From: Takashi Iwai <tiwai@suse.de>
To: alsa-devel@alsa-project.org
Cc: Matwey Kornilov <matwey.kornilov@gmail.com>,
Dylan Robinson <dylan_robinson@motu.com>,
Keith Milner <kamilner@superlative.org>
Subject: [PATCH 29/41] ALSA: usb-audio: Refactoring endpoint URB deactivation
Date: Mon, 23 Nov 2020 09:53:35 +0100 [thread overview]
Message-ID: <20201123085347.19667-30-tiwai@suse.de> (raw)
In-Reply-To: <20201123085347.19667-1-tiwai@suse.de>
Minor code refactoring to consolidate the URB deactivation code in
endpoint.c. A slight behavior change is that the error handling in
snd_usb_endpoint_start() leaves EP_FLAG_STOPPING now. This should be
synced with the later PCM sync_stop callback.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
sound/usb/endpoint.c | 41 +++++++++++++++++++++++------------------
1 file changed, 23 insertions(+), 18 deletions(-)
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 4d733b2d8287..35c84c2264e1 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -777,6 +777,9 @@ static int wait_clear_urbs(struct snd_usb_endpoint *ep)
unsigned long end_time = jiffies + msecs_to_jiffies(1000);
int alive;
+ if (!test_bit(EP_FLAG_STOPPING, &ep->flags))
+ return 0;
+
do {
alive = bitmap_weight(&ep->active_mask, ep->nurbs);
if (!alive)
@@ -802,22 +805,31 @@ static int wait_clear_urbs(struct snd_usb_endpoint *ep)
*/
void snd_usb_endpoint_sync_pending_stop(struct snd_usb_endpoint *ep)
{
- if (ep && test_bit(EP_FLAG_STOPPING, &ep->flags))
+ if (ep)
wait_clear_urbs(ep);
}
/*
- * unlink active urbs.
+ * Stop and unlink active urbs.
+ *
+ * This function checks and clears EP_FLAG_RUNNING state.
+ * When @wait_sync is set, it waits until all pending URBs are killed.
*/
-static int deactivate_urbs(struct snd_usb_endpoint *ep, bool force)
+static int stop_and_unlink_urbs(struct snd_usb_endpoint *ep, bool force,
+ bool wait_sync)
{
unsigned int i;
if (!force && atomic_read(&ep->chip->shutdown)) /* to be sure... */
return -EBADFD;
- clear_bit(EP_FLAG_RUNNING, &ep->flags);
+ if (atomic_read(&ep->running))
+ return -EBUSY;
+
+ if (!test_and_clear_bit(EP_FLAG_RUNNING, &ep->flags))
+ goto out;
+ set_bit(EP_FLAG_STOPPING, &ep->flags);
INIT_LIST_HEAD(&ep->ready_playback_urbs);
ep->next_packet_head = 0;
ep->next_packet_queued = 0;
@@ -831,6 +843,9 @@ static int deactivate_urbs(struct snd_usb_endpoint *ep, bool force)
}
}
+ out:
+ if (wait_sync)
+ return wait_clear_urbs(ep);
return 0;
}
@@ -845,8 +860,7 @@ static void release_urbs(struct snd_usb_endpoint *ep, int force)
snd_usb_endpoint_set_callback(ep, NULL, NULL, NULL);
/* stop urbs */
- deactivate_urbs(ep, force);
- wait_clear_urbs(ep);
+ stop_and_unlink_urbs(ep, force, true);
for (i = 0; i < ep->nurbs; i++)
release_urb_ctx(&ep->urb[i]);
@@ -1261,9 +1275,6 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
if (atomic_inc_return(&ep->running) != 1)
return 0;
- /* just to be sure */
- deactivate_urbs(ep, false);
-
ep->active_mask = 0;
ep->unlink_mask = 0;
ep->phase = 0;
@@ -1317,11 +1328,7 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep)
return 0;
__error:
- if (ep->sync_master)
- WRITE_ONCE(ep->sync_master->sync_slave, NULL);
- clear_bit(EP_FLAG_RUNNING, &ep->flags);
- atomic_dec(&ep->running);
- deactivate_urbs(ep, false);
+ snd_usb_endpoint_stop(ep);
return -EPIPE;
}
@@ -1354,10 +1361,8 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep)
if (ep->sync_master)
WRITE_ONCE(ep->sync_master->sync_slave, NULL);
- if (!atomic_dec_return(&ep->running)) {
- deactivate_urbs(ep, false);
- set_bit(EP_FLAG_STOPPING, &ep->flags);
- }
+ if (!atomic_dec_return(&ep->running))
+ stop_and_unlink_urbs(ep, false, false);
}
/**
--
2.16.4
next prev parent reply other threads:[~2020-11-23 9:05 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-23 8:53 [PATCH 00/41] USB audio refactoring for better implicit feedback support Takashi Iwai
2020-11-23 8:53 ` [PATCH 01/41] ALSA: usb-audio: Handle discrete rates properly in hw constraints Takashi Iwai
2020-11-23 8:53 ` [PATCH 02/41] ALSA: usb-audio: Don't call usb_set_interface() at trigger callback Takashi Iwai
2020-11-23 8:53 ` [PATCH 03/41] ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3 Takashi Iwai
2020-11-23 8:53 ` [PATCH 04/41] ALSA: usb-audio: Check implicit feedback EP generically for UAC2 Takashi Iwai
2020-11-23 8:53 ` [PATCH 05/41] ALSA: usb-audio: Add snd_usb_get_endpoint() helper Takashi Iwai
2020-11-23 8:53 ` [PATCH 06/41] ALSA: usb-audio: Set and clear sync EP link properly Takashi Iwai
2020-11-23 8:53 ` [PATCH 07/41] ALSA: usb-audio: Improve some debug prints Takashi Iwai
2020-11-23 8:53 ` [PATCH 08/41] ALSA: usb-audio: Track implicit fb sync endpoint in audioformat list Takashi Iwai
2020-11-23 8:53 ` [PATCH 09/41] ALSA: usb-audio: Move snd_usb_autoresume() call out of setup_hw_info() Takashi Iwai
2020-11-23 8:53 ` [PATCH 10/41] ALSA: usb-audio: Add hw constraint for implicit fb sync Takashi Iwai
2020-11-23 8:53 ` [PATCH 11/41] ALSA: usb-audio: Simplify hw_params rules Takashi Iwai
2020-11-23 8:53 ` [PATCH 12/41] ALSA: usb-audio: Drop debug.h Takashi Iwai
2020-11-23 8:53 ` [PATCH 13/41] ALSA: usb-audio: Avoid doubly initialization for implicit fb Takashi Iwai
2020-11-23 8:53 ` [PATCH 14/41] ALSA: usb-audio: Create endpoint objects at parsing phase Takashi Iwai
2021-01-03 17:09 ` [PATCH 14/41] ALSA: usb-audio: Create endpoint objects at parsing phase - Pioneer DJ DJM-250MK2 stopped working František Kučera
2021-01-03 17:19 ` Takashi Iwai
2021-01-03 18:15 ` František Kučera
2021-01-05 9:29 ` Takashi Iwai
2021-01-05 13:20 ` Takashi Iwai
2021-01-05 22:27 ` František Kučera
2021-01-06 9:03 ` Takashi Iwai
2021-01-06 19:01 ` František Kučera
2021-01-07 13:30 ` Takashi Iwai
2020-11-23 8:53 ` [PATCH 15/41] ALSA: usb-audio: Drop keep_interface flag again Takashi Iwai
2020-11-23 8:53 ` [PATCH 16/41] ALSA: usb-audio: Add snd_usb_get_host_interface() helper Takashi Iwai
2020-11-23 8:53 ` [PATCH 17/41] ALSA: usb-audio: Don't set altsetting before initializing sample rate Takashi Iwai
2020-11-23 8:53 ` [PATCH 18/41] ALSA: usb-audio: Pass snd_usb_audio object to quirk functions Takashi Iwai
2020-11-23 8:53 ` [PATCH 19/41] ALSA: usb-audio: Simplify snd_usb_init_sample_rate() arguments Takashi Iwai
2020-11-23 8:53 ` [PATCH 20/41] ALSA: usb-audio: Simplify snd_usb_init_pitch() arguments Takashi Iwai
2020-11-23 8:53 ` [PATCH 21/41] ALSA: usb-audio: Stop both endpoints properly at error Takashi Iwai
2020-11-23 8:53 ` [PATCH 22/41] ALSA: usb-audio: Set callbacks via snd_usb_endpoint_set_callback() Takashi Iwai
2020-11-23 8:53 ` [PATCH 23/41] ALSA: usb-audio: Always set up the parameters after resume Takashi Iwai
2020-11-23 8:53 ` [PATCH 24/41] ALSA: usb-audio: Fix EP matching for continuous rates Takashi Iwai
2020-11-23 8:53 ` [PATCH 25/41] ALSA: usb-audio: Refactor endpoint management Takashi Iwai
2020-11-23 8:53 ` [PATCH 26/41] ALSA: usb-audio: Fix possible stall of implicit fb packet ring-buffer Takashi Iwai
2020-11-23 8:53 ` [PATCH 27/41] ALSA: usb-audio: Constify audioformat pointer references Takashi Iwai
2020-11-23 8:53 ` [PATCH 28/41] ALSA: usb-audio: Use atomic_t for endpoint use_count Takashi Iwai
2020-11-23 8:53 ` Takashi Iwai [this message]
2020-11-23 8:53 ` [PATCH 30/41] ALSA: usb-audio: Drop unneeded snd_usb_substream fields Takashi Iwai
2020-11-23 8:53 ` [PATCH 31/41] ALSA: usb-audio: Unify the code for the next packet size calculation Takashi Iwai
2020-11-23 8:53 ` [PATCH 32/41] ALSA: usb-audio: Simplify rate_min/max and rates set up Takashi Iwai
2020-11-23 8:53 ` [PATCH 33/41] ALSA: usb-audio: Replace slave/master terms Takashi Iwai
2020-11-23 8:53 ` [PATCH 34/41] ALSA: usb-audio: Use unsigned char for iface and altsettings fields Takashi Iwai
2020-11-23 8:53 ` [PATCH 35/41] ALSA: usb-audio: Show sync endpoint information in proc outputs Takashi Iwai
2020-11-23 8:53 ` [PATCH 36/41] ALSA: usb-audio: Quirk for BOSS GT-001 Takashi Iwai
2020-11-23 8:53 ` [PATCH 37/41] ALSA: usb-audio: Factor out the implicit feedback quirk code Takashi Iwai
2020-11-23 8:53 ` [PATCH 38/41] ALSA: usb-audio: Add generic implicit fb parsing Takashi Iwai
2020-11-23 8:53 ` [PATCH 39/41] ALSA: usb-audio: Add implicit_fb module option Takashi Iwai
2020-11-23 9:46 ` Pavel Hofman
2020-11-23 8:53 ` [PATCH 40/41] ALSA: usb-audio: Fix quirks for other BOSS devices Takashi Iwai
2020-11-23 8:53 ` [PATCH 41/41] ALSA: usb-audio: Fix MOTU M-Series quirks Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201123085347.19667-30-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=dylan_robinson@motu.com \
--cc=kamilner@superlative.org \
--cc=matwey.kornilov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox