From: Mark Brown <broonie@kernel.org>
To: Max Filippov <jcmvbkbc@gmail.com>, Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org, linaro-kernel@lists.linaro.org,
Mark Brown <broonie@linaro.org>
Subject: [PATCH] ASoC: tlv320aic23: Remove spurious bits per word setting
Date: Wed, 12 Mar 2014 13:33:15 +0000 [thread overview]
Message-ID: <1394631195-10480-1-git-send-email-broonie@kernel.org> (raw)
From: Mark Brown <broonie@linaro.org>
regmap should handle any byte ordering issues required, it is looking for
a byte stream from the bus, so don't set 16 bits per word. This is likely
to have tested out OK due to use of an unmerged SPI controller driver.
Signed-off-by: Mark Brown <broonie@linaro.org>
---
sound/soc/codecs/tlv320aic23-spi.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/sound/soc/codecs/tlv320aic23-spi.c b/sound/soc/codecs/tlv320aic23-spi.c
index 585aea436c6a..3b387e41d75d 100644
--- a/sound/soc/codecs/tlv320aic23-spi.c
+++ b/sound/soc/codecs/tlv320aic23-spi.c
@@ -25,7 +25,6 @@ static int aic23_spi_probe(struct spi_device *spi)
dev_dbg(&spi->dev, "probing tlv320aic23 spi device\n");
- spi->bits_per_word = 16;
spi->mode = SPI_MODE_0;
ret = spi_setup(spi);
if (ret < 0)
--
1.9.0
next reply other threads:[~2014-03-12 13:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-12 13:33 Mark Brown [this message]
2014-03-12 17:30 ` [PATCH] ASoC: tlv320aic23: Remove spurious bits per word setting Max Filippov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394631195-10480-1-git-send-email-broonie@kernel.org \
--to=broonie@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@linaro.org \
--cc=jcmvbkbc@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linaro-kernel@lists.linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox