Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	alsa-devel@alsa-project.org
Cc: tiwai@suse.de, vinod.koul@intel.com, broonie@kernel.org,
	jeremy@jcline.org, liam.r.girdwood@linux.intel.com
Subject: Re: [PATCH 3/3] ASoC: Intel: bytcht_es8316: fix HID handling
Date: Thu, 04 Jan 2018 16:57:28 +0200	[thread overview]
Message-ID: <1515077848.7000.676.camel@linux.intel.com> (raw)
In-Reply-To: <20180103170242.5363-4-pierre-louis.bossart@linux.intel.com>

On Wed, 2018-01-03 at 11:02 -0600, Pierre-Louis Bossart wrote:
> Same problem as with previous machine drivers, the codec dai
> uses a hard-coded name of "i2c-ESSX8316:00" but ACPI provides
> "i2c-ESSX8316:01" in some systems.

Yeah, that's why using device instances is fragile...

> 
> Fix by overriding the hard-coded value with the codec name derived
> from the HID information

The patch makes me think about introducing acpi_dev_get_dev_name() and
utilize it here since I need something similar to have in one of GPIO
drivers.

> 
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189261
> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.
> com>
> ---
>  sound/soc/intel/boards/Kconfig         |  1 +
>  sound/soc/intel/boards/bytcht_es8316.c | 26
> +++++++++++++++++++++++++-
>  2 files changed, 26 insertions(+), 1 deletion(-)
> 
> diff --git a/sound/soc/intel/boards/Kconfig
> b/sound/soc/intel/boards/Kconfig
> index 89a73e3d9d2d..4af2393160bf 100644
> --- a/sound/soc/intel/boards/Kconfig
> +++ b/sound/soc/intel/boards/Kconfig
> @@ -153,6 +153,7 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
>  config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
>  	tristate "Baytrail & Cherrytrail with ES8316 codec"
>  	depends on X86_INTEL_LPSS && I2C && ACPI
> +	select SND_SOC_ACPI
>  	select SND_SOC_ES8316
>  	help
>  	  This adds support for ASoC machine driver for Intel(R)
> Baytrail &
> diff --git a/sound/soc/intel/boards/bytcht_es8316.c
> b/sound/soc/intel/boards/bytcht_es8316.c
> index 8088396717e3..ae24f6205f05 100644
> --- a/sound/soc/intel/boards/bytcht_es8316.c
> +++ b/sound/soc/intel/boards/bytcht_es8316.c
> @@ -232,15 +232,39 @@ static struct snd_soc_card byt_cht_es8316_card =
> {
>  	.fully_routed = true,
>  };
>  
> +static char codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */
> +

I would rather do use 4 + ACPI_ID_LEN + 3 /* or 1 + 2 */ + 1 and explain
each part in the comment above.

>  static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
>  {
> -	int ret = 0;
>  	struct byt_cht_es8316_private *priv;
> +	struct snd_soc_acpi_mach *mach;
> +	const char *i2c_name = NULL;
> +	int dai_index = 0;
> +	int i;
> +	int ret = 0;
>  
>  	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC);
>  	if (!priv)
>  		return -ENOMEM;
>  
> +	mach = (&pdev->dev)->platform_data;
> +	/* fix index of codec dai */
> +	for (i = 0; i < ARRAY_SIZE(byt_cht_es8316_dais); i++) {
> +		if (!strcmp(byt_cht_es8316_dais[i].codec_name,
> +			    "i2c-ESSX8316:00")) {
> +			dai_index = i;
> +			break;
> +		}

Perhaps at some point you can do such in more generic (across Intel
ASoCs) ?

> +	}
> +
> +	/* fixup codec name based on HID */
> +	i2c_name = snd_soc_acpi_find_name_from_hid(mach->id);
> +	if (i2c_name) {
> +		snprintf(codec_name, sizeof(codec_name),
> +			"%s%s", "i2c-", i2c_name);
> +		byt_cht_es8316_dais[dai_index].codec_name =
> codec_name;
> +	}
> +
>  	/* register the soc card */
>  	byt_cht_es8316_card.dev = &pdev->dev;
>  	snd_soc_card_set_drvdata(&byt_cht_es8316_card, priv);

-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

  reply	other threads:[~2018-01-04 15:00 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-03 17:02 [PATCH 0/3] ASoC: Intel: ACPI-related fixes Pierre-Louis Bossart
2018-01-03 17:02 ` [PATCH 1/3] [PATCH] ASoC: acpi: fix machine driver selection based on quirk Pierre-Louis Bossart
2018-01-04 13:08   ` Andy Shevchenko
2018-01-04 15:18     ` Pierre-Louis Bossart
2018-01-05  0:58       ` Pierre-Louis Bossart
2018-01-03 17:02 ` [PATCH 2/3] ASoC: Replace snd_soc_acpi_check_hid with acpi_dev_present Pierre-Louis Bossart
2018-01-04 13:09   ` Andy Shevchenko
2018-01-03 17:02 ` [PATCH 3/3] ASoC: Intel: bytcht_es8316: fix HID handling Pierre-Louis Bossart
2018-01-04 14:57   ` Andy Shevchenko [this message]
2018-01-04 15:24     ` Pierre-Louis Bossart
2018-01-04 16:00       ` Andy Shevchenko
2018-01-04 17:06         ` Pierre-Louis Bossart
2018-01-04 17:13           ` Andy Shevchenko
2018-01-12 21:09   ` Applied "ASoC: Intel: bytcht_es8316: fix HID handling" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1515077848.7000.676.camel@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=jeremy@jcline.org \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=tiwai@suse.de \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox