envy24control word clock error

envy24control word clock error

[John Rigg]

When I start envy24control from xterm I get an endless stream of
"Unable to determine wordclock status: No such file or directory" and
"Unable to read word clock sync selection: No such file or directory" error
messages.
These don't stop until I shut down envy24control. The same occurs regardless
of what clock source I set in the GUI, or whether I link my two Delta1010s 
with SPDIF or wordclock in/out. It's the same with -c0, -c1 or both launched
from separate xterms.
The messages appear to come from master_clock_status_timeout_callback()
in envy24control/hardware.c (lines 160-175).

This is with alsa-tools-1.0.10 (also happens with rc2), alsa-lib-1.0.10,
kernel 2.6.14-rt20 x86_64 SMP (alsa 1.0.10rc1 drivers).
Anyone got any ideas?

John


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click

Re: envy24control word clock error

[Eric Shattow]

On 11/27/05, John Rigg <ad@sound-man.co.uk> wrote:
> When I start envy24control from xterm I get an endless stream of
> "Unable to determine wordclock status: No such file or directory" and
> "Unable to read word clock sync selection: No such file or directory" error
> messages.
> These don't stop until I shut down envy24control. The same occurs regardless
> of what clock source I set in the GUI, or whether I link my two Delta1010s
> with SPDIF or wordclock in/out. It's the same with -c0, -c1 or both launched
> from separate xterms.
> The messages appear to come from master_clock_status_timeout_callback()
> in envy24control/hardware.c (lines 160-175).
>
> This is with alsa-tools-1.0.10 (also happens with rc2), alsa-lib-1.0.10,
> kernel 2.6.14-rt20 x86_64 SMP (alsa 1.0.10rc1 drivers).
> Anyone got any ideas?
>
> John
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
> for problems?  Stop!  Download the new AJAX search engine that makes
> searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
> http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
>

No ideas, however I will confirm this is also happening in my Delta
1010 setup / amd64 hardware.  Driver is 1.0.10rc3, Debian "etch"
GNU/Linux OS, 2.6.14 kernel. The envy24control progam spits out an
endless stream of the same wordclock error messages.

 Eric


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id\x16865&op=click

Re: envy24control word clock error

[Pasi Kärkkäinen]

On Mon, Nov 28, 2005 at 01:26:36AM -0600, Eric Shattow wrote:
> On 11/27/05, John Rigg <ad@sound-man.co.uk> wrote:
> > When I start envy24control from xterm I get an endless stream of
> > "Unable to determine wordclock status: No such file or directory" and
> > "Unable to read word clock sync selection: No such file or directory" error
> > messages.
> > These don't stop until I shut down envy24control. The same occurs regardless
> > of what clock source I set in the GUI, or whether I link my two Delta1010s
> > with SPDIF or wordclock in/out. It's the same with -c0, -c1 or both launched
> > from separate xterms.
> > The messages appear to come from master_clock_status_timeout_callback()
> > in envy24control/hardware.c (lines 160-175).
> >
> > This is with alsa-tools-1.0.10 (also happens with rc2), alsa-lib-1.0.10,
> > kernel 2.6.14-rt20 x86_64 SMP (alsa 1.0.10rc1 drivers).
> > Anyone got any ideas?
> >
> > John
> >
> No ideas, however I will confirm this is also happening in my Delta
> 1010 setup / amd64 hardware.  Driver is 1.0.10rc3, Debian "etch"
> GNU/Linux OS, 2.6.14 kernel. The envy24control progam spits out an
> endless stream of the same wordclock error messages.
> 

I'm also having the same problem. I'm running Debian sid (unstable), with
2.6.14-2-686-smp kernel.

Is this Debian specific problem?

>  Eric
> 
> 

-- Pasi Kärkkäinen
       
                                   ^
                                .     .
                                 Linux
                              /    -    \
                             Choice.of.the
                           .Next.Generation.


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id\x16865&op=click

Re: envy24control word clock error

[Takashi Iwai]

[-- Attachment #1: Type: text/plain, Size: 858 bytes --]

At Sun, 27 Nov 2005 19:24:50 +0000,
John Rigg wrote:
> 
> When I start envy24control from xterm I get an endless stream of
> "Unable to determine wordclock status: No such file or directory" and
> "Unable to read word clock sync selection: No such file or directory" error
> messages.
> These don't stop until I shut down envy24control. The same occurs regardless
> of what clock source I set in the GUI, or whether I link my two Delta1010s 
> with SPDIF or wordclock in/out. It's the same with -c0, -c1 or both launched
> from separate xterms.
> The messages appear to come from master_clock_status_timeout_callback()
> in envy24control/hardware.c (lines 160-175).
> 
> This is with alsa-tools-1.0.10 (also happens with rc2), alsa-lib-1.0.10,
> kernel 2.6.14-rt20 x86_64 SMP (alsa 1.0.10rc1 drivers).
> Anyone got any ideas?

Try the patch below.


Takashi

[-- Attachment #2: Type: text/plain, Size: 1718 bytes --]

Index: alsa-tools/envy24control/hardware.c
===================================================================
RCS file: /home/iwai/cvs/alsa/alsa-tools/envy24control/hardware.c,v
retrieving revision 1.13
diff -u -r1.13 hardware.c
--- alsa-tools/envy24control/hardware.c	25 Nov 2005 11:50:20 -0000	1.13
+++ alsa-tools/envy24control/hardware.c	28 Nov 2005 17:26:42 -0000
@@ -165,7 +165,7 @@
 	if (card_eeprom.subvendor != ICE1712_SUBDEVICE_DELTA1010)
 		return FALSE;
 	snd_ctl_elem_value_alloca(&sw);
-	snd_ctl_elem_value_set_interface(sw, SND_CTL_ELEM_IFACE_PCM);
+	snd_ctl_elem_value_set_interface(sw, SND_CTL_ELEM_IFACE_MIXER);
 	snd_ctl_elem_value_set_name(sw, "Word Clock Status");
 	if ((err = snd_ctl_elem_read(ctl, sw)) < 0)
 		g_print("Unable to determine word clock status: %s\n", snd_strerror(err));
@@ -795,7 +795,7 @@
 	snd_ctl_elem_value_set_interface(internal_clock_default, SND_CTL_ELEM_IFACE_MIXER);
 	snd_ctl_elem_value_set_name(internal_clock_default, "Multi Track Internal Clock Default");
 
-	snd_ctl_elem_value_set_interface(word_clock_sync, SND_CTL_ELEM_IFACE_PCM);
+	snd_ctl_elem_value_set_interface(word_clock_sync, SND_CTL_ELEM_IFACE_MIXER);
 	snd_ctl_elem_value_set_name(word_clock_sync, "Word Clock Sync");
 
 	snd_ctl_elem_value_set_interface(rate_locking, SND_CTL_ELEM_IFACE_MIXER);
@@ -811,7 +811,7 @@
 		snd_ctl_elem_value_set_interface(spdif_input, SND_CTL_ELEM_IFACE_MIXER);
 		snd_ctl_elem_value_set_name(spdif_input, "Optical Digital Input Switch");
 	} else {
-	snd_ctl_elem_value_set_interface(spdif_input, SND_CTL_ELEM_IFACE_PCM);
+	snd_ctl_elem_value_set_interface(spdif_input, SND_CTL_ELEM_IFACE_MIXER);
 	snd_ctl_elem_value_set_name(spdif_input, "IEC958 Input Optical");
 	}
 

Re: envy24control word clock error

[Pasi Kärkkäinen]

On Mon, Nov 28, 2005 at 06:27:42PM +0100, Takashi Iwai wrote:
> At Sun, 27 Nov 2005 19:24:50 +0000,
> John Rigg wrote:
> > 
> > When I start envy24control from xterm I get an endless stream of
> > "Unable to determine wordclock status: No such file or directory" and
> > "Unable to read word clock sync selection: No such file or directory" error
> > messages.
> > These don't stop until I shut down envy24control. The same occurs regardless
> > of what clock source I set in the GUI, or whether I link my two Delta1010s 
> > with SPDIF or wordclock in/out. It's the same with -c0, -c1 or both launched
> > from separate xterms.
> > The messages appear to come from master_clock_status_timeout_callback()
> > in envy24control/hardware.c (lines 160-175).
> > 
> > This is with alsa-tools-1.0.10 (also happens with rc2), alsa-lib-1.0.10,
> > kernel 2.6.14-rt20 x86_64 SMP (alsa 1.0.10rc1 drivers).
> > Anyone got any ideas?
> 
> Try the patch below.
>

That patch fixes the problem for me! (Debian sid/unstable, 
alsa-tools-gui 1.0.10-1)

- Pasi Kärkkäinen
 
> 
> Takashi

> Index: alsa-tools/envy24control/hardware.c
> ===================================================================
> RCS file: /home/iwai/cvs/alsa/alsa-tools/envy24control/hardware.c,v
> retrieving revision 1.13
> diff -u -r1.13 hardware.c
> --- alsa-tools/envy24control/hardware.c	25 Nov 2005 11:50:20 -0000	1.13
> +++ alsa-tools/envy24control/hardware.c	28 Nov 2005 17:26:42 -0000
> @@ -165,7 +165,7 @@
>  	if (card_eeprom.subvendor != ICE1712_SUBDEVICE_DELTA1010)
>  		return FALSE;
>  	snd_ctl_elem_value_alloca(&sw);
> -	snd_ctl_elem_value_set_interface(sw, SND_CTL_ELEM_IFACE_PCM);
> +	snd_ctl_elem_value_set_interface(sw, SND_CTL_ELEM_IFACE_MIXER);
>  	snd_ctl_elem_value_set_name(sw, "Word Clock Status");
>  	if ((err = snd_ctl_elem_read(ctl, sw)) < 0)
>  		g_print("Unable to determine word clock status: %s\n", snd_strerror(err));
> @@ -795,7 +795,7 @@
>  	snd_ctl_elem_value_set_interface(internal_clock_default, SND_CTL_ELEM_IFACE_MIXER);
>  	snd_ctl_elem_value_set_name(internal_clock_default, "Multi Track Internal Clock Default");
>  
> -	snd_ctl_elem_value_set_interface(word_clock_sync, SND_CTL_ELEM_IFACE_PCM);
> +	snd_ctl_elem_value_set_interface(word_clock_sync, SND_CTL_ELEM_IFACE_MIXER);
>  	snd_ctl_elem_value_set_name(word_clock_sync, "Word Clock Sync");
>  
>  	snd_ctl_elem_value_set_interface(rate_locking, SND_CTL_ELEM_IFACE_MIXER);
> @@ -811,7 +811,7 @@
>  		snd_ctl_elem_value_set_interface(spdif_input, SND_CTL_ELEM_IFACE_MIXER);
>  		snd_ctl_elem_value_set_name(spdif_input, "Optical Digital Input Switch");
>  	} else {
> -	snd_ctl_elem_value_set_interface(spdif_input, SND_CTL_ELEM_IFACE_PCM);
> +	snd_ctl_elem_value_set_interface(spdif_input, SND_CTL_ELEM_IFACE_MIXER);
>  	snd_ctl_elem_value_set_name(spdif_input, "IEC958 Input Optical");
>  	}
>  


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id\x16865&op=click

Re: envy24control word clock error

[Takashi Iwai]

At Mon, 28 Nov 2005 20:05:00 +0200,
Pasi Kärkkäinen wrote:
> 
> On Mon, Nov 28, 2005 at 06:27:42PM +0100, Takashi Iwai wrote:
> > At Sun, 27 Nov 2005 19:24:50 +0000,
> > John Rigg wrote:
> > > 
> > > When I start envy24control from xterm I get an endless stream of
> > > "Unable to determine wordclock status: No such file or directory" and
> > > "Unable to read word clock sync selection: No such file or directory" error
> > > messages.
> > > These don't stop until I shut down envy24control. The same occurs regardless
> > > of what clock source I set in the GUI, or whether I link my two Delta1010s 
> > > with SPDIF or wordclock in/out. It's the same with -c0, -c1 or both launched
> > > from separate xterms.
> > > The messages appear to come from master_clock_status_timeout_callback()
> > > in envy24control/hardware.c (lines 160-175).
> > > 
> > > This is with alsa-tools-1.0.10 (also happens with rc2), alsa-lib-1.0.10,
> > > kernel 2.6.14-rt20 x86_64 SMP (alsa 1.0.10rc1 drivers).
> > > Anyone got any ideas?
> > 
> > Try the patch below.
> >
> 
> That patch fixes the problem for me! (Debian sid/unstable, 
> alsa-tools-gui 1.0.10-1)

Thanks for confirmation.  I applied it to CVS, too.


Takashi


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id\x16865&op=click

Re: envy24control word clock error

[John Rigg]

On Mon, Nov 28, 2005 at 07:16:04PM +0100, Takashi Iwai wrote:
> At Mon, 28 Nov 2005 20:05:00 +0200,
> Pasi Kärkkäinen wrote:
> > 
> > On Mon, Nov 28, 2005 at 06:27:42PM +0100, Takashi Iwai wrote:
> > > At Sun, 27 Nov 2005 19:24:50 +0000,
> > > John Rigg wrote:
> > > > 
> > > > When I start envy24control from xterm I get an endless stream of
> > > > "Unable to determine wordclock status: No such file or directory" and
> > > > "Unable to read word clock sync selection: No such file or directory" error
> > > > messages.
> > > 
> > > Try the patch below.
> > 
> > That patch fixes the problem for me! (Debian sid/unstable, 
> > alsa-tools-gui 1.0.10-1)
> 
> Thanks for confirmation.  I applied it to CVS, too.
> 
> 
> Takashi

Just for further confirmation, it works here too. Now I can sync word
clocks :)

Thanks,
John


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click