* Prolem with ALC260 soundcard
@ 2006-10-04 10:02 Lubomir Schmidt
2006-10-04 13:32 ` Andrea Gozzi
0 siblings, 1 reply; 8+ messages in thread
From: Lubomir Schmidt @ 2006-10-04 10:02 UTC (permalink / raw)
To: Alsa-devel
Hello, i have an acer c204 Notebook with an ALC260 chip inside. Since one month i have sound on it, because of the ALC883 patch for acer notebooks. When i set "options snd-hda-intel model=acer" in the modprobe.conf, then i have sound over my headphones, but no sound is comming out of the speaker. I olso saw, that when i put my headphones inside the mic, then i olso have sound. That sound have not as good quality as that from the headphones jack and its louder.
Can someone tell me what i could do to get sound out of my speaker?
At the moment i use the 2.6.17 kernel with alsa 1.0.13
Thanks
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Prolem with ALC260 soundcard
2006-10-04 10:02 Prolem with ALC260 soundcard Lubomir Schmidt
@ 2006-10-04 13:32 ` Andrea Gozzi
2006-10-04 13:56 ` Lee Revell
0 siblings, 1 reply; 8+ messages in thread
From: Andrea Gozzi @ 2006-10-04 13:32 UTC (permalink / raw)
To: Lubomir Schmidt; +Cc: alsa-devel
[-- Attachment #1.1.1: Type: text/plain, Size: 1697 bytes --]
Hey,
I have experienced the same troubles since I bought my Packard Bell
V7900 laptop.
Not much developement is going for ALC260 and I was able to hear clear
sound from headphones (with "Line-In" plug enabled as output source)
only by setting the option <model=test> and playing with the switches.
It's quite annoying but they fixed this problem for other realtek
chipsets and I'm confident they will do for this one too.
Andrea
On Wed, 2006-10-04 at 12:02 +0200, Lubomir Schmidt wrote:
> Hello, i have an acer c204 Notebook with an ALC260 chip inside. Since
> one month i have sound on it, because of the ALC883 patch for acer
> notebooks. When i set "options snd-hda-intel model=acer" in the
> modprobe.conf, then i have sound over my headphones, but no sound is
> comming out of the speaker. I olso saw, that when i put my headphones
> inside the mic, then i olso have sound. That sound have not as good
> quality as that from the headphones jack and its louder. Can someone
> tell me what i could do to get sound out of my speaker?
>
> At the moment i use the 2.6.17 kernel with alsa 1.0.13
>
> Thanks
>
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys -- and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
[-- Attachment #1.1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 196 bytes --]
[-- Attachment #1.2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 3435 bytes --]
[-- Attachment #2: Type: text/plain, Size: 348 bytes --]
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
[-- Attachment #3: Type: text/plain, Size: 161 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Prolem with ALC260 soundcard
2006-10-04 13:32 ` Andrea Gozzi
@ 2006-10-04 13:56 ` Lee Revell
0 siblings, 0 replies; 8+ messages in thread
From: Lee Revell @ 2006-10-04 13:56 UTC (permalink / raw)
To: andrea.gozzi; +Cc: alsa-devel
On Wed, 2006-10-04 at 15:32 +0200, Andrea Gozzi wrote:
> Hey,
>
> I have experienced the same troubles since I bought my Packard Bell
> V7900 laptop.
> Not much developement is going for ALC260 and I was able to hear clear
> sound from headphones (with "Line-In" plug enabled as output source)
> only by setting the option <model=test> and playing with the switches.
>
> It's quite annoying but they fixed this problem for other realtek
> chipsets and I'm confident they will do for this one too.
Did you report what controls you needed to enable to get sound in test
mode?
Lee
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <mailman.50380.1159956166.16222.alsa-devel@lists.sourceforge.net>]
* Re: Prolem with ALC260 soundcard
[not found] <mailman.50380.1159956166.16222.alsa-devel@lists.sourceforge.net>
@ 2006-10-05 1:31 ` Jonathan Woithe
0 siblings, 0 replies; 8+ messages in thread
From: Jonathan Woithe @ 2006-10-05 1:31 UTC (permalink / raw)
To: alsa-devel; +Cc: Jonathan Woithe
> Hello, i have an acer c204 Notebook with an ALC260 chip inside. Since one
> month i have sound on it, because of the ALC883 patch for acer notebooks.
Hmm, that's marginally odd. I wouldn't expect the ALC883 patch to have any
effect on your laptop if you truly have an ALC260. The ALC260 hasn't had
any major changes for a while so it's a little strange that things have
changed recently.
Could you send me the output of
lspci -v
as well as the result of the command
cat /proc/asound/card0/codec#0
> When i set "options snd-hda-intel model=acer" in the modprobe.conf, then i
> have sound over my headphones, but no sound is comming out of the speaker.
If this Acer is anything like others and it truly does use the ALC260 (eg:
Travelmates) it could be that we need to activate more than just GPIO0 on
your particular laptop. Currently the ALC260 Acer model turns GPIO0 on
which on the Travelmates means both the headphone jack and the internal
speaker can work. Perhaps the c204 uses GPIO0 for the headphone jack (since
you report that working) and GPIO1 (for instance) for the internal speaker.
However before proceeding we have to confirm exactly which chip is in your
notebook, as described previously.
> I olso saw, that when i put my headphones inside the mic, then i olso have
> sound. That sound have not as good quality as that from the headphones
> jack and its louder.
Now *that's* odd. This seems to suggest that the c204 may be wired
totally differently to the Travelmate from the point of view of which
pins on the ALC260 chip go where.
Could you give me a complete list of the audio jacks provided on your
laptop. I guess there's at least a "headphone" jack and one labelled "mic".
If there are any others, what are they?
> Can someone tell me what i could do to get sound out of my speaker?
Are you comfortable/familiar with configuring and compiling ALSA? We
are possibly going to have to get you to run some tests with the "test"
ALC260 model but that will require you recompile ALSA.
Regards
jonathan
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <mailman.51025.1159971494.16222.alsa-devel@lists.sourceforge.net>]
* Re: Prolem with ALC260 soundcard
[not found] <mailman.51025.1159971494.16222.alsa-devel@lists.sourceforge.net>
@ 2006-10-05 2:02 ` Jonathan Woithe
0 siblings, 0 replies; 8+ messages in thread
From: Jonathan Woithe @ 2006-10-05 2:02 UTC (permalink / raw)
To: alsa-devel; +Cc: rlrevell, Jonathan Woithe
> I have experienced the same troubles since I bought my Packard Bell
> V7900 laptop.
> Not much developement is going for ALC260 ...
Well, that's not entirely accurate. It is fair to say that development
occurs on an as-needs basis and as time allows. No one's paying me to work
on ALSA so there's a day job and other issues to work around. :-)
> ... but they fixed this problem for other realtek
> chipsets and I'm confident they will do for this one too.
We'll get there.
Lee wrote:
> Did you report what controls you needed to enable to get sound in test
> mode?
Initial details were posted to the list on 25 Sept 2006 by Andrea (subject
was "Re: : [Alsa-devel] ALC260 (Re: ALSA 1.0.13rc2 release)").
Unfortunately I've been snowed under with work, family and other issues for
the past 3 or so weeks and have been able to get to this plus a number of
other things on my ALC260 "todo" list. I'm hoping to get to them soon but
it depends on how a number of things pan out over the next couple of weeks.
For reference this is what was communicated. When running with the test
mode:
"The only way I could get sound to work (at a normal volume) was with
headphones (connected to the line in plug) and setting "LINE1 pin mode"
to "Line out". Only that option is needed to be set, any other value in
the fields doesn't change anything and neither do switches."
This tends to suggest that on this laptop the "Line in" plug on the laptop
is connected to the "LINE1" node on the ALC260. As to what other plugs are
on this laptop and how they might be connected to ALC260 pin complexes, I
haven't had a chance to follow up yet. It's odd that it was not possible to
get sound out of other plugs but that could be the result of the
interdependency of many of the controls in the test model - it's easy to
miss the particular combination which makes a plug start working.
Regards
jonathan
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Prolem with ALC260 soundcard
@ 2006-10-05 13:54 Lubomir Schmidt
0 siblings, 0 replies; 8+ messages in thread
From: Lubomir Schmidt @ 2006-10-05 13:54 UTC (permalink / raw)
To: jwoithe, alsa-devel
Here is the lspci -vv (shows more then -v ;-) )
http://pastebin.ca/191868
and the cat /proc/asound/card0/codec#0
http://pastebin.ca/191871
I can rememebr that i have read in the alsa bugtrack that i am not the only one with an ALC260 chip who helped that alc883 patch. I olso remember that i have sound since the 1.0.13rc2 or rc3 release (i have installed extra the suse 10.2 alpha 4 to try the driver). In release 1.0.13rc1 came that ALC883 patch.
I do not know how i could add compile-options when i compile something. I use gentoo and work with portage. Could you put the different things into model=acer in the new RC releases? The Acer have an headphone and an mic jack. There is no otehr jack.
I have tested again the mic jack. The sound that comes out there is louder and have no bass. I think that is the sound that had to come out of the speaker. I remember the sound that comes out of the speaker when i had windows installed (i have no windows on it now). It had olso no bass.
The mic that is been build into the notebook is working. I can hear that, when i turn in alsamixer the mic to maximum and unmute it. When i go with my finger over the mic, i can hear that through the headphone and the mic jack. That mic only work when i set "mic jack" = "Mic 50pc" or "Mic 80pc".
Hey, in the time i write the text here i found out why i had sound out of the mic jack. The "Line Jac" was on "Line out". When i turn that into "Line in,Mic 50pc or Mic 80pc" i can not hear anything more coming out of the mic jack. When it is set to line out or headphone i can hear the music that i have started with amaroK(internet radio stream).
Thank you for the support
------old mail--------
> Hello, i have an acer c204 Notebook with an ALC260 chip inside. Since one
> month i have sound on it, because of the ALC883 patch for acer notebooks.
Hmm, that's marginally odd. I wouldn't expect the ALC883 patch to have any
effect on your laptop if you truly have an ALC260. The ALC260 hasn't had
any major changes for a while so it's a little strange that things have
changed recently.
Could you send me the output of
lspci -v
as well as the result of the command
cat /proc/asound/card0/codec#0
> When i set "options snd-hda-intel model=acer" in the modprobe.conf, then i
> have sound over my headphones, but no sound is comming out of the speaker.
If this Acer is anything like others and it truly does use the ALC260 (eg:
Travelmates) it could be that we need to activate more than just GPIO0 on
your particular laptop. Currently the ALC260 Acer model turns GPIO0 on
which on the Travelmates means both the headphone jack and the internal
speaker can work. Perhaps the c204 uses GPIO0 for the headphone jack (since
you report that working) and GPIO1 (for instance) for the internal speaker.
However before proceeding we have to confirm exactly which chip is in your
notebook, as described previously.
> I olso saw, that when i put my headphones inside the mic, then i olso have
> sound. That sound have not as good quality as that from the headphones
> jack and its louder.
Now *that's* odd. This seems to suggest that the c204 may be wired
totally differently to the Travelmate from the point of view of which
pins on the ALC260 chip go where.
Could you give me a complete list of the audio jacks provided on your
laptop. I guess there's at least a "headphone" jack and one labelled "mic".
If there are any others, what are they?
> Can someone tell me what i could do to get sound out of my speaker?
Are you comfortable/familiar with configuring and compiling ALSA? We
are possibly going to have to get you to run some tests with the "test"
ALC260 model but that will require you recompile ALSA.
Regards
jonathan
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <mailman.54439.1160057473.16222.alsa-devel@lists.sourceforge.net>]
* Re: Prolem with ALC260 soundcard
[not found] <mailman.54439.1160057473.16222.alsa-devel@lists.sourceforge.net>
@ 2006-10-05 23:53 ` Jonathan Woithe
0 siblings, 0 replies; 8+ messages in thread
From: Jonathan Woithe @ 2006-10-05 23:53 UTC (permalink / raw)
To: alsa-devel; +Cc: Jonathan Woithe
> and the cat /proc/asound/card0/codec#0
> :
> # cat /proc/asound/card0/codec#0
> Codec: Realtek ALC260
> Address: 0
> Vendor Id: 0x10ec0260
> Subsystem Id: 0x1025110d
> Revision Id: 0x100400
Thanks for that. This suggests a PCI subvendor of 0x1025 and a pci_subdevice
ID of 0x110d I think. If we need to add another model ID to patch_realtek.c
these are the values we would use. Note that the current "acer" ALC260 model
has a pci_subdevice of 0x008f.
> I can rememebr that i have read in the alsa bugtrack that i am not the
> only one with an ALC260 chip who helped that alc883 patch. I olso remember
> that i have sound since the 1.0.13rc2 or rc3 release (i have installed
> extra the suse 10.2 alpha 4 to try the driver). In release 1.0.13rc1 came
> that ALC883 patch.
I can't comment since I missed that discussion. I find it most odd that
patches to fix the ALC883 would affect people using ALC260. While the two
chips share code, their setup is quite separate. Anyway, if it's changed
things so be it - it's a good thing. <shrug>
> I do not know how i could add compile-options when i compile something. I
> use gentoo and work with portage. Could you put the different things into
> model=acer in the new RC releases?
This would delay the investigation of the problem. If it comes to this
I'll try to work out a way around this.
> The Acer have an headphone and an mic jack. There is no otehr jack.
Ok, thanks for the confirmation.
> I have tested again the mic jack. The sound that comes out there is louder
> and have no bass.
The lack of bass could be due to how the ALC260 is electronically connected
to the chip. Depending on the blocking capacitors in place and the nature
of what you're driving you could experience a lack of bass from this jack.
> I remember the sound that comes out of the speaker when i had windows
> installed (i have no windows on it now). It had olso no bass.
That's probably more because the speaker is so tiny that it can't physically
reproduce anything below 400 Hz (if that).
> The mic that is been build into the notebook is working. I can hear that,
> when i turn in alsamixer the mic to maximum and unmute it. When i go with
> my finger over the mic, i can hear that through the headphone and the mic
> jack. That mic only work when i set "mic jack" = "Mic 50pc" or "Mic 80pc".
That makes sense. These two settings activate bias voltages which are needed
by certain types of microphone elements. The internal mic is almost always
one which needs at least some bias voltage so that's why it only works
when one of these two settings are selected.
> Hey, in the time i write the text here i found out why i had sound out of
> the mic jack. The "Line Jac" was on "Line out". When i turn that into
> "Line in,Mic 50pc or Mic 80pc" i can not hear anything more coming out of
> the mic jack. When it is set to line out or headphone i can hear the music
> that i have started with amaroK(internet radio stream).
Excellent. It therefore seems that your Acer is more or less working with
the exception of the internal speaker:
- the "mic" control deals with the internal microphone.
- the "Line in" control relates to the mic jack on the side of the laptop.
- sound is heard from the headphone jack.
- the internal speaker currently does not work.
Is this a fair summary of your situation?
Are you able to edit the ALSA driver source code on your system? If not
email me privately and we'll work something out for you. If so, go into
alsa-kernel/pci/hda/patch_realtek.c file and find the definition of
alc260_acer_init_verbs. Ignoring comments the upper 3 lines are
{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
This is just a wild guess, but perhaps change these to instead read
{0x01, AC_VERB_SET_GPIO_MASK, 0x0f},
{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f},
{0x01, AC_VERB_SET_GPIO_DATA, 0x0f},
Recompile, reinstall and test again with the model=acer setting. If this
makes sound come from your internal speaker my suspicion about needing an
additional GPIO line enabled on your laptop is correct.
Regards
jonathan
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Prolem with ALC260 soundcard
@ 2006-10-10 0:40 Jonathan Woithe
0 siblings, 0 replies; 8+ messages in thread
From: Jonathan Woithe @ 2006-10-10 0:40 UTC (permalink / raw)
To: alsa-devel; +Cc: Jonathan Woithe
Some time ago I wrote:
> > and the cat /proc/asound/card0/codec#0
> > :
> > # cat /proc/asound/card0/codec#0
> > Codec: Realtek ALC260
> > Address: 0
> > Vendor Id: 0x10ec0260
> > Subsystem Id: 0x1025110d
> > Revision Id: 0x100400
>
> Thanks for that. This suggests a PCI subvendor of 0x1025 and a pci_subdevice
> ID of 0x110d I think. If we need to add another model ID to patch_realtek.c
> these are the values we would use. Note that the current "acer" ALC260 model
> has a pci_subdevice of 0x008f.
Minor correction. The pci_subdevice ID comes from the PCI subsystem, not
the codec subsystem ID. Thus we see from "lspci -vv":
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
High Definition Audio Controller (rev 04)
Subsystem: Acer Incorporated [ALI] Unknown device 007b
So if we do need to identify this particular variant (Acer c204) the
appropriate pci_subdevice ID should be 0x007b I think, rather than 0x110d.
Regards
jonathan
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2006-10-10 0:40 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-10-04 10:02 Prolem with ALC260 soundcard Lubomir Schmidt
2006-10-04 13:32 ` Andrea Gozzi
2006-10-04 13:56 ` Lee Revell
[not found] <mailman.50380.1159956166.16222.alsa-devel@lists.sourceforge.net>
2006-10-05 1:31 ` Jonathan Woithe
[not found] <mailman.51025.1159971494.16222.alsa-devel@lists.sourceforge.net>
2006-10-05 2:02 ` Jonathan Woithe
-- strict thread matches above, loose matches on Subject: below --
2006-10-05 13:54 Lubomir Schmidt
[not found] <mailman.54439.1160057473.16222.alsa-devel@lists.sourceforge.net>
2006-10-05 23:53 ` Jonathan Woithe
2006-10-10 0:40 Jonathan Woithe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox