From: Andy Owen <andy-alsa@ultra-premium.com>
To: patch@alsa-project.org
Cc: alsa-devel@alsa-project.org, Andy Owen <andy-alsa@ultra-premium.com>
Subject: [PATCH - ca0106 2/6] ALSA: ca0106: Pull out dac powering routine into separate function.
Date: Thu, 21 Oct 2010 23:39:20 +1100 [thread overview]
Message-ID: <1287664764-4996-2-git-send-email-andy-alsa@ultra-premium.com> (raw)
In-Reply-To: <1287664764-4996-1-git-send-email-andy-alsa@ultra-premium.com>
Signed-off-by: Andy Owen <andy-alsa@ultra-premium.com>
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 6dc9a5d..22d2f6b 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -514,6 +514,23 @@ static void restore_spdif_bits(struct snd_ca0106 *chip, int idx)
}
}
+static int snd_ca0106_pcm_power_dac(struct snd_ca0106 *chip, int channel_id,
+ int power)
+{
+ if (chip->details->spi_dac) {
+ const int reg = spi_dacd_reg[channel_id];
+
+ if (power)
+ /* Power up */
+ chip->spi_dac_reg[reg] &= ~spi_dacd_bit[channel_id];
+ else
+ /* Power down */
+ chip->spi_dac_reg[reg] |= spi_dacd_bit[channel_id];
+ return snd_ca0106_spi_write(chip, chip->spi_dac_reg[reg]);
+ }
+ return 0;
+}
+
/* open_playback callback */
static int snd_ca0106_pcm_open_playback_channel(struct snd_pcm_substream *substream,
int channel_id)
@@ -553,12 +570,9 @@ static int snd_ca0106_pcm_open_playback_channel(struct snd_pcm_substream *substr
return err;
snd_pcm_set_sync(substream);
- if (chip->details->spi_dac && channel_id != PCM_FRONT_CHANNEL) {
- const int reg = spi_dacd_reg[channel_id];
-
- /* Power up dac */
- chip->spi_dac_reg[reg] &= ~spi_dacd_bit[channel_id];
- err = snd_ca0106_spi_write(chip, chip->spi_dac_reg[reg]);
+ /* Front channel dac should already be on */
+ if (channel_id != PCM_FRONT_CHANNEL) {
+ err = snd_ca0106_pcm_power_dac(chip, channel_id, 1);
if (err < 0)
return err;
}
@@ -578,13 +592,14 @@ static int snd_ca0106_pcm_close_playback(struct snd_pcm_substream *substream)
restore_spdif_bits(chip, epcm->channel_id);
- if (chip->details->spi_dac && epcm->channel_id != PCM_FRONT_CHANNEL) {
- const int reg = spi_dacd_reg[epcm->channel_id];
-
- /* Power down DAC */
- chip->spi_dac_reg[reg] |= spi_dacd_bit[epcm->channel_id];
- snd_ca0106_spi_write(chip, chip->spi_dac_reg[reg]);
+ /* Front channel dac should stay on */
+ if (epcm->channel_id != PCM_FRONT_CHANNEL) {
+ int err;
+ err = snd_ca0106_pcm_power_dac(chip, epcm->channel_id, 0);
+ if (err < 0)
+ return err;
}
+
/* FIXME: maybe zero others */
return 0;
}
--
1.7.3.1.127.g1bb28
next prev parent reply other threads:[~2010-10-21 12:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-21 12:39 [PATCH - ca0106 1/6] ALSA: ca0106 - add Sound Blaster 5.1vx info Andy Owen
2010-10-21 12:39 ` Andy Owen [this message]
2010-10-21 12:39 ` [PATCH - ca0106 3/6] ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence Andy Owen
2010-10-21 12:39 ` [PATCH - ca0106 4/6] ALSA: ca0106: Create a nice spot for mapping channels to dacs Andy Owen
2010-10-21 12:39 ` [PATCH - ca0106 5/6] ALSA: ca0106: Allow different sound cards to use different SPI channel mappings Andy Owen
2010-10-21 12:39 ` [PATCH - ca0106 6/6] ALSA: ca0106: Use card specific dac id for mute controls Andy Owen
2010-10-21 21:16 ` [PATCH - ca0106 1/6] ALSA: ca0106 - add Sound Blaster 5.1vx info Takashi Iwai
2010-10-23 6:28 ` Andy Owen
[not found] ` <1287814690.1940.4.camel@marvin>
2010-10-23 9:22 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287664764-4996-2-git-send-email-andy-alsa@ultra-premium.com \
--to=andy-alsa@ultra-premium.com \
--cc=alsa-devel@alsa-project.org \
--cc=patch@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox