[alsa-devel] [PATCH AUTOSEL 4.19 02/84] ASoC: max98090: remove msleep in PLL unlocked workaround

[alsa-devel] [PATCH AUTOSEL 4.19 02/84] ASoC: max98090: remove msleep in PLL unlocked workaround

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit acb874a7c049ec49d8fc66c893170fb42c01bdf7 ]

It was observed Baytrail-based chromebooks could cause continuous PLL
unlocked when using playback stream and capture stream simultaneously.
Specifically, starting a capture stream after started a playback stream.
As a result, the audio data could corrupt or turn completely silent.

As the datasheet suggested, the maximum PLL lock time should be 7 msec.
The workaround resets the codec softly by toggling SHDN off and on if
PLL failed to lock for 10 msec.  Notably, there is no suggested hold
time for SHDN off.

On Baytrail-based chromebooks, it would easily happen continuous PLL
unlocked if there is a 10 msec delay between SHDN off and on.  Removes
the msleep().

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-2-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index c3b28b2f4b10..f8c8b9decab6 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -2132,10 +2132,16 @@ static void max98090_pll_work(struct work_struct *work)
 
 	dev_info_ratelimited(component->dev, "PLL unlocked\n");
 
+	/*
+	 * As the datasheet suggested, the maximum PLL lock time should be
+	 * 7 msec.  The workaround resets the codec softly by toggling SHDN
+	 * off and on if PLL failed to lock for 10 msec.  Notably, there is
+	 * no suggested hold time for SHDN off.
+	 */
+
 	/* Toggle shutdown OFF then ON */
 	snd_soc_component_update_bits(component, M98090_REG_DEVICE_SHUTDOWN,
 			    M98090_SHDNN_MASK, 0);
-	msleep(10);
 	snd_soc_component_update_bits(component, M98090_REG_DEVICE_SHUTDOWN,
 			    M98090_SHDNN_MASK, M98090_SHDNN_MASK);
 
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 03/84] ASoC: max98090: exit workaround earlier if PLL is locked

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 6f49919d11690a9b5614445ba30fde18083fdd63 ]

According to the datasheet, PLL lock time typically takes 2 msec and
at most takes 7 msec.

Check the lock status every 1 msec and exit the workaround if PLL is
locked.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-3-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index f8c8b9decab6..172a48d42479 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -2126,6 +2126,8 @@ static void max98090_pll_work(struct work_struct *work)
 	struct max98090_priv *max98090 =
 		container_of(work, struct max98090_priv, pll_work);
 	struct snd_soc_component *component = max98090->component;
+	unsigned int pll;
+	int i;
 
 	if (!snd_soc_component_is_active(component))
 		return;
@@ -2145,8 +2147,16 @@ static void max98090_pll_work(struct work_struct *work)
 	snd_soc_component_update_bits(component, M98090_REG_DEVICE_SHUTDOWN,
 			    M98090_SHDNN_MASK, M98090_SHDNN_MASK);
 
-	/* Give PLL time to lock */
-	msleep(10);
+	for (i = 0; i < 10; ++i) {
+		/* Give PLL time to lock */
+		usleep_range(1000, 1200);
+
+		/* Check lock status */
+		pll = snd_soc_component_read32(
+				component, M98090_REG_DEVICE_STATUS);
+		if (!(pll & M98090_ULK_MASK))
+			break;
+	}
 }
 
 static void max98090_jack_work(struct work_struct *work)
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 04/84] ASoC: max98090: fix possible race conditions

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 45dfbf56975994822cce00b7475732a49f8aefed ]

max98090_interrupt() and max98090_pll_work() run in 2 different threads.
There are 2 possible races:

Note: M98090_REG_DEVICE_STATUS = 0x01.
Note: ULK == 0, PLL is locked; ULK == 1, PLL is unlocked.

max98090_interrupt      max98090_pll_work
----------------------------------------------
schedule max98090_pll_work
                        restart max98090 codec
receive ULK INT
                        assert ULK == 0
schedule max98090_pll_work (1).

In the case (1), the PLL is locked but max98090_interrupt unnecessarily
schedules another max98090_pll_work.

max98090_interrupt      max98090_pll_work      max98090 codec
----------------------------------------------------------------------
                                               ULK = 1
receive ULK INT
read 0x01
                                               ULK = 0 (clear on read)
schedule max98090_pll_work
                        restart max98090 codec
                                               ULK = 1
receive ULK INT
read 0x01
                                               ULK = 0 (clear on read)
                        read 0x01
                        assert ULK == 0 (2).

In the case (2), both max98090_interrupt and max98090_pll_work read
the same clear-on-read register.  max98090_pll_work would falsely
thought PLL is locked.
Note: the case (2) race is introduced by the previous commit ("ASoC:
max98090: exit workaround earlier if PLL is locked") to check the status
and exit the loop earlier in max98090_pll_work.

There are 2 possible solution options:
A. turn off ULK interrupt before scheduling max98090_pll_work; and turn
on again before exiting max98090_pll_work.
B. remove the second thread of execution.

Option A cannot fix the case (2) race because it still has 2 threads
access the same clear-on-read register simultaneously.  Although we
could suppose the register is volatile and read the status via I2C could
be much slower than the hardware raises the bits.

Option B introduces a maximum 10~12 msec penalty delay in the interrupt
handler.  However, it could only punish the jack detection by extra
10~12 msec.

Adopts option B which is the better solution overall.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-4-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 8 ++------
 sound/soc/codecs/max98090.h | 1 -
 2 files changed, 2 insertions(+), 7 deletions(-)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index 172a48d42479..f8cbed6cd0bf 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -2121,10 +2121,8 @@ static void max98090_pll_det_disable_work(struct work_struct *work)
 			    M98090_IULK_MASK, 0);
 }
 
-static void max98090_pll_work(struct work_struct *work)
+static void max98090_pll_work(struct max98090_priv *max98090)
 {
-	struct max98090_priv *max98090 =
-		container_of(work, struct max98090_priv, pll_work);
 	struct snd_soc_component *component = max98090->component;
 	unsigned int pll;
 	int i;
@@ -2293,7 +2291,7 @@ static irqreturn_t max98090_interrupt(int irq, void *data)
 
 	if (active & M98090_ULK_MASK) {
 		dev_dbg(component->dev, "M98090_ULK_MASK\n");
-		schedule_work(&max98090->pll_work);
+		max98090_pll_work(max98090);
 	}
 
 	if (active & M98090_JDET_MASK) {
@@ -2456,7 +2454,6 @@ static int max98090_probe(struct snd_soc_component *component)
 			  max98090_pll_det_enable_work);
 	INIT_WORK(&max98090->pll_det_disable_work,
 		  max98090_pll_det_disable_work);
-	INIT_WORK(&max98090->pll_work, max98090_pll_work);
 
 	/* Enable jack detection */
 	snd_soc_component_write(component, M98090_REG_JACK_DETECT,
@@ -2509,7 +2506,6 @@ static void max98090_remove(struct snd_soc_component *component)
 	cancel_delayed_work_sync(&max98090->jack_work);
 	cancel_delayed_work_sync(&max98090->pll_det_enable_work);
 	cancel_work_sync(&max98090->pll_det_disable_work);
-	cancel_work_sync(&max98090->pll_work);
 	max98090->component = NULL;
 }
 
diff --git a/sound/soc/codecs/max98090.h b/sound/soc/codecs/max98090.h
index b1572a2d19da..388d2f74674b 100644
--- a/sound/soc/codecs/max98090.h
+++ b/sound/soc/codecs/max98090.h
@@ -1533,7 +1533,6 @@ struct max98090_priv {
 	struct delayed_work jack_work;
 	struct delayed_work pll_det_enable_work;
 	struct work_struct pll_det_disable_work;
-	struct work_struct pll_work;
 	struct snd_soc_jack *jack;
 	unsigned int dai_fmt;
 	int tdm_slots;
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 11/84] ASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 7eccc05c7101f34cc36afe9405d15de6d4099fb4 ]

When the Teclast X89 quirk was added we did not have jack-detection
support yet.

Note the over-current detection limit is set to 2mA instead of the usual
1.5mA because this tablet tends to give false-positive button-presses
when it is set to 1.5mA.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191203221442.2657-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index b6dc524830b2..35983eae584a 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -675,13 +675,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_MCLK_EN),
 	},
 	{
+		/* Teclast X89 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
 			DMI_MATCH(DMI_BOARD_NAME, "tPAD"),
 		},
 		.driver_data = (void *)(BYT_RT5640_IN3_MAP |
-					BYT_RT5640_MCLK_EN |
-					BYT_RT5640_SSP0_AIF1),
+					BYT_RT5640_JD_SRC_JD1_IN4P |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_1P0 |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
 	},
 	{	/* Toshiba Satellite Click Mini L9W-B */
 		.matches = {
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 30/84] ASoC: topology: Check return value for soc_tplg_pcm_create()

[Sasha Levin]

From: Dragos Tarcatu <dragos_tarcatu@mentor.com>

[ Upstream commit a3039aef52d9ffeb67e9211899cd3e8a2953a01f ]

The return value of soc_tplg_pcm_create() is currently not checked
in soc_tplg_pcm_elems_load(). If an error is to occur there, the
topology ignores it and continues loading.

Fix that by checking the status and rejecting the topology on error.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 88a7e860b175..069f38fbf07b 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1890,6 +1890,7 @@ static int soc_tplg_pcm_elems_load(struct soc_tplg *tplg,
 	int count = hdr->count;
 	int i;
 	bool abi_match;
+	int ret;
 
 	if (tplg->pass != SOC_TPLG_PASS_PCM_DAI)
 		return 0;
@@ -1926,7 +1927,12 @@ static int soc_tplg_pcm_elems_load(struct soc_tplg *tplg,
 		}
 
 		/* create the FE DAIs and DAI links */
-		soc_tplg_pcm_create(tplg, _pcm);
+		ret = soc_tplg_pcm_create(tplg, _pcm);
+		if (ret < 0) {
+			if (!abi_match)
+				kfree(_pcm);
+			return ret;
+		}
 
 		/* offset by version-specific struct size and
 		 * real priv data size
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.19 59/84] ASoC: wm8962: fix lambda value

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 556672d75ff486e0b6786056da624131679e0576 ]

According to user manual, it is required that FLL_LAMBDA > 0
in all cases (Integer and Franctional modes).

Fixes: 9a76f1ff6e29 ("ASoC: Add initial WM8962 CODEC driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1576065442-19763-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index efd8910b1ff7..dde015fd70a4 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2792,7 +2792,7 @@ static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 
 	if (target % Fref == 0) {
 		fll_div->theta = 0;
-		fll_div->lambda = 0;
+		fll_div->lambda = 1;
 	} else {
 		gcd_fll = gcd(target, fratio * Fref);
 
@@ -2862,7 +2862,7 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 		return -EINVAL;
 	}
 
-	if (fll_div.theta || fll_div.lambda)
+	if (fll_div.theta)
 		fll1 |= WM8962_FLL_FRAC;
 
 	/* Stop the FLL while we reconfigure */
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel