[alsa-devel] [PATCH AUTOSEL 4.19 082/177] ALSA: hda - Fix pending unsol events at shutdown

[alsa-devel] [PATCH AUTOSEL 4.19 082/177] ALSA: hda - Fix pending unsol events at shutdown

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit ca58f55108fee41d87c9123f85ad4863e5de7f45 ]

This is an alternative fix attemp for the issue reported in the commit
caa8422d01e9 ("ALSA: hda: Flush interrupts on disabling") that was
reverted later due to regressions.  Instead of tweaking the hardware
disablement order and the enforced irq flushing, do calling
cancel_work_sync() of the unsol work early enough, and explicitly
ignore the unsol events during the shutdown by checking the
bus->shutdown flag.

Fixes: caa8422d01e9 ("ALSA: hda: Flush interrupts on disabling")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/s5h1ruxt9cz.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_bind.c  | 4 ++++
 sound/pci/hda/hda_intel.c | 3 +++
 2 files changed, 7 insertions(+)

diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c
index 8db1890605f60..c175b2cf63f77 100644
--- a/sound/pci/hda/hda_bind.c
+++ b/sound/pci/hda/hda_bind.c
@@ -42,6 +42,10 @@ static void hda_codec_unsol_event(struct hdac_device *dev, unsigned int ev)
 {
 	struct hda_codec *codec = container_of(dev, struct hda_codec, core);
 
+	/* ignore unsol events during shutdown */
+	if (codec->bus->shutdown)
+		return;
+
 	if (codec->patch_ops.unsol_event)
 		codec->patch_ops.unsol_event(codec, ev);
 }
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 0b24c5ce2fd6a..d63fea5d1c929 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1492,8 +1492,11 @@ static int azx_free(struct azx *chip)
 static int azx_dev_disconnect(struct snd_device *device)
 {
 	struct azx *chip = device->device_data;
+	struct hdac_bus *bus = azx_bus(chip);
 
 	chip->bus.shutdown = 1;
+	cancel_work_sync(&bus->unsol_work);
+
 	return 0;
 }
 
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 086/177] ALSA: hda/hdmi - implement mst_no_extra_pcms flag

[Sasha Levin]

From: Kai Vehmanen <kai.vehmanen@linux.intel.com>

[ Upstream commit 2a2edfbbfee47947dd05f5860c66c0e80ee5e09d ]

To support the DP-MST multiple streams via single connector feature,
the HDMI driver was extended with the concept of backup PCMs. See
commit 9152085defb6 ("ALSA: hda - add DP MST audio support").

This implementation works fine with snd_hda_intel.c as PCM topology
is fully managed within the single driver.

When the HDA codec driver is used from ASoC components, the concept
of backup PCMs no longer fits. For ASoC topologies, the physical
HDMI converters are presented as backend DAIs and these should match
with hardware capabilities. The ASoC topology may define arbitrary
PCMs (i.e. frontend DAIs) and have processing elements before eventual
routing to the HDMI BE DAIs. With backup PCMs, the link between
FE and BE DAIs would become dynamic and change when monitors are
(un)plugged. This would lead to modifying the topology every time
hotplug events happen, which is not currently possible in ASoC and
there does not seem to be any obvious benefits from this design.

To overcome above problems and enable the HDMI driver to be used
from ASoC, this patch adds a new mode (mst_no_extra_pcms flags) to
patch_hdmi.c. In this mode, the codec driver does not assume
the backup PCMs to be created.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_codec.h  |  1 +
 sound/pci/hda/patch_hdmi.c | 19 ++++++++++++++-----
 2 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 2003403ce1c82..199927694aeff 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -262,6 +262,7 @@ struct hda_codec {
 	unsigned int force_pin_prefix:1; /* Add location prefix */
 	unsigned int link_down_at_suspend:1; /* link down at runtime suspend */
 	unsigned int relaxed_resume:1;	/* don't resume forcibly for jack */
+	unsigned int mst_no_extra_pcms:1; /* no backup PCMs for DP-MST */
 
 #ifdef CONFIG_PM
 	unsigned long power_on_acct;
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index c827a2a89cc3d..9d5e3c8d62b93 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2063,15 +2063,24 @@ static bool is_hdmi_pcm_attached(struct hdac_device *hdac, int pcm_idx)
 static int generic_hdmi_build_pcms(struct hda_codec *codec)
 {
 	struct hdmi_spec *spec = codec->spec;
-	int idx;
+	int idx, pcm_num;
 
 	/*
 	 * for non-mst mode, pcm number is the same as before
-	 * for DP MST mode, pcm number is (nid number + dev_num - 1)
-	 *  dev_num is the device entry number in a pin
-	 *
+	 * for DP MST mode without extra PCM, pcm number is same
+	 * for DP MST mode with extra PCMs, pcm number is
+	 *  (nid number + dev_num - 1)
+	 * dev_num is the device entry number in a pin
 	 */
-	for (idx = 0; idx < spec->num_nids + spec->dev_num - 1; idx++) {
+
+	if (codec->mst_no_extra_pcms)
+		pcm_num = spec->num_nids;
+	else
+		pcm_num = spec->num_nids + spec->dev_num - 1;
+
+	codec_dbg(codec, "hdmi: pcm_num set to %d\n", pcm_num);
+
+	for (idx = 0; idx < pcm_num; idx++) {
 		struct hda_pcm *info;
 		struct hda_pcm_stream *pstr;
 
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 106/177] ALSA: timer: Limit max amount of slave instances

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit fdea53fe5de532969a332d6e5e727f2ad8bf084d ]

The fuzzer tries to open the timer instances as much as possible, and
this may cause a system hiccup easily.  We've already introduced the
cap for the max number of available instances for the h/w timers, and
we should put such a limit also to the slave timers, too.

This patch introduces the limit to the multiple opened slave timers.
The upper limit is hard-coded to 1000 for now, which should suffice
for any practical usages up to now.

Link: https://lore.kernel.org/r/20191106154257.5853-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/timer.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/core/timer.c b/sound/core/timer.c
index 86a31e69fc7d9..b5dc51030316a 100644
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -88,6 +88,9 @@ static LIST_HEAD(snd_timer_slave_list);
 /* lock for slave active lists */
 static DEFINE_SPINLOCK(slave_active_lock);
 
+#define MAX_SLAVE_INSTANCES	1000
+static int num_slaves;
+
 static DEFINE_MUTEX(register_mutex);
 
 static int snd_timer_free(struct snd_timer *timer);
@@ -266,6 +269,10 @@ int snd_timer_open(struct snd_timer_instance **ti,
 			err = -EINVAL;
 			goto unlock;
 		}
+		if (num_slaves >= MAX_SLAVE_INSTANCES) {
+			err = -EBUSY;
+			goto unlock;
+		}
 		timeri = snd_timer_instance_new(owner, NULL);
 		if (!timeri) {
 			err = -ENOMEM;
@@ -275,6 +282,7 @@ int snd_timer_open(struct snd_timer_instance **ti,
 		timeri->slave_id = tid->device;
 		timeri->flags |= SNDRV_TIMER_IFLG_SLAVE;
 		list_add_tail(&timeri->open_list, &snd_timer_slave_list);
+		num_slaves++;
 		err = snd_timer_check_slave(timeri);
 		if (err < 0) {
 			snd_timer_close_locked(timeri, &card_dev_to_put);
@@ -364,6 +372,8 @@ static int snd_timer_close_locked(struct snd_timer_instance *timeri,
 	struct snd_timer_instance *slave, *tmp;
 
 	list_del(&timeri->open_list);
+	if (timeri->flags & SNDRV_TIMER_IFLG_SLAVE)
+		num_slaves--;
 
 	/* force to stop the timer */
 	snd_timer_stop(timeri);
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 130/177] soundwire: intel: fix PDI/stream mapping for Bulk

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit c134f914e9f55b7817e2bae625ec0e5f1379f7cd ]

The previous formula is incorrect for PDI0/1, the mapping is not
linear but has a discontinuity between PDI1 and PDI2.

This change has no effect on PCM PDIs (same mapping).

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022232948.17156-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soundwire/intel.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index 29bc99c4a7b66..e49d3c810677a 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -352,7 +352,10 @@ intel_pdi_shim_configure(struct sdw_intel *sdw, struct sdw_cdns_pdi *pdi)
 	unsigned int link_id = sdw->instance;
 	int pdi_conf = 0;
 
-	pdi->intel_alh_id = (link_id * 16) + pdi->num + 5;
+	/* the Bulk and PCM streams are not contiguous */
+	pdi->intel_alh_id = (link_id * 16) + pdi->num + 3;
+	if (pdi->num >= 2)
+		pdi->intel_alh_id += 2;
 
 	/*
 	 * Program stream parameters to stream SHIM register
@@ -381,7 +384,10 @@ intel_pdi_alh_configure(struct sdw_intel *sdw, struct sdw_cdns_pdi *pdi)
 	unsigned int link_id = sdw->instance;
 	unsigned int conf;
 
-	pdi->intel_alh_id = (link_id * 16) + pdi->num + 5;
+	/* the Bulk and PCM streams are not contiguous */
+	pdi->intel_alh_id = (link_id * 16) + pdi->num + 3;
+	if (pdi->num >= 2)
+		pdi->intel_alh_id += 2;
 
 	/* Program Stream config ALH register */
 	conf = intel_readl(alh, SDW_ALH_STRMZCFG(pdi->intel_alh_id));
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 136/177] ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatile

[Sasha Levin]

From: Ben Zhang <benzh@chromium.org>

[ Upstream commit eabf424f7b60246c76dcb0ea6f1e83ef9abbeaa6 ]

The codec dies when RT5677_PWR_ANLG2(MX-64h) is set to 0xACE1
while it's streaming audio over SPI. The DSP firmware turns
on PLL2 (MX-64 bit 8) when SPI streaming starts.  However regmap
does not believe that register can change by itself. When
BST1 (bit 15) is turned on with regmap_update_bits(), it doesn't
read the register first before write, so PLL2 power bit is
cleared by accident.

Marking MX-64h as volatile in regmap solved the issue.

Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191106011335.223061-6-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5677.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index 9b7a1833d3316..71b7b881df396 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -297,6 +297,7 @@ static bool rt5677_volatile_register(struct device *dev, unsigned int reg)
 	case RT5677_I2C_MASTER_CTRL7:
 	case RT5677_I2C_MASTER_CTRL8:
 	case RT5677_HAP_GENE_CTRL2:
+	case RT5677_PWR_ANLG2: /* Modified by DSP firmware */
 	case RT5677_PWR_DSP_ST:
 	case RT5677_PRIV_DATA:
 	case RT5677_ASRC_22:
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 138/177] ASoC: Intel: kbl_rt5663_rt5514_max98927: Add dmic format constraint

[Sasha Levin]

From: Yu-Hsuan Hsu <yuhsuan@chromium.org>

[ Upstream commit e2db787bdcb4f2722ecf410168f0583764634e45 ]

On KBL platform, the microphone is attached to external codec(rt5514)
instead of PCH. However, TDM slot between PCH and codec is 16 bits only.
In order to avoid setting wrong format, we should add a constraint to
force to use 16 bits format forever.

Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190923162940.199580-1-yuhsuan@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
index b8a03f58ac8cc..f36e33a147287 100644
--- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
+++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
@@ -423,6 +423,9 @@ static int kabylake_dmic_startup(struct snd_pcm_substream *substream)
 	snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS,
 			dmic_constraints);
 
+	runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;
+	snd_pcm_hw_constraint_msbits(runtime, 0, 16, 16);
+
 	return snd_pcm_hw_constraint_list(substream->runtime, 0,
 			SNDRV_PCM_HW_PARAM_RATE, &constraints_rates);
 }
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 151/177] ASoC: wm8904: fix regcache handling

[Sasha Levin]

From: Michael Walle <michael@walle.cc>

[ Upstream commit e9149b8c00d25dbaef1aa174fc604bed207e576d ]

The current code assumes that the power is turned off in
SND_SOC_BIAS_OFF. If there are no actual regulator the codec isn't
turned off and the registers are not reset to their default values but
the regcache is still marked as dirty. Thus a value might not be written
to the hardware if it is set to the default value. Do a software reset
before turning off the power to make sure the registers are always reset
to their default states.

Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191112223629.21867-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8904.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 1965635ec07c7..d14e851b91605 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -1902,6 +1902,7 @@ static int wm8904_set_bias_level(struct snd_soc_component *component,
 		snd_soc_component_update_bits(component, WM8904_BIAS_CONTROL_0,
 				    WM8904_BIAS_ENA, 0);
 
+		snd_soc_component_write(component, WM8904_SW_RESET_AND_ID, 0);
 		regcache_cache_only(wm8904->regmap, true);
 		regcache_mark_dirty(wm8904->regmap);
 
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 158/177] ASoC: wm2200: add missed operations in remove and probe failure

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit 2dab09be49a1e7a4dd13cb47d3a1441a2ef33a87 ]

This driver misses calls to pm_runtime_disable and regulator_bulk_disable
in remove and a call to free_irq in probe failure.
Add the calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191118073633.28237-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm2200.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c
index deff651615042..0a3b746fb909b 100644
--- a/sound/soc/codecs/wm2200.c
+++ b/sound/soc/codecs/wm2200.c
@@ -2413,6 +2413,8 @@ static int wm2200_i2c_probe(struct i2c_client *i2c,
 
 err_pm_runtime:
 	pm_runtime_disable(&i2c->dev);
+	if (i2c->irq)
+		free_irq(i2c->irq, wm2200);
 err_reset:
 	if (wm2200->pdata.reset)
 		gpio_set_value_cansleep(wm2200->pdata.reset, 0);
@@ -2429,12 +2431,15 @@ static int wm2200_i2c_remove(struct i2c_client *i2c)
 {
 	struct wm2200_priv *wm2200 = i2c_get_clientdata(i2c);
 
+	pm_runtime_disable(&i2c->dev);
 	if (i2c->irq)
 		free_irq(i2c->irq, wm2200);
 	if (wm2200->pdata.reset)
 		gpio_set_value_cansleep(wm2200->pdata.reset, 0);
 	if (wm2200->pdata.ldo_ena)
 		gpio_set_value_cansleep(wm2200->pdata.ldo_ena, 0);
+	regulator_bulk_disable(ARRAY_SIZE(wm2200->core_supplies),
+			       wm2200->core_supplies);
 
 	return 0;
 }
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 160/177] ASoC: wm5100: add missed pm_runtime_disable

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit b1176bbb70866f24099cd2720283c7219fb4a81c ]

The driver forgets to call pm_runtime_disable in remove and
probe failure.
Add the calls to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191118073707.28298-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm5100.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c
index ba89d9d711f76..b793701aafcda 100644
--- a/sound/soc/codecs/wm5100.c
+++ b/sound/soc/codecs/wm5100.c
@@ -2620,6 +2620,7 @@ static int wm5100_i2c_probe(struct i2c_client *i2c,
 	return ret;
 
 err_reset:
+	pm_runtime_disable(&i2c->dev);
 	if (i2c->irq)
 		free_irq(i2c->irq, wm5100);
 	wm5100_free_gpio(i2c);
@@ -2643,6 +2644,7 @@ static int wm5100_i2c_remove(struct i2c_client *i2c)
 {
 	struct wm5100_priv *wm5100 = i2c_get_clientdata(i2c);
 
+	pm_runtime_disable(&i2c->dev);
 	if (i2c->irq)
 		free_irq(i2c->irq, wm5100);
 	wm5100_free_gpio(i2c);
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 161/177] ASoC: Intel: bytcr_rt5640: Update quirk for Acer Switch 10 SW5-012 2-in-1

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 0bb887709eb16bdc4b5baddd8337abf3de72917f ]

When the Acer Switch 10 SW5-012 quirk was added we did not have
jack-detection support yet; and the builtin microphone selection of
the original quirk is wrong too.

Fix the microphone-input quirk and add jack-detection info so that the
internal-microphone and headphone/set jack on the Switch 10 work properly.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191119145138.59162-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index b6dc524830b21..6acd5dd599dc4 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -414,10 +414,12 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
 		},
-		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
-						 BYT_RT5640_MCLK_EN |
-						 BYT_RT5640_SSP0_AIF1),
-
+		.driver_data = (void *)(BYT_RT5640_DMIC1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
 	},
 	{
 		.matches = {
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel