From: <derek.fang@realtek.com>
To: <broonie@kernel.org>, <lgirdwood@gmail.com>
Cc: oder_chiou@realtek.com, jack.yu@realtek.com,
alsa-devel@alsa-project.org, lars@metafoo.de,
albertchen@realtek.com, Derek Fang <derek.fang@realtek.com>,
shumingf@realtek.com, flove@realtek.com
Subject: [PATCH 1/2] ASoC: rt5682: Avoid the unexpected IRQ event during going to suspend
Date: Tue, 9 Nov 2021 17:54:49 +0800 [thread overview]
Message-ID: <20211109095450.12950-1-derek.fang@realtek.com> (raw)
From: Derek Fang <derek.fang@realtek.com>
When the system suspends, the codec driver will set SAR to
power saving mode if a headset is plugged in.
There is a chance to generate an unexpected IRQ, and leads to
issues after resuming such as noise from OMTP type headsets.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
---
sound/soc/codecs/rt5682.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index 78b4cb5fb6c8..a486ac268c33 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -48,6 +48,7 @@ static const struct reg_sequence patch_list[] = {
{RT5682_SAR_IL_CMD_6, 0x0110},
{RT5682_CHARGE_PUMP_1, 0x0210},
{RT5682_HP_LOGIC_CTRL_2, 0x0007},
+ {RT5682_SAR_IL_CMD_2, 0xac00},
};
void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev)
@@ -2943,9 +2944,6 @@ static int rt5682_suspend(struct snd_soc_component *component)
cancel_delayed_work_sync(&rt5682->jack_detect_work);
cancel_delayed_work_sync(&rt5682->jd_check_work);
if (rt5682->hs_jack && rt5682->jack_type == SND_JACK_HEADSET) {
- snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
- RT5682_MB1_PATH_MASK | RT5682_MB2_PATH_MASK,
- RT5682_CTRL_MB1_REG | RT5682_CTRL_MB2_REG);
val = snd_soc_component_read(component,
RT5682_CBJ_CTRL_2) & RT5682_JACK_TYPE_MASK;
@@ -2967,10 +2965,15 @@ static int rt5682_suspend(struct snd_soc_component *component)
/* enter SAR ADC power saving mode */
snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK |
- RT5682_SAR_BUTDET_RST_MASK | RT5682_SAR_SEL_MB1_MB2_MASK, 0);
+ RT5682_SAR_SEL_MB1_MB2_MASK, 0);
+ usleep_range(5000, 6000);
+ snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
+ RT5682_MB1_PATH_MASK | RT5682_MB2_PATH_MASK,
+ RT5682_CTRL_MB1_REG | RT5682_CTRL_MB2_REG);
+ usleep_range(10000, 12000);
snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
- RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK | RT5682_SAR_BUTDET_RST_MASK,
- RT5682_SAR_BUTT_DET_EN | RT5682_SAR_BUTDET_POW_SAV | RT5682_SAR_BUTDET_RST_NORMAL);
+ RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK,
+ RT5682_SAR_BUTT_DET_EN | RT5682_SAR_BUTDET_POW_SAV);
}
regcache_cache_only(rt5682->regmap, true);
--
2.17.1
next reply other threads:[~2021-11-09 9:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-09 9:54 derek.fang [this message]
2021-11-09 9:54 ` [PATCH 2/2] ASoC: rt5682: Re-detect the combo jack after resuming derek.fang
2021-11-12 21:27 ` [PATCH 1/2] ASoC: rt5682: Avoid the unexpected IRQ event during going to suspend Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211109095450.12950-1-derek.fang@realtek.com \
--to=derek.fang@realtek.com \
--cc=albertchen@realtek.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=flove@realtek.com \
--cc=jack.yu@realtek.com \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=oder_chiou@realtek.com \
--cc=shumingf@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox