[PATCH 00/12] treewide: Fix GENMASK misuses

[PATCH 00/12] treewide: Fix GENMASK misuses

[Joe Perches]

These GENMASK uses are inverted argument order and the
actual masks produced are incorrect.  Fix them.

Add checkpatch tests to help avoid more misuses too.

Joe Perches (12):
  checkpatch: Add GENMASK tests
  clocksource/drivers/npcm: Fix misuse of GENMASK macro
  drm: aspeed_gfx: Fix misuse of GENMASK macro
  iio: adc: max9611: Fix misuse of GENMASK macro
  irqchip/gic-v3-its: Fix misuse of GENMASK macro
  mmc: meson-mx-sdio: Fix misuse of GENMASK macro
  net: ethernet: mediatek: Fix misuses of GENMASK macro
  net: stmmac: Fix misuses of GENMASK macro
  rtw88: Fix misuse of GENMASK macro
  phy: amlogic: G12A: Fix misuse of GENMASK macro
  staging: media: cedrus: Fix misuse of GENMASK macro
  ASoC: wcd9335: Fix misuse of GENMASK macro

 drivers/clocksource/timer-npcm7xx.c               |  2 +-
 drivers/gpu/drm/aspeed/aspeed_gfx.h               |  2 +-
 drivers/iio/adc/max9611.c                         |  2 +-
 drivers/irqchip/irq-gic-v3-its.c                  |  2 +-
 drivers/mmc/host/meson-mx-sdio.c                  |  2 +-
 drivers/net/ethernet/mediatek/mtk_eth_soc.h       |  2 +-
 drivers/net/ethernet/mediatek/mtk_sgmii.c         |  2 +-
 drivers/net/ethernet/stmicro/stmmac/descs.h       |  2 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c |  4 ++--
 drivers/net/wireless/realtek/rtw88/rtw8822b.c     |  2 +-
 drivers/phy/amlogic/phy-meson-g12a-usb2.c         |  2 +-
 drivers/staging/media/sunxi/cedrus/cedrus_regs.h  |  2 +-
 scripts/checkpatch.pl                             | 15 +++++++++++++++
 sound/soc/codecs/wcd-clsh-v2.c                    |  2 +-
 14 files changed, 29 insertions(+), 14 deletions(-)

-- 
2.15.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 12/12] ASoC: wcd9335: Fix misuse of GENMASK macro

[Joe Perches]

Arguments are supposed to be ordered high then low.

Signed-off-by: Joe Perches <joe@perches.com>
---
 sound/soc/codecs/wcd-clsh-v2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wcd-clsh-v2.c b/sound/soc/codecs/wcd-clsh-v2.c
index c397d713f01a..cc5a9c9b918b 100644
--- a/sound/soc/codecs/wcd-clsh-v2.c
+++ b/sound/soc/codecs/wcd-clsh-v2.c
@@ -65,7 +65,7 @@ struct wcd_clsh_ctrl {
 #define WCD9XXX_FLYBACK_EN_PWDN_WITH_DELAY			0
 #define WCD9XXX_RX_BIAS_FLYB_BUFF			WCD9335_REG(0x6, 0xC7)
 #define WCD9XXX_RX_BIAS_FLYB_VNEG_5_UA_MASK		GENMASK(7, 4)
-#define WCD9XXX_RX_BIAS_FLYB_VPOS_5_UA_MASK		GENMASK(0, 3)
+#define WCD9XXX_RX_BIAS_FLYB_VPOS_5_UA_MASK		GENMASK(3, 0)
 #define WCD9XXX_HPH_L_EN				WCD9335_REG(0x6, 0xD3)
 #define WCD9XXX_HPH_CONST_SEL_L_MASK			GENMASK(7, 3)
 #define WCD9XXX_HPH_CONST_SEL_BYPASS			0
-- 
2.15.0

Applied "ASoC: wcd9335: Fix misuse of GENMASK macro" to the asoc tree

[Mark Brown]

The patch

   ASoC: wcd9335: Fix misuse of GENMASK macro

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From f7408a3d5b5fd10571a653d1a81ce9167c62727f Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 9 Jul 2019 22:04:25 -0700
Subject: [PATCH] ASoC: wcd9335: Fix misuse of GENMASK macro

Arguments are supposed to be ordered high then low.

Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/92e31a9f321fe731d428ec3ec9d4654ea8a16d1b.1562734889.git.joe@perches.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/codecs/wcd-clsh-v2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wcd-clsh-v2.c b/sound/soc/codecs/wcd-clsh-v2.c
index c397d713f01a..cc5a9c9b918b 100644
--- a/sound/soc/codecs/wcd-clsh-v2.c
+++ b/sound/soc/codecs/wcd-clsh-v2.c
@@ -65,7 +65,7 @@ struct wcd_clsh_ctrl {
 #define WCD9XXX_FLYBACK_EN_PWDN_WITH_DELAY			0
 #define WCD9XXX_RX_BIAS_FLYB_BUFF			WCD9335_REG(0x6, 0xC7)
 #define WCD9XXX_RX_BIAS_FLYB_VNEG_5_UA_MASK		GENMASK(7, 4)
-#define WCD9XXX_RX_BIAS_FLYB_VPOS_5_UA_MASK		GENMASK(0, 3)
+#define WCD9XXX_RX_BIAS_FLYB_VPOS_5_UA_MASK		GENMASK(3, 0)
 #define WCD9XXX_HPH_L_EN				WCD9335_REG(0x6, 0xD3)
 #define WCD9XXX_HPH_CONST_SEL_L_MASK			GENMASK(7, 3)
 #define WCD9XXX_HPH_CONST_SEL_BYPASS			0
-- 
2.20.1

Re: [PATCH 00/12] treewide: Fix GENMASK misuses

[Johannes Berg]

On Tue, 2019-07-09 at 22:04 -0700, Joe Perches wrote:
> These GENMASK uses are inverted argument order and the
> actual masks produced are incorrect.  Fix them.
> 
> Add checkpatch tests to help avoid more misuses too.
> 
> Joe Perches (12):
>   checkpatch: Add GENMASK tests

IMHO this doesn't make a lot of sense as a checkpatch test - just throw
in a BUILD_BUG_ON()?

johannes

Re: [PATCH 00/12] treewide: Fix GENMASK misuses

[Russell King - ARM Linux admin]

On Wed, Jul 10, 2019 at 11:17:31AM +0200, Johannes Berg wrote:
> On Tue, 2019-07-09 at 22:04 -0700, Joe Perches wrote:
> > These GENMASK uses are inverted argument order and the
> > actual masks produced are incorrect.  Fix them.
> > 
> > Add checkpatch tests to help avoid more misuses too.
> > 
> > Joe Perches (12):
> >   checkpatch: Add GENMASK tests
> 
> IMHO this doesn't make a lot of sense as a checkpatch test - just throw
> in a BUILD_BUG_ON()?

My personal take on this is that GENMASK() is really not useful, it's
just pure obfuscation and leads to exactly these kinds of mistakes.

Yes, I fully understand the argument that you can just specify the
start and end bits, and it _in theory_ makes the code more readable.

However, the problem is when writing code.  GENMASK(a, b).  Is a the
starting bit or ending bit?  Is b the number of bits?  It's confusing
and causes mistakes resulting in incorrect code.  A BUILD_BUG_ON()
can catch some of the cases, but not all of them.

For example:

	GENMASK(6, 2)

would satisify the requirement that a > b, so a BUILD_BUG_ON() will
not trigger, but was the author meaning 0x3c or 0xc0?

Personally, I've decided I am _not_ going to use GENMASK() in my code
because I struggle to get the macro arguments correct - I'm _much_
happier, and it is way more reliable for me to write the mask in hex
notation.

I think this is where use of a ternary operator would come in use.  The
normal way of writing a number of bits tends to be "a:b", so if GENMASK
took something like GENMASK(6:2), then I'd have less issue with it,
because it's argument is then in a familiar notation.

Yes, I'm sure that someone will point out that the GENMASK arguments
are just in the same order, but that doesn't prevent _me_ frequently
getting it wrong - and that's the point.  The macro seems to me to
cause more problems than it solves.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 00/12] treewide: Fix GENMASK misuses

[Joe Perches]

On Wed, 2019-07-10 at 10:43 +0100, Russell King - ARM Linux admin wrote:
> On Wed, Jul 10, 2019 at 11:17:31AM +0200, Johannes Berg wrote:
> > On Tue, 2019-07-09 at 22:04 -0700, Joe Perches wrote:
> > > These GENMASK uses are inverted argument order and the
> > > actual masks produced are incorrect.  Fix them.
> > > 
> > > Add checkpatch tests to help avoid more misuses too.
> > > 
> > > Joe Perches (12):
> > >   checkpatch: Add GENMASK tests
> > 
> > IMHO this doesn't make a lot of sense as a checkpatch test - just throw
> > in a BUILD_BUG_ON()?

I tried that.

It'd can't be done as it's used in declarations
and included in asm files and it uses the UL()
macro.

I also tried just making it do the right thing
whatever the argument order.

Oh well.

> My personal take on this is that GENMASK() is really not useful, it's
> just pure obfuscation and leads to exactly these kinds of mistakes.
> 
> Yes, I fully understand the argument that you can just specify the
> start and end bits, and it _in theory_ makes the code more readable.
> 
> However, the problem is when writing code.  GENMASK(a, b).  Is a the
> starting bit or ending bit?  Is b the number of bits?  It's confusing
> and causes mistakes resulting in incorrect code.  A BUILD_BUG_ON()
> can catch some of the cases, but not all of them.

It's a horrid little macro and I agree with Russell.

I also think if it existed at all it should have been
GENMASK(low, high) not GENMASK(high, low).

I

Re: [PATCH 00/12] treewide: Fix GENMASK misuses

[Joe Perches]

On Wed, 2019-07-10 at 08:45 -0700, Joe Perches wrote:
> On Wed, 2019-07-10 at 10:43 +0100, Russell King - ARM Linux admin wrote:
> > On Wed, Jul 10, 2019 at 11:17:31AM +0200, Johannes Berg wrote:
> > > On Tue, 2019-07-09 at 22:04 -0700, Joe Perches wrote:
> > > > These GENMASK uses are inverted argument order and the
> > > > actual masks produced are incorrect.  Fix them.
> > > > 
> > > > Add checkpatch tests to help avoid more misuses too.
> > > > 
> > > > Joe Perches (12):
> > > >   checkpatch: Add GENMASK tests
> > > 
> > > IMHO this doesn't make a lot of sense as a checkpatch test - just throw
> > > in a BUILD_BUG_ON()?
> 
> I tried that.
> 
> It'd can't be done as it's used in declarations
> and included in asm files and it uses the UL()
> macro.
> 
> I also tried just making it do the right thing
> whatever the argument order.

I forgot.

I also made all those arguments when it was
introduced in 2013.

https://lore.kernel.org/patchwork/patch/414248/

> Oh well.

yeah.

Re: [PATCH 00/12] treewide: Fix GENMASK misuses

[David Miller]

From: Joe Perches <joe@perches.com>
Date: Tue,  9 Jul 2019 22:04:13 -0700

> These GENMASK uses are inverted argument order and the
> actual masks produced are incorrect.  Fix them.
> 
> Add checkpatch tests to help avoid more misuses too.

Patches #7 and #8 applied to 'net', with appropriate Fixes tags
added to #8.

Re: [PATCH 00/12] treewide: Fix GENMASK misuses

[Andrzej Hajda]

Hi Joe,

On 10.07.2019 07:04, Joe Perches wrote:
> These GENMASK uses are inverted argument order and the
> actual masks produced are incorrect.  Fix them.
>
> Add checkpatch tests to help avoid more misuses too.
>
> Joe Perches (12):
>   checkpatch: Add GENMASK tests
>   clocksource/drivers/npcm: Fix misuse of GENMASK macro
>   drm: aspeed_gfx: Fix misuse of GENMASK macro
>   iio: adc: max9611: Fix misuse of GENMASK macro
>   irqchip/gic-v3-its: Fix misuse of GENMASK macro
>   mmc: meson-mx-sdio: Fix misuse of GENMASK macro
>   net: ethernet: mediatek: Fix misuses of GENMASK macro
>   net: stmmac: Fix misuses of GENMASK macro
>   rtw88: Fix misuse of GENMASK macro
>   phy: amlogic: G12A: Fix misuse of GENMASK macro
>   staging: media: cedrus: Fix misuse of GENMASK macro
>   ASoC: wcd9335: Fix misuse of GENMASK macro
>
>  drivers/clocksource/timer-npcm7xx.c               |  2 +-
>  drivers/gpu/drm/aspeed/aspeed_gfx.h               |  2 +-
>  drivers/iio/adc/max9611.c                         |  2 +-
>  drivers/irqchip/irq-gic-v3-its.c                  |  2 +-
>  drivers/mmc/host/meson-mx-sdio.c                  |  2 +-
>  drivers/net/ethernet/mediatek/mtk_eth_soc.h       |  2 +-
>  drivers/net/ethernet/mediatek/mtk_sgmii.c         |  2 +-
>  drivers/net/ethernet/stmicro/stmmac/descs.h       |  2 +-
>  drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c |  4 ++--
>  drivers/net/wireless/realtek/rtw88/rtw8822b.c     |  2 +-
>  drivers/phy/amlogic/phy-meson-g12a-usb2.c         |  2 +-
>  drivers/staging/media/sunxi/cedrus/cedrus_regs.h  |  2 +-
>  scripts/checkpatch.pl                             | 15 +++++++++++++++
>  sound/soc/codecs/wcd-clsh-v2.c                    |  2 +-
>  14 files changed, 29 insertions(+), 14 deletions(-)
>
After adding following compile time check:

------

diff --git a/Makefile b/Makefile
index 5102b2bbd224..ac4ea5f443a9 100644
--- a/Makefile
+++ b/Makefile
@@ -457,7 +457,7 @@ KBUILD_AFLAGS   := -D__ASSEMBLY__ -fno-PIE
 KBUILD_CFLAGS   := -Wall -Wundef -Werror=strict-prototypes -Wno-trigraphs \
                   -fno-strict-aliasing -fno-common -fshort-wchar -fno-PIE \
                   -Werror=implicit-function-declaration
-Werror=implicit-int \
-                  -Wno-format-security \
+                  -Wno-format-security -Werror=div-by-zero \
                   -std=gnu89
 KBUILD_CPPFLAGS := -D__KERNEL__
 KBUILD_AFLAGS_KERNEL :=
diff --git a/include/linux/bits.h b/include/linux/bits.h
index 669d69441a62..61d74b103055 100644
--- a/include/linux/bits.h
+++ b/include/linux/bits.h
@@ -19,11 +19,11 @@
  * GENMASK_ULL(39, 21) gives us the 64bit vector 0x000000ffffe00000.
  */
 #define GENMASK(h, l) \
-       (((~UL(0)) - (UL(1) << (l)) + 1) & \
+       (((~UL(0)) - (UL(1) << (l)) + 1 + 0/((h) >= (l))) & \
         (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
 
 #define GENMASK_ULL(h, l) \
-       (((~ULL(0)) - (ULL(1) << (l)) + 1) & \
+       (((~ULL(0)) - (ULL(1) << (l)) + 1 + 0/((h) >= (l))) & \
         (~ULL(0) >> (BITS_PER_LONG_LONG - 1 - (h))))
 
 #endif /* __LINUX_BITS_H */

-------

I was able to detect one more GENMASK misue (AARCH64, allyesconfig):

  CC      drivers/phy/rockchip/phy-rockchip-inno-hdmi.o
In file included from ../include/linux/bitops.h:5:0,
                 from ../include/linux/kernel.h:12,
                 from ../include/linux/clk.h:13,
                 from ../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:9:
../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c: In function
‘inno_hdmi_phy_rk3328_power_on’:
../include/linux/bits.h:22:37: error: division by zero [-Werror=div-by-zero]
  (((~UL(0)) - (UL(1) << (l)) + 1 + 0/((h) >= (l))) & \
                                     ^
../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:24:42: note: in
expansion of macro ‘GENMASK’
 #define UPDATE(x, h, l)  (((x) << (l)) & GENMASK((h), (l)))
                                          ^~~~~~~
../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:201:50: note: in
expansion of macro ‘UPDATE’
 #define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x)  UPDATE(x, 7, 9)
                                                  ^~~~~~
../drivers/phy/rockchip/phy-rockchip-inno-hdmi.c:1046:26: note: in
expansion of macro ‘RK3328_TERM_RESISTOR_CALIB_SPEED_7_0’
   inno_write(inno, 0xc6, RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(v));


Of course I do not advise to add the check as is to Kernel - it is
undefined behavior area AFAIK.


Regards

Andrzej

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel