From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
"Lopez Cruz, Misael" <x0052729@ti.com>
Subject: [PATCH 15/18] ASoC: TWL4030: Add voice digital loopback: sidetone
Date: Tue, 5 May 2009 11:02:28 +0100 [thread overview]
Message-ID: <1241517751-2634-15-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <20090505100123.GB2050@rakim.wolfsonmicro.main>
From: Lopez Cruz, Misael <x0052729@ti.com>
This patch add voice digital loopback (sidetone) to the twl4030
driver. It mixes voice uplink attenuated (by sidetone gain) with
voice downlink when the codec is working in option2 (voice/audio
mode).
Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
sound/soc/codecs/twl4030.c | 27 +++++++++++++++++++++++++--
1 files changed, 25 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index efb371f..23bae74 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -491,6 +491,18 @@ static const struct snd_kcontrol_new twl4030_dapm_dbypassr_control =
TWL4030_REG_ATX2ARXPGA, 0, 7, 0,
twl4030_dapm_dbypass_tlv);
+/*
+ * Voice Sidetone GAIN volume control:
+ * from -51 to -10 dB in 1 dB steps (mute instead of -51 dB)
+ */
+static DECLARE_TLV_DB_SCALE(twl4030_dapm_dbypassv_tlv, -5100, 100, 1);
+
+/* Digital bypass voice: sidetone (VUL -> VDL)*/
+static const struct snd_kcontrol_new twl4030_dapm_dbypassv_control =
+ SOC_DAPM_SINGLE_TLV("Volume",
+ TWL4030_REG_VSTPGA, 0, 0x29, 0,
+ twl4030_dapm_dbypassv_tlv);
+
static int micpath_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
@@ -607,12 +619,18 @@ static int bypass_event(struct snd_soc_dapm_widget *w,
twl4030->bypass_state |= (1 << 4);
else
twl4030->bypass_state &= ~(1 << 4);
+ } else if (m->reg == TWL4030_REG_VSTPGA) {
+ /* Voice digital bypass */
+ if (reg)
+ twl4030->bypass_state |= (1 << 5);
+ else
+ twl4030->bypass_state &= ~(1 << 5);
} else {
/* Digital bypass */
if (reg & (0x7 << m->shift))
- twl4030->bypass_state |= (1 << (m->shift ? 6 : 5));
+ twl4030->bypass_state |= (1 << (m->shift ? 7 : 6));
else
- twl4030->bypass_state &= ~(1 << (m->shift ? 6 : 5));
+ twl4030->bypass_state &= ~(1 << (m->shift ? 7 : 6));
}
/* Enable master analog loopback mode if any analog switch is enabled*/
@@ -991,6 +1009,9 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
SND_SOC_DAPM_SWITCH_E("Right Digital Loopback", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_dbypassr_control, bypass_event,
SND_SOC_DAPM_POST_REG),
+ SND_SOC_DAPM_SWITCH_E("Voice Digital Loopback", SND_SOC_NOPM, 0, 0,
+ &twl4030_dapm_dbypassv_control, bypass_event,
+ SND_SOC_DAPM_POST_REG),
SND_SOC_DAPM_MIXER("Analog R1 Playback Mixer", TWL4030_REG_AVDAC_CTL,
0, 0, NULL, 0),
@@ -1203,9 +1224,11 @@ static const struct snd_soc_dapm_route intercon[] = {
/* Digital bypass routes */
{"Right Digital Loopback", "Volume", "TX1 Capture Route"},
{"Left Digital Loopback", "Volume", "TX1 Capture Route"},
+ {"Voice Digital Loopback", "Volume", "TX2 Capture Route"},
{"Analog R2 Playback Mixer", NULL, "Right Digital Loopback"},
{"Analog L2 Playback Mixer", NULL, "Left Digital Loopback"},
+ {"Analog Voice Playback Mixer", NULL, "Voice Digital Loopback"},
};
--
1.6.2.4
next prev parent reply other threads:[~2009-05-05 10:02 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-05 10:01 ASoC updates for 2.6.31 Mark Brown
2009-05-05 10:02 ` [PATCH 01/18] ASoC: Fix error message formatting in s3c64xx-i2s driver Mark Brown
2009-05-05 10:02 ` [PATCH 02/18] ASoC: Check for supported CPUs when building s3c-i2s-v2 Mark Brown
2009-05-05 10:02 ` [PATCH 03/18] ASoC: Make S3C64xx clock export function to return struct clk Mark Brown
2009-05-05 10:02 ` [PATCH 04/18] ASoC: Fix data format configuration for S3C64xx IISv2 and add 24 bit Mark Brown
2009-05-05 10:02 ` [PATCH 05/18] ASoC: Fix boot warnings from S3C IISv2 Mark Brown
2009-05-05 10:02 ` [PATCH 06/18] ASoC: Allow use of resource from the platform device for " Mark Brown
2009-05-05 10:02 ` [PATCH 07/18] ASoC: Display the clock rate used as the basis for rate calculation Mark Brown
2009-05-05 10:02 ` [PATCH 08/18] ASoC: Display S3C IISv2 mode and MS errors by default Mark Brown
2009-05-05 10:02 ` [PATCH 09/18] ASoC: Staticise txctrl and rxctrl for S3C IISv2 Mark Brown
2009-05-05 10:02 ` [PATCH 10/18] ASoC: Use platform device resource for S3C64xx IISv2 Mark Brown
2009-05-05 10:02 ` [PATCH 11/18] ASoC: Use a shared define for AC97 CODEC data formats Mark Brown
2009-05-05 10:02 ` [PATCH 12/18] ASoC: Remove unused DAI format defines Mark Brown
2009-05-05 10:02 ` [PATCH 13/18] ASoC: Fix errors in WM8990 Mark Brown
2009-05-05 10:02 ` [PATCH 14/18] ASoC: TWL4030: Add VDL analog bypass Mark Brown
2009-05-05 10:02 ` Mark Brown [this message]
2009-05-05 10:02 ` [PATCH 16/18] ASoC: IMote2 ASoC Support Mark Brown
2009-05-05 10:02 ` [PATCH 17/18] ASoC: TWL4030: Add VIBRA output Mark Brown
2009-05-05 10:02 ` [PATCH 18/18] ASoC: Remove redundant codec pointer from DAIs Mark Brown
2009-05-05 10:45 ` ASoC updates for 2.6.31 Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1241517751-2634-15-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
--cc=x0052729@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox