From: Tobin Davis <tdavis@dsl-only.net>
To: Shaw Terwilliger <sterwill@sourcegear.com>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: Intel HDA on Mac Pro
Date: Mon, 04 Dec 2006 12:51:51 -0800 [thread overview]
Message-ID: <1165265511.32312.86.camel@razman> (raw)
In-Reply-To: <4574866D.5070506@sourcegear.com>
[-- Attachment #1.1: Type: text/plain, Size: 1645 bytes --]
Well, to start, we'll need to know the exact codec information. Type
"cat /proc/asound/card0/codec*" to find out. To add your specific
configuration to the driver (if it isn't in the tree already), we'll
also need the subsystem ID from lspci. Assuming the audio device is on
pci bus 0:1b.0, type 'lspci -s 0:1b -vn" to get that.
>From there, it's probably just a matter of trying different config
models from the ALSA-Configuration.txt (it's in
alsa-driver-1.0.13/alsa-kernel/Documentation if you downloaded the
driver source, or it is in the kernel documentation).
Tobin Davis
On Mon, 2006-12-04 at 14:34 -0600, Shaw Terwilliger wrote:
> I just got a new Mac Pro (not MacBook Pro) that appears to contain an
> on-board Intel High Definition Audio interface (Realtek variation, as
> far as I can tell via "detect" debug). The ALSA drivers in 2.6.17
> detect the card correctly and my mixer shows all the right channels, but
> no sound comes out. I compiled and installed the latest ALSA (1.0.13)
> and have the same issue. I have only found a few others running Linux
> on the Mac Pro, and they seem to have the same issue.
>
> Other people have reported the MacBook Pro had similar issues (no sound
> out the line-out jack), and a patch was floating around that rewired
> some of the mixing to make it work. The MacBook Pro seems to use a
> different HDA implementation (Sigmatel, I think) so I'm not sure if the
> patch logic makes sense on the Mac Pro.
>
> I figured this list was probably the best place to ask: has anyone
> hacked on this driver before? Where should I start digging?
>
--
Tobin Davis <tdavis@dsl-only.net>
[-- Attachment #1.2: Type: text/html, Size: 2492 bytes --]
[-- Attachment #2: Type: text/plain, Size: 347 bytes --]
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
[-- Attachment #3: Type: text/plain, Size: 161 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
next prev parent reply other threads:[~2006-12-04 20:51 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-12-04 20:34 Intel HDA on Mac Pro Shaw Terwilliger
2006-12-04 20:51 ` Tobin Davis [this message]
2006-12-04 21:02 ` Shaw Terwilliger
2006-12-04 23:45 ` Tobin Davis
2006-12-05 0:19 ` Shaw Terwilliger
2006-12-05 0:30 ` Tobin Davis
2006-12-05 4:02 ` Shaw Terwilliger
[not found] ` <457828D7.4020908@teamprise.com>
2006-12-07 14:51 ` Tobin Davis
2006-12-07 23:46 ` Tobin Davis
2006-12-08 19:39 ` Shaw Terwilliger
2006-12-10 16:16 ` Tobin Davis
2006-12-11 14:43 ` Shaw Terwilliger
2006-12-11 16:33 ` Tobin Davis
2006-12-11 16:52 ` Shaw Terwilliger
2006-12-11 17:05 ` Tobin Davis
2006-12-11 17:13 ` Shaw Terwilliger
2006-12-11 17:43 ` Tobin Davis
2006-12-11 19:09 ` Shaw Terwilliger
2006-12-11 22:10 ` Richard
2006-12-11 22:55 ` Tobin Davis
[not found] ` <f0d712d60612111704x14717093p6e038641fc6e94e6@mail.gmail.com>
2006-12-13 15:22 ` Tobin Davis
2006-12-13 16:36 ` Shaw Terwilliger
2006-12-13 17:11 ` Tobin Davis
2006-12-14 7:01 ` Tobin Davis
2006-12-14 15:10 ` Shaw Terwilliger
2006-12-14 16:51 ` Tobin Davis
2006-12-14 21:24 ` Shaw Terwilliger
2006-12-15 2:28 ` Tobin Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1165265511.32312.86.camel@razman \
--to=tdavis@dsl-only.net \
--cc=alsa-devel@lists.sourceforge.net \
--cc=sterwill@sourcegear.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox