[PATCH] ASoC: sgtl5000: Fix driver probe after reset

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <fabio.estevam@freescale.com>

sgtl5000 codec does not have a reset line, nor a reset command in software.

After a 'reboot' command in Linux or after pressing the system's reset button
the sgtl5000 driver fails to probe:

sgtl5000 0-000a: Device with ID register ffff is not a sgtl5000
sgtl5000 0-000a: ASoC: failed to probe CODEC -19
imx-sgtl5000 sound.12: ASoC: failed to instantiate card -19
imx-sgtl5000 sound.12: snd_soc_register_card failed (-19)

As the sgtl5000 codec did not go through a real reset, we cannot rely on the 
reg_defaults array, since these are only valid after a clean power-on reset.

To fix this issue, use 'reg_defaults_raw' which tells the regcache driver
to actually read the codec registers and then fill the cache.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 sound/soc/codecs/sgtl5000.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 327b443..c59fae8 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1470,8 +1470,8 @@ static const struct regmap_config sgtl5000_regmap = {
 	.readable_reg = sgtl5000_readable,
 
 	.cache_type = REGCACHE_RBTREE,
-	.reg_defaults = sgtl5000_reg_defaults,
-	.num_reg_defaults = ARRAY_SIZE(sgtl5000_reg_defaults),
+	.reg_defaults_raw = sgtl5000_reg_defaults,
+	.num_reg_defaults_raw = ARRAY_SIZE(sgtl5000_reg_defaults),
 };
 
 static int sgtl5000_i2c_probe(struct i2c_client *client,
-- 
1.7.9.5