* Request for help with snd-hda-intel ICH6 CMI9880
@ 2006-02-02 20:07 Piotr A. Frątczak
2006-02-02 20:40 ` Lee Revell
0 siblings, 1 reply; 3+ messages in thread
From: Piotr A. Frątczak @ 2006-02-02 20:07 UTC (permalink / raw)
To: alsa-devel
I have problem with below mentioned motherboard
http://www.gigabyte.pl/MotherBoard/Products/Products_Spec_GA-8I915P%
20Duo%20Pro.htm
sound input. I'm using it since the times of snd-azx module, but until
now I never had the need to use any external sound input, thus I wasn;t
aware I have a problem. I am unable to hear anything neither by
connecting the microphone nor by connecting my new tv-card to the
'cdrom-in' connector on the motherboard. It works on W2K or with another
card (snd-cmipci) - I usually use Gentoo, but I checked it on Fedora
Core 4 and OpenSuse 10.0 - same effect.
Please give me a hint how to fix this
best regards
PiotrAF
uname -r
2.6.15-gentoo-r1
cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xec200000 irq 16
# lspci -nv
00:00.0 0600: 8086:2580 (rev 04)
Subsystem: 1458:2580
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:01.0 0604: 8086:2581 (rev 04)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable-
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [140] Unknown (5)
00:1b.0 0403: 8086:2668 (rev 03)
Subsystem: 1458:a005
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at ec200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [130] Unknown (5)
00:1c.0 0604: 8086:2660 (rev 03)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.2 0604: 8086:2664 (rev 03)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: ec100000-ec1fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.3 0604: 8086:2666 (rev 03)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: ec000000-ec0fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1d.0 0c03: 8086:2658 (rev 03)
Subsystem: 1458:2658
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at b000 [size=32]
00:1d.1 0c03: 8086:2659 (rev 03)
Subsystem: 1458:2659
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at b400 [size=32]
00:1d.2 0c03: 8086:265a (rev 03)
Subsystem: 1458:265a
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at b800 [size=32]
00:1d.3 0c03: 8086:265b (rev 03)
Subsystem: 1458:265a
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at bc00 [size=32]
00:1d.7 0c03: 8086:265c (rev 03) (prog-if 20)
Subsystem: 1458:5006
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at ec204000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
00:1e.0 0604: 8086:244e (rev d3) (prog-if 01)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: ea000000-ebffffff
Capabilities: [50] #0d [0000]
00:1f.0 0601: 8086:2640 (rev 03)
Flags: bus master, medium devsel, latency 0
00:1f.1 0101: 8086:266f (rev 03) (prog-if 8a)
Subsystem: 1458:266f
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at f000 [size=16]
00:1f.2 0106: 8086:2652 (rev 03) (prog-if 01)
Subsystem: 1458:b005
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
I/O ports at d000 [size=8]
I/O ports at d400 [size=4]
I/O ports at d800 [size=8]
I/O ports at dc00 [size=4]
I/O ports at e000 [size=16]
Memory at ec207000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
00:1f.3 0c05: 8086:266a (rev 03)
Subsystem: 1458:266a
Flags: medium devsel, IRQ 11
I/O ports at 0500 [size=32]
01:00.0 0300: 1002:5b60
Subsystem: 1458:2102
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at e0000000 (32-bit, prefetchable) [size=128M]
I/O ports at a000 [size=256]
Memory at e9000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e8000000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
Capabilities: [100] Advanced Error Reporting
01:00.1 0380: 1002:5b70
Subsystem: 1458:2103
Flags: bus master, fast devsel, latency 0
Memory at e9010000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint IRQ 0
03:00.0 0200: 14e4:1677 (rev 01)
Subsystem: 1458:e000
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at ec100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Capabilities: [d0] Express Endpoint IRQ 0
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
04:00.0 0200: 14e4:1677 (rev 01)
Subsystem: 1458:e000
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at ec000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Capabilities: [d0] Express Endpoint IRQ 0
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
05:00.0 0400: 14f1:8800 (rev 05)
Subsystem: 107d:6611
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at ea000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
05:07.0 0c00: 104c:8024 (prog-if 10)
Subsystem: 1458:1000
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at eb004000 (32-bit, non-prefetchable) [size=2K]
Memory at eb000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Request for help with snd-hda-intel ICH6 CMI9880
2006-02-02 20:07 Request for help with snd-hda-intel ICH6 CMI9880 Piotr A. Frątczak
@ 2006-02-02 20:40 ` Lee Revell
2006-02-10 15:26 ` Piotr A. Frątczak
0 siblings, 1 reply; 3+ messages in thread
From: Lee Revell @ 2006-02-02 20:40 UTC (permalink / raw)
To: Piotr A. Frątczak; +Cc: alsa-devel
On Thu, 2006-02-02 at 21:07 +0100, Piotr A. Frątczak wrote:
> I have problem with below mentioned motherboard
> http://www.gigabyte.pl/MotherBoard/Products/Products_Spec_GA-8I915P%
> 20Duo%20Pro.htm
>
> sound input. I'm using it since the times of snd-azx module, but until
> now I never had the need to use any external sound input, thus I wasn;t
> aware I have a problem. I am unable to hear anything neither by
> connecting the microphone nor by connecting my new tv-card to the
> 'cdrom-in' connector on the motherboard
Try all the different "model=" options for hda-intel described in
ALSA-Configuration.txt and report back here if any of them help.
Lee
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Request for help with snd-hda-intel ICH6 CMI9880
2006-02-02 20:40 ` Lee Revell
@ 2006-02-10 15:26 ` Piotr A. Frątczak
0 siblings, 0 replies; 3+ messages in thread
From: Piotr A. Frątczak @ 2006-02-10 15:26 UTC (permalink / raw)
To: Lee Revell; +Cc: alsa-devel
Dnia 02-02-2006, czw o godzinie 15:40 -0500, Lee Revell napisał(a):
> Try all the different "model=" options for hda-intel described in
> ALSA-Configuration.txt and report back here if any of them help.
I should have mentioned that previously, but I did try all the possible
model= previously and even the ones not fot this chip. Nothing changes.
What I did obtain by checking all the possible mixer setting is that I
am able to record the sound (in my case it's the TV card's sound) using
the gnome-mixer(?). I have to:
1) change to "1: C-MEDIA CMI9880 (OSS MIXER)
2) set the In-Gain to 100
3) go back to "0: HDA Intel (ALSA MIXER)
4) in 'option tab' set the input0 source to 'rear mic'
5) in the 'recording tab' set the capture0: the 'speaker icon' unmute,
and mute the 'mic icon'(capture switch?) - if I want mic then this
switch should be unmuted. The input source is connected to the
motherboard cd-in.
That way I am able to record the sound with the gnome's recording, but I
don't hear it until I play the recorded part. AFAIK it's 'model='
independent, but didn't check it - the current is:
$ grep model /etc/modprobe.conf
options snd-hda-intel index=0 model=min_fp position_fix=3
I know that my description is quite unprofessional - please forgive me
and guide me how to list these settings for you.
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid\x103432&bid#0486&dat\x121642
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-02-10 15:26 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-02-02 20:07 Request for help with snd-hda-intel ICH6 CMI9880 Piotr A. Frątczak
2006-02-02 20:40 ` Lee Revell
2006-02-10 15:26 ` Piotr A. Frątczak
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox