From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 12/18] ASoC: Remove unused DAI format defines
Date: Tue, 5 May 2009 11:02:25 +0100 [thread overview]
Message-ID: <1241517751-2634-12-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <20090505100123.GB2050@rakim.wolfsonmicro.main>
The defines for TDM and synchronous clocks are not used - they are
mostly a legacy of the automatic clocking configuration. TDM will
require configuration of the number of timeslots and which ones to use
so can't be fit into the DAI format and synchronous mode is handled by
symmetric_rates (and needs to be done by constraints rather than when
the DAI format is being configured).
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
include/sound/soc-dai.h | 18 ------------------
1 files changed, 0 insertions(+), 18 deletions(-)
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index ea07b4b..a997c2c 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -45,24 +45,6 @@ struct snd_pcm_substream;
#define SND_SOC_DAIFMT_GATED (1 << 4) /* clock is gated */
/*
- * DAI Left/Right Clocks.
- *
- * Specifies whether the DAI can support different samples for similtanious
- * playback and capture. This usually requires a seperate physical frame
- * clock for playback and capture.
- */
-#define SND_SOC_DAIFMT_SYNC (0 << 5) /* Tx FRM = Rx FRM */
-#define SND_SOC_DAIFMT_ASYNC (1 << 5) /* Tx FRM ~ Rx FRM */
-
-/*
- * TDM
- *
- * Time Division Multiplexing. Allows PCM data to be multplexed with other
- * data on the DAI.
- */
-#define SND_SOC_DAIFMT_TDM (1 << 6)
-
-/*
* DAI hardware signal inversions.
*
* Specifies whether the DAI can also support inverted clocks for the specified
--
1.6.2.4
next prev parent reply other threads:[~2009-05-05 10:02 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-05 10:01 ASoC updates for 2.6.31 Mark Brown
2009-05-05 10:02 ` [PATCH 01/18] ASoC: Fix error message formatting in s3c64xx-i2s driver Mark Brown
2009-05-05 10:02 ` [PATCH 02/18] ASoC: Check for supported CPUs when building s3c-i2s-v2 Mark Brown
2009-05-05 10:02 ` [PATCH 03/18] ASoC: Make S3C64xx clock export function to return struct clk Mark Brown
2009-05-05 10:02 ` [PATCH 04/18] ASoC: Fix data format configuration for S3C64xx IISv2 and add 24 bit Mark Brown
2009-05-05 10:02 ` [PATCH 05/18] ASoC: Fix boot warnings from S3C IISv2 Mark Brown
2009-05-05 10:02 ` [PATCH 06/18] ASoC: Allow use of resource from the platform device for " Mark Brown
2009-05-05 10:02 ` [PATCH 07/18] ASoC: Display the clock rate used as the basis for rate calculation Mark Brown
2009-05-05 10:02 ` [PATCH 08/18] ASoC: Display S3C IISv2 mode and MS errors by default Mark Brown
2009-05-05 10:02 ` [PATCH 09/18] ASoC: Staticise txctrl and rxctrl for S3C IISv2 Mark Brown
2009-05-05 10:02 ` [PATCH 10/18] ASoC: Use platform device resource for S3C64xx IISv2 Mark Brown
2009-05-05 10:02 ` [PATCH 11/18] ASoC: Use a shared define for AC97 CODEC data formats Mark Brown
2009-05-05 10:02 ` Mark Brown [this message]
2009-05-05 10:02 ` [PATCH 13/18] ASoC: Fix errors in WM8990 Mark Brown
2009-05-05 10:02 ` [PATCH 14/18] ASoC: TWL4030: Add VDL analog bypass Mark Brown
2009-05-05 10:02 ` [PATCH 15/18] ASoC: TWL4030: Add voice digital loopback: sidetone Mark Brown
2009-05-05 10:02 ` [PATCH 16/18] ASoC: IMote2 ASoC Support Mark Brown
2009-05-05 10:02 ` [PATCH 17/18] ASoC: TWL4030: Add VIBRA output Mark Brown
2009-05-05 10:02 ` [PATCH 18/18] ASoC: Remove redundant codec pointer from DAIs Mark Brown
2009-05-05 10:45 ` ASoC updates for 2.6.31 Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1241517751-2634-12-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox