From: Tobin Davis <tdavis@dsl-only.net>
To: Matt Porter <mporter@embeddedalley.com>
Cc: tiwai@suse.de, alsa-devel@alsa-project.org
Subject: Re: [PATCH] hda: add sigmatel dig mic support and refactor 9227
Date: Wed, 25 Oct 2006 13:53:56 -0700 [thread overview]
Message-ID: <1161809636.18211.65.camel@razman> (raw)
In-Reply-To: <20061025202110.GA351@matthew-porters-computer.local>
Couple of things, which version is this against? I tried patching
against the tip and all areas were rejected.
Also, the original 9227 and 927x code was written specifically for Intel
D965 board support. The information I had was from the Stac 9227
developers reference and several systems I was working with at the time
(I was a contractor at Intel). From what I can tell, your patch removes
the 3stack configuration and replaces it with the ref config, which
could break the 3-stack systems. Has this patch been tested on these
systems?
Tobin Davis
On Wed, 2006-10-25 at 16:21 -0400, Matt Porter wrote:
> Adds support for digital microphone pin widgets on SigmaTel codecs.
> Also refactor 9227 support out of the 927x support since the 9227
> codecs have some differing pin widgets.
>
> Signed-off-by: Matt Porter <mporter@embeddedalley.com>
>
> diff -r c4d2375b7e9e pci/hda/patch_sigmatel.c
> --- a/pci/hda/patch_sigmatel.c Tue Oct 24 19:49:39 2006 +0200
> +++ b/pci/hda/patch_sigmatel.c Wed Oct 25 13:04:04 2006 -0700
> @@ -41,10 +41,8 @@
> #define STAC_D945GTP3 1
> #define STAC_D945GTP5 2
> #define STAC_MACMINI 3
> -#define STAC_922X_MODELS 4 /* number of 922x models */
> #define STAC_D965_3ST 4
> #define STAC_D965_5ST 5
> -#define STAC_927X_MODELS 6 /* number of 922x models */
>
> struct sigmatel_spec {
> struct snd_kcontrol_new *mixers[4];
> @@ -67,6 +65,9 @@ struct sigmatel_spec {
> unsigned int num_adcs;
> hda_nid_t *mux_nids;
> unsigned int num_muxes;
> + hda_nid_t *dmic_nids;
> + unsigned int num_dmics;
> + hda_nid_t dmux_nid;
> hda_nid_t dig_in_nid;
>
> /* pin widgets */
> @@ -80,6 +81,8 @@ struct sigmatel_spec {
> struct snd_kcontrol_new *mixer;
>
> /* capture source */
> + struct hda_input_mux *dinput_mux;
> + unsigned int cur_dmux;
> struct hda_input_mux *input_mux;
> unsigned int cur_mux[3];
>
> @@ -92,6 +95,7 @@ struct sigmatel_spec {
> struct auto_pin_cfg autocfg;
> unsigned int num_kctl_alloc, num_kctl_used;
> struct snd_kcontrol_new *kctl_alloc;
> + struct hda_input_mux private_dimux;
> struct hda_input_mux private_imux;
> };
>
> @@ -123,12 +127,32 @@ static hda_nid_t stac927x_mux_nids[3] =
> 0x15, 0x16, 0x17
> };
>
> +static hda_nid_t stac927x_dmic_nids[3] = {
> + 0x13, 0x14, 0
> +};
> +
> +static hda_nid_t stac9227_adc_nids[3] = {
> + 0x07, 0x08, 0x09
> +};
> +
> +static hda_nid_t stac9227_mux_nids[3] = {
> + 0x15, 0x16, 0x17
> +};
> +
> +static hda_nid_t stac9227_dmic_nids[3] = {
> + 0x13, 0x14, 0
> +};
> +
> static hda_nid_t stac9205_adc_nids[2] = {
> 0x12, 0x13
> };
>
> static hda_nid_t stac9205_mux_nids[2] = {
> 0x19, 0x1a
> +};
> +
> +static hda_nid_t stac9205_dmic_nids[3] = {
> + 0x17, 0x18, 0
> };
>
> static hda_nid_t stac9200_pin_nids[8] = {
> @@ -145,6 +169,13 @@ static hda_nid_t stac927x_pin_nids[14] =
> 0x0a, 0x0b, 0x0c, 0x0d, 0x0e,
> 0x0f, 0x10, 0x11, 0x12, 0x13,
> 0x14, 0x21, 0x22, 0x23,
> +};
> +
> +static hda_nid_t stac9227_pin_nids[16] = {
> + 0x0a, 0x0b, 0x0c, 0x0d, 0x0e,
> + 0x0f, 0x10, 0x11, 0x12, 0x13,
> + 0x14, 0x1e, 0x20, 0x21, 0x22,
> + 0x23,
> };
>
> static hda_nid_t stac9205_pin_nids[12] = {
> @@ -153,6 +184,31 @@ static hda_nid_t stac9205_pin_nids[12] =
> 0x21, 0x22,
>
> };
> +
> +static int stac92xx_dmux_enum_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
> +{
> + struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
> + struct sigmatel_spec *spec = codec->spec;
> + return snd_hda_input_mux_info(spec->dinput_mux, uinfo);
> +}
> +
> +static int stac92xx_dmux_enum_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
> +{
> + struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
> + struct sigmatel_spec *spec = codec->spec;
> +
> + ucontrol->value.enumerated.item[0] = spec->cur_dmux;
> + return 0;
> +}
> +
> +static int stac92xx_dmux_enum_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
> +{
> + struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
> + struct sigmatel_spec *spec = codec->spec;
> +
> + return snd_hda_input_mux_put(codec, spec->dinput_mux, ucontrol,
> + spec->dmux_nid, &spec->cur_dmux);
> +}
>
> static int stac92xx_mux_enum_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
> {
> @@ -204,6 +260,12 @@ static struct hda_verb d965_core_init[]
> };
>
> static struct hda_verb stac927x_core_init[] = {
> + /* set master volume and direct control */
> + { 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
> + {}
> +};
> +
> +static struct hda_verb stac9227_core_init[] = {
> /* set master volume and direct control */
> { 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
> {}
> @@ -252,6 +314,14 @@ static struct snd_kcontrol_new stac9227_
> static struct snd_kcontrol_new stac9227_mixer[] = {
> {
> .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> + .name = "Digital Input Source",
> + .count = 1,
> + .info = stac92xx_dmux_enum_info,
> + .get = stac92xx_dmux_enum_get,
> + .put = stac92xx_dmux_enum_put,
> + },
> + {
> + .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> .name = "Input Source",
> .count = 1,
> .info = stac92xx_mux_enum_info,
> @@ -259,11 +329,20 @@ static struct snd_kcontrol_new stac9227_
> .put = stac92xx_mux_enum_put,
> },
> HDA_CODEC_VOLUME("Capture Volume", 0x15, 0x0, HDA_OUTPUT),
> + HDA_CODEC_VOLUME("InVol Capture Volume", 0x18, 0x0, HDA_INPUT),
> HDA_CODEC_MUTE("Capture Switch", 0x1b, 0x0, HDA_OUTPUT),
> { } /* end */
> };
>
> static snd_kcontrol_new_t stac927x_mixer[] = {
> + {
> + .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> + .name = "Digital Input Source",
> + .count = 1,
> + .info = stac92xx_dmux_enum_info,
> + .get = stac92xx_dmux_enum_get,
> + .put = stac92xx_dmux_enum_put,
> + },
> {
> .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> .name = "Input Source",
> @@ -281,6 +360,14 @@ static snd_kcontrol_new_t stac9205_mixer
> static snd_kcontrol_new_t stac9205_mixer[] = {
> {
> .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> + .name = "Digital Input Source",
> + .count = 1,
> + .info = stac92xx_dmux_enum_info,
> + .get = stac92xx_dmux_enum_get,
> + .put = stac92xx_dmux_enum_put,
> + },
> + {
> + .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> .name = "Input Source",
> .count = 1,
> .info = stac92xx_mux_enum_info,
> @@ -357,7 +444,7 @@ static unsigned int d945gtp5_pin_configs
> 0x02a19320, 0x40000100,
> };
>
> -static unsigned int *stac922x_brd_tbl[STAC_922X_MODELS] = {
> +static unsigned int *stac922x_brd_tbl[] = {
> [STAC_REF] = ref922x_pin_configs,
> [STAC_D945GTP3] = d945gtp3_pin_configs,
> [STAC_D945GTP5] = d945gtp5_pin_configs,
> @@ -458,31 +545,38 @@ static unsigned int ref927x_pin_configs[
> static unsigned int ref927x_pin_configs[14] = {
> 0x02214020, 0x02a19080, 0x0181304e, 0x01014010,
> 0x01a19040, 0x01011012, 0x01016011, 0x0101201f,
> - 0x183301f0, 0x18a001f0, 0x18a001f0, 0x01442070,
> + 0x183301f0, 0x90a000f0, 0x90a000f0, 0x01442070,
> 0x01c42190, 0x40000100,
> };
>
> -static unsigned int d965_3st_pin_configs[14] = {
> +static unsigned int ref9227_pin_configs[16] = {
> + 0x02214020, 0x02a19080, 0x0181304e, 0x01014010,
> + 0x01a19040, 0x01011012, 0x01016011, 0x0101201f,
> + 0x183301f0, 0x90a000f0, 0x90a000f0, 0x01442070,
> + 0x01c42190, 0x40000100, 0x40000100, 0x40000100,
> +};
> +
> +static unsigned int d965_3st_pin_configs[16] = {
> 0x0221401f, 0x02a19120, 0x40000100, 0x01014011,
> 0x01a19021, 0x01813024, 0x40000100, 0x40000100,
> 0x40000100, 0x40000100, 0x40000100, 0x40000100,
> - 0x40000100, 0x40000100
> -};
> -
> -static unsigned int d965_5st_pin_configs[14] = {
> + 0x40000100, 0x40000100, 0x40000100, 0x40000100,
> +};
> +
> +static unsigned int d965_5st_pin_configs[16] = {
> 0x02214020, 0x02a19080, 0x0181304e, 0x01014010,
> 0x01a19040, 0x01011012, 0x01016011, 0x40000100,
> 0x40000100, 0x40000100, 0x40000100, 0x01442070,
> - 0x40000100, 0x40000100
> -};
> -
> -static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = {
> - [STAC_REF] = ref927x_pin_configs,
> + 0x40000100, 0x40000100, 0x40000100, 0x40000100,
> +};
> +
> +static unsigned int *stac9227_brd_tbl[] = {
> + [STAC_REF] = ref9227_pin_configs,
> [STAC_D965_3ST] = d965_3st_pin_configs,
> [STAC_D965_5ST] = d965_5st_pin_configs,
> };
>
> -static struct hda_board_config stac927x_cfg_tbl[] = {
> +static struct hda_board_config stac9227_cfg_tbl[] = {
> { .modelname = "5stack", .config = STAC_D965_5ST },
> { .modelname = "3stack", .config = STAC_D965_3ST },
> { .modelname = "ref",
> @@ -576,10 +670,22 @@ static struct hda_board_config stac927x_
> {} /* terminator */
> };
>
> +static unsigned int *stac927x_brd_tbl[] = {
> + [STAC_REF] = ref927x_pin_configs,
> +};
> +
> +static struct hda_board_config stac927x_cfg_tbl[] = {
> + { .modelname = "ref",
> + .pci_subvendor = PCI_VENDOR_ID_INTEL,
> + .pci_subdevice = 0x2668, /* DFI LanParty */
> + .config = STAC_REF }, /* SigmaTel reference board */
> + {} /* terminator */
> +};
> +
> static unsigned int ref9205_pin_configs[12] = {
> 0x40000100, 0x40000100, 0x01016011, 0x01014010,
> - 0x01813122, 0x01a19021, 0x40000100, 0x40000100,
> - 0x40000100, 0x40000100, 0x01441030, 0x01c41030
> + 0x01813122, 0x01a19021, 0x40000100, 0x40000100,
> + 0x90a000f0, 0x90a000f0, 0x01441030, 0x01c41030
> };
>
> static unsigned int *stac9205_brd_tbl[] = {
> @@ -1154,6 +1260,49 @@ static int stac92xx_auto_create_hp_ctls(
> return 0;
> }
>
> +/* labels for dmic mux inputs */
> +const char *stac92xx_dmic_labels[5] = {
> + "Analog Inputs", "Digital Mic 1", "Digital Mic 2", "Digital Mic 3", "Digital Mic 4"
> +};
> +
> +/* create playback/capture controls for input pins on dmic capable codecs */
> +static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
> +{
> + struct sigmatel_spec *spec = codec->spec;
> + struct hda_input_mux *dimux = &spec->private_dimux;
> + hda_nid_t con_lst[HDA_MAX_NUM_INPUTS];
> + int i, j;
> +
> + dimux->items[dimux->num_items].label = stac92xx_dmic_labels[0];
> + dimux->items[dimux->num_items].index = 0;
> + dimux->num_items++;
> +
> + for (i = 0; i < spec->num_dmics; i++) {
> + int index;
> + int num_cons;
> + unsigned int def_conf = snd_hda_codec_read(codec, spec->dmic_nids[i], 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
> + if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
> + continue;
> +
> + num_cons = snd_hda_get_connections(codec,
> + spec->dmux_nid,
> + con_lst,
> + HDA_MAX_NUM_INPUTS);
> + for (j = 0; j < num_cons; j++)
> + if (con_lst[j] == spec->dmic_nids[i]) {
> + index = j;
> + goto found;
> + }
> + continue;
> +found:
> + dimux->items[dimux->num_items].label = stac92xx_dmic_labels[dimux->num_items];
> + dimux->items[dimux->num_items].index = index;
> + dimux->num_items++;
> + }
> +
> + return 0;
> +}
> +
> /* create playback/capture controls for input pins */
> static int stac92xx_auto_create_analog_input_ctls(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
> {
> @@ -1238,7 +1387,7 @@ static int stac92xx_parse_auto_config(st
> struct sigmatel_spec *spec = codec->spec;
> int err;
>
> - if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL)) < 0)
> + if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, spec->dmic_nids)) < 0)
> return err;
> if (! spec->autocfg.line_outs)
> return 0; /* can't find valid pin config */
> @@ -1254,6 +1403,10 @@ static int stac92xx_parse_auto_config(st
> (err = stac92xx_auto_create_analog_input_ctls(codec, &spec->autocfg)) < 0)
> return err;
>
> + if (spec->num_dmics > 0)
> + if ((err = stac92xx_auto_create_dmic_input_ctls(codec, &spec->autocfg)) < 0)
> + return err;
> +
> spec->multiout.max_channels = spec->multiout.num_dacs * 2;
> if (spec->multiout.max_channels > 2)
> spec->surr_switch = 1;
> @@ -1267,6 +1420,7 @@ static int stac92xx_parse_auto_config(st
> spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
>
> spec->input_mux = &spec->private_imux;
> + spec->dinput_mux = &spec->private_dimux;
>
> return 1;
> }
> @@ -1366,6 +1520,7 @@ static int stac9200_parse_auto_config(st
> spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
>
> spec->input_mux = &spec->private_imux;
> + spec->dinput_mux = &spec->private_dimux;
>
> return 1;
> }
> @@ -1448,6 +1603,11 @@ static int stac92xx_init(struct hda_code
> stac92xx_auto_set_pinctl(codec, nid, pinctl);
> }
> }
> + if (spec->num_dmics > 0)
> + for (i = 0; i < spec->num_dmics; i++)
> + stac92xx_auto_set_pinctl(codec, spec->dmic_nids[i],
> + AC_PINCTL_IN_EN);
> +
> if (cfg->dig_out_pin)
> stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
> AC_PINCTL_OUT_EN);
> @@ -1618,6 +1778,7 @@ static int patch_stac9200(struct hda_cod
> spec->adc_nids = stac9200_adc_nids;
> spec->mux_nids = stac9200_mux_nids;
> spec->num_muxes = 1;
> + spec->num_dmics = 0;
>
> spec->init = stac9200_core_init;
> spec->mixer = stac9200_mixer;
> @@ -1663,6 +1824,7 @@ static int patch_stac922x(struct hda_cod
> spec->adc_nids = stac922x_adc_nids;
> spec->mux_nids = stac922x_mux_nids;
> spec->num_muxes = 2;
> + spec->num_dmics = 0;
>
> spec->init = stac922x_core_init;
> spec->mixer = stac922x_mixer;
> @@ -1677,6 +1839,73 @@ static int patch_stac922x(struct hda_cod
>
> if (spec->board_config == STAC_MACMINI)
> spec->gpio_mute = 1;
> +
> + codec->patch_ops = stac92xx_patch_ops;
> +
> + return 0;
> +}
> +
> +static int patch_stac9227(struct hda_codec *codec)
> +{
> + struct sigmatel_spec *spec;
> + int err;
> +
> + spec = kzalloc(sizeof(*spec), GFP_KERNEL);
> + if (spec == NULL)
> + return -ENOMEM;
> +
> + codec->spec = spec;
> + spec->num_pins = 14;
> + spec->pin_nids = stac9227_pin_nids;
> + spec->board_config = snd_hda_check_board_config(codec, stac9227_cfg_tbl);
> + if (spec->board_config < 0) {
> + snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9227, using BIOS defaults\n");
> + err = stac92xx_save_bios_config_regs(codec);
> + if (err < 0) {
> + stac92xx_free(codec);
> + return err;
> + }
> + spec->pin_configs = spec->bios_pin_configs;
> + } else if (stac9227_brd_tbl[spec->board_config] != NULL) {
> + spec->pin_configs = stac9227_brd_tbl[spec->board_config];
> + stac92xx_set_config_regs(codec);
> + }
> +
> + switch (spec->board_config) {
> + case STAC_D965_3ST:
> + spec->adc_nids = stac9227_adc_nids;
> + spec->mux_nids = stac9227_mux_nids;
> + spec->num_muxes = 3;
> + spec->num_dmics = 0;
> + spec->init = d965_core_init;
> + spec->mixer = stac9227_mixer;
> + break;
> + case STAC_D965_5ST:
> + spec->adc_nids = stac9227_adc_nids;
> + spec->mux_nids = stac9227_mux_nids;
> + spec->num_muxes = 3;
> + spec->num_dmics = 0;
> + spec->init = d965_core_init;
> + spec->mixer = stac9227_mixer;
> + break;
> + default:
> + spec->adc_nids = stac9227_adc_nids;
> + spec->mux_nids = stac9227_mux_nids;
> + spec->num_muxes = 3;
> + spec->dmic_nids = stac9227_dmic_nids;
> + spec->num_dmics = 2;
> + spec->dmux_nid = 0x1b;
> + spec->init = stac9227_core_init;
> + spec->mixer = stac9227_mixer;
> + }
> +
> + spec->multiout.dac_nids = spec->dac_nids;
> +
> + err = stac92xx_parse_auto_config(codec, 0x1e, 0x20);
> + if (err < 0) {
> + stac92xx_free(codec);
> + return err;
> + }
>
> codec->patch_ops = stac92xx_patch_ops;
>
> @@ -1709,28 +1938,14 @@ static int patch_stac927x(struct hda_cod
> stac92xx_set_config_regs(codec);
> }
>
> - switch (spec->board_config) {
> - case STAC_D965_3ST:
> - spec->adc_nids = stac927x_adc_nids;
> - spec->mux_nids = stac927x_mux_nids;
> - spec->num_muxes = 3;
> - spec->init = d965_core_init;
> - spec->mixer = stac9227_mixer;
> - break;
> - case STAC_D965_5ST:
> - spec->adc_nids = stac927x_adc_nids;
> - spec->mux_nids = stac927x_mux_nids;
> - spec->num_muxes = 3;
> - spec->init = d965_core_init;
> - spec->mixer = stac9227_mixer;
> - break;
> - default:
> - spec->adc_nids = stac927x_adc_nids;
> - spec->mux_nids = stac927x_mux_nids;
> - spec->num_muxes = 3;
> - spec->init = stac927x_core_init;
> - spec->mixer = stac927x_mixer;
> - }
> + spec->adc_nids = stac927x_adc_nids;
> + spec->mux_nids = stac927x_mux_nids;
> + spec->num_muxes = 3;
> + spec->dmic_nids = stac927x_dmic_nids;
> + spec->num_dmics = 2;
> + spec->dmux_nid = 0x1b;
> + spec->init = stac927x_core_init;
> + spec->mixer = stac927x_mixer;
>
> spec->multiout.dac_nids = spec->dac_nids;
>
> @@ -1773,7 +1988,10 @@ static int patch_stac9205(struct hda_cod
>
> spec->adc_nids = stac9205_adc_nids;
> spec->mux_nids = stac9205_mux_nids;
> - spec->num_muxes = 3;
> + spec->num_muxes = 2;
> + spec->dmic_nids = stac9205_dmic_nids;
> + spec->num_dmics = 2;
> + spec->dmux_nid = 0x1d;
>
> spec->init = stac9205_core_init;
> spec->mixer = stac9205_mixer;
> @@ -2039,12 +2257,12 @@ struct hda_codec_preset snd_hda_preset_s
> { .id = 0x83847681, .name = "STAC9220D/9223D A2", .patch = patch_stac922x },
> { .id = 0x83847682, .name = "STAC9221 A2", .patch = patch_stac922x },
> { .id = 0x83847683, .name = "STAC9221D A2", .patch = patch_stac922x },
> - { .id = 0x83847618, .name = "STAC9227", .patch = patch_stac927x },
> - { .id = 0x83847619, .name = "STAC9227", .patch = patch_stac927x },
> - { .id = 0x83847616, .name = "STAC9228", .patch = patch_stac927x },
> - { .id = 0x83847617, .name = "STAC9228", .patch = patch_stac927x },
> - { .id = 0x83847614, .name = "STAC9229", .patch = patch_stac927x },
> - { .id = 0x83847615, .name = "STAC9229", .patch = patch_stac927x },
> + { .id = 0x83847618, .name = "STAC9227", .patch = patch_stac9227 },
> + { .id = 0x83847619, .name = "STAC9227", .patch = patch_stac9227 },
> + { .id = 0x83847616, .name = "STAC9228", .patch = patch_stac9227 },
> + { .id = 0x83847617, .name = "STAC9228", .patch = patch_stac9227 },
> + { .id = 0x83847614, .name = "STAC9229", .patch = patch_stac9227 },
> + { .id = 0x83847615, .name = "STAC9229", .patch = patch_stac9227 },
> { .id = 0x83847620, .name = "STAC9274", .patch = patch_stac927x },
> { .id = 0x83847621, .name = "STAC9274D", .patch = patch_stac927x },
> { .id = 0x83847622, .name = "STAC9273X", .patch = patch_stac927x },
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
--
Tobin Davis <tdavis@dsl-only.net>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
next prev parent reply other threads:[~2006-10-25 20:53 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-25 20:21 [PATCH] hda: add sigmatel dig mic support and refactor 9227 Matt Porter
2006-10-25 20:38 ` Lee Revell
2006-10-25 21:00 ` Matt Porter
2006-10-25 20:53 ` Tobin Davis [this message]
2006-10-25 21:41 ` Matt Porter
2006-10-25 22:32 ` Tobin Davis
2006-10-26 13:38 ` Matt Porter
2006-10-26 13:40 ` Takashi Iwai
2006-10-26 14:54 ` Tobin Davis
2006-10-26 15:08 ` Takashi Iwai
2006-10-26 11:02 ` Takashi Iwai
2006-10-26 14:36 ` Matt Porter
2006-10-26 15:03 ` Tobin Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1161809636.18211.65.camel@razman \
--to=tdavis@dsl-only.net \
--cc=alsa-devel@alsa-project.org \
--cc=mporter@embeddedalley.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox