[PATCH 2/3] ASoC: SOF: Intel: hda-loader: Make sure that the fw load sequence is followed

[Peter Ujfalusi <peter.ujfalusi@linux.intel.com>]

The hda_dsp_enable_core() is powering up _and_ unstall the core in one
call while the first step of the firmware loading  must not unstall the
core.
The core can be unstalled only after the set cpb_cfp and the configuration
of the IPC register for the ROM_CONTROL message.

Complements: 2a68ff846164 ("ASoC: SOF: Intel: hda: Revisit IMR boot sequence")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
---
 sound/soc/sof/intel/hda-loader.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c
index 64290125d7cd..103e62bcfa82 100644
--- a/sound/soc/sof/intel/hda-loader.c
+++ b/sound/soc/sof/intel/hda-loader.c
@@ -110,7 +110,7 @@ static int cl_dsp_init(struct snd_sof_dev *sdev, int stream_tag, bool imr_boot)
 	int ret;
 
 	/* step 1: power up corex */
-	ret = hda_dsp_enable_core(sdev, chip->host_managed_cores_mask);
+	ret = hda_dsp_core_power_up(sdev, chip->host_managed_cores_mask);
 	if (ret < 0) {
 		if (hda->boot_iteration == HDA_FW_BOOT_ATTEMPTS)
 			dev_err(sdev->dev, "error: dsp core 0/1 power up failed\n");
-- 
2.36.1