From: Takashi Iwai <tiwai@suse.de>
To: "František Kučera" <konference@frantovo.cz>
Cc: alsa-devel@alsa-project.org,
Matwey Kornilov <matwey.kornilov@gmail.com>,
Dylan Robinson <dylan_robinson@motu.com>,
Keith Milner <kamilner@superlative.org>
Subject: Re: [PATCH 14/41] ALSA: usb-audio: Create endpoint objects at parsing phase - Pioneer DJ DJM-250MK2 stopped working
Date: Tue, 05 Jan 2021 14:20:35 +0100 [thread overview]
Message-ID: <s5hble35xlo.wl-tiwai@suse.de> (raw)
In-Reply-To: <s5him8b7mvf.wl-tiwai@suse.de>
On Tue, 05 Jan 2021 10:29:24 +0100,
Takashi Iwai wrote:
>
> On Sun, 03 Jan 2021 19:15:48 +0100,
> František Kučera wrote:
> >
> > Dne 03. 01. 21 v 18:19 Takashi Iwai napsal(a):
> > > Could you give lsusb -v output as well as /proc/asound/card*/usbmixer
> > > and stream* files? The proc files are at best from both older and new
> > > kernels.
> >
> > Here are the files. They look same. The only difference is in the stream0, but it is probably only formatting. I also attached the kern.log from the new version.
>
> Thanks.
>
> It must be something specific to the devices with the fixed stream
> qurik. Could you try the patch below?
Scratch that. The call of snd_usb_add_endpoint() is needed explicitly
now at the quirk itself.
Below is the v2 patch. Please give it a try.
thanks,
Takashi
-- 8< --
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -120,6 +120,38 @@ static int create_standard_audio_quirk(struct snd_usb_audio *chip,
return 0;
}
+static int add_audio_stream_from_fixed_fmt(struct snd_usb_audio *chip,
+ struct audioformat *fp)
+{
+ int stream, err;
+
+ stream = (fp->endpoint & USB_DIR_IN) ?
+ SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
+
+ snd_usb_audioformat_set_sync_ep(chip, fp);
+
+ err = snd_usb_add_audio_stream(chip, stream, fp);
+ if (err < 0)
+ return err;
+
+ /* add endpoints */
+ err = snd_usb_add_endpoint(chip, fp->endpoint,
+ SND_USB_ENDPOINT_TYPE_DATA);
+ if (err < 0)
+ return err;
+
+ if (fp->sync_ep) {
+ err = snd_usb_add_endpoint(chip, fp->sync_ep,
+ fp->implicit_fb ?
+ SND_USB_ENDPOINT_TYPE_DATA :
+ SND_USB_ENDPOINT_TYPE_SYNC);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
/*
* create a stream for an endpoint/altsetting without proper descriptors
*/
@@ -131,8 +163,8 @@ static int create_fixed_stream_quirk(struct snd_usb_audio *chip,
struct audioformat *fp;
struct usb_host_interface *alts;
struct usb_interface_descriptor *altsd;
- int stream, err;
unsigned *rate_table = NULL;
+ int err;
fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
if (!fp)
@@ -153,11 +185,6 @@ static int create_fixed_stream_quirk(struct snd_usb_audio *chip,
fp->rate_table = rate_table;
}
- stream = (fp->endpoint & USB_DIR_IN)
- ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
- err = snd_usb_add_audio_stream(chip, stream, fp);
- if (err < 0)
- goto error;
if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber ||
fp->altset_idx >= iface->num_altsetting) {
err = -EINVAL;
@@ -176,6 +203,11 @@ static int create_fixed_stream_quirk(struct snd_usb_audio *chip,
fp->datainterval = snd_usb_parse_datainterval(chip, alts);
if (fp->maxpacksize == 0)
fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
+
+ err = add_audio_stream_from_fixed_fmt(chip, fp);
+ if (err < 0)
+ goto error;
+
usb_set_interface(chip->dev, fp->iface, 0);
snd_usb_init_pitch(chip, fp);
snd_usb_init_sample_rate(chip, fp, fp->rate_max);
@@ -417,7 +449,7 @@ static int create_uaxx_quirk(struct snd_usb_audio *chip,
struct usb_host_interface *alts;
struct usb_interface_descriptor *altsd;
struct audioformat *fp;
- int stream, err;
+ int err;
/* both PCM and MIDI interfaces have 2 or more altsettings */
if (iface->num_altsetting < 2)
@@ -482,9 +514,7 @@ static int create_uaxx_quirk(struct snd_usb_audio *chip,
return -ENXIO;
}
- stream = (fp->endpoint & USB_DIR_IN)
- ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
- err = snd_usb_add_audio_stream(chip, stream, fp);
+ err = add_audio_stream_from_fixed_fmt(chip, fp);
if (err < 0) {
list_del(&fp->list); /* unlink for avoiding double-free */
kfree(fp);
next prev parent reply other threads:[~2021-01-05 13:21 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-23 8:53 [PATCH 00/41] USB audio refactoring for better implicit feedback support Takashi Iwai
2020-11-23 8:53 ` [PATCH 01/41] ALSA: usb-audio: Handle discrete rates properly in hw constraints Takashi Iwai
2020-11-23 8:53 ` [PATCH 02/41] ALSA: usb-audio: Don't call usb_set_interface() at trigger callback Takashi Iwai
2020-11-23 8:53 ` [PATCH 03/41] ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3 Takashi Iwai
2020-11-23 8:53 ` [PATCH 04/41] ALSA: usb-audio: Check implicit feedback EP generically for UAC2 Takashi Iwai
2020-11-23 8:53 ` [PATCH 05/41] ALSA: usb-audio: Add snd_usb_get_endpoint() helper Takashi Iwai
2020-11-23 8:53 ` [PATCH 06/41] ALSA: usb-audio: Set and clear sync EP link properly Takashi Iwai
2020-11-23 8:53 ` [PATCH 07/41] ALSA: usb-audio: Improve some debug prints Takashi Iwai
2020-11-23 8:53 ` [PATCH 08/41] ALSA: usb-audio: Track implicit fb sync endpoint in audioformat list Takashi Iwai
2020-11-23 8:53 ` [PATCH 09/41] ALSA: usb-audio: Move snd_usb_autoresume() call out of setup_hw_info() Takashi Iwai
2020-11-23 8:53 ` [PATCH 10/41] ALSA: usb-audio: Add hw constraint for implicit fb sync Takashi Iwai
2020-11-23 8:53 ` [PATCH 11/41] ALSA: usb-audio: Simplify hw_params rules Takashi Iwai
2020-11-23 8:53 ` [PATCH 12/41] ALSA: usb-audio: Drop debug.h Takashi Iwai
2020-11-23 8:53 ` [PATCH 13/41] ALSA: usb-audio: Avoid doubly initialization for implicit fb Takashi Iwai
2020-11-23 8:53 ` [PATCH 14/41] ALSA: usb-audio: Create endpoint objects at parsing phase Takashi Iwai
2021-01-03 17:09 ` [PATCH 14/41] ALSA: usb-audio: Create endpoint objects at parsing phase - Pioneer DJ DJM-250MK2 stopped working František Kučera
2021-01-03 17:19 ` Takashi Iwai
2021-01-03 18:15 ` František Kučera
2021-01-05 9:29 ` Takashi Iwai
2021-01-05 13:20 ` Takashi Iwai [this message]
2021-01-05 22:27 ` František Kučera
2021-01-06 9:03 ` Takashi Iwai
2021-01-06 19:01 ` František Kučera
2021-01-07 13:30 ` Takashi Iwai
2020-11-23 8:53 ` [PATCH 15/41] ALSA: usb-audio: Drop keep_interface flag again Takashi Iwai
2020-11-23 8:53 ` [PATCH 16/41] ALSA: usb-audio: Add snd_usb_get_host_interface() helper Takashi Iwai
2020-11-23 8:53 ` [PATCH 17/41] ALSA: usb-audio: Don't set altsetting before initializing sample rate Takashi Iwai
2020-11-23 8:53 ` [PATCH 18/41] ALSA: usb-audio: Pass snd_usb_audio object to quirk functions Takashi Iwai
2020-11-23 8:53 ` [PATCH 19/41] ALSA: usb-audio: Simplify snd_usb_init_sample_rate() arguments Takashi Iwai
2020-11-23 8:53 ` [PATCH 20/41] ALSA: usb-audio: Simplify snd_usb_init_pitch() arguments Takashi Iwai
2020-11-23 8:53 ` [PATCH 21/41] ALSA: usb-audio: Stop both endpoints properly at error Takashi Iwai
2020-11-23 8:53 ` [PATCH 22/41] ALSA: usb-audio: Set callbacks via snd_usb_endpoint_set_callback() Takashi Iwai
2020-11-23 8:53 ` [PATCH 23/41] ALSA: usb-audio: Always set up the parameters after resume Takashi Iwai
2020-11-23 8:53 ` [PATCH 24/41] ALSA: usb-audio: Fix EP matching for continuous rates Takashi Iwai
2020-11-23 8:53 ` [PATCH 25/41] ALSA: usb-audio: Refactor endpoint management Takashi Iwai
2020-11-23 8:53 ` [PATCH 26/41] ALSA: usb-audio: Fix possible stall of implicit fb packet ring-buffer Takashi Iwai
2020-11-23 8:53 ` [PATCH 27/41] ALSA: usb-audio: Constify audioformat pointer references Takashi Iwai
2020-11-23 8:53 ` [PATCH 28/41] ALSA: usb-audio: Use atomic_t for endpoint use_count Takashi Iwai
2020-11-23 8:53 ` [PATCH 29/41] ALSA: usb-audio: Refactoring endpoint URB deactivation Takashi Iwai
2020-11-23 8:53 ` [PATCH 30/41] ALSA: usb-audio: Drop unneeded snd_usb_substream fields Takashi Iwai
2020-11-23 8:53 ` [PATCH 31/41] ALSA: usb-audio: Unify the code for the next packet size calculation Takashi Iwai
2020-11-23 8:53 ` [PATCH 32/41] ALSA: usb-audio: Simplify rate_min/max and rates set up Takashi Iwai
2020-11-23 8:53 ` [PATCH 33/41] ALSA: usb-audio: Replace slave/master terms Takashi Iwai
2020-11-23 8:53 ` [PATCH 34/41] ALSA: usb-audio: Use unsigned char for iface and altsettings fields Takashi Iwai
2020-11-23 8:53 ` [PATCH 35/41] ALSA: usb-audio: Show sync endpoint information in proc outputs Takashi Iwai
2020-11-23 8:53 ` [PATCH 36/41] ALSA: usb-audio: Quirk for BOSS GT-001 Takashi Iwai
2020-11-23 8:53 ` [PATCH 37/41] ALSA: usb-audio: Factor out the implicit feedback quirk code Takashi Iwai
2020-11-23 8:53 ` [PATCH 38/41] ALSA: usb-audio: Add generic implicit fb parsing Takashi Iwai
2020-11-23 8:53 ` [PATCH 39/41] ALSA: usb-audio: Add implicit_fb module option Takashi Iwai
2020-11-23 9:46 ` Pavel Hofman
2020-11-23 8:53 ` [PATCH 40/41] ALSA: usb-audio: Fix quirks for other BOSS devices Takashi Iwai
2020-11-23 8:53 ` [PATCH 41/41] ALSA: usb-audio: Fix MOTU M-Series quirks Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hble35xlo.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=dylan_robinson@motu.com \
--cc=kamilner@superlative.org \
--cc=konference@frantovo.cz \
--cc=matwey.kornilov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox