From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
alsa-devel@alsa-project.org
Cc: tiwai@suse.de, broonie@kernel.org
Subject: Re: [PATCH 01/14] ASoC: Intel: boards: use devm_clk_get() unconditionally
Date: Wed, 23 Aug 2017 17:22:11 +0300 [thread overview]
Message-ID: <1503498131.25945.66.camel@linux.intel.com> (raw)
In-Reply-To: <20170822203239.19891-2-pierre-louis.bossart@linux.intel.com>
On Tue, 2017-08-22 at 15:32 -0500, Pierre-Louis Bossart wrote:
> The clock framework was only used in Baytrail, on Cherrytrail
> the firmware takes care of the MCLK/plt_clk_3.
>
> With the fix in 'commit d31fd43c0f9a
> ("clk: x86: Do not gate clocks enabled by the firmware")'
>
> the firmware-managed clocks are not impacted by enable/disable
> requests make at the driver level, and the rates are identical.
>
> Remove all checks for Baytrail and use devm_clk_get()
> unconditionally. Tested on Asus T100HA (CHT) and Asus T100TAF (BYT)
>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Pierre-Louis Bossart <pierre-
> louis.bossart@linux.intel.com>
It's a good clean up! (I believe it had been tested on CHT platforms as
well)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
P.S. Shouldn't the corresponding asm/cpu_device_id.h header, or some
other(s), be removed from inclusion as well?
> ---
> sound/soc/intel/boards/bytcr_rt5640.c | 2 +-
> sound/soc/intel/boards/cht_bsw_rt5645.c | 14 ++++++--------
> sound/soc/intel/boards/cht_bsw_rt5672.c | 26 ++++++----------------
> ----
> 3 files changed, 13 insertions(+), 29 deletions(-)
>
> diff --git a/sound/soc/intel/boards/bytcr_rt5640.c
> b/sound/soc/intel/boards/bytcr_rt5640.c
> index 4a76b09..15b1e29 100644
> --- a/sound/soc/intel/boards/bytcr_rt5640.c
> +++ b/sound/soc/intel/boards/bytcr_rt5640.c
> @@ -891,7 +891,7 @@ static int snd_byt_rt5640_mc_probe(struct
> platform_device *pdev)
> byt_rt5640_cpu_dai_name;
> }
>
> - if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) &&
> (is_valleyview())) {
> + if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) {
> priv->mclk = devm_clk_get(&pdev->dev,
> "pmc_plt_clk_3");
> if (IS_ERR(priv->mclk)) {
> ret_val = PTR_ERR(priv->mclk);
> diff --git a/sound/soc/intel/boards/cht_bsw_rt5645.c
> b/sound/soc/intel/boards/cht_bsw_rt5645.c
> index 5bcde01..d553e2b 100644
> --- a/sound/soc/intel/boards/cht_bsw_rt5645.c
> +++ b/sound/soc/intel/boards/cht_bsw_rt5645.c
> @@ -682,14 +682,12 @@ static int snd_cht_mc_probe(struct
> platform_device *pdev)
> cht_rt5645_cpu_dai_name;
> }
>
> - if (is_valleyview()) {
> - drv->mclk = devm_clk_get(&pdev->dev,
> "pmc_plt_clk_3");
> - if (IS_ERR(drv->mclk)) {
> - dev_err(&pdev->dev,
> - "Failed to get MCLK from
> pmc_plt_clk_3: %ld\n",
> - PTR_ERR(drv->mclk));
> - return PTR_ERR(drv->mclk);
> - }
> + drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
> + if (IS_ERR(drv->mclk)) {
> + dev_err(&pdev->dev,
> + "Failed to get MCLK from pmc_plt_clk_3:
> %ld\n",
> + PTR_ERR(drv->mclk));
> + return PTR_ERR(drv->mclk);
> }
>
> snd_soc_card_set_drvdata(card, drv);
> diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c
> b/sound/soc/intel/boards/cht_bsw_rt5672.c
> index f597d55..ad2f27e 100644
> --- a/sound/soc/intel/boards/cht_bsw_rt5672.c
> +++ b/sound/soc/intel/boards/cht_bsw_rt5672.c
> @@ -394,18 +394,6 @@ static struct snd_soc_card snd_soc_card_cht = {
> .resume_post = cht_resume_post,
> };
>
> -static bool is_valleyview(void)
> -{
> - static const struct x86_cpu_id cpu_ids[] = {
> - { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail
> */
> - {}
> - };
> -
> - if (!x86_match_cpu(cpu_ids))
> - return false;
> - return true;
> -}
> -
> #define RT5672_I2C_DEFAULT "i2c-10EC5670:00"
>
> static int snd_cht_mc_probe(struct platform_device *pdev)
> @@ -439,14 +427,12 @@ static int snd_cht_mc_probe(struct
> platform_device *pdev)
> }
> }
>
> - if (is_valleyview()) {
> - drv->mclk = devm_clk_get(&pdev->dev,
> "pmc_plt_clk_3");
> - if (IS_ERR(drv->mclk)) {
> - dev_err(&pdev->dev,
> - "Failed to get MCLK from
> pmc_plt_clk_3: %ld\n",
> - PTR_ERR(drv->mclk));
> - return PTR_ERR(drv->mclk);
> - }
> + drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
> + if (IS_ERR(drv->mclk)) {
> + dev_err(&pdev->dev,
> + "Failed to get MCLK from pmc_plt_clk_3:
> %ld\n",
> + PTR_ERR(drv->mclk));
> + return PTR_ERR(drv->mclk);
> }
> snd_soc_card_set_drvdata(&snd_soc_card_cht, drv);
>
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2017-08-23 14:23 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-22 20:32 [PATCH 00/14] BYT/CHT codec/machine drivers update Pierre-Louis Bossart
2017-08-22 20:32 ` [PATCH 01/14] ASoC: Intel: boards: use devm_clk_get() unconditionally Pierre-Louis Bossart
2017-08-23 14:22 ` Andy Shevchenko [this message]
2017-08-22 20:32 ` [PATCH 02/14] ASoC: intel: cht_bsw_max98090: add support for clock framework Pierre-Louis Bossart
2017-08-22 20:32 ` [PATCH 03/14] ASoC: Intel: cht_bsw_max98090: Fix I2S config + unused code Pierre-Louis Bossart
2017-09-19 13:45 ` Applied "ASoC: Intel: cht_bsw_max98090: Fix I2S config + unused code" to the asoc tree Mark Brown
2017-08-22 20:32 ` [PATCH 04/14] ASoc: cht_bsw_max98090_ti: Fix jack initialization Pierre-Louis Bossart
2017-08-22 20:32 ` [PATCH 05/14] ASoC: ts3a227e: add acpi table Pierre-Louis Bossart
2017-08-23 11:19 ` Mark Brown
2017-08-22 20:32 ` [PATCH 06/14] ASoC: Intel: atom: add support for Baytrail Chromebooks Pierre-Louis Bossart
2017-09-19 13:45 ` Applied "ASoC: Intel: atom: use cht_bsw_max98090 for Baytrail Chromebooks" to the asoc tree Mark Brown
2017-08-22 20:32 ` [PATCH 07/14] ASoC: Intel: bytcr-rt5651: fix capture routes Pierre-Louis Bossart
2017-09-19 13:46 ` Applied "ASoC: Intel: bytcr-rt5651: fix capture routes" to the asoc tree Mark Brown
2017-08-22 20:32 ` [PATCH 08/14] ASoC: Intel: bytcr_rt5651: add MCLK support Pierre-Louis Bossart
2017-08-22 20:32 ` [PATCH 09/14] ASoC: Intel: bytcr_rt5651: filter codec name Pierre-Louis Bossart
2017-08-22 20:32 ` [PATCH 10/14] ASoC: codecs: rt5645: add quirks for Asus T100HA Pierre-Louis Bossart
2017-08-23 11:24 ` Applied "ASoC: codecs: rt5645: add quirks for Asus T100HA" to the asoc tree Mark Brown
2017-08-22 20:32 ` [PATCH 11/14] ASoC: Intel: bytcr_rt5640: simplify MCLK quirk tests Pierre-Louis Bossart
2017-09-19 13:45 ` Applied "ASoC: Intel: bytcr_rt5640: simplify MCLK quirk tests" to the asoc tree Mark Brown
2017-08-22 20:32 ` [PATCH 12/14] ASoC: codecs: rt5670: add jack detection quirk for Dell Venue 5585 Pierre-Louis Bossart
2017-08-23 11:24 ` Applied "ASoC: codecs: rt5670: add jack detection quirk for Dell Venue 5585" to the asoc tree Mark Brown
2017-08-22 20:32 ` [PATCH 13/14] ASoC: Intel: cht_bsw_rt5672: use actual HID in suspend/resume Pierre-Louis Bossart
2017-09-25 16:16 ` Applied "ASoC: Intel: cht_bsw_rt5672: use actual HID in suspend/resume" to the asoc tree Mark Brown
2017-08-22 20:32 ` [PATCH 14/14] ASoC: Intel: cht_bsw_rt5672: fix card name Pierre-Louis Bossart
2017-09-25 16:16 ` Applied "ASoC: Intel: cht_bsw_rt5672: fix card name" to the asoc tree Mark Brown
2017-08-28 11:38 ` [PATCH 00/14] BYT/CHT codec/machine drivers update Pierre-Louis Bossart
2017-08-29 18:34 ` Mark Brown
2017-08-29 18:51 ` Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1503498131.25945.66.camel@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox