Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Fabio Baltieri <fabio.baltieri@linaro.org>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>,
	Lee Jones <lee.jones@linaro.org>,
	Ola Lilja <ola.o.lilja@stericsson.com>,
	Fabio Baltieri <fabio.baltieri@linaro.org>
Subject: [PATCH 3/6] ASoC: ux500: Drop pinctrl sleep support
Date: Wed,  8 May 2013 09:14:18 +0200	[thread overview]
Message-ID: <1367997261-32048-4-git-send-email-fabio.baltieri@linaro.org> (raw)
In-Reply-To: <1367997261-32048-1-git-send-email-fabio.baltieri@linaro.org>

Drop pinctrl default/sleep state switching code, as it was breaking the
capture interface by putting the I2S pins in hi-z mode regardless of its
usage status, and not giving any real benefit.

Pinctrl default mode configuration is already managed automatically by a
specific pinctrl hog.

Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
---
 sound/soc/ux500/ux500_msp_i2s.c | 56 ++---------------------------------------
 sound/soc/ux500/ux500_msp_i2s.h |  6 -----
 2 files changed, 2 insertions(+), 60 deletions(-)

diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c
index 964cfd6..8512c78 100644
--- a/sound/soc/ux500/ux500_msp_i2s.c
+++ b/sound/soc/ux500/ux500_msp_i2s.c
@@ -15,7 +15,6 @@
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/io.h>
@@ -28,9 +27,6 @@
 
 #include "ux500_msp_i2s.h"
 
-/* MSP1/3 Tx/Rx usage protection */
-static DEFINE_SPINLOCK(msp_rxtx_lock);
-
  /* Protocol desciptors */
 static const struct msp_protdesc prot_descs[] = {
 	{ /* I2S */
@@ -358,24 +354,8 @@ static int configure_multichannel(struct ux500_msp *msp,
 
 static int enable_msp(struct ux500_msp *msp, struct ux500_msp_config *config)
 {
-	int status = 0, retval = 0;
+	int status = 0;
 	u32 reg_val_DMACR, reg_val_GCR;
-	unsigned long flags;
-
-	/* Check msp state whether in RUN or CONFIGURED Mode */
-	if (msp->msp_state == MSP_STATE_IDLE) {
-		spin_lock_irqsave(&msp_rxtx_lock, flags);
-		if (msp->pinctrl_rxtx_ref == 0 &&
-			!(IS_ERR(msp->pinctrl_p) || IS_ERR(msp->pinctrl_def))) {
-			retval = pinctrl_select_state(msp->pinctrl_p,
-						msp->pinctrl_def);
-			if (retval)
-				pr_err("could not set MSP defstate\n");
-		}
-		if (!retval)
-			msp->pinctrl_rxtx_ref++;
-		spin_unlock_irqrestore(&msp_rxtx_lock, flags);
-	}
 
 	/* Configure msp with protocol dependent settings */
 	configure_protocol(msp, config);
@@ -632,8 +612,7 @@ int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd, int direction)
 
 int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir)
 {
-	int status = 0, retval = 0;
-	unsigned long flags;
+	int status = 0;
 
 	dev_dbg(msp->dev, "%s: Enter (dir = 0x%01x).\n", __func__, dir);
 
@@ -645,18 +624,6 @@ int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir)
 			       (~(FRAME_GEN_ENABLE | SRG_ENABLE))),
 			      msp->registers + MSP_GCR);
 
-		spin_lock_irqsave(&msp_rxtx_lock, flags);
-		WARN_ON(!msp->pinctrl_rxtx_ref);
-		msp->pinctrl_rxtx_ref--;
-		if (msp->pinctrl_rxtx_ref == 0 &&
-			!(IS_ERR(msp->pinctrl_p) || IS_ERR(msp->pinctrl_sleep))) {
-			retval = pinctrl_select_state(msp->pinctrl_p,
-						msp->pinctrl_sleep);
-			if (retval)
-				pr_err("could not set MSP sleepstate\n");
-		}
-		spin_unlock_irqrestore(&msp_rxtx_lock, flags);
-
 		writel(0, msp->registers + MSP_GCR);
 		writel(0, msp->registers + MSP_TCF);
 		writel(0, msp->registers + MSP_RCF);
@@ -745,25 +712,6 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev,
 	dev_dbg(&pdev->dev, "I2S device-name: '%s'\n", i2s_cont->name);
 	msp->i2s_cont = i2s_cont;
 
-	msp->pinctrl_p = pinctrl_get(msp->dev);
-	if (IS_ERR(msp->pinctrl_p))
-		dev_err(&pdev->dev, "could not get MSP pinctrl\n");
-	else {
-		msp->pinctrl_def = pinctrl_lookup_state(msp->pinctrl_p,
-						PINCTRL_STATE_DEFAULT);
-		if (IS_ERR(msp->pinctrl_def)) {
-			dev_err(&pdev->dev,
-				"could not get MSP defstate (%li)\n",
-				PTR_ERR(msp->pinctrl_def));
-		}
-		msp->pinctrl_sleep = pinctrl_lookup_state(msp->pinctrl_p,
-						PINCTRL_STATE_SLEEP);
-		if (IS_ERR(msp->pinctrl_sleep))
-			dev_err(&pdev->dev,
-				"could not get MSP idlestate (%li)\n",
-				PTR_ERR(msp->pinctrl_def));
-	}
-
 	return 0;
 }
 
diff --git a/sound/soc/ux500/ux500_msp_i2s.h b/sound/soc/ux500/ux500_msp_i2s.h
index 1311c0d..1ce336f 100644
--- a/sound/soc/ux500/ux500_msp_i2s.h
+++ b/sound/soc/ux500/ux500_msp_i2s.h
@@ -530,12 +530,6 @@ struct ux500_msp {
 	int loopback_enable;
 	u32 backup_regs[MAX_MSP_BACKUP_REGS];
 	unsigned int f_bitclk;
-	/* Pin modes */
-	struct pinctrl *pinctrl_p;
-	struct pinctrl_state *pinctrl_def;
-	struct pinctrl_state *pinctrl_sleep;
-	/* Reference Count */
-	int pinctrl_rxtx_ref;
 };
 
 struct ux500_msp_dma_params {
-- 
1.8.2

  parent reply	other threads:[~2013-05-08  7:14 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-08  7:14 [PATCH 0/6] Second set of fixes for ux500 ASoC drivers Fabio Baltieri
2013-05-08  7:14 ` [PATCH 1/6] ASoC: ab8500-codec: Add missing ad_to_slot definitions Fabio Baltieri
2013-05-08  7:53   ` Lee Jones
2013-05-08  8:30     ` Fabio Baltieri
2013-05-08  8:47       ` Lee Jones
2013-05-08 10:58   ` Mark Brown
2013-05-08  7:14 ` [PATCH 2/6] ASoC: ux500: Do not clear state if already idle Fabio Baltieri
2013-05-08  8:04   ` Lee Jones
2013-05-08  8:39     ` [PATCH v2 " Fabio Baltieri
2013-05-08 10:34       ` Mark Brown
2013-05-08 11:04         ` Lee Jones
2013-05-08 11:31           ` Mark Brown
2013-05-08 12:03             ` Lee Jones
2013-05-08 12:39               ` Mark Brown
2013-05-08 13:05                 ` Lee Jones
2013-05-08 13:48                   ` Mark Brown
2013-05-08 14:06                     ` Lee Jones
2013-05-09  9:28                       ` Mark Brown
2013-05-08 12:04         ` Fabio Baltieri
2013-05-08 12:39           ` Mark Brown
2013-05-08  7:14 ` Fabio Baltieri [this message]
2013-05-08  8:07   ` [PATCH 3/6] ASoC: ux500: Drop pinctrl sleep support Lee Jones
2013-05-08  8:20     ` Fabio Baltieri
2013-05-08  8:48       ` Lee Jones
2013-05-08  9:00         ` Fabio Baltieri
2013-05-08 10:51   ` Mark Brown
2013-05-08 11:42     ` Fabio Baltieri
2013-05-08 12:32       ` Mark Brown
2013-05-08 13:10         ` Fabio Baltieri
2013-05-08 13:54           ` Mark Brown
2013-05-08 14:17             ` Fabio Baltieri
2013-05-08 14:27               ` Fabio Baltieri
2013-05-08 14:49                 ` Mark Brown
2013-05-08 15:07                   ` Lee Jones
2013-05-09  9:34                     ` Mark Brown
2013-05-08 14:29               ` Mark Brown
2013-05-08 15:48                 ` Fabio Baltieri
2013-05-09  9:41                   ` Mark Brown
2013-05-13 10:43                     ` Fabio Baltieri
2013-05-17 22:02                   ` Linus Walleij
2013-05-08  7:14 ` [PATCH 4/6] ASoC: ux500: Update tx tdm slots configuration Fabio Baltieri
2013-05-08  8:18   ` Lee Jones
2013-05-08 11:01   ` Mark Brown
2013-05-08 11:11     ` Lee Jones
2013-05-08 11:32       ` Fabio Baltieri
2013-05-08 12:28       ` Mark Brown
2013-05-08 16:03     ` Fabio Baltieri
2013-05-08  7:14 ` [PATCH 5/6] ASoC: ux500: Swap even/odd AD slot definitions Fabio Baltieri
2013-05-08  8:19   ` Lee Jones
2013-05-08  7:14 ` [PATCH 6/6] ASoC: ux500: Use the first two AD slots for capture Fabio Baltieri
2013-05-08  8:22   ` Lee Jones
2013-05-08 10:56   ` Mark Brown
2013-05-08 11:12     ` Lee Jones
2013-05-08 12:30       ` Mark Brown
2013-05-08 16:08     ` Fabio Baltieri

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1367997261-32048-4-git-send-email-fabio.baltieri@linaro.org \
    --to=fabio.baltieri@linaro.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ola.o.lilja@stericsson.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox