From: John Rigg <aldev@sound-man.co.uk>
To: James Courtier-Dutton <James@superbug.co.uk>
Cc: alsa-devel@alsa-project.org
Subject: Re: What does 0dB refer to? (Logitech USB Speakers)
Date: Tue, 15 Apr 2008 17:55:59 +0100 [thread overview]
Message-ID: <20080415165559.GB3393@localhost> (raw)
In-Reply-To: <4804BF12.9050100@superbug.co.uk>
On Tue, Apr 15, 2008 at 03:43:30PM +0100, James Courtier-Dutton wrote:
> John Rigg wrote:
> >>On Monday 14 April 2008 23:07:22 James Courtier-Dutton wrote:
> >>
> >>>The aim of the dB values in the ALSA mixer is this.
> >>>
> >>>For Playback:
> >>>Set all the mixer controls to 0dB.
> >>>Send a sample digital signal from the CPU to the sound card.
> >>>The measured analog signal on the line-out should be the same for ALL
> >>>sound cards.
> >>>
> >
> >The dB setting in a mixer refers to gain, not level.
> >Expecting the same absolute level from pro and consumer
> >sound cards at the same gain setting is a little ridiculous.
> >If I set a control at 0dB I want just that: 0dB gain.
> >
> >John
> >
> But surely it is a bit more than that.
> If I work with Pro gear and I capture some sound via line-in.
> I then send the digital sound file produced to another person who also
> has pro gear.
> When they output that digital sound file to their line-out, it should be
> identical, level wise, to the captured line-in was so long as both
> people have the same dB gain levels set.
> In this case, we would need some way to convert Volts from the line-in
> to specific digital samples in the sound file.
> I have not been able to find out what this conversion should be.
> E.g. a 16bit signed digital sample with value +5000 equals X Volts
> output from line-out.
> What is that X value?
In pro gear, levels are referenced to digital full scale in the A-D
and D-A converters. The actual analogue signal voltage level that
corresponds to this varies between interfaces. In most pro converters,
full scale corresponds to about +20dBu (about 11 volts peak)
but there is some variation (+/- 2 or 3dB) between manufacturers.
I'd expect the line in and line out levels on a consumer
sound card to be much lower than this, so obviously the same
standard can not be applied to both.
John
next prev parent reply other threads:[~2008-04-15 16:46 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-11 20:46 What does 0dB refer to? (Logitech USB Speakers) Lennart Poettering
2008-04-12 0:09 ` Mark Brown
2008-04-12 7:27 ` John Rigg
2008-04-12 11:15 ` James Courtier-Dutton
2008-04-12 12:01 ` John Rigg
2008-04-12 13:16 ` Lennart Poettering
2008-04-12 13:35 ` Lennart Poettering
2008-04-12 18:14 ` James Courtier-Dutton
2008-04-12 18:25 ` Florian Faber
2008-04-12 19:26 ` James Courtier-Dutton
2008-04-12 19:34 ` James Courtier-Dutton
2008-04-12 19:37 ` Rene Herman
2008-04-14 16:48 ` Lennart Poettering
2008-04-14 17:00 ` Rene Herman
2008-04-14 17:24 ` Lennart Poettering
2008-04-14 22:47 ` Rene Herman
2008-04-14 23:57 ` Lennart Poettering
2008-04-15 1:04 ` Rene Herman
2008-04-15 4:09 ` Florian Faber
2008-04-15 17:02 ` Rene Herman
2008-04-12 21:41 ` John Rigg
2008-04-12 21:55 ` James Courtier-Dutton
2008-04-12 22:09 ` Rene Herman
2008-04-12 22:23 ` Rene Herman
2008-04-14 16:58 ` Lennart Poettering
2008-04-14 17:28 ` Rene Herman
2008-04-12 22:43 ` John Rigg
2008-04-13 12:36 ` Alexander E. Patrakov
2008-04-14 16:56 ` Lennart Poettering
2008-04-14 16:50 ` Lennart Poettering
2008-04-15 15:03 ` Wolfgang Woehl
2008-04-12 21:14 ` John Rigg
2008-04-12 21:54 ` stan
2008-04-12 23:00 ` John Rigg
2008-04-12 23:24 ` Lee Revell
2008-04-13 10:51 ` James Courtier-Dutton
2008-04-13 11:26 ` Florian Faber
2008-04-13 12:09 ` James Courtier-Dutton
2008-04-13 11:52 ` Rene Herman
2008-04-13 15:17 ` stan
2008-04-13 16:28 ` Rene Herman
2008-04-14 16:40 ` Lennart Poettering
2008-04-12 19:32 ` Rene Herman
2008-04-12 21:16 ` Rene Herman
2008-04-13 17:48 ` Mark Brown
2008-04-14 17:00 ` Lennart Poettering
2008-04-14 17:22 ` Rene Herman
2008-04-14 17:28 ` Lennart Poettering
2008-04-14 21:07 ` James Courtier-Dutton
2008-04-14 22:08 ` Aldrin Martoq
2008-04-14 23:43 ` Lennart Poettering
2008-04-14 23:54 ` Lee Revell
2008-04-15 2:18 ` Aldrin Martoq
2008-04-15 3:52 ` Florian Faber
2008-04-15 12:32 ` John Rigg
2008-04-15 13:12 ` John Rigg
2008-04-15 14:33 ` Rene Herman
2008-04-16 14:29 ` Rene Herman
2008-04-16 15:19 ` Rene Herman
2008-04-16 15:37 ` Rene Herman
2008-04-17 20:39 ` James Courtier-Dutton
2008-04-17 21:30 ` Rene Herman
2008-06-09 23:37 ` Rene Herman
2008-04-15 14:43 ` James Courtier-Dutton
2008-04-15 16:55 ` John Rigg [this message]
2008-04-15 15:42 ` Wolfgang Woehl
2008-04-15 15:51 ` Rene Herman
2008-04-15 16:41 ` John Rigg
2008-04-15 17:14 ` Wolfgang Woehl
2008-04-15 17:50 ` John Rigg
2008-04-20 1:01 ` Lennart Poettering
2008-04-20 15:23 ` stan
2008-04-21 3:20 ` Alexander E. Patrakov
2008-04-21 13:43 ` Takashi Iwai
2008-04-21 15:25 ` Rene Herman
2008-04-21 16:01 ` Jaroslav Kysela
2008-04-21 16:06 ` Takashi Iwai
2008-04-21 16:09 ` Jaroslav Kysela
2008-04-21 16:17 ` Takashi Iwai
2008-04-15 10:17 ` Takashi Iwai
2008-04-20 0:00 ` Lennart Poettering
2008-04-21 13:32 ` Takashi Iwai
2008-04-21 17:10 ` Rene Herman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080415165559.GB3393@localhost \
--to=aldev@sound-man.co.uk \
--cc=James@superbug.co.uk \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox