Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jie Yang <yang.jie@intel.com>
To: tiwai@suse.de, broonie@kernel.org
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>,
	alsa-devel@alsa-project.org, liam.r.girdwood@intel.com
Subject: [PATCH v3 1/2] ALSA: jack: create jack kcontrols for every jack input device
Date: Fri, 20 Mar 2015 23:39:12 +0800	[thread overview]
Message-ID: <1426865953-1606-2-git-send-email-yang.jie@intel.com> (raw)
In-Reply-To: <1426865953-1606-1-git-send-email-yang.jie@intel.com>

Currently the ALSA jack core registers only input devices for each jack
registered. These jack input devices are not readable by userspace devices
that run as non root.

This patch adds support for additionally registering jack kcontrol devices
for every input jack registered. This allows non root userspace to read
jack status.

Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Modified-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Jie Yang <yang.jie@intel.com>
Reveiwed-by: Mark Brown <broonie@kernel.org>
---
 include/sound/jack.h |   8 ++++
 sound/core/jack.c    | 118 ++++++++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 124 insertions(+), 2 deletions(-)

diff --git a/include/sound/jack.h b/include/sound/jack.h
index 2182350..cd5652d 100644
--- a/include/sound/jack.h
+++ b/include/sound/jack.h
@@ -73,6 +73,8 @@ enum snd_jack_types {
 
 struct snd_jack {
 	struct input_dev *input_dev;
+	struct list_head kctl_list;
+	struct snd_card *card;
 	int registered;
 	int type;
 	const char *id;
@@ -82,6 +84,12 @@ struct snd_jack {
 	void (*private_free)(struct snd_jack *);
 };
 
+struct snd_jack_kctl {
+	struct snd_kcontrol *kctl;
+	struct list_head jack_list;		/* list of controls belong to the same jack*/
+	unsigned int mask_bit;	/* the corresponding bit of the jack type */
+};
+
 #ifdef CONFIG_SND_JACK
 
 int snd_jack_new(struct snd_card *card, const char *id, int type,
diff --git a/sound/core/jack.c b/sound/core/jack.c
index 8658578..82c8316 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <sound/jack.h>
 #include <sound/core.h>
+#include <sound/control.h>
 
 static int jack_switch_types[SND_JACK_SWITCH_TYPES] = {
 	SW_HEADPHONE_INSERT,
@@ -54,7 +55,13 @@ static int snd_jack_dev_disconnect(struct snd_device *device)
 static int snd_jack_dev_free(struct snd_device *device)
 {
 	struct snd_jack *jack = device->device_data;
+	struct snd_card *card = device->card;
+	struct snd_jack_kctl *jack_kctl, *tmp_jack_kctl;
 
+	list_for_each_entry_safe(jack_kctl, tmp_jack_kctl, &jack->kctl_list, jack_list) {
+		list_del_init(&jack_kctl->jack_list);
+		snd_ctl_remove(card, jack_kctl->kctl);
+	}
 	if (jack->private_free)
 		jack->private_free(jack);
 
@@ -100,6 +107,98 @@ static int snd_jack_dev_register(struct snd_device *device)
 	return err;
 }
 
+static int jack_ctl_name_found(struct snd_card *card, const char *name, int index)
+{
+	struct snd_kcontrol *kctl;
+	int len = strlen(name);
+
+	down_read(&card->controls_rwsem);
+
+	list_for_each_entry(kctl, &card->controls, list) {
+		if (!strncmp(name, kctl->id.name, len) &&
+		    !strcmp(" Jack", kctl->id.name + len) &&
+		    kctl->id.index == index) {
+			up_read(&card->controls_rwsem);
+			return 0;
+		}
+	}
+
+	up_read(&card->controls_rwsem);
+	return 1;
+}
+
+/* get the first unused/available index number for the given kctl name */
+static int get_available_index(struct snd_card *card, const char *name)
+{
+	int idx = 0;
+
+	while (!jack_ctl_name_found(card, name, idx))
+		idx++;
+
+	return idx;
+}
+
+static void kctl_private_free(struct snd_kcontrol *kctl)
+{
+	struct snd_jack_kctl *jack_kctl = kctl->private_data;
+
+	list_del(&jack_kctl->jack_list);
+	kfree(jack_kctl);
+}
+
+static int snd_jack_new_kctl(struct snd_card *card, struct snd_jack *jack, int type)
+{
+	struct snd_kcontrol *kctl;
+	struct snd_jack_kctl *jack_kctl;
+	int i, err, index, state = 0 /* use 0 for default state ?? */;
+
+	INIT_LIST_HEAD(&jack->kctl_list);
+	for (i = 0; i < fls(SND_JACK_BTN_0); i++) {
+		int testbit = 1 << i;
+
+		/* we only new headphone kctl for headset jack */
+		if ((testbit == SND_JACK_MICROPHONE) &&
+				((type & SND_JACK_HEADSET) == SND_JACK_HEADSET))
+			continue;
+
+		/* we only new lineout kctl for avout jack */
+		if ((testbit == SND_JACK_VIDEOOUT) &&
+				((type & SND_JACK_AVOUT) == SND_JACK_AVOUT))
+			continue;
+
+		if (type & testbit) {
+			index = get_available_index(card,jack->id);
+			kctl = snd_kctl_jack_new(jack->id, index, card);
+			if (!kctl)
+				return -ENOMEM;
+
+			err = snd_ctl_add(card, kctl);
+			if (err < 0)
+				return err;
+
+			jack_kctl = kzalloc(sizeof(*jack_kctl), GFP_KERNEL);
+
+			if (!jack_kctl)
+				return -ENOMEM;
+
+			jack_kctl->kctl = kctl;
+
+			kctl->private_data = jack_kctl;
+			kctl->private_free = kctl_private_free;
+
+			/* use jack_bit_idx for the kctl type bit */
+			jack_kctl->mask_bit = testbit;
+
+			list_add_tail(&jack_kctl->jack_list, &jack->kctl_list);
+
+			/* set initial jack state */
+			snd_kctl_jack_report(card, kctl, state & testbit);
+		}
+	}
+
+	return 0;
+}
+
 /**
  * snd_jack_new - Create a new jack
  * @card:  the card instance
@@ -138,7 +237,7 @@ int snd_jack_new(struct snd_card *card, const char *id, int type,
 	}
 
 	jack->input_dev->phys = "ALSA";
-
+	jack->card = card;
 	jack->type = type;
 
 	for (i = 0; i < SND_JACK_SWITCH_TYPES; i++)
@@ -150,10 +249,17 @@ int snd_jack_new(struct snd_card *card, const char *id, int type,
 	if (err < 0)
 		goto fail_input;
 
+	/* register jack kcontrols  */
+	err = snd_jack_new_kctl(card, jack, type);
+	if (err < 0)
+		goto fail_kctl;
+
 	*jjack = jack;
 
 	return 0;
 
+fail_kctl:
+	snd_device_free(card, jack);
 fail_input:
 	input_free_device(jack->input_dev);
 	kfree(jack->id);
@@ -230,6 +336,7 @@ EXPORT_SYMBOL(snd_jack_set_key);
  */
 void snd_jack_report(struct snd_jack *jack, int status)
 {
+	struct snd_jack_kctl *jack_kctl;
 	int i;
 
 	if (!jack)
@@ -245,13 +352,20 @@ void snd_jack_report(struct snd_jack *jack, int status)
 
 	for (i = 0; i < ARRAY_SIZE(jack_switch_types); i++) {
 		int testbit = 1 << i;
-		if (jack->type & testbit)
+		if (jack->type & testbit) {
 			input_report_switch(jack->input_dev,
 					    jack_switch_types[i],
 					    status & testbit);
+		}
 	}
 
 	input_sync(jack->input_dev);
+
+	list_for_each_entry(jack_kctl, &jack->kctl_list, jack_list) {
+		snd_kctl_jack_report(jack->card, jack_kctl->kctl,
+					status & jack_kctl->mask_bit);
+	}
+
 }
 EXPORT_SYMBOL(snd_jack_report);
 
-- 
1.9.1

  reply	other threads:[~2015-03-20 15:36 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-20 15:39 [PATCH v3 0/2] ALSA: jack: Refactoring for jack kctls Jie Yang
2015-03-20 15:39 ` Jie Yang [this message]
2015-03-20 16:17   ` [PATCH v3 1/2] ALSA: jack: create jack kcontrols for every jack input device Takashi Iwai
2015-03-21  2:22     ` Jie, Yang
2015-03-21  7:46       ` Takashi Iwai
2015-03-23 10:08       ` Tanu Kaskinen
2015-03-23 11:57         ` Takashi Iwai
2015-03-23 14:57           ` Mark Brown
2015-03-25  4:11           ` Jie, Yang
2015-03-25  5:27             ` Raymond Yau
2015-03-25  6:13             ` Takashi Iwai
2015-03-20 15:39 ` [PATCH v3 2/2] ALSA: hda - Remove jack kctls Jie Yang
2015-03-20 16:21   ` Takashi Iwai
2015-03-21  0:23     ` Jie, Yang
2015-03-23  9:18 ` [PATCH v3 0/2] ALSA: jack: Refactoring for " David Henningsson
2015-03-23 15:00   ` Mark Brown
2015-03-23 15:09     ` Takashi Iwai
2015-03-23 16:35       ` Mark Brown
2015-03-23 16:38         ` Takashi Iwai
2015-03-23 16:52           ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426865953-1606-2-git-send-email-yang.jie@intel.com \
    --to=yang.jie@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=liam.r.girdwood@intel.com \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox