[PATCH AUTOSEL 5.11 09/44] ASoC: rt1015: fix i2c communication error

[PATCH AUTOSEL 5.11 09/44] ASoC: rt1015: fix i2c communication error

[Sasha Levin]

From: Jack Yu <jack.yu@realtek.com>

[ Upstream commit 9e0bdaa9fcb8c64efc1487a7fba07722e7bc515e ]

Remove 0x100 cache re-sync to solve i2c communication error.

Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20210222090057.29532-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt1015.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/rt1015.c b/sound/soc/codecs/rt1015.c
index 32e6bcf763d1..4607039a16e7 100644
--- a/sound/soc/codecs/rt1015.c
+++ b/sound/soc/codecs/rt1015.c
@@ -209,6 +209,7 @@ static bool rt1015_volatile_register(struct device *dev, unsigned int reg)
 	case RT1015_VENDOR_ID:
 	case RT1015_DEVICE_ID:
 	case RT1015_PRO_ALT:
+	case RT1015_MAN_I2C:
 	case RT1015_DAC3:
 	case RT1015_VBAT_TEST_OUT1:
 	case RT1015_VBAT_TEST_OUT2:
-- 
2.30.1

[PATCH AUTOSEL 5.11 10/44] ASoC: rt5640: Fix dac- and adc- vol-tlv values being off by a factor of 10

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit cfa26ed1f9f885c2fd8f53ca492989d1e16d0199 ]

The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.

E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.

Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.

Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc-
vol-tlv values being off by a factor of 10") which made the exact same
change to the rt5670 codec driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210226143817.84287-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5640.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c
index 1414ad15d01c..a5674c227b3a 100644
--- a/sound/soc/codecs/rt5640.c
+++ b/sound/soc/codecs/rt5640.c
@@ -339,9 +339,9 @@ static bool rt5640_readable_register(struct device *dev, unsigned int reg)
 }
 
 static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0);
-static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0);
+static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -6562, 0);
 static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0);
-static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0);
+static const DECLARE_TLV_DB_MINMAX(adc_vol_tlv, -1762, 3000);
 static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0);
 
 /* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */
-- 
2.30.1

[PATCH AUTOSEL 5.11 11/44] ASoC: rt5651: Fix dac- and adc- vol-tlv values being off by a factor of 10

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit eee51df776bd6cac10a76b2779a9fdee3f622b2b ]

The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.

E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.

Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.

Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc-
vol-tlv values being off by a factor of 10") which made the exact same
change to the rt5670 codec driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210226143817.84287-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5651.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c
index d198e191fb0c..e59fdc81dbd4 100644
--- a/sound/soc/codecs/rt5651.c
+++ b/sound/soc/codecs/rt5651.c
@@ -285,9 +285,9 @@ static bool rt5651_readable_register(struct device *dev, unsigned int reg)
 }
 
 static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0);
-static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0);
+static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -6562, 0);
 static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0);
-static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0);
+static const DECLARE_TLV_DB_MINMAX(adc_vol_tlv, -1762, 3000);
 static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0);
 
 /* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */
-- 
2.30.1

[PATCH AUTOSEL 5.11 12/44] ASoC: sgtl5000: set DAP_AVC_CTRL register to correct default value on probe

[Sasha Levin]

From: Benjamin Rood <benjaminjrood@gmail.com>

[ Upstream commit f86f58e3594fb0ab1993d833d3b9a2496f3c928c ]

According to the SGTL5000 datasheet [1], the DAP_AVC_CTRL register has
the following bit field definitions:

| BITS  | FIELD       | RW | RESET | DEFINITION                        |
| 15    | RSVD        | RO | 0x0   | Reserved                          |
| 14    | RSVD        | RW | 0x1   | Reserved                          |
| 13:12 | MAX_GAIN    | RW | 0x1   | Max Gain of AVC in expander mode  |
| 11:10 | RSVD        | RO | 0x0   | Reserved                          |
| 9:8   | LBI_RESP    | RW | 0x1   | Integrator Response               |
| 7:6   | RSVD        | RO | 0x0   | Reserved                          |
| 5     | HARD_LMT_EN | RW | 0x0   | Enable hard limiter mode          |
| 4:1   | RSVD        | RO | 0x0   | Reserved                          |
| 0     | EN          | RW | 0x0   | Enable/Disable AVC                |

The original default value written to the DAP_AVC_CTRL register during
sgtl5000_i2c_probe() was 0x0510.  This would incorrectly write values to
bits 4 and 10, which are defined as RESERVED.  It would also not set
bits 12 and 14 to their correct RESET values of 0x1, and instead set
them to 0x0.  While the DAP_AVC module is effectively disabled because
the EN bit is 0, this default value is still writing invalid values to
registers that are marked as read-only and RESERVED as well as not
setting bits 12 and 14 to their correct default values as defined by the
datasheet.

The correct value that should be written to the DAP_AVC_CTRL register is
0x5100, which configures the register bits to the default values defined
by the datasheet, and prevents any writes to bits defined as
'read-only'.  Generally speaking, it is best practice to NOT attempt to
write values to registers/bits defined as RESERVED, as it generally
produces unwanted/undefined behavior, or errors.

Also, all credit for this patch should go to my colleague Dan MacDonald
<dmacdonald@curbellmedical.com> for finding this error in the first
place.

[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf

Signed-off-by: Benjamin Rood <benjaminjrood@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210219183308.GA2117@ubuntu-dev
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/sgtl5000.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 4d6ff8114622..4c0e87e22b97 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -71,7 +71,7 @@ static const struct reg_default sgtl5000_reg_defaults[] = {
 	{ SGTL5000_DAP_EQ_BASS_BAND4,		0x002f },
 	{ SGTL5000_DAP_MAIN_CHAN,		0x8000 },
 	{ SGTL5000_DAP_MIX_CHAN,		0x0000 },
-	{ SGTL5000_DAP_AVC_CTRL,		0x0510 },
+	{ SGTL5000_DAP_AVC_CTRL,		0x5100 },
 	{ SGTL5000_DAP_AVC_THRESHOLD,		0x1473 },
 	{ SGTL5000_DAP_AVC_ATTACK,		0x0028 },
 	{ SGTL5000_DAP_AVC_DECAY,		0x0050 },
-- 
2.30.1

[PATCH AUTOSEL 5.11 13/44] ASoC: es8316: Simplify adc_pga_gain_tlv table

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit bb18c678754ce1514100fb4c0bf6113b5af36c48 ]

Most steps in this table are steps of 3dB (300 centi-dB), so we can
simplify the table.

This not only reduces the amount of space it takes inside the kernel,
this also makes alsa-lib's mixer code actually accept the table, where
as before this change alsa-lib saw the "ADC PGA Gain" control as a
control without a dB scale.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210228160441.241110-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/es8316.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c
index f9ec5cf82599..ec2f11ff8a84 100644
--- a/sound/soc/codecs/es8316.c
+++ b/sound/soc/codecs/es8316.c
@@ -63,13 +63,8 @@ static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(adc_pga_gain_tlv,
 	1, 1, TLV_DB_SCALE_ITEM(0, 0, 0),
 	2, 2, TLV_DB_SCALE_ITEM(250, 0, 0),
 	3, 3, TLV_DB_SCALE_ITEM(450, 0, 0),
-	4, 4, TLV_DB_SCALE_ITEM(700, 0, 0),
-	5, 5, TLV_DB_SCALE_ITEM(1000, 0, 0),
-	6, 6, TLV_DB_SCALE_ITEM(1300, 0, 0),
-	7, 7, TLV_DB_SCALE_ITEM(1600, 0, 0),
-	8, 8, TLV_DB_SCALE_ITEM(1800, 0, 0),
-	9, 9, TLV_DB_SCALE_ITEM(2100, 0, 0),
-	10, 10, TLV_DB_SCALE_ITEM(2400, 0, 0),
+	4, 7, TLV_DB_SCALE_ITEM(700, 300, 0),
+	8, 10, TLV_DB_SCALE_ITEM(1800, 300, 0),
 );
 
 static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(hpout_vol_tlv,
-- 
2.30.1

[PATCH AUTOSEL 5.11 14/44] ASoC: soc-core: Prevent warning if no DMI table is present

[Sasha Levin]

From: Jon Hunter <jonathanh@nvidia.com>

[ Upstream commit 7de14d581dbed57c2b3c6afffa2c3fdc6955a3cd ]

Many systems do not use ACPI and hence do not provide a DMI table. On
non-ACPI systems a warning, such as the following, is printed on boot.

 WARNING KERN tegra-audio-graph-card sound: ASoC: no DMI vendor name!

The variable 'dmi_available' is not exported and so currently cannot be
used by kernel modules without adding an accessor. However, it is
possible to use the function is_acpi_device_node() to determine if the
sound card is an ACPI device and hence indicate if we expect a DMI table
to be present. Therefore, call is_acpi_device_node() to see if we are
using ACPI and only parse the DMI table if we are booting with ACPI.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210303115526.419458-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index f6d4e99b590c..0cffc9527e28 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -31,6 +31,7 @@
 #include <linux/of.h>
 #include <linux/of_graph.h>
 #include <linux/dmi.h>
+#include <linux/acpi.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
@@ -1573,6 +1574,9 @@ int snd_soc_set_dmi_name(struct snd_soc_card *card, const char *flavour)
 	if (card->long_name)
 		return 0; /* long name already set by driver or from DMI */
 
+	if (!is_acpi_device_node(card->dev->fwnode))
+		return 0;
+
 	/* make up dmi long name as: vendor-product-version-board */
 	vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
 	if (!vendor || !is_dmi_valid(vendor)) {
-- 
2.30.1

[PATCH AUTOSEL 5.11 15/44] ASoC: cs42l42: Fix Bitclock polarity inversion

[Sasha Levin]

From: Lucas Tanure <tanureal@opensource.cirrus.com>

[ Upstream commit e793c965519b8b7f2fea51a48398405e2a501729 ]

The driver was setting bit clock polarity opposite to intended polarity.
Also simplify the code by grouping ADC and DAC clock configurations into
a single field.

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-2-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l42.c | 20 ++++++++------------
 sound/soc/codecs/cs42l42.h | 11 ++++++-----
 2 files changed, 14 insertions(+), 17 deletions(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 210fcbedf241..df0d5fec0287 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -797,27 +797,23 @@ static int cs42l42_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
 	/* Bitclock/frame inversion */
 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 	case SND_SOC_DAIFMT_NB_NF:
+		asp_cfg_val |= CS42L42_ASP_SCPOL_NOR << CS42L42_ASP_SCPOL_SHIFT;
 		break;
 	case SND_SOC_DAIFMT_NB_IF:
-		asp_cfg_val |= CS42L42_ASP_POL_INV <<
-				CS42L42_ASP_LCPOL_IN_SHIFT;
+		asp_cfg_val |= CS42L42_ASP_SCPOL_NOR << CS42L42_ASP_SCPOL_SHIFT;
+		asp_cfg_val |= CS42L42_ASP_LCPOL_INV << CS42L42_ASP_LCPOL_SHIFT;
 		break;
 	case SND_SOC_DAIFMT_IB_NF:
-		asp_cfg_val |= CS42L42_ASP_POL_INV <<
-				CS42L42_ASP_SCPOL_IN_DAC_SHIFT;
 		break;
 	case SND_SOC_DAIFMT_IB_IF:
-		asp_cfg_val |= CS42L42_ASP_POL_INV <<
-				CS42L42_ASP_LCPOL_IN_SHIFT;
-		asp_cfg_val |= CS42L42_ASP_POL_INV <<
-				CS42L42_ASP_SCPOL_IN_DAC_SHIFT;
+		asp_cfg_val |= CS42L42_ASP_LCPOL_INV << CS42L42_ASP_LCPOL_SHIFT;
 		break;
 	}
 
-	snd_soc_component_update_bits(component, CS42L42_ASP_CLK_CFG,
-				CS42L42_ASP_MODE_MASK |
-				CS42L42_ASP_SCPOL_IN_DAC_MASK |
-				CS42L42_ASP_LCPOL_IN_MASK, asp_cfg_val);
+	snd_soc_component_update_bits(component, CS42L42_ASP_CLK_CFG, CS42L42_ASP_MODE_MASK |
+								      CS42L42_ASP_SCPOL_MASK |
+								      CS42L42_ASP_LCPOL_MASK,
+								      asp_cfg_val);
 
 	return 0;
 }
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 9e3cc528dcff..1f0d67c95a9a 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -258,11 +258,12 @@
 #define CS42L42_ASP_SLAVE_MODE		0x00
 #define CS42L42_ASP_MODE_SHIFT		4
 #define CS42L42_ASP_MODE_MASK		(1 << CS42L42_ASP_MODE_SHIFT)
-#define CS42L42_ASP_SCPOL_IN_DAC_SHIFT	2
-#define CS42L42_ASP_SCPOL_IN_DAC_MASK	(1 << CS42L42_ASP_SCPOL_IN_DAC_SHIFT)
-#define CS42L42_ASP_LCPOL_IN_SHIFT	0
-#define CS42L42_ASP_LCPOL_IN_MASK	(1 << CS42L42_ASP_LCPOL_IN_SHIFT)
-#define CS42L42_ASP_POL_INV		1
+#define CS42L42_ASP_SCPOL_SHIFT		2
+#define CS42L42_ASP_SCPOL_MASK		(3 << CS42L42_ASP_SCPOL_SHIFT)
+#define CS42L42_ASP_SCPOL_NOR		3
+#define CS42L42_ASP_LCPOL_SHIFT		0
+#define CS42L42_ASP_LCPOL_MASK		(3 << CS42L42_ASP_LCPOL_SHIFT)
+#define CS42L42_ASP_LCPOL_INV		3
 
 #define CS42L42_ASP_FRM_CFG		(CS42L42_PAGE_12 + 0x08)
 #define CS42L42_ASP_STP_SHIFT		4
-- 
2.30.1

[PATCH AUTOSEL 5.11 16/44] ASoC: cs42l42: Fix channel width support

[Sasha Levin]

From: Lucas Tanure <tanureal@opensource.cirrus.com>

[ Upstream commit 2bdc4f5c6838f7c3feb4fe68e4edbeea158ec0a2 ]

Remove the hard coded 32 bits width and replace with the correct width
calculated by params_width.

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-3-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l42.c | 47 ++++++++++++++++++--------------------
 sound/soc/codecs/cs42l42.h |  1 -
 2 files changed, 22 insertions(+), 26 deletions(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index df0d5fec0287..4f9ad9547929 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -691,24 +691,6 @@ static int cs42l42_pll_config(struct snd_soc_component *component)
 					CS42L42_CLK_OASRC_SEL_MASK,
 					CS42L42_CLK_OASRC_SEL_12 <<
 					CS42L42_CLK_OASRC_SEL_SHIFT);
-			/* channel 1 on low LRCLK, 32 bit */
-			snd_soc_component_update_bits(component,
-					CS42L42_ASP_RX_DAI0_CH1_AP_RES,
-					CS42L42_ASP_RX_CH_AP_MASK |
-					CS42L42_ASP_RX_CH_RES_MASK,
-					(CS42L42_ASP_RX_CH_AP_LOW <<
-					CS42L42_ASP_RX_CH_AP_SHIFT) |
-					(CS42L42_ASP_RX_CH_RES_32 <<
-					CS42L42_ASP_RX_CH_RES_SHIFT));
-			/* Channel 2 on high LRCLK, 32 bit */
-			snd_soc_component_update_bits(component,
-					CS42L42_ASP_RX_DAI0_CH2_AP_RES,
-					CS42L42_ASP_RX_CH_AP_MASK |
-					CS42L42_ASP_RX_CH_RES_MASK,
-					(CS42L42_ASP_RX_CH_AP_HI <<
-					CS42L42_ASP_RX_CH_AP_SHIFT) |
-					(CS42L42_ASP_RX_CH_RES_32 <<
-					CS42L42_ASP_RX_CH_RES_SHIFT));
 			if (pll_ratio_table[i].mclk_src_sel == 0) {
 				/* Pass the clock straight through */
 				snd_soc_component_update_bits(component,
@@ -824,14 +806,29 @@ static int cs42l42_pcm_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_component *component = dai->component;
 	struct cs42l42_private *cs42l42 = snd_soc_component_get_drvdata(component);
-	int retval;
+	unsigned int width = (params_width(params) / 8) - 1;
+	unsigned int val = 0;
 
 	cs42l42->srate = params_rate(params);
-	cs42l42->swidth = params_width(params);
 
-	retval = cs42l42_pll_config(component);
+	switch(substream->stream) {
+	case SNDRV_PCM_STREAM_PLAYBACK:
+		val |= width << CS42L42_ASP_RX_CH_RES_SHIFT;
+		/* channel 1 on low LRCLK */
+		snd_soc_component_update_bits(component, CS42L42_ASP_RX_DAI0_CH1_AP_RES,
+							 CS42L42_ASP_RX_CH_AP_MASK |
+							 CS42L42_ASP_RX_CH_RES_MASK, val);
+		/* Channel 2 on high LRCLK */
+		val |= CS42L42_ASP_RX_CH_AP_HI << CS42L42_ASP_RX_CH_AP_SHIFT;
+		snd_soc_component_update_bits(component, CS42L42_ASP_RX_DAI0_CH2_AP_RES,
+							 CS42L42_ASP_RX_CH_AP_MASK |
+							 CS42L42_ASP_RX_CH_RES_MASK, val);
+		break;
+	default:
+		break;
+	}
 
-	return retval;
+	return cs42l42_pll_config(component);
 }
 
 static int cs42l42_set_sysclk(struct snd_soc_dai *dai,
@@ -896,9 +893,9 @@ static int cs42l42_mute(struct snd_soc_dai *dai, int mute, int direction)
 	return 0;
 }
 
-#define CS42L42_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S18_3LE | \
-			SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE | \
-			SNDRV_PCM_FMTBIT_S32_LE)
+#define CS42L42_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+			 SNDRV_PCM_FMTBIT_S24_LE |\
+			 SNDRV_PCM_FMTBIT_S32_LE )
 
 
 static const struct snd_soc_dai_ops cs42l42_ops = {
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 1f0d67c95a9a..9b017b76828a 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -757,7 +757,6 @@ struct  cs42l42_private {
 	struct completion pdn_done;
 	u32 sclk;
 	u32 srate;
-	u32 swidth;
 	u8 plug_state;
 	u8 hs_type;
 	u8 ts_inv;
-- 
2.30.1

[PATCH AUTOSEL 5.11 17/44] ASoC: cs42l42: Fix mixer volume control

[Sasha Levin]

From: Lucas Tanure <tanureal@opensource.cirrus.com>

[ Upstream commit 72d904763ae6a8576e7ad034f9da4f0e3c44bf24 ]

The minimum value is 0x3f (-63dB), which also is mute

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-4-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l42.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 4f9ad9547929..d5078ce79fad 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -401,7 +401,7 @@ static const struct regmap_config cs42l42_regmap = {
 };
 
 static DECLARE_TLV_DB_SCALE(adc_tlv, -9600, 100, false);
-static DECLARE_TLV_DB_SCALE(mixer_tlv, -6200, 100, false);
+static DECLARE_TLV_DB_SCALE(mixer_tlv, -6300, 100, true);
 
 static const char * const cs42l42_hpf_freq_text[] = {
 	"1.86Hz", "120Hz", "235Hz", "466Hz"
@@ -458,7 +458,7 @@ static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
 				CS42L42_DAC_HPF_EN_SHIFT, true, false),
 	SOC_DOUBLE_R_TLV("Mixer Volume", CS42L42_MIXER_CHA_VOL,
 			 CS42L42_MIXER_CHB_VOL, CS42L42_MIXER_CH_VOL_SHIFT,
-				0x3e, 1, mixer_tlv)
+				0x3f, 1, mixer_tlv)
 };
 
 static int cs42l42_hpdrv_evt(struct snd_soc_dapm_widget *w,
-- 
2.30.1

[PATCH AUTOSEL 5.11 18/44] ASoC: cs42l42: Always wait at least 3ms after reset

[Sasha Levin]

From: Lucas Tanure <tanureal@opensource.cirrus.com>

[ Upstream commit 19325cfea04446bc79b36bffd4978af15f46a00e ]

This delay is part of the power-up sequence defined in the datasheet.
A runtime_resume is a power-up so must also include the delay.

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-6-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l42.c | 3 ++-
 sound/soc/codecs/cs42l42.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index d5078ce79fad..4d82d24c7828 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -1794,7 +1794,7 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
 		dev_dbg(&i2c_client->dev, "Found reset GPIO\n");
 		gpiod_set_value_cansleep(cs42l42->reset_gpio, 1);
 	}
-	mdelay(3);
+	usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2);
 
 	/* Request IRQ */
 	ret = devm_request_threaded_irq(&i2c_client->dev,
@@ -1919,6 +1919,7 @@ static int cs42l42_runtime_resume(struct device *dev)
 	}
 
 	gpiod_set_value_cansleep(cs42l42->reset_gpio, 1);
+	usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2);
 
 	regcache_cache_only(cs42l42->regmap, false);
 	regcache_sync(cs42l42->regmap);
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 9b017b76828a..866d7c873e3c 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -740,6 +740,7 @@
 #define CS42L42_FRAC2_VAL(val)	(((val) & 0xff0000) >> 16)
 
 #define CS42L42_NUM_SUPPLIES	5
+#define CS42L42_BOOT_TIME_US	3000
 
 static const char *const cs42l42_supply_names[CS42L42_NUM_SUPPLIES] = {
 	"VA",
-- 
2.30.1

[PATCH AUTOSEL 5.11 20/44] ASoC: mediatek: mt8192: fix tdm out data is valid on rising edge

[Sasha Levin]

From: Jiaxin Yu <jiaxin.yu@mediatek.com>

[ Upstream commit 8d06b9633a66f41fed520f6eebd163189518ba79 ]

This patch correct tdm out bck inverse register to AUDIO_TOP_CON3[3].

Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/1615516005-781-1-git-send-email-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/mediatek/mt8192/mt8192-dai-tdm.c | 4 +++-
 sound/soc/mediatek/mt8192/mt8192-reg.h     | 8 +++++---
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/sound/soc/mediatek/mt8192/mt8192-dai-tdm.c b/sound/soc/mediatek/mt8192/mt8192-dai-tdm.c
index 8383536b7ae0..504293de2c0d 100644
--- a/sound/soc/mediatek/mt8192/mt8192-dai-tdm.c
+++ b/sound/soc/mediatek/mt8192/mt8192-dai-tdm.c
@@ -555,7 +555,9 @@ static int mtk_dai_tdm_hw_params(struct snd_pcm_substream *substream,
 
 	/* set tdm */
 	if (tdm_priv->bck_invert)
-		tdm_con |= 1 << BCK_INVERSE_SFT;
+		regmap_update_bits(afe->regmap, AUDIO_TOP_CON3,
+				   BCK_INVERSE_MASK_SFT,
+				   0x1 << BCK_INVERSE_SFT);
 
 	if (tdm_priv->lck_invert)
 		tdm_con |= 1 << LRCK_INVERSE_SFT;
diff --git a/sound/soc/mediatek/mt8192/mt8192-reg.h b/sound/soc/mediatek/mt8192/mt8192-reg.h
index 562f25c79c34..b9fb80d4afec 100644
--- a/sound/soc/mediatek/mt8192/mt8192-reg.h
+++ b/sound/soc/mediatek/mt8192/mt8192-reg.h
@@ -21,6 +21,11 @@ enum {
 /*****************************************************************************
  *                  R E G I S T E R       D E F I N I T I O N
  *****************************************************************************/
+/* AUDIO_TOP_CON3 */
+#define BCK_INVERSE_SFT                              3
+#define BCK_INVERSE_MASK                             0x1
+#define BCK_INVERSE_MASK_SFT                         (0x1 << 3)
+
 /* AFE_DAC_CON0 */
 #define VUL12_ON_SFT                                   31
 #define VUL12_ON_MASK                                  0x1
@@ -2079,9 +2084,6 @@ enum {
 #define TDM_EN_SFT                                     0
 #define TDM_EN_MASK                                    0x1
 #define TDM_EN_MASK_SFT                                (0x1 << 0)
-#define BCK_INVERSE_SFT                                1
-#define BCK_INVERSE_MASK                               0x1
-#define BCK_INVERSE_MASK_SFT                           (0x1 << 1)
 #define LRCK_INVERSE_SFT                               2
 #define LRCK_INVERSE_MASK                              0x1
 #define LRCK_INVERSE_MASK_SFT                          (0x1 << 2)
-- 
2.30.1

[PATCH AUTOSEL 5.11 31/44] ASoC: rt5659: Update MCLK rate in set_sysclk()

[Sasha Levin]

From: Sameer Pujar <spujar@nvidia.com>

[ Upstream commit dbf54a9534350d6aebbb34f5c1c606b81a4f35dd ]

Simple-card/audio-graph-card drivers do not handle MCLK clock when it
is specified in the codec device node. The expectation here is that,
the codec should actually own up the MCLK clock and do necessary setup
in the driver.

Suggested-by: Mark Brown <broonie@kernel.org>
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1615829492-8972-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5659.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/codecs/rt5659.c b/sound/soc/codecs/rt5659.c
index 41e5917b16a5..91a4ef7f620c 100644
--- a/sound/soc/codecs/rt5659.c
+++ b/sound/soc/codecs/rt5659.c
@@ -3426,12 +3426,17 @@ static int rt5659_set_component_sysclk(struct snd_soc_component *component, int
 {
 	struct rt5659_priv *rt5659 = snd_soc_component_get_drvdata(component);
 	unsigned int reg_val = 0;
+	int ret;
 
 	if (freq == rt5659->sysclk && clk_id == rt5659->sysclk_src)
 		return 0;
 
 	switch (clk_id) {
 	case RT5659_SCLK_S_MCLK:
+		ret = clk_set_rate(rt5659->mclk, freq);
+		if (ret)
+			return ret;
+
 		reg_val |= RT5659_SCLK_SRC_MCLK;
 		break;
 	case RT5659_SCLK_S_PLL1:
-- 
2.30.1

[PATCH AUTOSEL 5.11 32/44] ASoC: rt711: add snd_soc_component remove callback

[Sasha Levin]

From: Bard Liao <yung-chuan.liao@linux.intel.com>

[ Upstream commit 899b12542b0897f92de9ba30944937c39ebb246d ]

We do some IO operations in the snd_soc_component_set_jack callback
function and snd_soc_component_set_jack() will be called when soc
component is removed. However, we should not access SoundWire registers
when the bus is suspended.
So set regcache_cache_only(regmap, true) to avoid accessing in the
soc component removal process.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210316005254.29699-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt711.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/soc/codecs/rt711.c b/sound/soc/codecs/rt711.c
index 85f744184a60..047f4e677d78 100644
--- a/sound/soc/codecs/rt711.c
+++ b/sound/soc/codecs/rt711.c
@@ -895,6 +895,13 @@ static int rt711_probe(struct snd_soc_component *component)
 	return 0;
 }
 
+static void rt711_remove(struct snd_soc_component *component)
+{
+	struct rt711_priv *rt711 = snd_soc_component_get_drvdata(component);
+
+	regcache_cache_only(rt711->regmap, true);
+}
+
 static const struct snd_soc_component_driver soc_codec_dev_rt711 = {
 	.probe = rt711_probe,
 	.set_bias_level = rt711_set_bias_level,
@@ -905,6 +912,7 @@ static const struct snd_soc_component_driver soc_codec_dev_rt711 = {
 	.dapm_routes = rt711_audio_map,
 	.num_dapm_routes = ARRAY_SIZE(rt711_audio_map),
 	.set_jack = rt711_set_jack_detect,
+	.remove = rt711_remove,
 };
 
 static int rt711_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream,
-- 
2.30.1