[PATCH AUTOSEL 5.4 31/40] ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr()

[PATCH AUTOSEL 5.4 31/40] ASoC: Intel: Add DMI quirk table to soc_intel_is_byt_cr()

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 8ade6d8b02b1ead741bd4f6c42921035caab6560 ]

Some Bay Trail systems:
1. Use a non CR version of the Bay Trail SoC
2. Contain at least 6 interrupt resources so that the
   platform_get_resource(pdev, IORESOURCE_IRQ, 5) check to workaround
   non CR systems which list their IPC IRQ at index 0 despite being
   non CR does not work
3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5

Add a DMI quirk table to check for the few known models with this issue,
so that the right IPC IRQ index is used on these systems.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210120214957.140232-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/common/soc-intel-quirks.h | 25 +++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/sound/soc/intel/common/soc-intel-quirks.h b/sound/soc/intel/common/soc-intel-quirks.h
index 863a477d34051..645baf0ed3dd1 100644
--- a/sound/soc/intel/common/soc-intel-quirks.h
+++ b/sound/soc/intel/common/soc-intel-quirks.h
@@ -11,6 +11,7 @@
 
 #if IS_ENABLED(CONFIG_X86)
 
+#include <linux/dmi.h>
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
 #include <asm/iosf_mbi.h>
@@ -40,12 +41,36 @@ SOC_INTEL_IS_CPU(cml, INTEL_FAM6_KABYLAKE_L);
 
 static inline bool soc_intel_is_byt_cr(struct platform_device *pdev)
 {
+	/*
+	 * List of systems which:
+	 * 1. Use a non CR version of the Bay Trail SoC
+	 * 2. Contain at least 6 interrupt resources so that the
+	 *    platform_get_resource(pdev, IORESOURCE_IRQ, 5) check below
+	 *    succeeds
+	 * 3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5
+	 *
+	 * This needs to be here so that it can be shared between the SST and
+	 * SOF drivers. We rely on the compiler to optimize this out in files
+	 * where soc_intel_is_byt_cr is not used.
+	 */
+	static const struct dmi_system_id force_bytcr_table[] = {
+		{	/* Lenovo Yoga Tablet 2 series */
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+				DMI_MATCH(DMI_PRODUCT_FAMILY, "YOGATablet2"),
+			},
+		},
+		{}
+	};
 	struct device *dev = &pdev->dev;
 	int status = 0;
 
 	if (!soc_intel_is_byt())
 		return false;
 
+	if (dmi_check_system(force_bytcr_table))
+		return true;
+
 	if (iosf_mbi_available()) {
 		u32 bios_status;
 
-- 
2.27.0

[PATCH AUTOSEL 5.4 37/40] ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit bdea43fc0436c9e98fdfe151c2ed8a3fc7277404 ]

The Estar Beauty HD MID 7316R tablet almost fully works with out default
settings. The only problem is that it has only 1 speaker so any sounds
only playing on the right channel get lost.

Add a quirk for this model using the default settings + MONO_SPEAKER.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 6012367f6fe48..cdbc00c773386 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -513,6 +513,16 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_MONO_SPEAKER |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Estar Beauty HD MID 7316R */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Estar"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "eSTAR BEAUTY HD Intel Quad core"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_MONO_SPEAKER |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-- 
2.27.0

[PATCH AUTOSEL 5.4 38/40] ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit e1317cc9ca4ac20262895fddb065ffda4fc29cfb ]

The Voyo Winpad A15 tablet uses a Bay Trail (non CR) SoC, so it is using
SSP2 (AIF1) and it mostly works with the defaults. But instead of using
DMIC1 it is using an analog mic on IN1, add a quirk for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index cdbc00c773386..00e8d589a7246 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -786,6 +786,20 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF2 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Voyo Winpad A15 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			/* Above strings are too generic, also match on BIOS date */
+			DMI_MATCH(DMI_BIOS_DATE, "11/20/2014"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_MCLK_EN),
+	},
 	{	/* Catch-all for generic Insyde tablets, must be last */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
-- 
2.27.0

[PATCH AUTOSEL 5.4 39/40] ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit df8359c512fa770ffa6b0b0309807d9b9825a47f ]

Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has
a jack-detect switch which reads 1/high when a jack is inserted,
rather then using the standard active-low setup which most
jack-detect switches use. All other settings are using the defaults.

Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV
flags for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 4606f6f582d6f..921c09cdb4800 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -435,6 +435,19 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = {
 					BYT_RT5651_SSP0_AIF1 |
 					BYT_RT5651_MONO_SPEAKER),
 	},
+	{
+		/* Jumper EZpad 7 */
+		.callback = byt_rt5651_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+			/* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */
+			DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"),
+		},
+		.driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS |
+					BYT_RT5651_IN2_MAP |
+					BYT_RT5651_JD_NOT_INV),
+	},
 	{
 		/* KIANO SlimNote 14.2 */
 		.callback = byt_rt5651_quirk_cb,
-- 
2.27.0

[PATCH AUTOSEL 5.4 40/40] ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit c58947af08aedbdee0fce5ea6e6bf3e488ae0e2c ]

The Acer One S1002 tablet is using an analog mic on IN1 and has
its jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.

Note it is also using AIF2 instead of AIF1 which is somewhat unusual,
this is correctly advertised in the ACPI CHAN package, so the speakers
do work without the quirk.

Add a quirk for the mic and jack-detect settings.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210216213555.36555-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 00e8d589a7246..9ee610504bac9 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -400,6 +400,19 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{	/* Acer One 10 S1002 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "One S1002"),
+		},
+		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+					BYT_RT5640_JD_SRC_JD2_IN4N |
+					BYT_RT5640_OVCD_TH_2000UA |
+					BYT_RT5640_OVCD_SF_0P75 |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_SSP0_AIF2 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
-- 
2.27.0