From: Lennart Poettering <mznyfn@0pointer.de>
To: James Courtier-Dutton <James@superbug.co.uk>
Cc: Florian Faber <faber@faberman.de>, alsa-devel@alsa-project.org
Subject: Re: What does 0dB refer to? (Logitech USB Speakers)
Date: Mon, 14 Apr 2008 18:56:32 +0200 [thread overview]
Message-ID: <20080414165632.GF22115@tango.0pointer.de> (raw)
In-Reply-To: <48012FD7.6050904@superbug.co.uk>
On Sat, 12.04.08 22:55, James Courtier-Dutton (James@superbug.co.uk) wrote:
> > That would be reasonable for consumer cards. Pro sound cards should
> > never initialise themselves to anything other than minimum gain.
> >
> > John
> >
>
> I think everyone is misunderstanding the issue here.
> All ALSA sound cards, without any intervention from user space, will
> boot up with ALL SOUND MUTED.
> Most distros then have an /etc/init.d startup script that restores sound
> card levels to the previous state before the previous power off.
> The problem is, what to do the first time the system is installed. I.e.
> No "previous state" exists.
> a) General users will normally want some level of sound by default the
> first time they boot into a newly installed system.
> b) Professional users want everything muted the first time.
>
> My personal preference is ALL SOUND MUTED in ALL cases.
> I figure that if a user does not have sound, the first thing they will
> do is go to the volume control and turn it up!
Thing is, that non-technical people usually have a very hard time to
grok a mixer crowded with all kinds of controls where most of them
actually don't have any impact on sound at all.
In PA I try to minimize the number of sliders: just one per output
device. PA is clearly not for pro-audio people, so this is the
absolute right thing to do. But for this I need to be able to
rely on that all the mixer controls of the soundcard are initialized
in a "sane" way, so that the single mixer control I have actually
makes sense.
> Most consumer distos do not agree with me and want the volume turned up
> already by default.
Yes. in an ideal world people wouldn't have to think about the volume
control in there computers at all, since their speakers either come
with a hw vol control anyway, are a hifi stereo with hw vol controls
or are inside a laptop with hw volume controls.
Lennart
--
Lennart Poettering Red Hat, Inc.
lennart [at] poettering [dot] net ICQ# 11060553
http://0pointer.net/lennart/ GnuPG 0x1A015CC4
next prev parent reply other threads:[~2008-04-14 16:56 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-11 20:46 What does 0dB refer to? (Logitech USB Speakers) Lennart Poettering
2008-04-12 0:09 ` Mark Brown
2008-04-12 7:27 ` John Rigg
2008-04-12 11:15 ` James Courtier-Dutton
2008-04-12 12:01 ` John Rigg
2008-04-12 13:16 ` Lennart Poettering
2008-04-12 13:35 ` Lennart Poettering
2008-04-12 18:14 ` James Courtier-Dutton
2008-04-12 18:25 ` Florian Faber
2008-04-12 19:26 ` James Courtier-Dutton
2008-04-12 19:34 ` James Courtier-Dutton
2008-04-12 19:37 ` Rene Herman
2008-04-14 16:48 ` Lennart Poettering
2008-04-14 17:00 ` Rene Herman
2008-04-14 17:24 ` Lennart Poettering
2008-04-14 22:47 ` Rene Herman
2008-04-14 23:57 ` Lennart Poettering
2008-04-15 1:04 ` Rene Herman
2008-04-15 4:09 ` Florian Faber
2008-04-15 17:02 ` Rene Herman
2008-04-12 21:41 ` John Rigg
2008-04-12 21:55 ` James Courtier-Dutton
2008-04-12 22:09 ` Rene Herman
2008-04-12 22:23 ` Rene Herman
2008-04-14 16:58 ` Lennart Poettering
2008-04-14 17:28 ` Rene Herman
2008-04-12 22:43 ` John Rigg
2008-04-13 12:36 ` Alexander E. Patrakov
2008-04-14 16:56 ` Lennart Poettering [this message]
2008-04-14 16:50 ` Lennart Poettering
2008-04-15 15:03 ` Wolfgang Woehl
2008-04-12 21:14 ` John Rigg
2008-04-12 21:54 ` stan
2008-04-12 23:00 ` John Rigg
2008-04-12 23:24 ` Lee Revell
2008-04-13 10:51 ` James Courtier-Dutton
2008-04-13 11:26 ` Florian Faber
2008-04-13 12:09 ` James Courtier-Dutton
2008-04-13 11:52 ` Rene Herman
2008-04-13 15:17 ` stan
2008-04-13 16:28 ` Rene Herman
2008-04-14 16:40 ` Lennart Poettering
2008-04-12 19:32 ` Rene Herman
2008-04-12 21:16 ` Rene Herman
2008-04-13 17:48 ` Mark Brown
2008-04-14 17:00 ` Lennart Poettering
2008-04-14 17:22 ` Rene Herman
2008-04-14 17:28 ` Lennart Poettering
2008-04-14 21:07 ` James Courtier-Dutton
2008-04-14 22:08 ` Aldrin Martoq
2008-04-14 23:43 ` Lennart Poettering
2008-04-14 23:54 ` Lee Revell
2008-04-15 2:18 ` Aldrin Martoq
2008-04-15 3:52 ` Florian Faber
2008-04-15 12:32 ` John Rigg
2008-04-15 13:12 ` John Rigg
2008-04-15 14:33 ` Rene Herman
2008-04-16 14:29 ` Rene Herman
2008-04-16 15:19 ` Rene Herman
2008-04-16 15:37 ` Rene Herman
2008-04-17 20:39 ` James Courtier-Dutton
2008-04-17 21:30 ` Rene Herman
2008-06-09 23:37 ` Rene Herman
2008-04-15 14:43 ` James Courtier-Dutton
2008-04-15 16:55 ` John Rigg
2008-04-15 15:42 ` Wolfgang Woehl
2008-04-15 15:51 ` Rene Herman
2008-04-15 16:41 ` John Rigg
2008-04-15 17:14 ` Wolfgang Woehl
2008-04-15 17:50 ` John Rigg
2008-04-20 1:01 ` Lennart Poettering
2008-04-20 15:23 ` stan
2008-04-21 3:20 ` Alexander E. Patrakov
2008-04-21 13:43 ` Takashi Iwai
2008-04-21 15:25 ` Rene Herman
2008-04-21 16:01 ` Jaroslav Kysela
2008-04-21 16:06 ` Takashi Iwai
2008-04-21 16:09 ` Jaroslav Kysela
2008-04-21 16:17 ` Takashi Iwai
2008-04-15 10:17 ` Takashi Iwai
2008-04-20 0:00 ` Lennart Poettering
2008-04-21 13:32 ` Takashi Iwai
2008-04-21 17:10 ` Rene Herman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080414165632.GF22115@tango.0pointer.de \
--to=mznyfn@0pointer.de \
--cc=James@superbug.co.uk \
--cc=alsa-devel@alsa-project.org \
--cc=faber@faberman.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox