From: Thomas Schneider <nailstudio@gmx.net>
To: alsa-devel@alsa-project.org
Subject: Re: S/PDIF-Out on Asus M3A-H/HDMI with ALC1200]
Date: Sat, 03 Jan 2009 23:44:09 +0100 [thread overview]
Message-ID: <495FEA39.1000404@gmx.net> (raw)
In-Reply-To: <20081230095414.GA1206@localhost>
Hi,
yes the new patch fix the oops. And now i have sound on both
connections at the same time !!!
Many Thanks
Am 30.12.2008 10:54, schrieb Wu Fengguang:
> On Fri, Dec 26, 2008 at 01:29:30PM +0100, Thomas Schneider wrote:
>
>> Hi,
>>
>> sorry, i get a kernel oops with this changes when i activate iec958 in
>> the mixer !
>>
>>
>> [ 1435.041914] BUG: unable to handle kernel NULL pointer dereference at
>> 0000000000000006
>> [ 1435.041914] IP: [<ffffffff880d0223>] :snd_hda_codec:set_dig_out+0x47/0x57
>> [ 1435.041914] PGD 6b5c3067 PUD 781ba067 PMD 0
>> [ 1435.041914] Oops: 0000 [1] SMP
>>
>
> Sorry, does this new patch fixed the oops?
>
> Thanks,
> Fengguang
> ---
> sound/pci/hda/hda_local.h | 1 +
> sound/pci/hda/patch_realtek.c | 9 ++++++++-
> 2 files changed, 9 insertions(+), 1 deletion(-)
>
> --- sound-2.6.orig/sound/pci/hda/hda_local.h
> +++ sound-2.6/sound/pci/hda/hda_local.h
> @@ -227,6 +227,7 @@ struct hda_multi_out {
> hda_nid_t hp_nid; /* optional DAC for HP, 0 when not exists */
> hda_nid_t extra_out_nid[3]; /* optional DACs, 0 when not exists */
> hda_nid_t dig_out_nid; /* digital out audio widget */
> + hda_nid_t *slave_dig_outs;
> int max_channels; /* currently supported analog channels */
> int dig_out_used; /* current usage of digital out (HDA_DIG_XXX) */
> int no_share_stream; /* don't share a stream with multiple pins */
> --- sound-2.6.orig/sound/pci/hda/patch_realtek.c
> +++ sound-2.6/sound/pci/hda/patch_realtek.c
> @@ -336,6 +336,7 @@ struct alc_config_preset {
> hda_nid_t *dac_nids;
> hda_nid_t dig_out_nid; /* optional */
> hda_nid_t hp_nid; /* optional */
> + hda_nid_t *slave_dig_outs;
> unsigned int num_adc_nids;
> hda_nid_t *adc_nids;
> hda_nid_t *capsrc_nids;
> @@ -810,6 +811,7 @@ static void setup_preset(struct alc_spec
> spec->multiout.num_dacs = preset->num_dacs;
> spec->multiout.dac_nids = preset->dac_nids;
> spec->multiout.dig_out_nid = preset->dig_out_nid;
> + spec->multiout.slave_dig_outs = preset->slave_dig_outs;
> spec->multiout.hp_nid = preset->hp_nid;
>
> spec->num_mux_defs = preset->num_mux_defs;
> @@ -3085,6 +3087,7 @@ static int alc_build_pcms(struct hda_cod
> /* SPDIF for stream index #1 */
> if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
> codec->num_pcms = 2;
> + codec->slave_dig_outs = spec->multiout.slave_dig_outs;
> info = spec->pcm_rec + 1;
> info->name = spec->stream_name_digital;
> info->pcm_type = HDA_PCM_TYPE_SPDIF;
> @@ -8525,6 +8528,10 @@ static struct snd_pci_quirk alc883_cfg_t
> {}
> };
>
> +static hda_nid_t alc1200_slave_dig_outs[] = {
> + ALC883_DIGOUT_NID, 0,
> +};
> +
> static struct alc_config_preset alc883_presets[] = {
> [ALC883_3ST_2ch_DIG] = {
> .mixers = { alc883_3ST_2ch_mixer },
> @@ -8865,13 +8872,13 @@ static struct alc_config_preset alc883_p
> .dac_nids = alc883_dac_nids,
> .dig_out_nid = ALC1200_DIGOUT_NID,
> .dig_in_nid = ALC883_DIGIN_NID,
> + .slave_dig_outs = alc1200_slave_dig_outs,
> .num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes),
> .channel_mode = alc883_sixstack_modes,
> .input_mux =&alc883_capture_source,
> },
> };
>
> -
> /*
> * BIOS auto configuration
> */
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
>
next prev parent reply other threads:[~2009-01-03 22:44 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-25 13:26 S/PDIF-Out on Asus M3A-H/HDMI with ALC1200] Thomas Schneider
2008-12-26 2:48 ` Wu Fengguang
2008-12-26 12:29 ` Thomas Schneider
2008-12-30 9:54 ` Wu Fengguang
2009-01-03 22:44 ` Thomas Schneider [this message]
2009-02-06 7:02 ` [PATCH] enable concurrent digital outputs for ALC1200 Wu Fengguang
2009-02-06 8:01 ` Takashi Iwai
2009-02-06 8:13 ` Wu Fengguang
2009-02-06 8:23 ` Takashi Iwai
2009-02-06 8:40 ` Wu Fengguang
2009-02-06 8:26 ` Takashi Iwai
2009-02-06 8:30 ` Wu Fengguang
2009-02-06 8:41 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=495FEA39.1000404@gmx.net \
--to=nailstudio@gmx.net \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox