Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@sirena.org.uk>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: [PATCH 16/17] ASoC: Basic split of mpc5200 DMA	code out from mpc5200_psc_i2s
Date: Tue, 28 Apr 2009 20:25:45 +0100	[thread overview]
Message-ID: <20090428192543.GA4241@sirena.org.uk> (raw)
In-Reply-To: <s5hljpk233w.wl%tiwai@suse.de>

On Tue, Apr 28, 2009 at 05:46:11PM +0200, Takashi Iwai wrote:

> And, the jiffies check shall be anyway fixed in the upstream PCM core
> side, thus there is no big merit to hurry to merge the unfinished
> changes now.

The refactoring is a largely orthogonal issue to the jiffies check - the
refactoring is needed to split the DMA code out so that it can be shared
with the AC97 driver John is writing.

> So, could you back off mpc5200 changes and wait for a while until the
> issue regarding PCM jiffies-check is resolved?

Done:

The following changes since commit 8a1f936acdfd53cb0a981f3f80483863dcd84fa9:
  Peter Ujfalusi (1):
        ASoC: TWL4030: Add 4 channel TDM support

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.31

Daniel Mack (3):
      ASoC: add SOC_DOUBLE_EXT macro
      ASoC: cs4270: fix Master Capture Switch polarity
      ASoC: cs4270: add Master Playback Switch

Jon Smirl (1):
      ASoC: Set the MPC5200 i2s driver to BROKEN status.

Jonathan Cameron (1):
      ASoC WM8940 Driver

Joonyoung Shim (1):
      ASoC: TWL4030: Fix gain control for earpiece amplifier

Mark Brown (10):
      ASoC: Fix S3C64xx IIS device registration and support both ports
      ASoC: S3C2412: Failing to get the I2S clock is an error
      ASoC: Enforce symmetric rates for S3C64xx I2S interface
      ASoC: Include WM8350 register definitions in CODEC header
      ASoC: s3c-i2s-v2 diagnostic improvements
      ASoC: Use our registration function for S3C64xx
      ASoC: Fix logic in WM8350 master clocking check
      Merge branch 'for-2.6.30' into for-2.6.31
      ASoC: Staticise TLV values in WM8940
      Merge branch 'for-2.6.30' into for-2.6.31

Peter Ujfalusi (1):
      ASoC: Beagle: Add support for 4 channel

 include/sound/soc.h             |    8 +
 sound/soc/codecs/Kconfig        |    4 +
 sound/soc/codecs/Makefile       |    2 +
 sound/soc/codecs/cs4270.c       |   44 ++-
 sound/soc/codecs/twl4030.c      |    8 +-
 sound/soc/codecs/wm8350.c       |    2 +-
 sound/soc/codecs/wm8350.h       |    1 +
 sound/soc/codecs/wm8940.c       |  955 +++++++++++++++++++++++++++++++++++++++
 sound/soc/codecs/wm8940.h       |  104 +++++
 sound/soc/fsl/Kconfig           |    2 +-
 sound/soc/omap/omap3beagle.c    |   26 +-
 sound/soc/s3c24xx/s3c2412-i2s.c |    2 +-
 sound/soc/s3c24xx/s3c64xx-i2s.c |  148 ++++--
 sound/soc/s3c24xx/s3c64xx-i2s.h |    2 +-
 14 files changed, 1241 insertions(+), 67 deletions(-)
 create mode 100644 sound/soc/codecs/wm8940.c
 create mode 100644 sound/soc/codecs/wm8940.h

  parent reply	other threads:[~2009-04-28 19:26 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-28 15:22 ASoC updates for 2.6.31 Mark Brown
2009-04-28 15:23 ` [PATCH 01/17] ASoC: Beagle: Add support for 4 channel Mark Brown
2009-04-28 15:23 ` [PATCH 02/17] ASoC: add SOC_DOUBLE_EXT macro Mark Brown
2009-04-28 15:23 ` [PATCH 03/17] ASoC: Fix S3C64xx IIS device registration and support both ports Mark Brown
2009-04-28 15:23 ` [PATCH 04/17] ASoC: S3C2412: Failing to get the I2S clock is an error Mark Brown
2009-04-28 15:23 ` [PATCH 05/17] ASoC: Enforce symmetric rates for S3C64xx I2S interface Mark Brown
2009-04-28 15:23 ` [PATCH 06/17] ASoC: Include WM8350 register definitions in CODEC header Mark Brown
2009-04-28 15:23 ` [PATCH 07/17] ASoC: s3c-i2s-v2 diagnostic improvements Mark Brown
2009-04-28 15:23 ` [PATCH 08/17] ASoC: Use our registration function for S3C64xx Mark Brown
2009-04-28 15:23 ` [PATCH 09/17] ASoC WM8940 Driver Mark Brown
2009-04-28 15:23 ` [PATCH 10/17] ASoC: cs4270: fix Master Capture Switch polarity Mark Brown
2009-04-28 15:23 ` [PATCH 11/17] ASoC: cs4270: add Master Playback Switch Mark Brown
2009-04-28 15:23 ` [PATCH 12/17] ASoC: Fix logic in WM8350 master clocking check Mark Brown
2009-04-28 15:23 ` [PATCH 13/17] ASoC: Set the MPC5200 i2s driver to BROKEN status Mark Brown
2009-04-28 15:23 ` [PATCH 14/17] ASoC: Staticise TLV values in WM8940 Mark Brown
2009-04-28 15:23 ` [PATCH 15/17] ASoC: TWL4030: Fix gain control for earpiece amplifier Mark Brown
2009-04-28 15:23 ` [PATCH 16/17] ASoC: Basic split of mpc5200 DMA code out from mpc5200_psc_i2s Mark Brown
2009-04-28 15:46   ` Takashi Iwai
2009-04-28 15:59     ` Jon Smirl
2009-04-28 16:51       ` Takashi Iwai
2009-04-28 16:55         ` Jon Smirl
2009-04-28 17:14           ` Jon Smirl
2009-04-28 19:37             ` Takashi Iwai
2009-04-28 19:53               ` Mark Brown
2009-04-28 19:59                 ` Jon Smirl
2009-04-28 20:16                   ` Jon Smirl
2009-04-28 21:01                   ` Mark Brown
2009-04-28 22:06                   ` Takashi Iwai
2009-04-28 21:59                 ` Takashi Iwai
2009-04-28 19:35           ` Takashi Iwai
2009-04-28 19:37           ` Mark Brown
2009-04-28 19:25     ` Mark Brown [this message]
2009-04-28 19:32       ` Jon Smirl
2009-04-28 19:50         ` Mark Brown
2009-04-28 21:52       ` Takashi Iwai
2009-04-28 15:23 ` [PATCH 17/17] ASoC: Rename the PSC functions to DMA Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090428192543.GA4241@sirena.org.uk \
    --to=broonie@sirena.org.uk \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox