From: <derek.fang@realtek.com>
To: <broonie@kernel.org>, <lgirdwood@gmail.com>
Cc: oder_chiou@realtek.com, jack.yu@realtek.com,
alsa-devel@alsa-project.org, lars@metafoo.de,
albertchen@realtek.com, Derek Fang <derek.fang@realtek.com>,
shumingf@realtek.com, flove@realtek.com
Subject: [PATCH 2/2] ASoC: rt5682: Re-detect the combo jack after resuming
Date: Tue, 9 Nov 2021 17:54:50 +0800 [thread overview]
Message-ID: <20211109095450.12950-2-derek.fang@realtek.com> (raw)
In-Reply-To: <20211109095450.12950-1-derek.fang@realtek.com>
From: Derek Fang <derek.fang@realtek.com>
Sometimes, end-users change the jack type under suspending,
so it needs to re-detect the combo jack type after resuming to
avoid any unexpected behaviors.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
---
sound/soc/codecs/rt5682-i2c.c | 1 +
sound/soc/codecs/rt5682.c | 23 ++++++++++++++++++++---
sound/soc/codecs/rt5682.h | 1 +
3 files changed, 22 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/rt5682-i2c.c b/sound/soc/codecs/rt5682-i2c.c
index a30e42932cf7..fdf7d4005760 100644
--- a/sound/soc/codecs/rt5682-i2c.c
+++ b/sound/soc/codecs/rt5682-i2c.c
@@ -198,6 +198,7 @@ static int rt5682_i2c_probe(struct i2c_client *i2c,
}
mutex_init(&rt5682->calibrate_mutex);
+ mutex_init(&rt5682->jdet_mutex);
rt5682_calibrate(rt5682);
rt5682_apply_patch_list(rt5682, &i2c->dev);
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index a486ac268c33..04cb747c2b12 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -49,6 +49,7 @@ static const struct reg_sequence patch_list[] = {
{RT5682_CHARGE_PUMP_1, 0x0210},
{RT5682_HP_LOGIC_CTRL_2, 0x0007},
{RT5682_SAR_IL_CMD_2, 0xac00},
+ {RT5682_CBJ_CTRL_7, 0x0104},
};
void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev)
@@ -941,6 +942,10 @@ int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert)
snd_soc_component_update_bits(component,
RT5682_HP_CHARGE_PUMP_1,
RT5682_OSW_L_MASK | RT5682_OSW_R_MASK, 0);
+ rt5682_enable_push_button_irq(component, false);
+ snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
+ RT5682_TRIG_JD_MASK, RT5682_TRIG_JD_LOW);
+ usleep_range(55000, 60000);
snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
RT5682_TRIG_JD_MASK, RT5682_TRIG_JD_HIGH);
@@ -1093,6 +1098,7 @@ void rt5682_jack_detect_handler(struct work_struct *work)
while (!rt5682->component->card->instantiated)
usleep_range(10000, 15000);
+ mutex_lock(&rt5682->jdet_mutex);
mutex_lock(&rt5682->calibrate_mutex);
val = snd_soc_component_read(rt5682->component, RT5682_AJD1_CTRL)
@@ -1166,6 +1172,7 @@ void rt5682_jack_detect_handler(struct work_struct *work)
}
mutex_unlock(&rt5682->calibrate_mutex);
+ mutex_unlock(&rt5682->jdet_mutex);
}
EXPORT_SYMBOL_GPL(rt5682_jack_detect_handler);
@@ -1515,6 +1522,7 @@ static int rt5682_hp_event(struct snd_soc_dapm_widget *w,
{
struct snd_soc_component *component =
snd_soc_dapm_to_component(w->dapm);
+ struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
@@ -1526,12 +1534,17 @@ static int rt5682_hp_event(struct snd_soc_dapm_widget *w,
RT5682_DEPOP_1, 0x60, 0x60);
snd_soc_component_update_bits(component,
RT5682_DAC_ADC_DIG_VOL1, 0x00c0, 0x0080);
+
+ mutex_lock(&rt5682->jdet_mutex);
+
snd_soc_component_update_bits(component, RT5682_HP_CTRL_2,
RT5682_HP_C2_DAC_L_EN | RT5682_HP_C2_DAC_R_EN,
RT5682_HP_C2_DAC_L_EN | RT5682_HP_C2_DAC_R_EN);
usleep_range(5000, 10000);
snd_soc_component_update_bits(component, RT5682_CHARGE_PUMP_1,
RT5682_CP_SW_SIZE_MASK, RT5682_CP_SW_SIZE_L);
+
+ mutex_unlock(&rt5682->jdet_mutex);
break;
case SND_SOC_DAPM_POST_PMD:
@@ -2943,7 +2956,7 @@ static int rt5682_suspend(struct snd_soc_component *component)
cancel_delayed_work_sync(&rt5682->jack_detect_work);
cancel_delayed_work_sync(&rt5682->jd_check_work);
- if (rt5682->hs_jack && rt5682->jack_type == SND_JACK_HEADSET) {
+ if (rt5682->hs_jack && (rt5682->jack_type & SND_JACK_HEADSET) == SND_JACK_HEADSET) {
val = snd_soc_component_read(component,
RT5682_CBJ_CTRL_2) & RT5682_JACK_TYPE_MASK;
@@ -2974,6 +2987,8 @@ static int rt5682_suspend(struct snd_soc_component *component)
snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK,
RT5682_SAR_BUTT_DET_EN | RT5682_SAR_BUTDET_POW_SAV);
+ snd_soc_component_update_bits(component, RT5682_HP_CHARGE_PUMP_1,
+ RT5682_OSW_L_MASK | RT5682_OSW_R_MASK, 0);
}
regcache_cache_only(rt5682->regmap, true);
@@ -2991,10 +3006,11 @@ static int rt5682_resume(struct snd_soc_component *component)
regcache_cache_only(rt5682->regmap, false);
regcache_sync(rt5682->regmap);
- if (rt5682->hs_jack && rt5682->jack_type == SND_JACK_HEADSET) {
+ if (rt5682->hs_jack && (rt5682->jack_type & SND_JACK_HEADSET) == SND_JACK_HEADSET) {
snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
RT5682_SAR_BUTDET_MODE_MASK | RT5682_SAR_SEL_MB1_MB2_MASK,
RT5682_SAR_BUTDET_POW_NORM | RT5682_SAR_SEL_MB1_MB2_AUTO);
+ usleep_range(5000, 6000);
snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
RT5682_MB1_PATH_MASK | RT5682_MB2_PATH_MASK,
RT5682_CTRL_MB1_FSM | RT5682_CTRL_MB2_FSM);
@@ -3002,8 +3018,9 @@ static int rt5682_resume(struct snd_soc_component *component)
RT5682_PWR_CBJ, RT5682_PWR_CBJ);
}
+ rt5682->jack_type = 0;
mod_delayed_work(system_power_efficient_wq,
- &rt5682->jack_detect_work, msecs_to_jiffies(250));
+ &rt5682->jack_detect_work, msecs_to_jiffies(0));
return 0;
}
diff --git a/sound/soc/codecs/rt5682.h b/sound/soc/codecs/rt5682.h
index d93829c35585..c917c76200ea 100644
--- a/sound/soc/codecs/rt5682.h
+++ b/sound/soc/codecs/rt5682.h
@@ -1463,6 +1463,7 @@ struct rt5682_priv {
int jack_type;
int irq_work_delay_time;
+ struct mutex jdet_mutex;
};
extern const char *rt5682_supply_names[RT5682_NUM_SUPPLIES];
--
2.17.1
next prev parent reply other threads:[~2021-11-09 9:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-09 9:54 [PATCH 1/2] ASoC: rt5682: Avoid the unexpected IRQ event during going to suspend derek.fang
2021-11-09 9:54 ` derek.fang [this message]
2021-11-12 21:27 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211109095450.12950-2-derek.fang@realtek.com \
--to=derek.fang@realtek.com \
--cc=albertchen@realtek.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=flove@realtek.com \
--cc=jack.yu@realtek.com \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=oder_chiou@realtek.com \
--cc=shumingf@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox