From: Jochen Henneberg <jh@henneberg-systemdesign.com>
To: alsa-devel <alsa-devel@alsa-project.org>
Subject: Re: bug: reconfig broken on kernel 4.5
Date: Tue, 10 May 2016 11:47:56 +0200 [thread overview]
Message-ID: <1462873676.10277.16.camel@maxwell> (raw)
In-Reply-To: <s5h4ma6b985.wl-tiwai@suse.de>
On Di, 2016-05-10 at 10:36 +0200, Takashi Iwai wrote:
> On Mon, 09 May 2016 16:11:46 +0200,
> Takashi Iwai wrote:
> >
> > On Mon, 09 May 2016 10:22:49 +0200,
> > Jochen Henneberg wrote:
> > >
> > > Hi,
> > >
> > > it looks as if 'reconfig' feature is broken since the sysfs attributes
> > > have been moved to device attributes. In hda_sysfs.c:reconfig_codec()
> > > the device is cleared with snd_hda_codec_reset() which calls
> > > snd_hdac_device_unregister() which removes the sysfs entries (including
> > > the currently in-use 'reconfig'), the re-registration fails afterwards
> > > in snd_hda_codec_build_controls().
> > > I am not sure when things got broken, but snd_hda_codec_reset()
> > > called from reconfig_codec() unregisters the device and removes the
> > > sysfs entries where in the past it only stripped all configurations
> > > (pcms, controls ...) from the device.
> >
> > Hrm, OK, something got broken indeed there. I'll check it later.
>
> Actually it's not about the sysfs, but rather the superfluous calls of
> snd_hda_codec_build_controls() & co. The fix patch is below.
>
Sorry for the confusion, I did not notice. Anyway, I have tested the
patch with 4.5, changed codec hints, reconfig and no error messages and
the changed hints have been respected after reconfig, looks good for me.
Jochen
>
> Takashi
>
> -- 8< --
> From: Takashi Iwai <tiwai@suse.de>
> Subject: [PATCH] ALSA: hda - Fix broken reconfig
>
> The HD-audio reconfig function got broken in the recent kernels,
> typically resulting in a failure like:
> snd_hda_intel 0000:00:1b.0: control 3:0:0:Playback Channel Map:0 is already present
>
> This is because of the code restructuring to move the PCM and control
> instantiation into the codec drive probe, by the commit [bcd96557bd0a:
> ALSA: hda - Build PCMs and controls at codec driver probe]. Although
> the commit above removed the calls of snd_hda_codec_build_pcms() and
> *_build_controls() at the controller driver probe, the similar calls
> in the reconfig were still left forgotten. This caused the
> conflicting and duplicated PCMs and controls.
>
> The fix is trivial: just remove these superfluous calls from
> reconfig_codec().
>
> Fixes: bcd96557bd0a ('ALSA: hda - Build PCMs and controls at codec driver probe')
> Reported-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
> Cc: <stable@vger.kernel.org> # v4.1+
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> ---
> sound/pci/hda/hda_sysfs.c | 8 --------
> 1 file changed, 8 deletions(-)
>
> diff --git a/sound/pci/hda/hda_sysfs.c b/sound/pci/hda/hda_sysfs.c
> index 64e0d1d81ca5..9739fce9e032 100644
> --- a/sound/pci/hda/hda_sysfs.c
> +++ b/sound/pci/hda/hda_sysfs.c
> @@ -141,14 +141,6 @@ static int reconfig_codec(struct hda_codec *codec)
> err = snd_hda_codec_configure(codec);
> if (err < 0)
> goto error;
> - /* rebuild PCMs */
> - err = snd_hda_codec_build_pcms(codec);
> - if (err < 0)
> - goto error;
> - /* rebuild mixers */
> - err = snd_hda_codec_build_controls(codec);
> - if (err < 0)
> - goto error;
> err = snd_card_register(codec->card);
> error:
> snd_hda_power_down(codec);
--
Henneberg - Systemdesign
Jochen Henneberg
Loehnfeld 26
21423 Winsen (Luhe)
--
Fon: +49 4174 668 773
Mobile: +49 172 160 14 69
Fax: +49 321 210 761 64
www: www.henneberg-systemdesign.com
next prev parent reply other threads:[~2016-05-10 9:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-09 8:22 bug: reconfig broken on kernel 4.5 Jochen Henneberg
2016-05-09 14:11 ` Takashi Iwai
2016-05-10 8:36 ` Takashi Iwai
2016-05-10 9:47 ` Jochen Henneberg [this message]
2016-05-10 10:15 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462873676.10277.16.camel@maxwell \
--to=jh@henneberg-systemdesign.com \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox