines). Hunk #2 succeeded at 2494 (offset -32 lines). copying file alsa-kernel/pci/fm801.c patching file fm801.c copying file alsa-kernel/pci/intel8x0.c patching file intel8x0.c Hunk #2 succeeded at 704 (offset 3 lines). Hunk #3 succeeded at 715 (offset 3 lines). Hunk #4 succeeded at 3093 (offset 82 lines). copying file alsa-kernel/pci/maestro3.c patching file maestro3.c Hunk #1 succeeded at 2747 (offset 1 line). Hunk #2 succeeded at 2933 (offset 1 line). copying file alsa-kernel/pci/via82xx.c patching file via82xx.c Hunk #1 succeeded at 2433 (offset -1 lines). Hunk #2 succeeded at 2443 (offset -1 lines). Hunk #3 succeeded at 2458 (offset -1 lines). Hunk #4 succeeded at 2469 (offset -1 lines). Hunk #5 succeeded at 2480 (offset -1 lines). Hunk #6 succeeded at 2563 (offset -1 lines). copying file alsa-kernel/pci/via82xx_modem.c patching file via82xx_modem.c make[2]: Entering directory `/usr/src/alsa-driver/pci/ac97' copying file alsa-kernel/pci/ac97/ac97_codec.c patching file ac97_codec.c Hunk #2 succeeded at 1911 (offset 7 lines). Hunk #3 succeeded at 1923 (offset 7 lines). Hunk #4 succeeded at 1947 (offset 7 lines). make[2]: Leaving directory `/usr/src/alsa-driver/pci/ac97' make[2]: Entering directory `/usr/src/alsa-driver/pci/ali5451' copying file alsa-kernel/pci/ali5451/ali5451.c patching file ali5451.c Hunk #1 succeeded at 2209 (offset -8 lines). Hunk #2 succeeded at 2379 (offset -8 lines). make[2]: Leaving directory `/usr/src/alsa-driver/pci/ali5451' make[2]: Entering directory `/usr/src/alsa-driver/pci/asihpi' make[2]: Leaving directory `/usr/src/alsa-driver/pci/asihpi' make[2]: Entering directory `/usr/src/alsa-driver/pci/au88x0' copying file alsa-kernel/pci/au88x0/au88x0.c patching file au88x0.c Hunk #2 succeeded at 342 (offset 1 line). make[2]: Leaving directory `/usr/src/alsa-driver/pci/au88x0' make[2]: Entering directory `/usr/src/alsa-driver/pci/ca0106' copying file alsa-kernel/pci/ca0106/ca0106_main.c patching file ca0106_main.c Hunk #1 succeeded at 169 (offset 4 lines). Hunk #2 succeeded at 1361 (offset 44 lines). Hunk #3 succeeded at 1730 (offset 49 lines). make[2]: Leaving directory `/usr/src/alsa-driver/pci/ca0106' make[2]: Entering directory `/usr/src/alsa-driver/pci/cs46xx' make[2]: Leaving directory `/usr/src/alsa-driver/pci/cs46xx' make[2]: Entering directory `/usr/src/alsa-driver/pci/cs5535audio' make[2]: Leaving directory `/usr/src/alsa-driver/pci/cs5535audio' make[2]: Entering directory `/usr/src/alsa-driver/pci/echoaudio' copying file alsa-kernel/pci/echoaudio/echoaudio.c patching file echoaudio.c Hunk #1 succeeded at 1897 (offset -29 lines). Hunk #2 succeeded at 1960 (offset -29 lines). copying file alsa-kernel/pci/echoaudio/darla20.c patching file darla20.c Hunk #2 succeeded at 107 (offset 2 lines). copying file alsa-kernel/pci/echoaudio/darla24.c patching file darla24.c Hunk #2 succeeded at 114 (offset 2 lines). copying file alsa-kernel/pci/echoaudio/echo3g.c patching file echo3g.c Hunk #2 succeeded at 128 (offset 4 lines). copying file alsa-kernel/pci/echoaudio/gina20.c patching file gina20.c Hunk #2 succeeded at 111 (offset 2 lines). copying file alsa-kernel/pci/echoaudio/gina24.c patching file gina24.c Hunk #2 succeeded at 135 (offset 6 lines). copying file alsa-kernel/pci/echoaudio/indigo.c patching file indigo.c Hunk #2 succeeded at 113 (offset 3 lines). copying file alsa-kernel/pci/echoaudio/indigodj.c patching file indigodj.c Hunk #2 succeeded at 113 (offset 3 lines). copying file alsa-kernel/pci/echoaudio/indigoio.c patching file indigoio.c Hunk #2 succeeded at 114 (offset 3 lines). copying file alsa-kernel/pci/echoaudio/layla20.c patching file layla20.c Hunk #2 succeeded at 121 (offset 3 lines). copying file alsa-kernel/pci/echoaudio/layla24.c patching file layla24.c Hunk #2 succeeded at 133 (offset 6 lines). copying file alsa-kernel/pci/echoaudio/mia.c patching file mia.c Hunk #2 succeeded at 126 (offset 3 lines). copying file alsa-kernel/pci/echoaudio/mona.c patching file mona.c Hunk #2 succeeded at 144 (offset 9 lines). make[2]: Leaving directory `/usr/src/alsa-driver/pci/echoaudio' make[2]: Entering directory `/usr/src/alsa-driver/pci/emu10k1' copying file alsa-kernel/pci/emu10k1/emu10k1_main.c patching file emu10k1_main.c Hunk #4 succeeded at 1399 (offset 35 lines). Hunk #5 succeeded at 1432 (offset 35 lines). Hunk #6 succeeded at 1740 (offset 37 lines). copying file alsa-kernel/pci/emu10k1/emu10k1x.c patching file emu10k1x.c Hunk #2 succeeded at 1630 (offset -5 lines). make[2]: Leaving directory `/usr/src/alsa-driver/pci/emu10k1' make[2]: Entering directory `/usr/src/alsa-driver/pci/hda' copying file alsa-kernel/pci/hda/hda_codec.c patching file hda_codec.c Hunk #2 succeeded at 279 (offset 22 lines). Hunk #3 succeeded at 317 (offset 22 lines). Hunk #4 succeeded at 332 (offset 22 lines). Hunk #5 succeeded at 348 (offset 22 lines). make[2]: Leaving directory `/usr/src/alsa-driver/pci/hda' make[2]: Entering directory `/usr/src/alsa-driver/pci/ice1712' make[2]: Leaving directory `/usr/src/alsa-driver/pci/ice1712' make[2]: Entering directory `/usr/src/alsa-driver/pci/korg1212' copying file alsa-kernel/pci/korg1212/korg1212.c patching file korg1212.c Hunk #1 succeeded at 2353 (offset 10 lines). Hunk #2 succeeded at 2514 (offset 10 lines). make[2]: Leaving directory `/usr/src/alsa-driver/pci/korg1212' make[2]: Entering directory `/usr/src/alsa-driver/pci/mixart' make[2]: Leaving directory `/usr/src/alsa-driver/pci/mixart' make[2]: Entering directory `/usr/src/alsa-driver/pci/nm256' make[2]: Leaving directory `/usr/src/alsa-driver/pci/nm256' make[2]: Entering directory `/usr/src/alsa-driver/pci/oxygen' make[2]: Leaving directory `/usr/src/alsa-driver/pci/oxygen' make[2]: Entering directory `/usr/src/alsa-driver/pci/pcxhr' make[2]: Leaving directory `/usr/src/alsa-driver/pci/pcxhr' make[2]: Entering directory `/usr/src/alsa-driver/pci/pdplus' make[2]: Leaving directory `/usr/src/alsa-driver/pci/pdplus' make[2]: Entering directory `/usr/src/alsa-driver/pci/riptide' copying file alsa-kernel/pci/riptide/riptide.c patching file riptide.c Hunk #1 succeeded at 1279 (offset 10 lines). Hunk #2 succeeded at 2236 (offset 10 lines). make[2]: Leaving directory `/usr/src/alsa-driver/pci/riptide' make[2]: Entering directory `/usr/src/alsa-driver/pci/rme9652' make[2]: Leaving directory `/usr/src/alsa-driver/pci/rme9652' make[2]: Entering directory `/usr/src/alsa-driver/pci/trident' make[2]: Leaving directory `/usr/src/alsa-driver/pci/trident' make[2]: Entering directory `/usr/src/alsa-driver/pci/vx222' make[2]: Leaving directory `/usr/src/alsa-driver/pci/vx222' make[2]: Entering directory `/usr/src/alsa-driver/pci/ymfpci' copying file alsa-kernel/pci/ymfpci/ymfpci_main.c patching file ymfpci_main.c Hunk #2 succeeded at 2049 (offset -4 lines). Hunk #3 succeeded at 2071 (offset -4 lines). Hunk #4 succeeded at 2411 (offset -4 lines). make[2]: Leaving directory `/usr/src/alsa-driver/pci/ymfpci' make[1]: Leaving directory `/usr/src/alsa-driver/pci' make[1]: Entering directory `/usr/src/alsa-driver/aoa' make[2]: Entering directory `/usr/src/alsa-driver/aoa/codecs' make[2]: Leaving directory `/usr/src/alsa-driver/aoa/codecs' make[2]: Entering directory `/usr/src/alsa-driver/aoa/core' make[2]: Leaving directory `/usr/src/alsa-driver/aoa/core' make[2]: Entering directory `/usr/src/alsa-driver/aoa/fabrics' make[2]: Leaving directory `/usr/src/alsa-driver/aoa/fabrics' make[2]: Entering directory `/usr/src/alsa-driver/aoa/soundbus' make[3]: Entering directory `/usr/src/alsa-driver/aoa/soundbus/i2sbus' make[3]: Leaving directory `/usr/src/alsa-driver/aoa/soundbus/i2sbus' make[2]: Leaving directory `/usr/src/alsa-driver/aoa/soundbus' make[1]: Leaving directory `/usr/src/alsa-driver/aoa' make[1]: Entering directory `/usr/src/alsa-driver/soc' make[2]: Entering directory `/usr/src/alsa-driver/soc/at91' make[2]: Leaving directory `/usr/src/alsa-driver/soc/at91' make[2]: Entering directory `/usr/src/alsa-driver/soc/codecs' make[2]: Leaving directory `/usr/src/alsa-driver/soc/codecs' make[2]: Entering directory `/usr/src/alsa-driver/soc/pxa' make[2]: Leaving directory `/usr/src/alsa-driver/soc/pxa' make[2]: Entering directory `/usr/src/alsa-driver/soc/s3c24xx' make[2]: Leaving directory `/usr/src/alsa-driver/soc/s3c24xx' make[2]: Entering directory `/usr/src/alsa-driver/soc/sh' make[2]: Leaving directory `/usr/src/alsa-driver/soc/sh' make[1]: Leaving directory `/usr/src/alsa-driver/soc' make[1]: Entering directory `/usr/src/alsa-driver/usb' copying file alsa-kernel/usb/usbaudio.c patching file usbaudio.c Hunk #3 succeeded at 659 with fuzz 2 (offset -10 lines). Hunk #4 succeeded at 686 with fuzz 2 (offset -10 lines). Hunk #5 succeeded at 767 (offset -10 lines). Hunk #6 succeeded at 782 (offset -10 lines). Hunk #7 succeeded at 1160 (offset -10 lines). Hunk #8 succeeded at 2082 (offset 3 lines). Hunk #9 succeeded at 2101 (offset 3 lines). Hunk #10 succeeded at 2118 (offset 3 lines). Hunk #11 succeeded at 2675 (offset 13 lines). Hunk #12 succeeded at 2747 (offset 13 lines). Hunk #13 succeeded at 3035 (offset 17 lines). Hunk #14 succeeded at 3106 (offset 17 lines). Hunk #15 succeeded at 3227 (offset 69 lines). Hunk #16 succeeded at 3245 (offset 69 lines). Hunk #17 succeeded at 3259 (offset 69 lines). Hunk #18 succeeded at 3272 (offset 69 lines). Hunk #19 succeeded at 3476 (offset 77 lines). Hunk #20 succeeded at 3569 (offset 79 lines). Hunk #21 succeeded at 3706 (offset 78 lines). Hunk #22 succeeded at 3727 (offset 78 lines). Hunk #23 succeeded at 3748 (offset 78 lines). copying file alsa-kernel/usb/usbmidi.c patching file usbmidi.c Hunk #2 succeeded at 226 (offset 1 line). Hunk #3 succeeded at 250 (offset 1 line). Hunk #4 succeeded at 343 (offset 1 line). Hunk #5 succeeded at 1450 (offset 88 lines). Hunk #6 succeeded at 1798 (offset 92 lines). copying file alsa-kernel/usb/usbmixer.c patching file usbmixer.c Hunk #3 succeeded at 1730 (offset 4 lines). Hunk #4 succeeded at 1779 (offset 4 lines). Hunk #5 succeeded at 1800 (offset 4 lines). make[2]: Entering directory `/usr/src/alsa-driver/usb/caiaq' copying file alsa-kernel/usb/caiaq/caiaq-audio.c patching file caiaq-audio.c Hunk #1 succeeded at 462 (offset -2 lines). Hunk #2 succeeded at 520 (offset -2 lines). copying file alsa-kernel/usb/caiaq/caiaq-device.c patching file caiaq-device.c Hunk #1 succeeded at 114 (offset 14 lines). Hunk #2 succeeded at 364 (offset 65 lines). copying file alsa-kernel/usb/caiaq/caiaq-input.c patching file caiaq-input.c make[2]: Leaving directory `/usr/src/alsa-driver/usb/caiaq' make[2]: Entering directory `/usr/src/alsa-driver/usb/usx2y' copying file alsa-kernel/usb/usx2y/usX2Yhwdep.c patching file usX2Yhwdep.c copying file alsa-kernel/usb/usx2y/usbusx2y.c patching file usbusx2y.c copying file alsa-kernel/usb/usx2y/usbusx2yaudio.c patching file usbusx2yaudio.c Hunk #10 succeeded at 1057 (offset -1 lines). copying file alsa-kernel/usb/usx2y/usx2yhwdeppcm.c patching file usx2yhwdeppcm.c make[2]: Leaving directory `/usr/src/alsa-driver/usb/usx2y' make[1]: Leaving directory `/usr/src/alsa-driver/usb' make[1]: Entering directory `/usr/src/alsa-driver/pcmcia' make[2]: Entering directory `/usr/src/alsa-driver/pcmcia/pdaudiocf' make[2]: Leaving directory `/usr/src/alsa-driver/pcmcia/pdaudiocf' make[2]: Entering directory `/usr/src/alsa-driver/pcmcia/vx' make[2]: Leaving directory `/usr/src/alsa-driver/pcmcia/vx' make[1]: Leaving directory `/usr/src/alsa-driver/pcmcia' make[1]: Entering directory `/usr/src/alsa-driver/misc' make[1]: Leaving directory `/usr/src/alsa-driver/misc' make dep make[1]: Entering directory `/usr/src/alsa-driver' make[2]: Entering directory `/usr/src/alsa-driver/acore' make[3]: Entering directory `/usr/src/alsa-driver/acore/ioctl32' make[3]: Leaving directory `/usr/src/alsa-driver/acore/ioctl32' make[3]: Entering directory `/usr/src/alsa-driver/acore/oss' make[3]: Leaving directory `/usr/src/alsa-driver/acore/oss' make[3]: Entering directory `/usr/src/alsa-driver/acore/seq' make[4]: Entering directory `/usr/src/alsa-driver/acore/seq/oss' make[4]: Leaving directory `/usr/src/alsa-driver/acore/seq/oss' make[3]: Leaving directory `/usr/src/alsa-driver/acore/seq' make[2]: Leaving directory `/usr/src/alsa-driver/acore' make[2]: Entering directory `/usr/src/alsa-driver/i2c' make[3]: Entering directory `/usr/src/alsa-driver/i2c/l3' make[3]: Leaving directory `/usr/src/alsa-driver/i2c/l3' make[3]: Entering directory `/usr/src/alsa-driver/i2c/other' make[3]: Leaving directory `/usr/src/alsa-driver/i2c/other' make[2]: Leaving directory `/usr/src/alsa-driver/i2c' make[2]: Entering directory `/usr/src/alsa-driver/drivers' make[3]: Entering directory `/usr/src/alsa-driver/drivers/mpu401' make[3]: Leaving directory `/usr/src/alsa-driver/drivers/mpu401' make[3]: Entering directory `/usr/src/alsa-driver/drivers/opl3' make[3]: Leaving directory `/usr/src/alsa-driver/drivers/opl3' make[3]: Entering directory `/usr/src/alsa-driver/drivers/opl4' make[3]: Leaving directory `/usr/src/alsa-driver/drivers/opl4' make[3]: Entering directory `/usr/src/alsa-driver/drivers/pcsp' make[3]: Leaving directory `/usr/src/alsa-driver/drivers/pcsp' make[3]: Entering directory `/usr/src/alsa-driver/drivers/vx' make[3]: Leaving directory `/usr/src/alsa-driver/drivers/vx' make[2]: Leaving directory `/usr/src/alsa-driver/drivers' make[2]: Entering directory `/usr/src/alsa-driver/isa' make[3]: Entering directory `/usr/src/alsa-driver/isa/ad1816a' make[3]: Leaving directory `/usr/src/alsa-driver/isa/ad1816a' make[3]: Entering directory `/usr/src/alsa-driver/isa/ad1848' make[3]: Leaving directory `/usr/src/alsa-driver/isa/ad1848' make[3]: Entering directory `/usr/src/alsa-driver/isa/cs423x' make[3]: Leaving directory `/usr/src/alsa-driver/isa/cs423x' make[3]: Entering directory `/usr/src/alsa-driver/isa/es1688' make[3]: Leaving directory `/usr/src/alsa-driver/isa/es1688' make[3]: Entering directory `/usr/src/alsa-driver/isa/gus' make[3]: Leaving directory `/usr/src/alsa-driver/isa/gus' make[3]: Entering directory `/usr/src/alsa-driver/isa/msnd' make[3]: Leaving directory `/usr/src/alsa-driver/isa/msnd' make[3]: Entering directory `/usr/src/alsa-driver/isa/opti9xx' make[3]: Leaving directory `/usr/src/alsa-driver/isa/opti9xx' make[3]: Entering directory `/usr/src/alsa-driver/isa/sb' make[3]: Leaving directory `/usr/src/alsa-driver/isa/sb' make[3]: Entering directory `/usr/src/alsa-driver/isa/wavefront' make[3]: Leaving directory `/usr/src/alsa-driver/isa/wavefront' make[2]: Leaving directory `/usr/src/alsa-driver/isa' make[2]: Entering directory `/usr/src/alsa-driver/synth' make[3]: Entering directory `/usr/src/alsa-driver/synth/emux' make[3]: Leaving directory `/usr/src/alsa-driver/synth/emux' make[2]: Leaving directory `/usr/src/alsa-driver/synth' make[2]: Entering directory `/usr/src/alsa-driver/pci' make[3]: Entering directory `/usr/src/alsa-driver/pci/ac97' make[3]: Leaving directory `/usr/src/alsa-driver/pci/ac97' make[3]: Entering directory `/usr/src/alsa-driver/pci/ali5451' make[3]: Leaving directory `/usr/src/alsa-driver/pci/ali5451' make[3]: Entering directory `/usr/src/alsa-driver/pci/asihpi' make[3]: Leaving directory `/usr/src/alsa-driver/pci/asihpi' make[3]: Entering directory `/usr/src/alsa-driver/pci/au88x0' make[3]: Leaving directory `/usr/src/alsa-driver/pci/au88x0' make[3]: Entering directory `/usr/src/alsa-driver/pci/ca0106' make[3]: Leaving directory `/usr/src/alsa-driver/pci/ca0106' make[3]: Entering directory `/usr/src/alsa-driver/pci/cs46xx' make[3]: Leaving directory `/usr/src/alsa-driver/pci/cs46xx' make[3]: Entering directory `/usr/src/alsa-driver/pci/cs5535audio' make[3]: Leaving directory `/usr/src/alsa-driver/pci/cs5535audio' make[3]: Entering directory `/usr/src/alsa-driver/pci/echoaudio' make[3]: Leaving directory `/usr/src/alsa-driver/pci/echoaudio' make[3]: Entering directory `/usr/src/alsa-driver/pci/emu10k1' make[3]: Leaving directory `/usr/src/alsa-driver/pci/emu10k1' make[3]: Entering directory `/usr/src/alsa-driver/pci/hda' make[3]: Leaving directory `/usr/src/alsa-driver/pci/hda' make[3]: Entering directory `/usr/src/alsa-driver/pci/ice1712' make[3]: Leaving directory `/usr/src/alsa-driver/pci/ice1712' make[3]: Entering directory `/usr/src/alsa-driver/pci/korg1212' make[3]: Leaving directory `/usr/src/alsa-driver/pci/korg1212' make[3]: Entering directory `/usr/src/alsa-driver/pci/mixart' make[3]: Leaving directory `/usr/src/alsa-driver/pci/mixart' make[3]: Entering directory `/usr/src/alsa-driver/pci/nm256' make[3]: Leaving directory `/usr/src/alsa-driver/pci/nm256' make[3]: Entering directory `/usr/src/alsa-driver/pci/oxygen' make[3]: Leaving directory `/usr/src/alsa-driver/pci/oxygen' make[3]: Entering directory `/usr/src/alsa-driver/pci/pcxhr' make[3]: Leaving directory `/usr/src/alsa-driver/pci/pcxhr' make[3]: Entering directory `/usr/src/alsa-driver/pci/pdplus' make[3]: Leaving directory `/usr/src/alsa-driver/pci/pdplus' make[3]: Entering directory `/usr/src/alsa-driver/pci/riptide' make[3]: Leaving directory `/usr/src/alsa-driver/pci/riptide' make[3]: Entering directory `/usr/src/alsa-driver/pci/rme9652' make[3]: Leaving directory `/usr/src/alsa-driver/pci/rme9652' make[3]: Entering directory `/usr/src/alsa-driver/pci/trident' make[3]: Leaving directory `/usr/src/alsa-driver/pci/trident' make[3]: Entering directory `/usr/src/alsa-driver/pci/vx222' make[3]: Leaving directory `/usr/src/alsa-driver/pci/vx222' make[3]: Entering directory `/usr/src/alsa-driver/pci/ymfpci' make[3]: Leaving directory `/usr/src/alsa-driver/pci/ymfpci' make[2]: Leaving directory `/usr/src/alsa-driver/pci' make[2]: Entering directory `/usr/src/alsa-driver/aoa' make[3]: Entering directory `/usr/src/alsa-driver/aoa/codecs' make[3]: Leaving directory `/usr/src/alsa-driver/aoa/codecs' make[3]: Entering directory `/usr/src/alsa-driver/aoa/core' make[3]: Leaving directory `/usr/src/alsa-driver/aoa/core' make[3]: Entering directory `/usr/src/alsa-driver/aoa/fabrics' make[3]: Leaving directory `/usr/src/alsa-driver/aoa/fabrics' make[3]: Entering directory `/usr/src/alsa-driver/aoa/soundbus' make[4]: Entering directory `/usr/src/alsa-driver/aoa/soundbus/i2sbus' make[4]: Leaving directory `/usr/src/alsa-driver/aoa/soundbus/i2sbus' make[3]: Leaving directory `/usr/src/alsa-driver/aoa/soundbus' make[2]: Leaving directory `/usr/src/alsa-driver/aoa' make[2]: Entering directory `/usr/src/alsa-driver/soc' make[3]: Entering directory `/usr/src/alsa-driver/soc/at91' make[3]: Leaving directory `/usr/src/alsa-driver/soc/at91' make[3]: Entering directory `/usr/src/alsa-driver/soc/codecs' make[3]: Leaving directory `/usr/src/alsa-driver/soc/codecs' make[3]: Entering directory `/usr/src/alsa-driver/soc/pxa' make[3]: Leaving directory `/usr/src/alsa-driver/soc/pxa' make[3]: Entering directory `/usr/src/alsa-driver/soc/s3c24xx' make[3]: Leaving directory `/usr/src/alsa-driver/soc/s3c24xx' make[3]: Entering directory `/usr/src/alsa-driver/soc/sh' make[3]: Leaving directory `/usr/src/alsa-driver/soc/sh' make[2]: Leaving directory `/usr/src/alsa-driver/soc' make[2]: Entering directory `/usr/src/alsa-driver/usb' make[3]: Entering directory `/usr/src/alsa-driver/usb/caiaq' make[3]: Leaving directory `/usr/src/alsa-driver/usb/caiaq' make[3]: Entering directory `/usr/src/alsa-driver/usb/usx2y' make[3]: Leaving directory `/usr/src/alsa-driver/usb/usx2y' make[2]: Leaving directory `/usr/src/alsa-driver/usb' make[2]: Entering directory `/usr/src/alsa-driver/pcmcia' make[3]: Entering directory `/usr/src/alsa-driver/pcmcia/pdaudiocf' make[3]: Leaving directory `/usr/src/alsa-driver/pcmcia/pdaudiocf' make[3]: Entering directory `/usr/src/alsa-driver/pcmcia/vx' make[3]: Leaving directory `/usr/src/alsa-driver/pcmcia/vx' make[2]: Leaving directory `/usr/src/alsa-driver/pcmcia' make[2]: Entering directory `/usr/src/alsa-driver/misc' make[2]: Leaving directory `/usr/src/alsa-driver/misc' make[1]: Leaving directory `/usr/src/alsa-driver' make -C /lib/modules/2.6.23-gentoo-r3/source SUBDIRS=/usr/src/alsa-driver CPP="gcc -E" CC="gcc" modules make[1]: Entering directory `/usr/src/linux-2.6.23-gentoo-r3' CC [M] /usr/src/alsa-driver/acore/hwdep.o In file included from /usr/src/alsa-driver/include/adriver.h:930, from /usr/src/alsa-driver/include/sound/driver.h:42, from /usr/src/alsa-driver/acore/hwdep.c:22: include/linux/pci.h:556: error: expected identifier or '(' before numeric constant In file included from /usr/src/alsa-driver/include/sound/driver.h:42, from /usr/src/alsa-driver/acore/hwdep.c:22: /usr/src/alsa-driver/include/adriver.h: In function 'snd_pci_orig_save_state': /usr/src/alsa-driver/include/adriver.h:1172: error: too many arguments to function 'pci_save_state' /usr/src/alsa-driver/include/adriver.h: In function 'snd_pci_orig_restore_state': /usr/src/alsa-driver/include/adriver.h:1176: error: too many arguments to function 'pci_restore_state' make[3]: *** [/usr/src/alsa-driver/acore/hwdep.o] Error 1 make[2]: *** [/usr/src/alsa-driver/acore] Error 2 make[1]: *** [_module_/usr/src/alsa-driver] Error 2 make[1]: Leaving directory `/usr/src/linux-2.6.23-gentoo-r3' make: *** [compile] Error 2 ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: snd-hda-intel support for SPDIF-inwiht vt1708 card? 2007-12-19 4:49 ` John Stile @ 2007-12-19 5:22 ` Darryl House 2007-12-19 9:30 ` snd-hda-intel support for SPDIF-in wiht " Takashi Iwai 1 sibling, 0 replies; 8+ messages in thread From: Darryl House @ 2007-12-19 5:22 UTC (permalink / raw) To: alsa-devel I've reported that same bug a couple of times, it is why I joined this group a couple of days ago. I've been doing c/c++ forever, but I'm not all that great with m4... yet I think I need to try to tackle the configure for VIA platforms since I've had no responses to the bug reports. That's not meant to be inflammatory, I am just trying to contribute in any way I can... I have "fixed" the compilation errors on my VIA C7 platform, but I am not at all certain about the side effects. Please see bug report ID 0003650 for details on what changes I made to make it work. If someone else wants to take the reins, please do... like I said I won't be very quick about making the changes to the configure script. -- Darryl ----- Original Message ----- From: "John Stile" <john@stilen.com> To: "Takashi Iwai" <tiwai@suse.de> Cc: <alsa-devel@alsa-project.org> Sent: Tuesday, December 18, 2007 8:49 PM Subject: Re: [alsa-devel] snd-hda-intel support for SPDIF-inwiht vt1708 card? > On Tue, 2007-12-18 at 16:05 +0100, Takashi Iwai wrote: >> At Tue, 18 Dec 2007 08:28:06 -0800, >> John Stile wrote: >> > >> > On Tue, 2007-12-18 at 14:04 +0100, Takashi Iwai wrote: >> > > At Mon, 17 Dec 2007 10:27:27 -0800, >> > > John Stile wrote: >> > > > >> > > > I am trying to use a Via VT1708 audio card ( uses the >> > > > snd-hda-intel.ko >> > > > driver) to record from SPDIF-in. >> > > > >> > > > An off-list reply to my posting to alsa-users list suggested that >> > > > snd-hda-intel.ko might not support SPDIF-in with the VT1708 card, >> > > > which >> > > > brought me here. >> > > > >> > > > Can someone who works on the Intel HDA driver tell me if it >> > > > supports >> > > > SPDIF-in on the VT1708 audio card? >> > > >> > > It should be, but not tested well, I guess. >> > > >> > > The driver enables the SPDIF-in capability when BIOS sets the pin >> > > information properly. Check /proc/asound/card0/codec#* file whether >> > > you have any (activated) input pin node that supports SPDIF-in. >> > > >> > > >> > > Takashi >> > Thank you for your reply! >> > The output of your command is below. >> > spdif-out=Node 0x25 >> > spdif-in=Node 0x26 >> > Neither labeled inactive, >> > but spdif-in doesn't list a "Connection" line. >> >> Just because it's only for input (thus it has no "source"). >> >> > I have the latest bios: 1.03 (2007/08/23) (a beta bios is available). >> > Do I try the beta bios? >> >> I don't think so. Likely a driver bug. >> How about the patch below (against the latest HG version)? >> >> >> Takashi >> >> diff -r 2d3893cf030c pci/hda/patch_via.c >> --- a/pci/hda/patch_via.c Tue Dec 18 15:42:53 2007 +0100 >> +++ b/pci/hda/patch_via.c Tue Dec 18 17:48:00 2007 +0100 >> @@ -568,25 +568,27 @@ static int via_init(struct hda_codec *co >> if (IS_VT1708_VENDORID(codec->vendor_id)) { >> snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0, >> AC_VERB_SET_PIN_WIDGET_CONTROL, >> - 0x40); >> + PIN_OUT); >> snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0, >> AC_VERB_SET_EAPD_BTLENABLE, 0x02); >> } else if (IS_VT1709_10CH_VENDORID(codec->vendor_id) || >> IS_VT1709_6CH_VENDORID(codec->vendor_id)) { >> snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0, >> AC_VERB_SET_PIN_WIDGET_CONTROL, >> - 0x40); >> + PIN_OUT); >> snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0, >> AC_VERB_SET_EAPD_BTLENABLE, 0x02); >> } else if (IS_VT1708B_8CH_VENDORID(codec->vendor_id) || >> IS_VT1708B_4CH_VENDORID(codec->vendor_id)) { >> snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0, >> AC_VERB_SET_PIN_WIDGET_CONTROL, >> - 0x40); >> + PIN_OUT); >> snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0, >> AC_VERB_SET_EAPD_BTLENABLE, 0x02); >> } >> - } >> + } else /* enable SPDIF-input pin */ >> + snd_hda_codec_write(codec, spec->autocfg.dig_in_pin, 0, >> + AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN); >> >> return 0; >> } > > After making the changes by hand the compile failed. > This is the output: > gcc utils/mod-deps.c -o utils/mod-deps > utils/mod-deps --basedir /usr/src/alsa-driver/alsa-kernel --hiddendir > /usr/src/alsa-driver --versiondep > /usr/src/alsa-driver/kconfig-vers --makeconf > toplevel.config.in > can't handle word INPUT=y properly, supposing it's OK > can't handle word INPUT=SND_USB_CAIAQ properly, supposing it's OK > utils/mod-deps --basedir /usr/src/alsa-driver/alsa-kernel --hiddendir > /usr/src/alsa-driver --versiondep > /usr/src/alsa-driver/kconfig-vers --acinclude > acinclude.m4 > can't handle word INPUT=y properly, supposing it's OK > can't handle word INPUT=SND_USB_CAIAQ properly, supposing it's OK > utils/mod-deps --basedir /usr/src/alsa-driver/alsa-kernel --hiddendir > /usr/src/alsa-driver --versiondep > /usr/src/alsa-driver/kconfig-vers --include > include/config1.h.in > can't handle word INPUT=y properly, supposing it's OK > can't handle word INPUT=SND_USB_CAIAQ properly, supposing it's OK > ./configure --with-debug=full --with-isapnp=yes --with-sequencer=yes > checking for gcc... gcc > checking for C compiler default output file name... a.out > checking whether the C compiler works... yes > checking whether we are cross compiling... no > checking for suffix of executables... > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether gcc accepts -g... yes > checking for gcc option to accept ISO C89... none needed > checking for ranlib... ranlib > checking for a BSD-compatible install... /usr/bin/install -c > checking how to run the C preprocessor... gcc -E > checking for grep that handles long lines and -e... /bin/grep > checking for egrep... /bin/grep -E > checking for ANSI C header files... yes > checking for an ANSI C-conforming const... yes > checking for inline... inline > checking whether time.h and sys/time.h may both be included... yes > checking whether gcc needs -traditional... no > checking for current directory... /usr/src/alsa-driver > checking cross compile... > checking for directory with kernel source... > /lib/modules/2.6.23-gentoo-r3/source > checking for directory with kernel build... > /lib/modules/2.6.23-gentoo-r3/build > checking for kernel linux/version.h... yes > checking for kernel linux/autoconf.h... yes > checking for kernel version... 2.6.23-gentoo-r3 > checking for GCC version... Kernel compiler: gcc 4.1.2 (Gentoo 4.1.2 > p1.0.2) Used compiler: gcc (GCC) 4.1.2 (Gentoo 4.1.2 p1.0.2) > checking for built-in ALSA... no > checking for existing ALSA module... yes > checking for Red Hat kernel... auto > checking for Red Hat kernel... no > checking for SUSE kernel... auto > checking for SUSE kernel... no > checking for CONFIG_EXPERIMENTAL... yes > checking for kernel linux/config.h... no > Creating <linux/config.h>... > checking to modify of kernel linux/kmod.h... no > checking for kernel linux/utsrelease.h... yes > checking for kernel linux/compiler.h... yes > checking for kernel linux/pm.h... yes > checking for kernel linux/spinlock.h... yes > checking for kernel linux/irq.h... yes > checking for kernel linux/threads.h... yes > checking for kernel linux/rwsem.h... yes > checking for kernel linux/gameport.h... yes > checking for kernel media/v4l2-dev.h... yes > checking for kernel linux/devfs_fs_kernel.h... no > Creating a dummy <linux/devfs_fs_kernel.h>... > checking for kernel linux/highmem.h... yes > checking for kernel linux/workqueue.h... yes > checking for kernel linux/dma-mapping.h... yes > checking for kernel asm/hw_irq.h... yes > checking for kernel linux/device.h... yes > checking for kernel linux/platform_device.h... yes > checking for kernel linux/isa.h... yes > checking for kernel linux/jiffies.h... yes > checking for kernel linux/compat.h... yes > checking for kernel linux/log2.h... yes > checking for kernel linux/adb.h... yes > checking for kernel linux/cuda.h... yes > checking for kernel linux/pmu.h... yes > checking for kernel linux/moduleparam.h... yes > checking for kernel linux/syscalls.h... yes > checking for kernel linux/firmware.h... yes > checking for kernel linux/err.h... yes > checking for kernel linux/bitmap.h... yes > checking for kernel linux/mutex.h... yes > checking for kernel linux/latency.h... yes > checking for kernel linux/kthread.h... yes > checking for kernel asm/irq_regs.h... yes > checking for kernel module symbol versions... yes > checking for has ioport support... yes > checking for PCI support in kernel... yes > checking for I2C driver in kernel... module > checking for I2C_POWERMAC in kernel... unknown > checking for firmware loader... module > checking for input subsystem in kernel... yes > checking for directory to store kernel modules... > /lib/modules/2.6.23-gentoo-r3/kernel/sound > checking for verbose procfs... on > checking for verbose printk... on > checking for debug level... full > checking for ISA support in kernel... yes > checking for processor type... x86_32 > checking for ISA DMA API... yes > checking for SMP... yes > checking for Video device support in kernel... yes > checking for ISA PnP driver in kernel... yes > checking for PnP driver in kernel... yes > checking for Kernel ISA-PnP support... yes > checking for strlcpy... yes > checking for snprintf... yes > checking for vsnprintf... yes > checking for scnprintf... yes > checking for sscanf... yes > checking for vmalloc_to_page... no > checking for old kmod... no > checking for PDE... no > checking for pci_set_consistent_dma_mask... no > checking for pci_dev_present... no > checking for msleep... yes > checking for msleep_interrupt... yes > checking for msecs_to_jiffies... yes > checking for tty->count is the atomic type... no > checking for video_get_drvdata... no > checking for V4L1 layer... yes > checking for io_remap_pfn_range... no > checking for new io_remap_page_range... no > checking for kcalloc... no > checking for kstrdup... yes > checking for kzalloc... no > checking for create_workqueue with flags... no > checking for saved_config_space in pci_dev... no > checking for register_sound_special_device... no > checking for driver version... 1.0.15 > checking for sequencer support... yes > checking for OSS/Free emulation... yes > checking for OSS PCM plugin system inclusion... yes > checking for RTC callback support in kernel... no > checking for HPET support... no > checking for dynamic minor numbers... no > checking for support of old API... yes > checking for Procfs support... yes > checking for USB support... yes > checking for class_simple... no > checking for old driver suspend/resume callbacks... no > checking for removal of page-reservation for nopage/mmap... no > checking for nested class_device... no > checking for new IRQ handler... no > checking for gfp_t... no > checking for PnP suspend/resume... no > checking for new unlocked/compat_ioctl... no > checking for x86-compatible PC... yes > checking for High-Res timers... no > checking for kernel PCMCIA > checking for PCMCIA support... yes > checking for PC9800 support in kernel... no > checking for parallel port support... yes > checking for power management... yes > checking for CONFIG_HAS_DMA... yes > checking for which soundcards to compile driver for... all > configure: creating ./config.status > config.status: creating version > config.status: creating Makefile.conf > config.status: WARNING: Makefile.conf.in seems to ignore > the --datarootdir setting > config.status: creating snddevices > config.status: creating utils/alsa-driver.spec > config.status: creating utils/buildrpm > config.status: creating toplevel.config > config.status: creating utils/alsasound > config.status: creating utils/alsasound.posix > config.status: creating include/pci_ids_compat.h > config.status: creating include/i2c-id_compat.h > config.status: creating include/config.h > config.status: include/config.h is unchanged > config.status: creating include/config1.h > config.status: include/config1.h is unchanged > config.status: creating include/version.h > config.status: include/version.h is unchanged > config.status: creating include/autoconf-extra.h > config.status: include/autoconf-extra.h is unchanged > Hacking autoconf.h... > make[1]: Entering directory `/usr/src/alsa-driver/acore' > copying file alsa-kernel/core/info.c > patching file info.c > Hunk #8 succeeded at 535 with fuzz 2. > copying file alsa-kernel/core/pcm.c > patching file pcm.c > copying file alsa-kernel/core/pcm_native.c > patching file pcm_native.c > Hunk #4 succeeded at 1602 (offset 2 lines). > Hunk #5 succeeded at 2857 (offset 17 lines). > Hunk #6 succeeded at 2877 (offset 17 lines). > Hunk #7 succeeded at 2907 (offset 17 lines). > Hunk #8 succeeded at 2934 (offset 17 lines). > Hunk #9 succeeded at 2950 (offset 17 lines). > Hunk #10 succeeded at 2980 (offset 17 lines). > Hunk #11 succeeded at 3066 (offset 17 lines). > Hunk #12 succeeded at 3085 (offset 17 lines). > Hunk #13 succeeded at 3099 (offset 17 lines). > Hunk #14 succeeded at 3157 (offset 17 lines). > Hunk #15 succeeded at 3185 (offset 17 lines). > Hunk #16 succeeded at 3243 (offset 17 lines). > Hunk #17 succeeded at 3272 (offset 17 lines). > Hunk #18 succeeded at 3302 (offset 17 lines). > Hunk #19 succeeded at 3379 (offset 17 lines). > Hunk #20 succeeded at 3411 (offset 17 lines). > Hunk #21 succeeded at 3477 (offset 17 lines). > Hunk #22 succeeded at 3506 (offset 17 lines). > Hunk #23 succeeded at 3547 (offset 17 lines). > Hunk #24 succeeded at 3697 (offset 17 lines). > copying file alsa-kernel/core/control.c > patching file control.c > Hunk #3 succeeded at 719 (offset 1 line). > Hunk #4 succeeded at 786 (offset 1 line). > Hunk #5 succeeded at 1394 (offset 1 line). > copying file alsa-kernel/core/hwdep.c > patching file hwdep.c > copying file alsa-kernel/core/init.c > patching file init.c > Hunk #2 succeeded at 264 (offset 41 lines). > Hunk #3 succeeded at 290 with fuzz 2 (offset 41 lines). > copying file alsa-kernel/core/rawmidi.c > patching file rawmidi.c > Hunk #2 succeeded at 1289 (offset -1 lines). > Hunk #3 succeeded at 1373 (offset -1 lines). > copying file alsa-kernel/core/sound.c > patching file sound.c > copying file alsa-kernel/core/timer.c > patching file timer.c > Hunk #2 succeeded at 992 (offset 6 lines). > Hunk #3 succeeded at 1914 (offset 19 lines). > Hunk #4 succeeded at 1959 (offset 19 lines). > copying file alsa-kernel/core/memalloc.c > patching file memalloc.c > copying file alsa-kernel/core/misc.c > patching file misc.c > Hunk #2 succeeded at 30 (offset -1 lines). > Hunk #3 succeeded at 96 (offset -1 lines). > make[2]: Entering directory `/usr/src/alsa-driver/acore/ioctl32' > make[2]: Leaving directory `/usr/src/alsa-driver/acore/ioctl32' > make[2]: Entering directory `/usr/src/alsa-driver/acore/oss' > copying file alsa-kernel/core/oss/mixer_oss.c > patching file mixer_oss.c > copying file alsa-kernel/core/oss/pcm_oss.c > patching file pcm_oss.c > Hunk #2 succeeded at 2590 (offset 33 lines). > Hunk #3 succeeded at 2641 (offset 33 lines). > Hunk #4 succeeded at 2764 (offset 33 lines). > Hunk #5 succeeded at 2947 (offset 33 lines). > Hunk #6 succeeded at 3074 (offset 33 lines). > make[2]: Leaving directory `/usr/src/alsa-driver/acore/oss' > make[2]: Entering directory `/usr/src/alsa-driver/acore/seq' > copying file alsa-kernel/core/seq/seq.c > patching file seq.c > Hunk #1 succeeded at 57 (offset 6 lines). > copying file alsa-kernel/core/seq/seq_clientmgr.c > patching file seq_clientmgr.c > Hunk #3 succeeded at 2205 (offset -1 lines). > Hunk #4 succeeded at 2553 (offset -1 lines). > copying file alsa-kernel/core/seq/seq_memory.c > patching file seq_memory.c > Hunk #3 succeeded at 248 (offset 3 lines). > make[3]: Entering directory `/usr/src/alsa-driver/acore/seq/oss' > copying file alsa-kernel/core/seq/oss/seq_oss.c > patching file seq_oss.c > make[3]: Leaving directory `/usr/src/alsa-driver/acore/seq/oss' > make[2]: Leaving directory `/usr/src/alsa-driver/acore/seq' > make[1]: Leaving directory `/usr/src/alsa-driver/acore' > make[1]: Entering directory `/usr/src/alsa-driver/i2c' > make[2]: Entering directory `/usr/src/alsa-driver/i2c/l3' > make[2]: Leaving directory `/usr/src/alsa-driver/i2c/l3' > make[2]: Entering directory `/usr/src/alsa-driver/i2c/other' > copying file alsa-kernel/i2c/other/tea575x-tuner.c > patching file tea575x-tuner.c > make[2]: Leaving directory `/usr/src/alsa-driver/i2c/other' > make[1]: Leaving directory `/usr/src/alsa-driver/i2c' > make[1]: Entering directory `/usr/src/alsa-driver/drivers' > copying file alsa-kernel/drivers/mts64.c > patching file mts64.c > Hunk #1 succeeded at 834 (offset 4 lines). > Hunk #2 succeeded at 1093 (offset 6 lines). > copying file alsa-kernel/drivers/portman2x4.c > patching file portman2x4.c > Hunk #2 succeeded at 882 (offset 2 lines). > make[2]: Entering directory `/usr/src/alsa-driver/drivers/mpu401' > copying file alsa-kernel/drivers/mpu401/mpu401.c > patching file mpu401.c > make[2]: Leaving directory `/usr/src/alsa-driver/drivers/mpu401' > make[2]: Entering directory `/usr/src/alsa-driver/drivers/opl3' > copying file alsa-kernel/drivers/opl3/opl3_lib.c > patching file opl3_lib.c > Hunk #1 succeeded at 435 (offset 2 lines). > make[2]: Leaving directory `/usr/src/alsa-driver/drivers/opl3' > make[2]: Entering directory `/usr/src/alsa-driver/drivers/opl4' > make[2]: Leaving directory `/usr/src/alsa-driver/drivers/opl4' > make[2]: Entering directory `/usr/src/alsa-driver/drivers/pcsp' > make[2]: Leaving directory `/usr/src/alsa-driver/drivers/pcsp' > make[2]: Entering directory `/usr/src/alsa-driver/drivers/vx' > make[2]: Leaving directory `/usr/src/alsa-driver/drivers/vx' > make[1]: Leaving directory `/usr/src/alsa-driver/drivers' > make[1]: Entering directory `/usr/src/alsa-driver/isa' > make[2]: Entering directory `/usr/src/alsa-driver/isa/ad1816a' > make[2]: Leaving directory `/usr/src/alsa-driver/isa/ad1816a' > make[2]: Entering directory `/usr/src/alsa-driver/isa/ad1848' > make[2]: Leaving directory `/usr/src/alsa-driver/isa/ad1848' > make[2]: Entering directory `/usr/src/alsa-driver/isa/cs423x' > make[2]: Leaving directory `/usr/src/alsa-driver/isa/cs423x' > make[2]: Entering directory `/usr/src/alsa-driver/isa/es1688' > make[2]: Leaving directory `/usr/src/alsa-driver/isa/es1688' > make[2]: Entering directory `/usr/src/alsa-driver/isa/gus' > make[2]: Leaving directory `/usr/src/alsa-driver/isa/gus' > make[2]: Entering directory `/usr/src/alsa-driver/isa/msnd' > make[2]: Leaving directory `/usr/src/alsa-driver/isa/msnd' > make[2]: Entering directory `/usr/src/alsa-driver/isa/opti9xx' > make[2]: Leaving directory `/usr/src/alsa-driver/isa/opti9xx' > make[2]: Entering directory `/usr/src/alsa-driver/isa/sb' > copying file alsa-kernel/isa/sb/sb16_csp.c > patching file sb16_csp.c > Hunk #1 succeeded at 730 (offset 7 lines). > make[2]: Leaving directory `/usr/src/alsa-driver/isa/sb' > make[2]: Entering directory `/usr/src/alsa-driver/isa/wavefront' > copying file alsa-kernel/isa/wavefront/wavefront_fx.c > patching file wavefront_fx.c > copying file alsa-kernel/isa/wavefront/wavefront_synth.c > patching file wavefront_synth.c > make[2]: Leaving directory `/usr/src/alsa-driver/isa/wavefront' > make[1]: Leaving directory `/usr/src/alsa-driver/isa' > make[1]: Entering directory `/usr/src/alsa-driver/synth' > make[2]: Entering directory `/usr/src/alsa-driver/synth/emux' > make[2]: Leaving directory `/usr/src/alsa-driver/synth/emux' > make[1]: Leaving directory `/usr/src/alsa-driver/synth' > make[1]: Entering directory `/usr/src/alsa-driver/pci' > copying file alsa-kernel/pci/ad1889.c > patching file ad1889.c > Hunk #1 succeeded at 53 with fuzz 2 (offset 1 line). > copying file alsa-kernel/pci/atiixp.c > patching file atiixp.c > copying file alsa-kernel/pci/atiixp_modem.c > patching file atiixp_modem.c > copying file alsa-kernel/pci/bt87x.c > patching file bt87x.c > copying file alsa-kernel/pci/cmipci.c > patching file cmipci.c > Hunk #1 succeeded at 3132 (offset 197 lines). > Hunk #2 succeeded at 3427 (offset 209 lines). > copying file alsa-kernel/pci/ens1370.c > patching file ens1370.c > Hunk #1 succeeded at 2118 (offset -32 lines). > Hunk #2 succeeded at 2494 (offset -32 lines). > copying file alsa-kernel/pci/fm801.c > patching file fm801.c > copying file alsa-kernel/pci/intel8x0.c > patching file intel8x0.c > Hunk #2 succeeded at 704 (offset 3 lines). > Hunk #3 succeeded at 715 (offset 3 lines). > Hunk #4 succeeded at 3093 (offset 82 lines). > copying file alsa-kernel/pci/maestro3.c > patching file maestro3.c > Hunk #1 succeeded at 2747 (offset 1 line). > Hunk #2 succeeded at 2933 (offset 1 line). > copying file alsa-kernel/pci/via82xx.c > patching file via82xx.c > Hunk #1 succeeded at 2433 (offset -1 lines). > Hunk #2 succeeded at 2443 (offset -1 lines). > Hunk #3 succeeded at 2458 (offset -1 lines). > Hunk #4 succeeded at 2469 (offset -1 lines). > Hunk #5 succeeded at 2480 (offset -1 lines). > Hunk #6 succeeded at 2563 (offset -1 lines). > copying file alsa-kernel/pci/via82xx_modem.c > patching file via82xx_modem.c > make[2]: Entering directory `/usr/src/alsa-driver/pci/ac97' > copying file alsa-kernel/pci/ac97/ac97_codec.c > patching file ac97_codec.c > Hunk #2 succeeded at 1911 (offset 7 lines). > Hunk #3 succeeded at 1923 (offset 7 lines). > Hunk #4 succeeded at 1947 (offset 7 lines). > make[2]: Leaving directory `/usr/src/alsa-driver/pci/ac97' > make[2]: Entering directory `/usr/src/alsa-driver/pci/ali5451' > copying file alsa-kernel/pci/ali5451/ali5451.c > patching file ali5451.c > Hunk #1 succeeded at 2209 (offset -8 lines). > Hunk #2 succeeded at 2379 (offset -8 lines). > make[2]: Leaving directory `/usr/src/alsa-driver/pci/ali5451' > make[2]: Entering directory `/usr/src/alsa-driver/pci/asihpi' > make[2]: Leaving directory `/usr/src/alsa-driver/pci/asihpi' > make[2]: Entering directory `/usr/src/alsa-driver/pci/au88x0' > copying file alsa-kernel/pci/au88x0/au88x0.c > patching file au88x0.c > Hunk #2 succeeded at 342 (offset 1 line). > make[2]: Leaving directory `/usr/src/alsa-driver/pci/au88x0' > make[2]: Entering directory `/usr/src/alsa-driver/pci/ca0106' > copying file alsa-kernel/pci/ca0106/ca0106_main.c > patching file ca0106_main.c > Hunk #1 succeeded at 169 (offset 4 lines). > Hunk #2 succeeded at 1361 (offset 44 lines). > Hunk #3 succeeded at 1730 (offset 49 lines). > make[2]: Leaving directory `/usr/src/alsa-driver/pci/ca0106' > make[2]: Entering directory `/usr/src/alsa-driver/pci/cs46xx' > make[2]: Leaving directory `/usr/src/alsa-driver/pci/cs46xx' > make[2]: Entering directory `/usr/src/alsa-driver/pci/cs5535audio' > make[2]: Leaving directory `/usr/src/alsa-driver/pci/cs5535audio' > make[2]: Entering directory `/usr/src/alsa-driver/pci/echoaudio' > copying file alsa-kernel/pci/echoaudio/echoaudio.c > patching file echoaudio.c > Hunk #1 succeeded at 1897 (offset -29 lines). > Hunk #2 succeeded at 1960 (offset -29 lines). > copying file alsa-kernel/pci/echoaudio/darla20.c > patching file darla20.c > Hunk #2 succeeded at 107 (offset 2 lines). > copying file alsa-kernel/pci/echoaudio/darla24.c > patching file darla24.c > Hunk #2 succeeded at 114 (offset 2 lines). > copying file alsa-kernel/pci/echoaudio/echo3g.c > patching file echo3g.c > Hunk #2 succeeded at 128 (offset 4 lines). > copying file alsa-kernel/pci/echoaudio/gina20.c > patching file gina20.c > Hunk #2 succeeded at 111 (offset 2 lines). > copying file alsa-kernel/pci/echoaudio/gina24.c > patching file gina24.c > Hunk #2 succeeded at 135 (offset 6 lines). > copying file alsa-kernel/pci/echoaudio/indigo.c > patching file indigo.c > Hunk #2 succeeded at 113 (offset 3 lines). > copying file alsa-kernel/pci/echoaudio/indigodj.c > patching file indigodj.c > Hunk #2 succeeded at 113 (offset 3 lines). > copying file alsa-kernel/pci/echoaudio/indigoio.c > patching file indigoio.c > Hunk #2 succeeded at 114 (offset 3 lines). > copying file alsa-kernel/pci/echoaudio/layla20.c > patching file layla20.c > Hunk #2 succeeded at 121 (offset 3 lines). > copying file alsa-kernel/pci/echoaudio/layla24.c > patching file layla24.c > Hunk #2 succeeded at 133 (offset 6 lines). > copying file alsa-kernel/pci/echoaudio/mia.c > patching file mia.c > Hunk #2 succeeded at 126 (offset 3 lines). > copying file alsa-kernel/pci/echoaudio/mona.c > patching file mona.c > Hunk #2 succeeded at 144 (offset 9 lines). > make[2]: Leaving directory `/usr/src/alsa-driver/pci/echoaudio' > make[2]: Entering directory `/usr/src/alsa-driver/pci/emu10k1' > copying file alsa-kernel/pci/emu10k1/emu10k1_main.c > patching file emu10k1_main.c > Hunk #4 succeeded at 1399 (offset 35 lines). > Hunk #5 succeeded at 1432 (offset 35 lines). > Hunk #6 succeeded at 1740 (offset 37 lines). > copying file alsa-kernel/pci/emu10k1/emu10k1x.c > patching file emu10k1x.c > Hunk #2 succeeded at 1630 (offset -5 lines). > make[2]: Leaving directory `/usr/src/alsa-driver/pci/emu10k1' > make[2]: Entering directory `/usr/src/alsa-driver/pci/hda' > copying file alsa-kernel/pci/hda/hda_codec.c > patching file hda_codec.c > Hunk #2 succeeded at 279 (offset 22 lines). > Hunk #3 succeeded at 317 (offset 22 lines). > Hunk #4 succeeded at 332 (offset 22 lines). > Hunk #5 succeeded at 348 (offset 22 lines). > make[2]: Leaving directory `/usr/src/alsa-driver/pci/hda' > make[2]: Entering directory `/usr/src/alsa-driver/pci/ice1712' > make[2]: Leaving directory `/usr/src/alsa-driver/pci/ice1712' > make[2]: Entering directory `/usr/src/alsa-driver/pci/korg1212' > copying file alsa-kernel/pci/korg1212/korg1212.c > patching file korg1212.c > Hunk #1 succeeded at 2353 (offset 10 lines). > Hunk #2 succeeded at 2514 (offset 10 lines). > make[2]: Leaving directory `/usr/src/alsa-driver/pci/korg1212' > make[2]: Entering directory `/usr/src/alsa-driver/pci/mixart' > make[2]: Leaving directory `/usr/src/alsa-driver/pci/mixart' > make[2]: Entering directory `/usr/src/alsa-driver/pci/nm256' > make[2]: Leaving directory `/usr/src/alsa-driver/pci/nm256' > make[2]: Entering directory `/usr/src/alsa-driver/pci/oxygen' > make[2]: Leaving directory `/usr/src/alsa-driver/pci/oxygen' > make[2]: Entering directory `/usr/src/alsa-driver/pci/pcxhr' > make[2]: Leaving directory `/usr/src/alsa-driver/pci/pcxhr' > make[2]: Entering directory `/usr/src/alsa-driver/pci/pdplus' > make[2]: Leaving directory `/usr/src/alsa-driver/pci/pdplus' > make[2]: Entering directory `/usr/src/alsa-driver/pci/riptide' > copying file alsa-kernel/pci/riptide/riptide.c > patching file riptide.c > Hunk #1 succeeded at 1279 (offset 10 lines). > Hunk #2 succeeded at 2236 (offset 10 lines). > make[2]: Leaving directory `/usr/src/alsa-driver/pci/riptide' > make[2]: Entering directory `/usr/src/alsa-driver/pci/rme9652' > make[2]: Leaving directory `/usr/src/alsa-driver/pci/rme9652' > make[2]: Entering directory `/usr/src/alsa-driver/pci/trident' > make[2]: Leaving directory `/usr/src/alsa-driver/pci/trident' > make[2]: Entering directory `/usr/src/alsa-driver/pci/vx222' > make[2]: Leaving directory `/usr/src/alsa-driver/pci/vx222' > make[2]: Entering directory `/usr/src/alsa-driver/pci/ymfpci' > copying file alsa-kernel/pci/ymfpci/ymfpci_main.c > patching file ymfpci_main.c > Hunk #2 succeeded at 2049 (offset -4 lines). > Hunk #3 succeeded at 2071 (offset -4 lines). > Hunk #4 succeeded at 2411 (offset -4 lines). > make[2]: Leaving directory `/usr/src/alsa-driver/pci/ymfpci' > make[1]: Leaving directory `/usr/src/alsa-driver/pci' > make[1]: Entering directory `/usr/src/alsa-driver/aoa' > make[2]: Entering directory `/usr/src/alsa-driver/aoa/codecs' > make[2]: Leaving directory `/usr/src/alsa-driver/aoa/codecs' > make[2]: Entering directory `/usr/src/alsa-driver/aoa/core' > make[2]: Leaving directory `/usr/src/alsa-driver/aoa/core' > make[2]: Entering directory `/usr/src/alsa-driver/aoa/fabrics' > make[2]: Leaving directory `/usr/src/alsa-driver/aoa/fabrics' > make[2]: Entering directory `/usr/src/alsa-driver/aoa/soundbus' > make[3]: Entering directory `/usr/src/alsa-driver/aoa/soundbus/i2sbus' > make[3]: Leaving directory `/usr/src/alsa-driver/aoa/soundbus/i2sbus' > make[2]: Leaving directory `/usr/src/alsa-driver/aoa/soundbus' > make[1]: Leaving directory `/usr/src/alsa-driver/aoa' > make[1]: Entering directory `/usr/src/alsa-driver/soc' > make[2]: Entering directory `/usr/src/alsa-driver/soc/at91' > make[2]: Leaving directory `/usr/src/alsa-driver/soc/at91' > make[2]: Entering directory `/usr/src/alsa-driver/soc/codecs' > make[2]: Leaving directory `/usr/src/alsa-driver/soc/codecs' > make[2]: Entering directory `/usr/src/alsa-driver/soc/pxa' > make[2]: Leaving directory `/usr/src/alsa-driver/soc/pxa' > make[2]: Entering directory `/usr/src/alsa-driver/soc/s3c24xx' > make[2]: Leaving directory `/usr/src/alsa-driver/soc/s3c24xx' > make[2]: Entering directory `/usr/src/alsa-driver/soc/sh' > make[2]: Leaving directory `/usr/src/alsa-driver/soc/sh' > make[1]: Leaving directory `/usr/src/alsa-driver/soc' > make[1]: Entering directory `/usr/src/alsa-driver/usb' > copying file alsa-kernel/usb/usbaudio.c > patching file usbaudio.c > Hunk #3 succeeded at 659 with fuzz 2 (offset -10 lines). > Hunk #4 succeeded at 686 with fuzz 2 (offset -10 lines). > Hunk #5 succeeded at 767 (offset -10 lines). > Hunk #6 succeeded at 782 (offset -10 lines). > Hunk #7 succeeded at 1160 (offset -10 lines). > Hunk #8 succeeded at 2082 (offset 3 lines). > Hunk #9 succeeded at 2101 (offset 3 lines). > Hunk #10 succeeded at 2118 (offset 3 lines). > Hunk #11 succeeded at 2675 (offset 13 lines). > Hunk #12 succeeded at 2747 (offset 13 lines). > Hunk #13 succeeded at 3035 (offset 17 lines). > Hunk #14 succeeded at 3106 (offset 17 lines). > Hunk #15 succeeded at 3227 (offset 69 lines). > Hunk #16 succeeded at 3245 (offset 69 lines). > Hunk #17 succeeded at 3259 (offset 69 lines). > Hunk #18 succeeded at 3272 (offset 69 lines). > Hunk #19 succeeded at 3476 (offset 77 lines). > Hunk #20 succeeded at 3569 (offset 79 lines). > Hunk #21 succeeded at 3706 (offset 78 lines). > Hunk #22 succeeded at 3727 (offset 78 lines). > Hunk #23 succeeded at 3748 (offset 78 lines). > copying file alsa-kernel/usb/usbmidi.c > patching file usbmidi.c > Hunk #2 succeeded at 226 (offset 1 line). > Hunk #3 succeeded at 250 (offset 1 line). > Hunk #4 succeeded at 343 (offset 1 line). > Hunk #5 succeeded at 1450 (offset 88 lines). > Hunk #6 succeeded at 1798 (offset 92 lines). > copying file alsa-kernel/usb/usbmixer.c > patching file usbmixer.c > Hunk #3 succeeded at 1730 (offset 4 lines). > Hunk #4 succeeded at 1779 (offset 4 lines). > Hunk #5 succeeded at 1800 (offset 4 lines). > make[2]: Entering directory `/usr/src/alsa-driver/usb/caiaq' > copying file alsa-kernel/usb/caiaq/caiaq-audio.c > patching file caiaq-audio.c > Hunk #1 succeeded at 462 (offset -2 lines). > Hunk #2 succeeded at 520 (offset -2 lines). > copying file alsa-kernel/usb/caiaq/caiaq-device.c > patching file caiaq-device.c > Hunk #1 succeeded at 114 (offset 14 lines). > Hunk #2 succeeded at 364 (offset 65 lines). > copying file alsa-kernel/usb/caiaq/caiaq-input.c > patching file caiaq-input.c > make[2]: Leaving directory `/usr/src/alsa-driver/usb/caiaq' > make[2]: Entering directory `/usr/src/alsa-driver/usb/usx2y' > copying file alsa-kernel/usb/usx2y/usX2Yhwdep.c > patching file usX2Yhwdep.c > copying file alsa-kernel/usb/usx2y/usbusx2y.c > patching file usbusx2y.c > copying file alsa-kernel/usb/usx2y/usbusx2yaudio.c > patching file usbusx2yaudio.c > Hunk #10 succeeded at 1057 (offset -1 lines). > copying file alsa-kernel/usb/usx2y/usx2yhwdeppcm.c > patching file usx2yhwdeppcm.c > make[2]: Leaving directory `/usr/src/alsa-driver/usb/usx2y' > make[1]: Leaving directory `/usr/src/alsa-driver/usb' > make[1]: Entering directory `/usr/src/alsa-driver/pcmcia' > make[2]: Entering directory `/usr/src/alsa-driver/pcmcia/pdaudiocf' > make[2]: Leaving directory `/usr/src/alsa-driver/pcmcia/pdaudiocf' > make[2]: Entering directory `/usr/src/alsa-driver/pcmcia/vx' > make[2]: Leaving directory `/usr/src/alsa-driver/pcmcia/vx' > make[1]: Leaving directory `/usr/src/alsa-driver/pcmcia' > make[1]: Entering directory `/usr/src/alsa-driver/misc' > make[1]: Leaving directory `/usr/src/alsa-driver/misc' > make dep > make[1]: Entering directory `/usr/src/alsa-driver' > make[2]: Entering directory `/usr/src/alsa-driver/acore' > make[3]: Entering directory `/usr/src/alsa-driver/acore/ioctl32' > make[3]: Leaving directory `/usr/src/alsa-driver/acore/ioctl32' > make[3]: Entering directory `/usr/src/alsa-driver/acore/oss' > make[3]: Leaving directory `/usr/src/alsa-driver/acore/oss' > make[3]: Entering directory `/usr/src/alsa-driver/acore/seq' > make[4]: Entering directory `/usr/src/alsa-driver/acore/seq/oss' > make[4]: Leaving directory `/usr/src/alsa-driver/acore/seq/oss' > make[3]: Leaving directory `/usr/src/alsa-driver/acore/seq' > make[2]: Leaving directory `/usr/src/alsa-driver/acore' > make[2]: Entering directory `/usr/src/alsa-driver/i2c' > make[3]: Entering directory `/usr/src/alsa-driver/i2c/l3' > make[3]: Leaving directory `/usr/src/alsa-driver/i2c/l3' > make[3]: Entering directory `/usr/src/alsa-driver/i2c/other' > make[3]: Leaving directory `/usr/src/alsa-driver/i2c/other' > make[2]: Leaving directory `/usr/src/alsa-driver/i2c' > make[2]: Entering directory `/usr/src/alsa-driver/drivers' > make[3]: Entering directory `/usr/src/alsa-driver/drivers/mpu401' > make[3]: Leaving directory `/usr/src/alsa-driver/drivers/mpu401' > make[3]: Entering directory `/usr/src/alsa-driver/drivers/opl3' > make[3]: Leaving directory `/usr/src/alsa-driver/drivers/opl3' > make[3]: Entering directory `/usr/src/alsa-driver/drivers/opl4' > make[3]: Leaving directory `/usr/src/alsa-driver/drivers/opl4' > make[3]: Entering directory `/usr/src/alsa-driver/drivers/pcsp' > make[3]: Leaving directory `/usr/src/alsa-driver/drivers/pcsp' > make[3]: Entering directory `/usr/src/alsa-driver/drivers/vx' > make[3]: Leaving directory `/usr/src/alsa-driver/drivers/vx' > make[2]: Leaving directory `/usr/src/alsa-driver/drivers' > make[2]: Entering directory `/usr/src/alsa-driver/isa' > make[3]: Entering directory `/usr/src/alsa-driver/isa/ad1816a' > make[3]: Leaving directory `/usr/src/alsa-driver/isa/ad1816a' > make[3]: Entering directory `/usr/src/alsa-driver/isa/ad1848' > make[3]: Leaving directory `/usr/src/alsa-driver/isa/ad1848' > make[3]: Entering directory `/usr/src/alsa-driver/isa/cs423x' > make[3]: Leaving directory `/usr/src/alsa-driver/isa/cs423x' > make[3]: Entering directory `/usr/src/alsa-driver/isa/es1688' > make[3]: Leaving directory `/usr/src/alsa-driver/isa/es1688' > make[3]: Entering directory `/usr/src/alsa-driver/isa/gus' > make[3]: Leaving directory `/usr/src/alsa-driver/isa/gus' > make[3]: Entering directory `/usr/src/alsa-driver/isa/msnd' > make[3]: Leaving directory `/usr/src/alsa-driver/isa/msnd' > make[3]: Entering directory `/usr/src/alsa-driver/isa/opti9xx' > make[3]: Leaving directory `/usr/src/alsa-driver/isa/opti9xx' > make[3]: Entering directory `/usr/src/alsa-driver/isa/sb' > make[3]: Leaving directory `/usr/src/alsa-driver/isa/sb' > make[3]: Entering directory `/usr/src/alsa-driver/isa/wavefront' > make[3]: Leaving directory `/usr/src/alsa-driver/isa/wavefront' > make[2]: Leaving directory `/usr/src/alsa-driver/isa' > make[2]: Entering directory `/usr/src/alsa-driver/synth' > make[3]: Entering directory `/usr/src/alsa-driver/synth/emux' > make[3]: Leaving directory `/usr/src/alsa-driver/synth/emux' > make[2]: Leaving directory `/usr/src/alsa-driver/synth' > make[2]: Entering directory `/usr/src/alsa-driver/pci' > make[3]: Entering directory `/usr/src/alsa-driver/pci/ac97' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/ac97' > make[3]: Entering directory `/usr/src/alsa-driver/pci/ali5451' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/ali5451' > make[3]: Entering directory `/usr/src/alsa-driver/pci/asihpi' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/asihpi' > make[3]: Entering directory `/usr/src/alsa-driver/pci/au88x0' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/au88x0' > make[3]: Entering directory `/usr/src/alsa-driver/pci/ca0106' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/ca0106' > make[3]: Entering directory `/usr/src/alsa-driver/pci/cs46xx' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/cs46xx' > make[3]: Entering directory `/usr/src/alsa-driver/pci/cs5535audio' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/cs5535audio' > make[3]: Entering directory `/usr/src/alsa-driver/pci/echoaudio' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/echoaudio' > make[3]: Entering directory `/usr/src/alsa-driver/pci/emu10k1' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/emu10k1' > make[3]: Entering directory `/usr/src/alsa-driver/pci/hda' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/hda' > make[3]: Entering directory `/usr/src/alsa-driver/pci/ice1712' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/ice1712' > make[3]: Entering directory `/usr/src/alsa-driver/pci/korg1212' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/korg1212' > make[3]: Entering directory `/usr/src/alsa-driver/pci/mixart' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/mixart' > make[3]: Entering directory `/usr/src/alsa-driver/pci/nm256' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/nm256' > make[3]: Entering directory `/usr/src/alsa-driver/pci/oxygen' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/oxygen' > make[3]: Entering directory `/usr/src/alsa-driver/pci/pcxhr' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/pcxhr' > make[3]: Entering directory `/usr/src/alsa-driver/pci/pdplus' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/pdplus' > make[3]: Entering directory `/usr/src/alsa-driver/pci/riptide' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/riptide' > make[3]: Entering directory `/usr/src/alsa-driver/pci/rme9652' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/rme9652' > make[3]: Entering directory `/usr/src/alsa-driver/pci/trident' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/trident' > make[3]: Entering directory `/usr/src/alsa-driver/pci/vx222' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/vx222' > make[3]: Entering directory `/usr/src/alsa-driver/pci/ymfpci' > make[3]: Leaving directory `/usr/src/alsa-driver/pci/ymfpci' > make[2]: Leaving directory `/usr/src/alsa-driver/pci' > make[2]: Entering directory `/usr/src/alsa-driver/aoa' > make[3]: Entering directory `/usr/src/alsa-driver/aoa/codecs' > make[3]: Leaving directory `/usr/src/alsa-driver/aoa/codecs' > make[3]: Entering directory `/usr/src/alsa-driver/aoa/core' > make[3]: Leaving directory `/usr/src/alsa-driver/aoa/core' > make[3]: Entering directory `/usr/src/alsa-driver/aoa/fabrics' > make[3]: Leaving directory `/usr/src/alsa-driver/aoa/fabrics' > make[3]: Entering directory `/usr/src/alsa-driver/aoa/soundbus' > make[4]: Entering directory `/usr/src/alsa-driver/aoa/soundbus/i2sbus' > make[4]: Leaving directory `/usr/src/alsa-driver/aoa/soundbus/i2sbus' > make[3]: Leaving directory `/usr/src/alsa-driver/aoa/soundbus' > make[2]: Leaving directory `/usr/src/alsa-driver/aoa' > make[2]: Entering directory `/usr/src/alsa-driver/soc' > make[3]: Entering directory `/usr/src/alsa-driver/soc/at91' > make[3]: Leaving directory `/usr/src/alsa-driver/soc/at91' > make[3]: Entering directory `/usr/src/alsa-driver/soc/codecs' > make[3]: Leaving directory `/usr/src/alsa-driver/soc/codecs' > make[3]: Entering directory `/usr/src/alsa-driver/soc/pxa' > make[3]: Leaving directory `/usr/src/alsa-driver/soc/pxa' > make[3]: Entering directory `/usr/src/alsa-driver/soc/s3c24xx' > make[3]: Leaving directory `/usr/src/alsa-driver/soc/s3c24xx' > make[3]: Entering directory `/usr/src/alsa-driver/soc/sh' > make[3]: Leaving directory `/usr/src/alsa-driver/soc/sh' > make[2]: Leaving directory `/usr/src/alsa-driver/soc' > make[2]: Entering directory `/usr/src/alsa-driver/usb' > make[3]: Entering directory `/usr/src/alsa-driver/usb/caiaq' > make[3]: Leaving directory `/usr/src/alsa-driver/usb/caiaq' > make[3]: Entering directory `/usr/src/alsa-driver/usb/usx2y' > make[3]: Leaving directory `/usr/src/alsa-driver/usb/usx2y' > make[2]: Leaving directory `/usr/src/alsa-driver/usb' > make[2]: Entering directory `/usr/src/alsa-driver/pcmcia' > make[3]: Entering directory `/usr/src/alsa-driver/pcmcia/pdaudiocf' > make[3]: Leaving directory `/usr/src/alsa-driver/pcmcia/pdaudiocf' > make[3]: Entering directory `/usr/src/alsa-driver/pcmcia/vx' > make[3]: Leaving directory `/usr/src/alsa-driver/pcmcia/vx' > make[2]: Leaving directory `/usr/src/alsa-driver/pcmcia' > make[2]: Entering directory `/usr/src/alsa-driver/misc' > make[2]: Leaving directory `/usr/src/alsa-driver/misc' > make[1]: Leaving directory `/usr/src/alsa-driver' > make -C /lib/modules/2.6.23-gentoo-r3/source SUBDIRS=/usr/src/alsa-driver > CPP="gcc -E" CC="gcc" modules > make[1]: Entering directory `/usr/src/linux-2.6.23-gentoo-r3' > CC [M] /usr/src/alsa-driver/acore/hwdep.o > In file included from /usr/src/alsa-driver/include/adriver.h:930, > from /usr/src/alsa-driver/include/sound/driver.h:42, > from /usr/src/alsa-driver/acore/hwdep.c:22: > include/linux/pci.h:556: error: expected identifier or '(' before numeric > constant > In file included from /usr/src/alsa-driver/include/sound/driver.h:42, > from /usr/src/alsa-driver/acore/hwdep.c:22: > /usr/src/alsa-driver/include/adriver.h: In function > 'snd_pci_orig_save_state': > /usr/src/alsa-driver/include/adriver.h:1172: error: too many arguments to > function 'pci_save_state' > /usr/src/alsa-driver/include/adriver.h: In function > 'snd_pci_orig_restore_state': > /usr/src/alsa-driver/include/adriver.h:1176: error: too many arguments to > function 'pci_restore_state' > make[3]: *** [/usr/src/alsa-driver/acore/hwdep.o] Error 1 > make[2]: *** [/usr/src/alsa-driver/acore] Error 2 > make[1]: *** [_module_/usr/src/alsa-driver] Error 2 > make[1]: Leaving directory `/usr/src/linux-2.6.23-gentoo-r3' > make: *** [compile] Error 2 > > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: snd-hda-intel support for SPDIF-in wiht vt1708 card? 2007-12-19 4:49 ` John Stile 2007-12-19 5:22 ` snd-hda-intel support for SPDIF-inwiht " Darryl House @ 2007-12-19 9:30 ` Takashi Iwai 2007-12-19 16:21 ` John Stile 1 sibling, 1 reply; 8+ messages in thread From: Takashi Iwai @ 2007-12-19 9:30 UTC (permalink / raw) To: John Stile; +Cc: alsa-devel At Tue, 18 Dec 2007 20:49:28 -0800, John Stile wrote: > > On Tue, 2007-12-18 at 16:05 +0100, Takashi Iwai wrote: > > At Tue, 18 Dec 2007 08:28:06 -0800, > > John Stile wrote: > > > > > > On Tue, 2007-12-18 at 14:04 +0100, Takashi Iwai wrote: > > > > At Mon, 17 Dec 2007 10:27:27 -0800, > > > > John Stile wrote: > > > > > > > > > > I am trying to use a Via VT1708 audio card ( uses the snd-hda-intel.ko > > > > > driver) to record from SPDIF-in. > > > > > > > > > > An off-list reply to my posting to alsa-users list suggested that > > > > > snd-hda-intel.ko might not support SPDIF-in with the VT1708 card, which > > > > > brought me here. > > > > > > > > > > Can someone who works on the Intel HDA driver tell me if it supports > > > > > SPDIF-in on the VT1708 audio card? > > > > > > > > It should be, but not tested well, I guess. > > > > > > > > The driver enables the SPDIF-in capability when BIOS sets the pin > > > > information properly. Check /proc/asound/card0/codec#* file whether > > > > you have any (activated) input pin node that supports SPDIF-in. > > > > > > > > > > > > Takashi > > > Thank you for your reply! > > > The output of your command is below. > > > spdif-out=Node 0x25 > > > spdif-in=Node 0x26 > > > Neither labeled inactive, > > > but spdif-in doesn't list a "Connection" line. > > > > Just because it's only for input (thus it has no "source"). > > > > > I have the latest bios: 1.03 (2007/08/23) (a beta bios is available). > > > Do I try the beta bios? > > > > I don't think so. Likely a driver bug. > > How about the patch below (against the latest HG version)? > > > > > > Takashi > > > > diff -r 2d3893cf030c pci/hda/patch_via.c > > --- a/pci/hda/patch_via.c Tue Dec 18 15:42:53 2007 +0100 > > +++ b/pci/hda/patch_via.c Tue Dec 18 17:48:00 2007 +0100 > > @@ -568,25 +568,27 @@ static int via_init(struct hda_codec *co > > if (IS_VT1708_VENDORID(codec->vendor_id)) { > > snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0, > > AC_VERB_SET_PIN_WIDGET_CONTROL, > > - 0x40); > > + PIN_OUT); > > snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0, > > AC_VERB_SET_EAPD_BTLENABLE, 0x02); > > } else if (IS_VT1709_10CH_VENDORID(codec->vendor_id) || > > IS_VT1709_6CH_VENDORID(codec->vendor_id)) { > > snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0, > > AC_VERB_SET_PIN_WIDGET_CONTROL, > > - 0x40); > > + PIN_OUT); > > snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0, > > AC_VERB_SET_EAPD_BTLENABLE, 0x02); > > } else if (IS_VT1708B_8CH_VENDORID(codec->vendor_id) || > > IS_VT1708B_4CH_VENDORID(codec->vendor_id)) { > > snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0, > > AC_VERB_SET_PIN_WIDGET_CONTROL, > > - 0x40); > > + PIN_OUT); > > snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0, > > AC_VERB_SET_EAPD_BTLENABLE, 0x02); > > } > > - } > > + } else /* enable SPDIF-input pin */ > > + snd_hda_codec_write(codec, spec->autocfg.dig_in_pin, 0, > > + AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN); > > > > return 0; > > } > > After making the changes by hand the compile failed. The problem is irrelevant with my patch. The build looks broken on your system anyway. > This is the output: > gcc utils/mod-deps.c -o utils/mod-deps > utils/mod-deps --basedir /usr/src/alsa-driver/alsa-kernel --hiddendir /usr/src/alsa-driver --versiondep /usr/src/alsa-driver/kconfig-vers --makeconf > toplevel.config.in > can't handle word INPUT=y properly, supposing it's OK > can't handle word INPUT=SND_USB_CAIAQ properly, supposing it's OK > utils/mod-deps --basedir /usr/src/alsa-driver/alsa-kernel --hiddendir /usr/src/alsa-driver --versiondep /usr/src/alsa-driver/kconfig-vers --acinclude > acinclude.m4 > can't handle word INPUT=y properly, supposing it's OK > can't handle word INPUT=SND_USB_CAIAQ properly, supposing it's OK > utils/mod-deps --basedir /usr/src/alsa-driver/alsa-kernel --hiddendir /usr/src/alsa-driver --versiondep /usr/src/alsa-driver/kconfig-vers --include > include/config1.h.in > can't handle word INPUT=y properly, supposing it's OK > can't handle word INPUT=SND_USB_CAIAQ properly, supposing it's OK > ./configure --with-debug=full --with-isapnp=yes --with-sequencer=yes > checking for gcc... gcc > checking for C compiler default output file name... a.out > checking whether the C compiler works... yes > checking whether we are cross compiling... no > checking for suffix of executables... > checking for suffix of object files... o > checking whether we are using the GNU C compiler... yes > checking whether gcc accepts -g... yes > checking for gcc option to accept ISO C89... none needed > checking for ranlib... ranlib > checking for a BSD-compatible install... /usr/bin/install -c > checking how to run the C preprocessor... gcc -E > checking for grep that handles long lines and -e... /bin/grep > checking for egrep... /bin/grep -E > checking for ANSI C header files... yes > checking for an ANSI C-conforming const... yes > checking for inline... inline > checking whether time.h and sys/time.h may both be included... yes > checking whether gcc needs -traditional... no > checking for current directory... /usr/src/alsa-driver > checking cross compile... > checking for directory with kernel source... /lib/modules/2.6.23-gentoo-r3/source > checking for directory with kernel build... /lib/modules/2.6.23-gentoo-r3/build > checking for kernel linux/version.h... yes > checking for kernel linux/autoconf.h... yes > checking for kernel version... 2.6.23-gentoo-r3 > checking for GCC version... Kernel compiler: gcc 4.1.2 (Gentoo 4.1.2 p1.0.2) Used compiler: gcc (GCC) 4.1.2 (Gentoo 4.1.2 p1.0.2) > checking for built-in ALSA... no > checking for existing ALSA module... yes > checking for Red Hat kernel... auto > checking for Red Hat kernel... no > checking for SUSE kernel... auto > checking for SUSE kernel... no > checking for CONFIG_EXPERIMENTAL... yes > checking for kernel linux/config.h... no > Creating <linux/config.h>... > checking to modify of kernel linux/kmod.h... no > checking for kernel linux/utsrelease.h... yes > checking for kernel linux/compiler.h... yes > checking for kernel linux/pm.h... yes > checking for kernel linux/spinlock.h... yes > checking for kernel linux/irq.h... yes > checking for kernel linux/threads.h... yes > checking for kernel linux/rwsem.h... yes > checking for kernel linux/gameport.h... yes > checking for kernel media/v4l2-dev.h... yes > checking for kernel linux/devfs_fs_kernel.h... no > Creating a dummy <linux/devfs_fs_kernel.h>... > checking for kernel linux/highmem.h... yes > checking for kernel linux/workqueue.h... yes > checking for kernel linux/dma-mapping.h... yes > checking for kernel asm/hw_irq.h... yes > checking for kernel linux/device.h... yes > checking for kernel linux/platform_device.h... yes > checking for kernel linux/isa.h... yes > checking for kernel linux/jiffies.h... yes > checking for kernel linux/compat.h... yes > checking for kernel linux/log2.h... yes > checking for kernel linux/adb.h... yes > checking for kernel linux/cuda.h... yes > checking for kernel linux/pmu.h... yes > checking for kernel linux/moduleparam.h... yes > checking for kernel linux/syscalls.h... yes > checking for kernel linux/firmware.h... yes > checking for kernel linux/err.h... yes > checking for kernel linux/bitmap.h... yes > checking for kernel linux/mutex.h... yes > checking for kernel linux/latency.h... yes > checking for kernel linux/kthread.h... yes > checking for kernel asm/irq_regs.h... yes > checking for kernel module symbol versions... yes > checking for has ioport support... yes > checking for PCI support in kernel... yes > checking for I2C driver in kernel... module > checking for I2C_POWERMAC in kernel... unknown > checking for firmware loader... module > checking for input subsystem in kernel... yes > checking for directory to store kernel modules... /lib/modules/2.6.23-gentoo-r3/kernel/sound > checking for verbose procfs... on > checking for verbose printk... on > checking for debug level... full > checking for ISA support in kernel... yes > checking for processor type... x86_32 > checking for ISA DMA API... yes > checking for SMP... yes > checking for Video device support in kernel... yes > checking for ISA PnP driver in kernel... yes > checking for PnP driver in kernel... yes > checking for Kernel ISA-PnP support... yes > checking for strlcpy... yes > checking for snprintf... yes > checking for vsnprintf... yes > checking for scnprintf... yes > checking for sscanf... yes > checking for vmalloc_to_page... no The configure doesn't check properly from here on. Check config.log. You must have relevant compile error messages. Takashi ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: snd-hda-intel support for SPDIF-in wiht vt1708 card? 2007-12-19 9:30 ` snd-hda-intel support for SPDIF-in wiht " Takashi Iwai @ 2007-12-19 16:21 ` John Stile 0 siblings, 0 replies; 8+ messages in thread From: John Stile @ 2007-12-19 16:21 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel On Wed, 2007-12-19 at 10:30 +0100, Takashi Iwai wrote: > At Tue, 18 Dec 2007 20:49:28 -0800, > John Stile wrote: > > > > On Tue, 2007-12-18 at 16:05 +0100, Takashi Iwai wrote: > > > At Tue, 18 Dec 2007 08:28:06 -0800, > > > John Stile wrote: > > > > > > > > On Tue, 2007-12-18 at 14:04 +0100, Takashi Iwai wrote: > > > > > At Mon, 17 Dec 2007 10:27:27 -0800, > > > > > John Stile wrote: > > > > > > > > > > > > I am trying to use a Via VT1708 audio card ( uses the snd-hda-intel.ko > > > > > > driver) to record from SPDIF-in. > > > > > > > > > > > > An off-list reply to my posting to alsa-users list suggested that > > > > > > snd-hda-intel.ko might not support SPDIF-in with the VT1708 card, which > > > > > > brought me here. > > > > > > > > > > > > Can someone who works on the Intel HDA driver tell me if it supports > > > > > > SPDIF-in on the VT1708 audio card? > > > > > > > > > > It should be, but not tested well, I guess. > > > > > > > > > > The driver enables the SPDIF-in capability when BIOS sets the pin > > > > > information properly. Check /proc/asound/card0/codec#* file whether > > > > > you have any (activated) input pin node that supports SPDIF-in. > > > > > > > > > > > > > > > Takashi > > > > Thank you for your reply! > > > > The output of your command is below. > > > > spdif-out=Node 0x25 > > > > spdif-in=Node 0x26 > > > > Neither labeled inactive, > > > > but spdif-in doesn't list a "Connection" line. > > > > > > Just because it's only for input (thus it has no "source"). > > > > > > > I have the latest bios: 1.03 (2007/08/23) (a beta bios is available). > > > > Do I try the beta bios? > > > > > > I don't think so. Likely a driver bug. > > > How about the patch below (against the latest HG version)? > > > > > > > > > Takashi > > > > > > diff -r 2d3893cf030c pci/hda/patch_via.c > > > --- a/pci/hda/patch_via.c Tue Dec 18 15:42:53 2007 +0100 > > > +++ b/pci/hda/patch_via.c Tue Dec 18 17:48:00 2007 +0100 > > > @@ -568,25 +568,27 @@ static int via_init(struct hda_codec *co > > > if (IS_VT1708_VENDORID(codec->vendor_id)) { > > > snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0, > > > AC_VERB_SET_PIN_WIDGET_CONTROL, > > > - 0x40); > > > + PIN_OUT); > > > snd_hda_codec_write(codec, VT1708_DIGIN_PIN, 0, > > > AC_VERB_SET_EAPD_BTLENABLE, 0x02); > > > } else if (IS_VT1709_10CH_VENDORID(codec->vendor_id) || > > > IS_VT1709_6CH_VENDORID(codec->vendor_id)) { > > > snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0, > > > AC_VERB_SET_PIN_WIDGET_CONTROL, > > > - 0x40); > > > + PIN_OUT); > > > snd_hda_codec_write(codec, VT1709_DIGIN_PIN, 0, > > > AC_VERB_SET_EAPD_BTLENABLE, 0x02); > > > } else if (IS_VT1708B_8CH_VENDORID(codec->vendor_id) || > > > IS_VT1708B_4CH_VENDORID(codec->vendor_id)) { > > > snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0, > > > AC_VERB_SET_PIN_WIDGET_CONTROL, > > > - 0x40); > > > + PIN_OUT); > > > snd_hda_codec_write(codec, VT1708B_DIGIN_PIN, 0, > > > AC_VERB_SET_EAPD_BTLENABLE, 0x02); > > > } > > > - } > > > + } else /* enable SPDIF-input pin */ > > > + snd_hda_codec_write(codec, spec->autocfg.dig_in_pin, 0, > > > + AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN); > > > > > > return 0; > > > } > > > > After making the changes by hand the compile failed. > > The problem is irrelevant with my patch. > The build looks broken on your system anyway. > > > This is the output: > > gcc utils/mod-deps.c -o utils/mod-deps > > utils/mod-deps --basedir /usr/src/alsa-driver/alsa-kernel --hiddendir /usr/src/alsa-driver --versiondep /usr/src/alsa-driver/kconfig-vers --makeconf > toplevel.config.in > > can't handle word INPUT=y properly, supposing it's OK > > can't handle word INPUT=SND_USB_CAIAQ properly, supposing it's OK > > utils/mod-deps --basedir /usr/src/alsa-driver/alsa-kernel --hiddendir /usr/src/alsa-driver --versiondep /usr/src/alsa-driver/kconfig-vers --acinclude > acinclude.m4 > > can't handle word INPUT=y properly, supposing it's OK > > can't handle word INPUT=SND_USB_CAIAQ properly, supposing it's OK > > utils/mod-deps --basedir /usr/src/alsa-driver/alsa-kernel --hiddendir /usr/src/alsa-driver --versiondep /usr/src/alsa-driver/kconfig-vers --include > include/config1.h.in > > can't handle word INPUT=y properly, supposing it's OK > > can't handle word INPUT=SND_USB_CAIAQ properly, supposing it's OK > > ./configure --with-debug=full --with-isapnp=yes --with-sequencer=yes > > checking for gcc... gcc > > checking for C compiler default output file name... a.out > > checking whether the C compiler works... yes > > checking whether we are cross compiling... no > > checking for suffix of executables... > > checking for suffix of object files... o > > checking whether we are using the GNU C compiler... yes > > checking whether gcc accepts -g... yes > > checking for gcc option to accept ISO C89... none needed > > checking for ranlib... ranlib > > checking for a BSD-compatible install... /usr/bin/install -c > > checking how to run the C preprocessor... gcc -E > > checking for grep that handles long lines and -e... /bin/grep > > checking for egrep... /bin/grep -E > > checking for ANSI C header files... yes > > checking for an ANSI C-conforming const... yes > > checking for inline... inline > > checking whether time.h and sys/time.h may both be included... yes > > checking whether gcc needs -traditional... no > > checking for current directory... /usr/src/alsa-driver > > checking cross compile... > > checking for directory with kernel source... /lib/modules/2.6.23-gentoo-r3/source > > checking for directory with kernel build... /lib/modules/2.6.23-gentoo-r3/build > > checking for kernel linux/version.h... yes > > checking for kernel linux/autoconf.h... yes > > checking for kernel version... 2.6.23-gentoo-r3 > > checking for GCC version... Kernel compiler: gcc 4.1.2 (Gentoo 4.1.2 p1.0.2) Used compiler: gcc (GCC) 4.1.2 (Gentoo 4.1.2 p1.0.2) > > checking for built-in ALSA... no > > checking for existing ALSA module... yes > > checking for Red Hat kernel... auto > > checking for Red Hat kernel... no > > checking for SUSE kernel... auto > > checking for SUSE kernel... no > > checking for CONFIG_EXPERIMENTAL... yes > > checking for kernel linux/config.h... no > > Creating <linux/config.h>... > > checking to modify of kernel linux/kmod.h... no > > checking for kernel linux/utsrelease.h... yes > > checking for kernel linux/compiler.h... yes > > checking for kernel linux/pm.h... yes > > checking for kernel linux/spinlock.h... yes > > checking for kernel linux/irq.h... yes > > checking for kernel linux/threads.h... yes > > checking for kernel linux/rwsem.h... yes > > checking for kernel linux/gameport.h... yes > > checking for kernel media/v4l2-dev.h... yes > > checking for kernel linux/devfs_fs_kernel.h... no > > Creating a dummy <linux/devfs_fs_kernel.h>... > > checking for kernel linux/highmem.h... yes > > checking for kernel linux/workqueue.h... yes > > checking for kernel linux/dma-mapping.h... yes > > checking for kernel asm/hw_irq.h... yes > > checking for kernel linux/device.h... yes > > checking for kernel linux/platform_device.h... yes > > checking for kernel linux/isa.h... yes > > checking for kernel linux/jiffies.h... yes > > checking for kernel linux/compat.h... yes > > checking for kernel linux/log2.h... yes > > checking for kernel linux/adb.h... yes > > checking for kernel linux/cuda.h... yes > > checking for kernel linux/pmu.h... yes > > checking for kernel linux/moduleparam.h... yes > > checking for kernel linux/syscalls.h... yes > > checking for kernel linux/firmware.h... yes > > checking for kernel linux/err.h... yes > > checking for kernel linux/bitmap.h... yes > > checking for kernel linux/mutex.h... yes > > checking for kernel linux/latency.h... yes > > checking for kernel linux/kthread.h... yes > > checking for kernel asm/irq_regs.h... yes > > checking for kernel module symbol versions... yes > > checking for has ioport support... yes > > checking for PCI support in kernel... yes > > checking for I2C driver in kernel... module > > checking for I2C_POWERMAC in kernel... unknown > > checking for firmware loader... module > > checking for input subsystem in kernel... yes > > checking for directory to store kernel modules... /lib/modules/2.6.23-gentoo-r3/kernel/sound > > checking for verbose procfs... on > > checking for verbose printk... on > > checking for debug level... full > > checking for ISA support in kernel... yes > > checking for processor type... x86_32 > > checking for ISA DMA API... yes > > checking for SMP... yes > > checking for Video device support in kernel... yes > > checking for ISA PnP driver in kernel... yes > > checking for PnP driver in kernel... yes > > checking for Kernel ISA-PnP support... yes > > checking for strlcpy... yes > > checking for snprintf... yes > > checking for vsnprintf... yes > > checking for scnprintf... yes > > checking for sscanf... yes > > checking for vmalloc_to_page... no > > The configure doesn't check properly from here on. > Check config.log. You must have relevant compile error messages. I kept good notes of my procedure. Does any of the stuff below look wrong? # # Remove all installed alsa stuff # emerge --unmerge alsa-headers emerge --unmerge alsa-lib emerge --unmerge alsa-utils emerge --unmerge alsa-tools emerge --unmerge alsa-firmware emerge --unmerge alsa-oss emerge --unmerge alsa-plugins emerge --unmmerge media-sound/alsamixergui eix -I alsa # <empty> # # Remove alsa from init system # rc-update delete alsasound rm -rf /etc/init.d/alsasound # # Rebuild kernel with only minimal alsa support # Device Drivers ---> Sound ---> <*> Sound card support Advanced Linux Sound Architecture ---> <M> Advanced Linux Sound Architecture <M> Sequencer support <M> OSS Mixer API <M> OSS PCM (digital audio) API [*] OSS PCM (digital audio) API - Include plugin system [*] OSS Sequencer API <M> RTC Timer support [*] Use RTC as default sequencer timer [*] Support old ALSA API PCI devices ---> <none selected> # # Install Hg alsa stuff here # cd /usr/src # # Download alsa-lib and alsa-utils from http://www.alsa-project.org/ # wget ftp://ftp.alsa-project.org/pub/lib/alsa-lib-1.0.15.tar.bz2 wget ftp://ftp.alsa-project.org/pub/utils/alsa-utils-1.0.15.tar.bz2 tar xvf alsa-lib* tar xvf alsa-utils* # # Install mercurial # emerge --update --newuse --deep mercurial # # Checkout mercruial alsa repo # cd /usr/src hg clone http://hg-mirror.alsa-project.org/alsa-driver alsa-driver pushd alsa-driver hg clone http://hg-mirror.alsa-project.org/alsa-kernel alsa-kernel # # Patch # # Apply Takashi's changes by hand (patch -p1 didn't work). # # # Build it up # cd /usr/src/alsa-driver ./hgcompile <compile failed> ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2007-12-19 16:22 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2007-12-17 18:27 snd-hda-intel support for SPDIF-in wiht vt1708 card? John Stile 2007-12-18 13:04 ` Takashi Iwai 2007-12-18 16:28 ` John Stile 2007-12-18 15:05 ` Takashi Iwai 2007-12-19 4:49 ` John Stile 2007-12-19 5:22 ` snd-hda-intel support for SPDIF-inwiht " Darryl House 2007-12-19 9:30 ` snd-hda-intel support for SPDIF-in wiht " Takashi Iwai 2007-12-19 16:21 ` John Stile
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox