From: Wu Fengguang <fengguang.wu@intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org,
"Wu Fengguang" <fengguang.wu@intel.com>,
"Shane W" <shane-alsa@csy.ca>,
"David Härdeman" <david@hardeman.nu>
Subject: [PATCH 10/11] hda - show EPSS capability in proc
Date: Sun, 15 Nov 2009 19:32:29 +0800 [thread overview]
Message-ID: <20091115114440.582244270@intel.com> (raw)
In-Reply-To: 20091115113219.606666087@intel.com
[-- Attachment #1: hda-power-epss.patch --]
[-- Type: text/plain, Size: 2366 bytes --]
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
---
sound/pci/hda/hda_codec.h | 4 ++++
sound/pci/hda/hda_proc.c | 31 +++++++++++++++++++++++++++++++
2 files changed, 35 insertions(+)
--- sound-2.6.orig/sound/pci/hda/hda_codec.h 2009-11-15 19:28:28.000000000 +0800
+++ sound-2.6/sound/pci/hda/hda_codec.h 2009-11-15 19:28:57.000000000 +0800
@@ -286,6 +286,10 @@ enum {
#define AC_PWRST_D1SUP (1<<1)
#define AC_PWRST_D2SUP (1<<2)
#define AC_PWRST_D3SUP (1<<3)
+#define AC_PWRST_D3COLDSUP (1<<4)
+#define AC_PWRST_S3D3COLDSUP (1<<29)
+#define AC_PWRST_CLKSTOP (1<<30)
+#define AC_PWRST_EPSS (1U<<31)
/* Power state values */
#define AC_PWRST_SETTING (0xf<<0)
--- sound-2.6.orig/sound/pci/hda/hda_proc.c 2009-11-15 19:28:28.000000000 +0800
+++ sound-2.6/sound/pci/hda/hda_proc.c 2009-11-15 19:31:44.000000000 +0800
@@ -26,6 +26,21 @@
#include "hda_codec.h"
#include "hda_local.h"
+static char *bits_names(unsigned int bits, char *names[], int size)
+{
+ int i, n;
+ static char buf[128];
+
+ for (i = 0, n = 0; i < size; i++) {
+ if (bits & (1U<<i) && names[i])
+ n += snprintf(buf + n, sizeof(buf) - n, " %s",
+ names[i]);
+ }
+ buf[n] = '\0';
+
+ return buf;
+}
+
static const char *get_wid_type_name(unsigned int wid_value)
{
static char *names[16] = {
@@ -363,8 +378,24 @@ static const char *get_pwr_state(u32 sta
static void print_power_state(struct snd_info_buffer *buffer,
struct hda_codec *codec, hda_nid_t nid)
{
+ static char *names[] = {
+ [ilog2(AC_PWRST_D0SUP)] = "D0",
+ [ilog2(AC_PWRST_D1SUP)] = "D1",
+ [ilog2(AC_PWRST_D2SUP)] = "D2",
+ [ilog2(AC_PWRST_D3SUP)] = "D3",
+ [ilog2(AC_PWRST_D3COLDSUP)] = "D3cold",
+ [ilog2(AC_PWRST_S3D3COLDSUP)] = "S3D3cold",
+ [ilog2(AC_PWRST_CLKSTOP)] = "CLKSTOP",
+ [ilog2(AC_PWRST_EPSS)] = "EPSS",
+ };
+
+ int sup = snd_hda_param_read(codec, nid, AC_PAR_POWER_STATE);
int pwr = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_POWER_STATE, 0);
+ if (sup)
+ snd_iprintf(buffer, " Power states: %s\n",
+ bits_names(sup, names, ARRAY_SIZE(names)));
+
snd_iprintf(buffer, " Power: setting=%s, actual=%s\n",
get_pwr_state(pwr & AC_PWRST_SETTING),
get_pwr_state((pwr & AC_PWRST_ACTUAL) >>
next prev parent reply other threads:[~2009-11-15 11:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-15 11:32 [PATCH 00/11] Intel HDMI fixes Wu Fengguang
2009-11-15 11:32 ` [PATCH 01/11] intelhdmi - fix audio infoframe fill size Wu Fengguang
2009-11-15 11:32 ` [PATCH 02/11] intelhdmi - fix channel mapping slot mask Wu Fengguang
2009-11-15 11:32 ` [PATCH 03/11] intelhdmi - export monitor-presence and ELD-valid status Wu Fengguang
2009-11-15 11:32 ` [PATCH 04/11] hda - introduce snd_hda_pin_sense() Wu Fengguang
2009-11-15 11:32 ` [PATCH 05/11] intelhdmi - probe for monitor/eld presence at module init time Wu Fengguang
2009-11-15 11:32 ` [PATCH 06/11] intelhdmi - separate out infoframe checksum routine Wu Fengguang
2009-11-15 11:32 ` [PATCH 07/11] intelhdmi - sticky infoframe Wu Fengguang
2009-11-15 11:32 ` [PATCH 08/11] intelhdmi - sticky stream id and format Wu Fengguang
2009-11-15 11:32 ` [PATCH 09/11] intelhdmi - sticky channel count Wu Fengguang
2009-11-15 11:32 ` Wu Fengguang [this message]
2009-11-15 11:32 ` [PATCH 11/11] intelhdmi - keep power on to avoid losing hot plug event Wu Fengguang
2009-11-15 15:54 ` [PATCH 00/11] Intel HDMI fixes Takashi Iwai
2009-11-18 4:35 ` Wu Fengguang
2009-11-16 17:12 ` Shane W
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091115114440.582244270@intel.com \
--to=fengguang.wu@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=david@hardeman.nu \
--cc=shane-alsa@csy.ca \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox