From: Takashi Iwai <tiwai@suse.de>
To: Jochen Henneberg <jh@henneberg-systemdesign.com>
Cc: alsa-devel <alsa-devel@alsa-project.org>
Subject: Re: bug: reconfig broken on kernel 4.5
Date: Tue, 10 May 2016 10:36:26 +0200 [thread overview]
Message-ID: <s5h4ma6b985.wl-tiwai@suse.de> (raw)
In-Reply-To: <s5hlh3jpbh9.wl-tiwai@suse.de>
On Mon, 09 May 2016 16:11:46 +0200,
Takashi Iwai wrote:
>
> On Mon, 09 May 2016 10:22:49 +0200,
> Jochen Henneberg wrote:
> >
> > Hi,
> >
> > it looks as if 'reconfig' feature is broken since the sysfs attributes
> > have been moved to device attributes. In hda_sysfs.c:reconfig_codec()
> > the device is cleared with snd_hda_codec_reset() which calls
> > snd_hdac_device_unregister() which removes the sysfs entries (including
> > the currently in-use 'reconfig'), the re-registration fails afterwards
> > in snd_hda_codec_build_controls().
> > I am not sure when things got broken, but snd_hda_codec_reset()
> > called from reconfig_codec() unregisters the device and removes the
> > sysfs entries where in the past it only stripped all configurations
> > (pcms, controls ...) from the device.
>
> Hrm, OK, something got broken indeed there. I'll check it later.
Actually it's not about the sysfs, but rather the superfluous calls of
snd_hda_codec_build_controls() & co. The fix patch is below.
Takashi
-- 8< --
From: Takashi Iwai <tiwai@suse.de>
Subject: [PATCH] ALSA: hda - Fix broken reconfig
The HD-audio reconfig function got broken in the recent kernels,
typically resulting in a failure like:
snd_hda_intel 0000:00:1b.0: control 3:0:0:Playback Channel Map:0 is already present
This is because of the code restructuring to move the PCM and control
instantiation into the codec drive probe, by the commit [bcd96557bd0a:
ALSA: hda - Build PCMs and controls at codec driver probe]. Although
the commit above removed the calls of snd_hda_codec_build_pcms() and
*_build_controls() at the controller driver probe, the similar calls
in the reconfig were still left forgotten. This caused the
conflicting and duplicated PCMs and controls.
The fix is trivial: just remove these superfluous calls from
reconfig_codec().
Fixes: bcd96557bd0a ('ALSA: hda - Build PCMs and controls at codec driver probe')
Reported-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
sound/pci/hda/hda_sysfs.c | 8 --------
1 file changed, 8 deletions(-)
diff --git a/sound/pci/hda/hda_sysfs.c b/sound/pci/hda/hda_sysfs.c
index 64e0d1d81ca5..9739fce9e032 100644
--- a/sound/pci/hda/hda_sysfs.c
+++ b/sound/pci/hda/hda_sysfs.c
@@ -141,14 +141,6 @@ static int reconfig_codec(struct hda_codec *codec)
err = snd_hda_codec_configure(codec);
if (err < 0)
goto error;
- /* rebuild PCMs */
- err = snd_hda_codec_build_pcms(codec);
- if (err < 0)
- goto error;
- /* rebuild mixers */
- err = snd_hda_codec_build_controls(codec);
- if (err < 0)
- goto error;
err = snd_card_register(codec->card);
error:
snd_hda_power_down(codec);
--
2.8.2
next prev parent reply other threads:[~2016-05-10 8:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-09 8:22 bug: reconfig broken on kernel 4.5 Jochen Henneberg
2016-05-09 14:11 ` Takashi Iwai
2016-05-10 8:36 ` Takashi Iwai [this message]
2016-05-10 9:47 ` Jochen Henneberg
2016-05-10 10:15 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5h4ma6b985.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=jh@henneberg-systemdesign.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox