From: Wu Fengguang <fengguang.wu@intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
Thomas Schneider <nailstudio@gmx.net>
Subject: Re: [PATCH] enable concurrent digital outputs for ALC1200
Date: Fri, 6 Feb 2009 16:13:06 +0800 [thread overview]
Message-ID: <20090206081306.GA26674@localhost> (raw)
In-Reply-To: <s5hmyd0803x.wl%tiwai@suse.de>
On Fri, Feb 06, 2009 at 10:01:54AM +0200, Takashi Iwai wrote:
> At Fri, 6 Feb 2009 15:02:27 +0800,
> Wu Fengguang wrote:
> >
> > Add the SPDIF pin as slave digital out to enable concurrent
> > HDMI/SPDIF outputs for ASUS M3A-H/HDMI with ALC1200 codec.
> >
> > Tested-by: Thomas Schneider <nailstudio@gmx.net>
> > Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
>
> Applied now. Thanks.
>
> (We need a bit more (clean-up) work on these issues...)
I have an old patch that tries to convert the dig_out_pin from a
scaler into an array. I wonder if this is the way to go...
static int is_in_nid_list(hda_nid_t nid, hda_nid_t *list)
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index 7957fef..989e04b 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -341,7 +341,8 @@ struct auto_pin_cfg {
int line_out_type; /* AUTO_PIN_XXX_OUT */
hda_nid_t hp_pins[AUTO_CFG_MAX_OUTS];
hda_nid_t input_pins[AUTO_PIN_LAST];
- hda_nid_t dig_out_pin;
+ int dig_outs;
+ hda_nid_t dig_out_pins[AUTO_CFG_MAX_OUTS];
hda_nid_t dig_in_pin;
hda_nid_t mono_out_pin;
};
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 2b00c4a..bf94481 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -2841,7 +2841,7 @@ static int ad1988_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = AD1988_SPDIF_OUT;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = AD1988_SPDIF_IN;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index c2ff85d..47f06d0 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3784,7 +3784,7 @@ static int alc880_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = ALC880_DIGIN_NID;
@@ -5185,7 +5185,7 @@ static int alc260_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = 2;
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = ALC260_DIGOUT_NID;
if (spec->kctl_alloc)
spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
@@ -10249,7 +10249,7 @@ static int alc262_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = ALC262_DIGOUT_NID;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = ALC262_DIGIN_NID;
@@ -11382,7 +11382,7 @@ static int alc268_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = 2;
/* digital only support output */
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = ALC268_DIGOUT_NID;
if (spec->kctl_alloc)
@@ -12154,7 +12154,7 @@ static int alc269_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = ALC269_DIGOUT_NID;
if (spec->kctl_alloc)
@@ -13252,7 +13252,7 @@ static int alc861_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = ALC861_DIGOUT_NID;
if (spec->kctl_alloc)
@@ -14363,7 +14363,7 @@ static int alc861vd_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = ALC861VD_DIGOUT_NID;
if (spec->kctl_alloc)
@@ -16182,7 +16182,7 @@ static int alc662_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
if (spec->kctl_alloc)
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 63e4871..cf0ce0b 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -1368,7 +1368,7 @@ static int vt1708_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = VT1708_DIGOUT_NID;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = VT1708_DIGIN_NID;
@@ -1841,7 +1841,7 @@ static int vt1709_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = VT1709_DIGOUT_NID;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = VT1709_DIGIN_NID;
@@ -2385,7 +2385,7 @@ static int vt1708B_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = VT1708B_DIGOUT_NID;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = VT1708B_DIGIN_NID;
@@ -2850,7 +2850,7 @@ static int vt1708S_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = VT1708S_DIGOUT_NID;
spec->extra_dig_out_nid = 0x15;
@@ -3169,7 +3169,7 @@ static int vt1702_parse_auto_config(struct hda_codec *codec)
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
- if (spec->autocfg.dig_out_pin)
+ if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = VT1702_DIGOUT_NID;
spec->extra_dig_out_nid = 0x1B;
next prev parent reply other threads:[~2009-02-06 8:13 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-25 13:26 S/PDIF-Out on Asus M3A-H/HDMI with ALC1200] Thomas Schneider
2008-12-26 2:48 ` Wu Fengguang
2008-12-26 12:29 ` Thomas Schneider
2008-12-30 9:54 ` Wu Fengguang
2009-01-03 22:44 ` Thomas Schneider
2009-02-06 7:02 ` [PATCH] enable concurrent digital outputs for ALC1200 Wu Fengguang
2009-02-06 8:01 ` Takashi Iwai
2009-02-06 8:13 ` Wu Fengguang [this message]
2009-02-06 8:23 ` Takashi Iwai
2009-02-06 8:40 ` Wu Fengguang
2009-02-06 8:26 ` Takashi Iwai
2009-02-06 8:30 ` Wu Fengguang
2009-02-06 8:41 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090206081306.GA26674@localhost \
--to=fengguang.wu@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=nailstudio@gmx.net \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox